summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/renesas
AgeCommit message (Collapse)Author
2023-05-02Merge tag 'pinctrl-v6.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and the new NXP S32 and nVidia BlueField-3. Core changes: - Make a lot of pin controllers with GPIO and irqchips immutable, i.e. not living structs, but const structs. This is driving a changed initiated by the irqchip maintainers. New drivers: - New driver for the NXP S32 SoC pin controller - As part of a thorough cleanup and restructuring of the Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were folded into the Mediatek directory and the family is renamed "mtmips". The Ralink chips live on as Mediatek MIPS family where new variants can be added. As part of this work also the device tree bindings were reworked. - New subdriver for the Qualcomm SM7150 SoC. - New subdriver for the Qualcomm IPQ9574 SoC. - New driver for the nVidia BlueField-3 SoC. - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO. - Support for the Qualcomm PMI632 mixed signal circuit GPIO. Improvements: - Add some missing pins and generic cleanups on the Renesas r8a779g0 and r8a779g0 pin controllers. Generic Renesas extension for power source selection on several SoCs. - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver. - Several device tree binding cleanups as the binding YAML syntax is solidifying" * tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits) pinctrl-bcm2835.c: fix race condition when setting gpio dir dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2" dt-bindings: pinctrl: qcom: Add few missing functions pinctrl: qcom: spmi-gpio: Add PMI632 support dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 pinctrl: wpcm450: select MFD_SYSCON pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip pinctrl: qcom spmi-mpp: Convert to immutable irq_chip pinctrl: plgpio: Convert to immutable irq_chip pinctrl: pistachio: Convert to immutable irq_chip pinctrl: pic32: Convert to immutable irq_chip pinctrl: sx150x: Convert to immutable irq_chip pinctrl: stmfx: Convert to immutable irq_chip pinctrl: st: Convert to immutable irq_chip pinctrl: mcp23s08: Convert to immutable irq_chip pinctrl: equilibrium: Convert to immutable irq_chip pinctrl: npcm7xx: Convert to immutable irq_chip pinctrl: armada-37xx: Convert to immutable irq_chip pinctrl: nsp: Convert to immutable irq_chip ...
2023-04-13pinctrl: renesas: remove MODULE_LICENSE in non-modulesNick Alcock
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-30pinctrl: renesas: core: Drop unneeded #ifdef CONFIG_OFGeert Uytterhoeven
As the of_node member of struct device always exists, and there is a dummy of of_device_get_match_data() for the !CONFIG_OF case, there is no longer a need to protect code using these interfaces with an #ifdef. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/55d72ce46b43ec2f41681cb5ba7ca7fcebdb98d1.1679416005.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a7779: Add PWM pins, groups, and functionsGeert Uytterhoeven
Add pins, groups, and functions for the PWM Timers on the Renesas R-Car H1 (R8A7779) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/cea9723e9c3df4b1408750caa38886aac1fab5f7.1679329090.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a7779: Add bias pinconf supportGeert Uytterhoeven
Implement support for pull-up handling for the R-Car H1 SoC, using the common R-Car bias handling. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/dd966cfc916ef881051ec53bc3393dce7eea8e03.1679328215.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: Annotate sentinels in tablesGeert Uytterhoeven
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Hence drop all such commas. Add comments to clarify the purpose of the empty elements. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/845f1d8285dd44522af1b0f429d4c6bd4759eb9e.1678272180.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a779g0: Add support for AVB/TSN power-sourcesGeert Uytterhoeven
Add support for configuring the I/O voltage levels of the Ethernet AVB and Ethernet TSN pins on the R-Car V4H SoC. "PIN_VDDQ_AVB[012]" and "PIN_VDDQ_TSN0" can be configured for 1.8V or 2.5V operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c046e0be7d26302061d7aa629180a451734ddf8f.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a77995: Add support for AVB power-sourceGeert Uytterhoeven
Add support for configuring the I/O voltage level of the Ethernet AVB pins on the R-Car D3 SoC. "PIN_VDDQ_AVB0" can be configured for 2.5V or 3.3V operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/8f9164487715d8a4898ca651038c0b4d5013764c.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a77990: Add support for AVB power-sourceGeert Uytterhoeven
Add support for configuring the I/O voltage level of the Ethernet AVB pins on the R-Car E3 SoC. "PIN_VDDQ_AVB0" can be configured for 2.5V or 3.3V operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/57883cd2d94c7919dc0f0db07cf6169ca89538e6.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a77980: Add support for AVB/GE power-sourcesGeert Uytterhoeven
Add support for configuring the I/O voltage levels of the Ethernet AVB and Gigabit Ethernet pins on the R-Car V3H SoC. "PIN_VDDQ_AVB" and "PIN_VDDQ_GE" can be configured for 2.5V or 3.3V operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3c26c4f3735a6d071685c507c065172e63af5d70.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a77970: Add support for AVB power-sourceGeert Uytterhoeven
Add support for configuring the I/O voltage level of the Ethernet AVB pins on the R-Car V3M SoC. "PIN_VDDQ_AVB0" can be configured for 2.5V or 3.3V operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/eb4db82bdeb67507a1a77f63b9d90280d6f38ba4.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: Add support for 1.8V/2.5V I/O voltage levelsGeert Uytterhoeven
Currently, the Renesas pin control driver supports pins that can switch their I/O voltage levels between either 1.8V and 3.3V, or between 2.5V and 3.3V. However, some SoCs have pins that can switch between 1.8V and 2.5V. Add support for this by replacing the separate SH_PFC_PIN_CFG_IO_VOLTAGE capability and voltage level flags by a 2-bit field, to cover three possible I/O voltage switching options. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/0c04925457bf3f7e78e7e3851528d9a4c29246da.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: rcar: Phase out old SH_PFC_PIN_CFG_IO_VOLTAGE flagGeert Uytterhoeven
Commit 537db25ca330dce0 ("pinctrl: renesas: Add I/O voltage level flag") introduced new flags to support pins that can switch their voltage levels between either 1.8V and 3.3V, or between 2.5V and 3.3V. The old SH_PFC_PIN_CFG_IO_VOLTAGE flag was retained to avoid having to change existing drivers. Replace SH_PFC_PIN_CFG_IO_VOLTAGE by SH_PFC_PIN_CFG_IO_VOLTAGE_18_33, to make the voltage configuration explicit, and to prepare for the advent of support for more voltage levels. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/ae5f879c093f3e3cd50ba1495975bccfad81237b.1678271030.git.geert+renesas@glider.be
2023-03-30pinctrl: renesas: r8a77995: Retain POCCTRL0 register across suspend/resumeGeert Uytterhoeven
The POC Control Register 0 (POCCTRL0) on R-Car D3 is not registered in the pinmux_ioctrl_regs[] array. Hence it is not saved/restored during suspend/resume, and its contents may be lost after s2ram. This went unnoticed when improving suspend/resume support in commit d92ee9cf8ec8d7fe ("pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register across suspend/resume"). Fix this by moving the pinmux_ioctrl_regs[] array up, and adding the POCCTRL0 register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/d17402b83b1f3fa0f572527c0382027bccb86205.1678271030.git.geert+renesas@glider.be
2023-03-16pinctrl: renesas: Drop support for Renesas-specific propertiesGeert Uytterhoeven
The last user of the Renesas-specific properties was converted to the standard properties in commit af897250ea54c6f2 ("ARM: dts: gose: use generic pinctrl properties in SDHI nodes") in v4.10. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/ff9c14781110bbf19b56b45dd1f01e6da90319ad.1678704441.git.geert+renesas@glider.be
2023-03-10pinctrl: renesas: Remove R-Car H3 ES1.* handlingWolfram Sang
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230307105645.5285-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10pinctrl: renesas: r8a779g0: Fix ERROROUTC function namesGeert Uytterhoeven
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, the ERROROUTC signal is active-low. Hence add the missing "_N" suffix to the pin function's names. Resize column 2 of all IPxSR* definitions to accomodate the longer names. Fixes: b811062e5fd0343c ("pinctrl: renesas: r8a779g0: Add missing ERROROUTC_A") Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1774303989e7d61f08fa81f1c2fa1b394505645f.1669036423.git.geert+renesas@glider.be
2023-03-10pinctrl: renesas: r8a779g0: Fix Group 6/7 pin functionsGeert Uytterhoeven
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin groups 6 and 7 do not use Module Select Registers to configure pin functions. Hence: - Remove the non-existent Module Select Registers (MODSEL[67]), - Correct the affected PINMUX definitions. Fixes: 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx") Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/06972cafd0efa4cfb395cfa76000a1bdae5e9e73.1669036423.git.geert+renesas@glider.be
2023-03-10pinctrl: renesas: r8a779g0: Fix Group 4/5 pin functionsGeert Uytterhoeven
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin groups 4 and 5 do not use Module Select Registers to configure pin functions, but use Peripheral Function Select Registers instead. Hence: - Remove the non-existent Module Select Registers (MODSEL[45]), - Add the missing Peripheral Function Select Registers (IPxSR[45]), - Correct the GPIO / Peripheral Function Select Register definitions (GPSR]45_*), - Correct the affected PINMUX definitions. Fixes: 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx") Fixes: 36fb7b8af55b83e0 ("pinctrl: renesas: r8a779g0: Add missing MODSELx for TSN0") Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3d3833d1738f5e8fcc4c1002aa93832464d129a0.1669036423.git.geert+renesas@glider.be
2023-03-06pinctrl: renesas: r8a779g0: Add Audio SSI pins, groups, and functionsLinh Phung
Add pins, groups, and functions for the Serial Sound Interface (SSI) on the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Linh Phung <linh.phung.jy@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87bkmcang2.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06pinctrl: renesas: r8a779g0: Add Audio Clock pins, groups, and functionsLinh Phung
Add pins, groups, and functions for the Audio Clock on the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Linh Phung <linh.phung.jy@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87cz6sanga.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-06pinctrl: renesas: r8a779f0: Fix tsn1_avtp_pps pin groupPhong Hoang
Correct a typo mistake in the definition of the tsn1_avtp_pps pin group mux. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Fixes: babe298e9caaa3d7 ("pinctrl: renesas: r8a779f0: Add Ethernet pins, groups, and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/45ea6e87b91c36fd0b9706cf58ff50a4d1a99c44.1674825039.git.geert+renesas@glider.be
2023-03-06pinctrl: renesas: r8a779a0: Remove incorrect AVB[01] pinmux configurationHai Pham
AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array. The latter are correct, hence remove the former. Without this fix, the Ethernet PHY is not operational on the MDIO bus. Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Fixes: 741a7370fc3b8b54 ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6fd217b71e83ba9a8157513ed671a1fa218b23b6.1674824958.git.geert+renesas@glider.be
2023-01-26pinctrl: renesas: r8a77950: Add VIN[45] pins, groups, and functionsGeert Uytterhoeven
Add pins, groups, and functions for channels 4 and 5 of the Video Input Module (VIN) on the Renesas R-Car H3 ES1.x (R8A77950) SoC, based on the version for the R-Car H3 ES2.0+ (R8A77951) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/92c9b3b535d27ea7fcc0aa73d298783d710c214a.1673425207.git.geert+renesas@glider.be
2023-01-26pinctrl: renesas: rzg2l: Add BUILD_BUG_ON() checksLad Prabhakar
Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each supported SoC. While at it, for readability set n_port_pins based on the GPIO pin configs and not on GPIO names for r9a07g044_data as done for r9a07g043_data. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-01-26pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interruptsLad Prabhakar
On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also the pin configs are completely different. This patch makes sure we use the appropriate pin configs for each SoC (which is passed as part of the OF data) while configuring the GPIO pin as interrupts instead of using rzg2l_gpio_configs[] for all the SoCs. Fixes: bfc69bdbaad1 ("pinctrl: renesas: rzg2l: Add RZ/G2UL support") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-01-26pinctrl: renesas: r8a779g0: Fix alignment in GPSR[678]_* macrosGeert Uytterhoeven
The alignment of the second column in the definitions of the GPSR[678]_* macros does not match the alignment used in other definitions. Fix this to improve uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/9424a0e7f6d66a94d333df9fdc5cdf3b7defb8f5.1669036423.git.geert+renesas@glider.be
2022-11-20Merge tag 'renesas-pinctrl-for-v6.2-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v6.2 - Use dynamic GPIO base on combined pincctrl/gpio controllers on SH/R-Mobile SoCs, - Miscellaneous improvements.
2022-11-17pinctrl: renesas: gpio: Use dynamic GPIO base if no function GPIOsGeert Uytterhoeven
Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static gpiobase allocation") in gpio/for-next, one or more warnings are printed during boot on systems where the pin controller also provides GPIO functionality: gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. Fix this for ARM-based SH/R-Mobile SoCs by: 1. Taking into account a non-zero GPIO base in the various GPIO chip callbacks, 2. Switching to dynamic allocation of the GPIO base when support for legacy function GPIOs is not enabled. On SuperH SoCs using legacy function GPIOs, the GPIO bases of the GPIO controller and the GPIO function controller must not be changed, as all board files rely on the fixed GPIO_* and GPIO_FN_* definitions provided by the various <cpu/sh*.h> header files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/df2cf30ac4c3cbee726799f32b727c1ebe62819c.1668000684.git.geert+renesas@glider.be
2022-11-15pinctrl: renesas: rzg2l: remove unnecessary check from rzg2l_dt_node_to_map()Biju Das
This patch removes the unnecessary check from rzg2l_dt_node_to_map() as the ret value is already negative. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20221108191309.3908415-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-15pinctrl: renesas: rzv2m: remove unnecessary check from rzv2m_dt_node_to_map()Biju Das
This patch removes the unnecessary check from rzv2m_dt_node_to_map() as the ret value is already negative. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20221108183223.3902097-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-24pinctrl: renesas: Add missing header(s)Andy Shevchenko
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-08-10Merge tag 'pinctrl-v6.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...
2022-07-10pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interruptLad Prabhakar
Add IRQ domain to RZ/G2L pinctrl driver to handle GPIO interrupt. GPIO0-GPIO122 pins can be used as IRQ lines but only 32 pins can be used as IRQ lines at a given time. Selection of pins as IRQ lines is handled by IA55 (which is the IRQC block) which sits in between the GPIO and GIC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220707182314.66610-7-prabhakar.mahadev-lad.rj@bp.renesas.com
2022-07-05pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBxKuninori Morimoto
AVB1 needs MODSEL6, AVB2 needs MODSEL5 settings. This patch adds missing MODSELx settings for the affected pins. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k08xsj81.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing MODSELx for TSN0Kuninori Morimoto
TSN0 needs MODSEL4 settings. This patch adds missing MODSELx settings for the affected pins. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87letdsj8e.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing ERROROUTC_AKuninori Morimoto
This patch adds missing ERROROUTC_A settings. Current existing ERROROUTC should be _B, this patch tidies it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mtdtsj8m.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing PWMKuninori Morimoto
R-Car V4H has PWM/PWM_A/PWM_B, but current PFC setting is mixed. This patch adds missing PWM settings, and tidies these up. According to Document, GP3_14 Function4 is PWM2_A, but we can't select it at P1SR3[27:24]. This patch just ignore it for now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o7y9sj90.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing FlexRayKuninori Morimoto
This patch adds missing FlexRay pins. Because Document (Rev.0.51) has 2x FXR_TXENA/B pin with no suffix (_A, _B), this patch names them as _X. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pmipsj9a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing TPU0TOx_AKuninori Morimoto
This patch adds missing TPU0TOx_A. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r135sj9j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing CANFD5_BKuninori Morimoto
This patch adds missing CANFD5_B. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87sfnlsj9t.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing SCIF1_XKuninori Morimoto
This patch adds missing SCIF1_X. Because Document (Rev.0.51) has 2x SCIF1 with no suffix (_A, _B), this patch names it as _X. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tu81sja1.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing SCIF3Kuninori Morimoto
R-Car V4H has SCIF3 and SCIF3_A, but current PFC setting is mixed. This patch cleans up SCIF3/SCIF3_A, based on Rev.0.51. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v8shsja7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing HSCIF1_XKuninori Morimoto
This patch adds missing HSCIF1. Because Document (Rev.0.51) has 2x HSCIF1 with no suffix (_A, _B), this patch names it as _X. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87wncxsjah.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing HSCIF3_AKuninori Morimoto
This patch adds missing HSCIF3_A. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y1xdsjar.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing IRQx_A/IRQx_BKuninori Morimoto
This patch adds missing IRQx_A/IRQx_B, and tidies up existing IRQs. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zghtsjb4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Add missing TCLKx_A/TCLKx_B/TCLKx_XKuninori Morimoto
This patch adds missing TCLKx_A/TCLKx_B/TCLKx_X. Because Document (Rev.0.51) has 2x TCLK3/TCLK4 with no suffix (_A, _B), this patch names them as _X. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871qv5txvt.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Tidyup POC1 voltageKuninori Morimoto
According to Rev.0.51 datasheet 004_R-CarV4H_pin_function.xlsx, GP1_23 - GP1_28 are 1.8/3.3V. But they are not on Table 7.28. According to the HW team, there are no bits assigned. This patch follows HW team's comment. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/8735fltxwg.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Tidy up ioctrl_regsKuninori Morimoto
Remove POC2 which is not documented, and remove TD0SEL3 which is not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874k01txy9.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: r8a779g0: Remove unused MOD_SELx definitionsKuninori Morimoto
Current R-Car V4H PFC code has many MOD_SELx definitions with all 0. But these have no meaning. This patch removes them. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2025-05-03 07:10:35 +0000