summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/samsung
AgeCommit message (Collapse)Author
2019-02-08pinctrl: samsung: Remove legacy API for handling external wakeup interrupts maskKrzysztof Kozlowski
Remove the legacy, ugly API of exposing the static value of external wakeup interrupts mask, because all arch-machine users where converted to use generic implementation from pinctrl driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-14pinctrl: Use of_node_name_eq for node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-14pinctrl: Include <linux/gpio/driver.h> nothing elseLinus Walleij
These drivers are GPIO drivers, and the do not need to use the legacy header in <linux/gpio.h>, go directly for <linux/gpio/driver.h> instead. Replace any use of GPIOF_* with 0/1, these flags are for consumers, not drivers. Get rid of a few gpio_to_irq() users that was littering around the place, use local callbacks or avoid using it at all. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10pinctrl: samsung: Remove duplicated "wakeup" in printkKrzysztof Kozlowski
Double "wakeup" appears in printed message. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-24pinctrl: samsung: Write external wakeup interrupt maskKrzysztof Kozlowski
The pinctrl driver defines an IRQ chip which handles external wakeup interrupts, therefore from logical point of view, it is the owner of external interrupt mask. The register controlling the mask belongs to Power Management Unit address space so it has to be accessed with PMU syscon regmap handle. This mask should be written to hardware during system suspend. Till now ARMv7 machine code was responsible for this which created a dependency between pin controller driver and arch/arm/mach code. Try to rework this dependency so the pinctrl driver will write external wakeup interrupt mask during late suspend. Impact on ARMv7 designs (S5Pv210 and Exynos) ============================================ This duplicates setting mask with existing machine code arch/arm/mach-exynos/suspend.c and arch/arm/mach-s5pv210/pm.c but it is not a problem - the wakeup mask register will be written twice. The machine code will be cleaned up later. The difference between implementation here and ARMv7 machine code (arch/arm/mach-*) is the time of writing the mask: 1. The machine code is writing the mask quite late during system suspend path, after offlining secondary CPUs and just before doing actual suspend. 2. The implementation in pinctrl driver uses late suspend ops, therefore it will write the mask much earlier. Hopefully late enough, after all drivers will enable or disable their interrupt wakeups (enable_irq_wake() etc). Impact on ARMv8 designs (Exynos5433 and Exynos7) ================================================ The Suspend to RAM was not supported and external wakeup interrupt mask was not written to HW. This change brings us one step closer to supporting Suspend to RAM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-07-24pinctrl: samsung: Add dedicated compatible for S5Pv210 wakeup interruptsKrzysztof Kozlowski
The S5Pv210 external wakeup interrupts differ from Exynos therefore separate compatible is needed. Duplicate existing flavor specific data from exynos4210_wkup_irq_chip and add new compatible for S5Pv210. At this point this new compatible does not bring anything new and works exactly as existing "samsung,exynos4210-wakeup-eint". Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-07-24pinctrl: samsung: Document suspend and resume membersKrzysztof Kozlowski
Add missing documentation for suspend and resume members of struct samsung_pin_ctrl and samsung_pinctrl_drv_data. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-07-24pinctrl: samsung: Define suspend and resume callbacks for all banks and SoCsKrzysztof Kozlowski
Suspend and resume callbacks in Exynos/S5Pv210 pin controller drivers, save and restore state of registers. This operations should be done for all banks which have external interrupts (as denoted by using EXYNOS_PIN_BANK_EINTG/EINTW macros). Add all banks of Exynos5260 and Exynos5420. This is necessary step for supporting suspend to RAM on these SoCs. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'pinctrl-v4.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.18. No core changes this time! Just a calm all-over-the-place drivers, updates and fixes cycle as it seems. New drivers/subdrivers: - Actions Semiconductor S900 driver with more Actions variants for S700, S500 in the pipe. Also generic GPIO support on top of the same driver and IRQ support is in the pipe. - Renesas r8a77470 PFC support. - Renesas r8a77990 PFC support. - Allwinner Sunxi H6 R_PIO support. - Rockchip PX30 support. - Meson Meson8m2 support. - Remove support for the ill-fated Samsung Exynos 5440 SoC. Improvements: - Context save/restore support in pinctrl-single. - External interrupt support for the Mediatek MT7622. - Qualcomm ACPI HID QCOM8002 supported. Fixes: - Fix up suspend/resume support for Exynos 5433. - Fix Strago DMI fixes on the Intel Cherryview" * tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: cherryview: limit Strago DMI workarounds to version 1.0 pinctrl: at91-pio4: add missing of_node_put pinctrl: armada-37xx: Fix spurious irq management gpiolib: discourage gpiochip_add_pin[group]_range for DT pinctrls pinctrl: msm: fix gpio-hog related boot issues MAINTAINERS: update entry for Mediatek pin controller pinctrl: mediatek: remove unused fields in struct mtk_eint_hw pinctrl: mediatek: use generic EINT register maps for each SoC pinctrl: mediatek: add EINT support to MT7622 SoC pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit dt-bindings: pinctrl: add external interrupt support to MT7622 pinctrl pinctrl: freescale: Switch to SPDX identifier pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments pinctrl: sh-pfc: r8a77965: Add I2C pin support pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add bias pinconf support pinctrl: sh-pfc: Initial R8A77990 PFC support ...
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24Merge tag 'samsung-pinctrl-4.18-2' of ↵Linus Walleij
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v4.18 1. Driver expects specific order of GPIO interrupt banks. For S5Pv220 and Exynos5410 this order was not preserved so fix and document it. 2. Remove support for Exynos5440 (tree-wide, support is dropped because there are no real users of this platform, it also did not get testing since long time). 3. Fix lost state of GPF1..5 pins on Exynos5433 during system suspend.
2018-05-23pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banksMarek Szyprowski
GPF1..5 banks in Exynos5433 are located in two pinctrl devices: ALIVE and IMEM. Although they are partially located in ALIVE section, the state of their registers in IMEM section is lost after suspend/resume cycle. To properly handle such case, those banks have to be defined with standard 'exynos5433_bank_type_off' type (with PINCFG_TYPE_CON_PDN and PINCFG_TYPE_PUD_PDN register offsets). This automatically instructs the generic Samsung pinctrl suspend/resume code to save and restore state of those registers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-05-02pinctrl: samsung: Remove support for Exynos5440Krzysztof Kozlowski
The Exynos5440 is not actively developed, there are no development boards available and probably there are no real products with it. Remove wide-tree support for Exynos5440. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-05-02pinctrl: samsung: add pin_dbg_show callback for debugfsChanho Park
This patch adds a samsung_pin_dbg_show function to implement the pin_dbg_show callback function which can be used to show pin confuration values. Basically, it can show pin setting values by accessing the "pins" node like below: $ cat pins pin 0 (gpy7-0) CON(0x0) DAT(0x1) PUD(0x1) DRV(0x0) CON_PDN(0x0) PUD_PDN(0x0) Signed-off-by: Chanho Park <parkch98@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-18pinctrl: samsung: Document required order of banksPaweł Chmiel
This patch documents requirement coming from the way exynos_eint_gpio_irq() is working now, which expects EINTG banks to be at the beginning of the bank arrays. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-18pinctrl: samsung: Correct EINTG banks orderPaweł Chmiel
All banks with GPIO interrupts should be at beginning of bank array and without any other types of banks between them. This order is expected by exynos_eint_gpio_irq, when doing interrupt group to bank translation. Otherwise, kernel NULL pointer dereference would happen when trying to handle interrupt, due to wrong bank being looked up. Observed on s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping it to gpi bank. Cc: stable@vger.kernel.org Fixes: 023e06dfa688 ("pinctrl: exynos: add exynos5410 SoC specific data") Fixes: 608a26a7bc04 ("pinctrl: Add s5pv210 support to pinctrl-exynos) Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-03-08pinctrl: samsung: Validate alias coming from DTKrzysztof Kozlowski
Driver uses alias from Device Tree as an index of pin controller data array. In case of a wrong DTB or an out-of-tree DTB, the alias could be outside of this data array leading to out-of-bounds access. Depending on binary and memory layout, this could be handled properly (showing error like "samsung-pinctrl 3860000.pinctrl: driver data not available") or could lead to exceptions. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Fixes: 30574f0db1b1 ("pinctrl: add samsung pinctrl and gpiolib driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: samsung: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL license statements with SPDX GPL-2.0+ license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-10pinctrl: samsung/s3c24xx: add CONFIG_OF dependencyArnd Bergmann
The driver fails to build without CONFIG_OF: drivers/pinctrl/samsung/pinctrl-samsung.c: In function 'samsung_gpiolib_register': drivers/pinctrl/samsung/pinctrl-samsung.c:936:5: error: 'struct gpio_chip' has no member named 'of_node' This configuration is now possible since we can now select the PINCTRL subsystem on S3C24xx machines other than the device tree based ones. Fixes: d219b924611a ("pinctrl: change Kconfig PINCTRL variable to a menuconfig") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-14Merge tag 'samsung-pinctrl-4.14' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl driver changes for v4.14: 1. Fix NULL pointer dereference on S3C24XX. This was reported some time ago and unfortunately it took few releases to fix. 2. Fix invalid register offset used for external interrupts on Exynos5433. This was caused by the same commit as above, although on different path. 3. Consolidate between drivers and bindings the defines for pin mux functions. 4. Minor code improvements.
2017-08-14pinctrl: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee@kernel.org> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@stlinux.com Cc: linux-samsung-soc@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-24pinctrl: samsung: Remove unneeded local variable initializationKrzysztof Kozlowski
Two local variables (shift and reg_con) were initialized to unused values - they were overwritten just few lines after. Getting rid of this unused initialization allows dropping other variables and compacting slightly the code. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-07-19pinctrl: samsung: Consistently use unsigned instead of u32 for nr_banksKrzysztof Kozlowski
Unlike for other countable members, the driver used u32 for number of banks (nr_banks). There is no specific need for using fixed-width integer in this particular place. Make it consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-07-19pinctrl: samsung: Use unsigned int for number of controller IO mem resourcesKrzysztof Kozlowski
Number of IO memory resources cannot be negative obviously and the driver depends silently on this (by iterating from 0 to nr_ext_resources+1). Make this requirement explicit. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-07-18pinctrl: samsung: Use define from dt-bindings for pin mux functionKrzysztof Kozlowski
We already have macros for values used by driver and Device Tree sources for pin mux configuration. Use them instead of duplicating defines. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-07-18pinctrl: samsung: Fix invalid register offset used for Exynos5433 external ↵Krzysztof Kozlowski
interrupts When setting the pin function for external interrupts, the driver used wrong IO memory address base. The pin function register is always under pctl_base, not the eint_base. By updating wrong register, the external interrupts for chosen GPIO would not work at all and some other GPIO might be configured to wrong value. For example on Exynos5433-based boards, the external interrupts for gpf{1-5}-X GPIOs should not work at all (driver toggled reserved registers from ALIVE bank instead). Platforms other than Exynos5433 should not be affected as eint_base equals pctl_base in such case. Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank") Cc: <stable@vger.kernel.org> Reported-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-07-18pinctrl: samsung: Fix NULL pointer exception on external interrupts on S3C24xxKrzysztof Kozlowski
After commit 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank"), the S3C24xx (and probably S3C64xx as well) fails: Unable to handle kernel NULL pointer dereference at virtual address 000000a8 ... (s3c24xx_demux_eint4_7) from [<c004469c>] (__handle_domain_irq+0x6c/0xcc) (__handle_domain_irq) from [<c0009444>] (s3c24xx_handle_irq+0x6c/0x12c) (s3c24xx_handle_irq) from [<c000e5fc>] (__irq_svc+0x5c/0x78) Mentioned commit moved the pointer to controller's base IO memory address from each controller's driver data (samsung_pinctrl_drv_data) to per-bank structure (samsung_pin_bank). The external interrupt demux handlers (s3c24xx_demux_eint()) tried to get this base address from opaque pointer stored under irq_chip data: struct irq_data *irqd = irq_desc_get_irq_data(desc); struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); ... pend = readl(bank->eint_base + EINTPEND_REG); which is wrong because this is hardware irq and it bank was never set for this irq_chip. For S3C24xx and S3C64xx, this partially reverts mentioned commit by bringing back the virt_base stored under each controller's driver data (samsung_pinctrl_drv_data). This virt_base address will be now duplicated: - samsung_pinctrl_drv_data->virt_base: used on S3C24xx and S3C64xx, - samsung_pin_bank->pctl_base: used on Exynos. Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank") Cc: <stable@vger.kernel.org> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reported-by: Sergio Prado <sergio.prado@e-labworks.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Lihua Yao <ylhuajnu@163.com>
2017-06-30pinctrl: samsung: Remove bogus irq_[un]mask from resource managementThomas Gleixner
The irq chip callbacks irq_request/release_resources() have absolutely no business with masking and unmasking the irq. The core code unmasks the interrupt after complete setup and masks it before invoking irq_release_resources(). The unmask is actually harmful as it happens before the interrupt is completely initialized in __setup_irq(). Remove it. Fixes: f6a8249f9e55 ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-07pinctrl: samsung: Explicitly cast pointer returned by of_iomap() to iomemKrzysztof Kozlowski
For S5Pv210 retention control, the driver stores the iomem pointer from of_iomap() under a void pointer member. This makes sparse unhappy: drivers/pinctrl/samsung/pinctrl-exynos.c:664:36: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/samsung/pinctrl-exynos.c:664:36: expected void const volatile [noderef] <asn:2>*addr drivers/pinctrl/samsung/pinctrl-exynos.c:664:36: got void * The iomem pointer is used safely (stored under priv by s5pv210_retention_init(), used by s5pv210_retention_disable()) thus we can add explicit casts to iomem to silence the warning. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07pinctrl: samsung: Handle memory allocation failure during wakeup banks initKrzysztof Kozlowski
Check if kmemdup failed during wakeup banks initialization. Otherwise NULL pointer would be stored under "irq_chip" member of bank and later dereferenced in interrupt handler. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07pinctrl: samsung: Constify wakeup driver specific dataKrzysztof Kozlowski
Static exynos_irq_chip structures, containing driver specific data, are referenced only through opaque data pointer in const of_device_id table. The contents of pointed memory (exynos_irq_chip structure itself) is then copied with kmemdup() during wakeup initialization so exynos_irq_chip can be made const for code safenes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07pinctrl: samsung: Split Exynos drivers per ARMv7 and ARMv8Krzysztof Kozlowski
Exynos pinctrl drivers contain pretty big per-SoC data structures. The pinctrl-exynos object file contained code and data for both ARMv7 and ARMv8 SoCs thus it grew big. There will not be a shared image between ARMv7 and ARMv8 so there is no need to combine all of this into one driver. Splitting the data allows to make it more granular (e.g. code related to ARMv8 Exynos is self-contained), slightly speed up the compilation and reduce the effective size of compiled kernel. The common data structures and functions reside still in existing pinctrl-exynos.c. Only the SoC-specific parts were moved out to new files. Except marking few functions non-static and adding them to header, there were no functional changes in the code. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
2017-05-24pinctrl: samsung: Add include guard to local headerKrzysztof Kozlowski
The pinctrl-exynos.h header is included only once so till now it did not require an include guard. However adding such is harmless and makes code prepared for more inclusions. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
2017-05-23pinctrl: samsung: Clean up modular vs. non-modular distinctionsPaul Gortmaker
Fixups here tend to be more all over the map vs. some of the other repeated/systematic ones we've seen elsewhere. We remove module.h from code that isn't doing anything modular at all; if they have __init sections, then replace it with init.h A couple drivers have module_exit() code that is essentially orphaned, and so we remove that. There are no module_init replacements, so we have no concerns wrt. initcall ordering changes as per some of the other cleanups. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-05-15pinctrl: samsung: Remove unneeded (void *) casts in of_match_tableMasahiro Yamada
of_device_id::data is an opaque pointer. No explicit cast is needed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-05-02Merge tag 'pinctrl-v4.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.12 cycle. The extra week before the merge window actually resulted in some of the type of fixes that usually arrive after the merge window already starting to trickle in from eager developers using -next, I'm impressed. I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal with the onset of Samsung patches. It works great. Apart from that it is a boring round, just incremental updates and fixes all over the place, no serious core changes or anything exciting like that. The most pleasing to see is Julia Cartwrights work to audit the irqchip-providing drivers for realtime locking compliance. It's one of those "I should really get around to looking into that" things that have been on my TODO list since forever. Summary: Core changes: - add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - a whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - switch meson driver to get the GPIO ranges from the device tree. - input schmitt trigger support on the Rockchip driver. - enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - name the Qualcomm QDF2xxx GPIO lines. - support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - pad retention support for the Samsung Exynos 5433. - handle suspend-to-ram in the AT91-pio4 driver. - pin configuration support in the Aspeed driver. Cleanups: - the final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent" * tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: artpec6: Fix return value check in artpec6_pmx_probe() pinctrl: artpec6: Remove .owner field for driver pinctrl: tegra: xusb: Silence sparse warnings ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller" pinctrl: make artpec6 explicitly non-modular pinctrl: aspeed: g5: Add pinconf support pinctrl: aspeed: g4: Add pinconf support pinctrl: aspeed: Add core pinconf support pinctrl: aspeed: Document pinconf in devicetree bindings pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl pinctrl: stm32: Add STM32F469 MCU support Documentation: dt: Remove ngpios from stm32-pinctrl binding pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: add possibility to use gpio-ranges to declare bank range pinctrl: armada-37xx: Add gpio support pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers pinctrl: core: Make pinctrl_init_controller() static pinctrl: generic: Add bi-directional and output-enable ...
2017-04-10Merge tag 'samsung-pinctrl-4.12' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers update for v4.12: 1. Add support for pad retention control through pinctrl drivers which moves us forward to better runtime PM of pinctrl, clocks, power domains and other devices. 2. Fix GPIO hogs by registering pinctrl before registering gpiolib. 3. Use devm-like interface.
2017-04-10pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433Chanwoo Choi
The commit 1259feddd0f8("pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433") already fixed the different width of PINCFG_TYPE_DRV from previous Exynos SoC. However wrong merge conflict resolution was chosen in commit 7f36f5d11cda ("Merge tag 'v4.10-rc6' into devel") effectively dropping the changes for PINCFG_TYPE_DRV. Re-do them here. The macro EXYNOS_PIN_BANK_EINTW is no longer used so remove it. Fixes: 7f36f5d11cda ("Merge tag 'v4.10-rc6' into devel") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23pinctrl: samsung: Use devres version of gpiochip_add_dataCharles Keepax
Use devm_gpiochip_add_data to simplify the error path in samsung_gpiolib_register. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-23pinctrl: samsung: Register pinctrl before GPIOCharles Keepax
If we request a GPIO hog, then gpiochip_add_data will attempt to request some of its own GPIOs. The driver also uses gpiochip_generic_request which means that for any GPIO request to succeed the pinctrl needs to be registered. Currently however the driver registers the GPIO and then the pinctrl meaning all GPIO hog requests will fail, which then in turn causes the whole driver to fail probe. Fix this up by ensuring we register the pinctrl first. This does require us to manually set the GPIO base for the pinctrl. Fortunately the driver already assigns a fixed GPIO base, in samsung_gpiolib_register, and uses the same calculation it does for the pin_base. Meaning the two will always be the same and allowing us to reuse the pinbase and avoid the issue. Although currently there are no users of GPIO hogs in mainline there are plenty of Samsung based boards that are widely used for development purposes of other hardware. Indeed we hit this issue whilst attaching some additional hardware to an Arndale system. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-23pinctrl: samsung: Add support for pad retention control for Exynos5433 SoCsMarek Szyprowski
This patch adds support for retention control for Exynos5433 SoCs. Three groups of pins has been defined for retention control: common shared group for ALIVE, CPIF, eSE, FINGER, IMEM, NFC, PERIC, TOUCH pin banks and separate control for FSYS and AUD pin banks, for which PMU retention registers match whole banks. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-23pinctrl: samsung: Ensure that pad retention is disabled on driver initMarek Szyprowski
When pin controller device is a part of power domain, there is no guarantee that the power domain was not turned off and then on during boot process before probing of the pin control driver. If it happened, then pin control driver should ensure that pad retention is turned off during its probe call. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-23pinctrl: samsung: Fix memory mapping codeAndrzej Hajda
Some pinctrls share memory regions, and devm_ioremap_resource does not allow to share resources, in opposition to devm_ioremap. This patch restores back usage of devm_ioremap function, but with proper error handling and logging. Fixes: baafaca ("pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()") Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14pinctrl: samsung: Remove unused local variableCharles Keepax
The local variable drvdata is not used in samsung_gpio_set_direction. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()Wei Yongjun
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). Fix by using devm_ioremap_resource instead of devm_ioremap. Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: samsung: mark PM functions as __maybe_unusedArnd Bergmann
The rework of the suspend/resume handling uses the wrong #ifdef check, leading to a build warning without CONFIG_PM_SLEEP: drivers/pinctrl/samsung/pinctrl-samsung.c:1142:12: error: 'samsung_pinctrl_resume' defined but not used [-Werror=unused-function] drivers/pinctrl/samsung/pinctrl-samsung.c:1092:12: error: 'samsung_pinctrl_suspend' defined but not used [-Werror=unused-function] Using a __maybe_unused annotation instead of the #ifdef is a simple way to avoid this problem class. Fixes: 2b24efa8e5c5 ("pinctrl: samsung: Replace syscore ops with standard platform device pm_ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30Merge tag 'v4.10-rc6' into develLinus Walleij
Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c