summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/sh-pfc
AgeCommit message (Collapse)Author
2019-02-11pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functionsTakeshi Kihara
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77965 SoC. Based on a similar patch of the R8A7796 PFC driver by Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functionsTakeshi Kihara
This patch adds TMU TCLK{1,2} pins, groups and functions to the R8A77965 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11pinctrl: sh-pfc: Validate fixed-size field widths at build timeGeert Uytterhoeven
Add a build-time check, to ensure the register and field widths in descriptors for config registers with fixed-width fields are sane. This helps catching bugs early. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groupsGeert Uytterhoeven
There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin groupGeert Uytterhoeven
The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected. Fixes: 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin groupGeert Uytterhoeven
The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: emev2: Add missing pinmux functionsGeert Uytterhoeven
The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-05pinctrl: sh-pfc: r8a77990: Add DRIF pins, groups and functionsTakeshi Kihara
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21pinctrl: sh-pfc: r8a7778: Fix HSPI pin numbers and namesGeert Uytterhoeven
When declaring the HSPI RX1_B and TX1_B pins, two mistakes were made: - the rows and columns in the BGA pin matrix, from which the pin numbers are derived, were exchanged, - it was not taken into account that pin row labelling skips characters I, O, Q, and S. Fix the order, and the corresponding pin names. Notes: - The actual values of the pin numbers don't really matter (they just have to be unique), so the wrong order didn't have any impact, - Changing the names of the pins is user-visible, but there are no users in (upstream) DTS files. Fixes: 4f82e3ee724f1712 ("sh-pfc: Support pins not associated with a GPIO port") Fixes: 09cc76a95802e87d ("sh-pfc: r8a7778: add HSPI pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a77990: Add TMU pins, groups and functionsTakeshi Kihara
This patch adds TMU TCLK{1,2} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3Geert Uytterhoeven
Unlike R-Car M3-W, R-Car M3-N does not have DU_DOTCLKIN2, but the corresponding pin carries the DU_DOTCLKIN3 signal. Correct all references to DU_DOTCLKIN2 to fix this. This change does not have any runtime effect, as it only changes an internal enum name, and a comment. Fixes: 490e687eb8b274b5 ("pinctrl: sh-pfc: Initial R-Car M3-N support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a7791: Fix VIN1 versioned groupsGeert Uytterhoeven
The naming of the "b" versions of the VIN1 pin groups is a bit odd, in that the "_b" appears in the middle of the names, instead of as a suffix. Increase consistency with other SoCs by making R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N, use the recently added optional "version" argument of the VIN_DATA_PIN_GROUP() macro. Note that this breaks backwards compatibility with existing DTBs, but there are no upstream users of the "vin1_b_*" names. Fixes: 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a77980: Deduplicate VIN1 pin definitionsGeert Uytterhoeven
Use union vin_data12 and VIN_DATA_PIN_GROUP() to reduce redundancies in pin definitions for the VIN1 channel. This reduces kernel size by 144 bytes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-01-21pinctrl: sh-pfc: r8a77970: Deduplicate VIN[01] pin definitionsGeert Uytterhoeven
Use union vin_data12 and VIN_DATA_PIN_GROUP() to reduce redundancies in pin definitions for the VIN0 and VIN1 channels. This reduces kernel size by 288 bytes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-01-21pinctrl: sh-pfc: r8a7796: Deduplicate VIN5 pin definitionsGeert Uytterhoeven
Use union vin_data16 and VIN_DATA_PIN_GROUP() to reduce redundancies in pin definitions for the VIN5 channel. This reduces kernel size by 240 bytes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-01-21pinctrl: sh-pfc: r8a7795: Deduplicate VIN5 pin definitionsGeert Uytterhoeven
Use union vin_data16 and VIN_DATA_PIN_GROUP() to reduce redundancies in pin definitions for the VIN5 channel. This reduces kernel size by 240 bytes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-01-21pinctrl: sh-pfc: r8a7794: Initialize TDSEL register for ES1.0Wolfram Sang
Documentation for ES1.0 says that some bits in TDSEL must be set (ch 5.3.35 in R-Car E2 v0.5). However, the reset value of the register is 0, so software has to do it. Add this to the kernel driver to ensure this is really done independent of firmware versions and use whitelisting for ES versions known to need this. This is needed for some SD cards supporting SDR104 transfer mode. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21pinctrl: sh-pfc: r8a7790: Initialize TDSEL register for ES1.0Wolfram Sang
Documentation for ES1.0 says that some bits in TDSEL must be set (ch 5.3.39 in R-Car H2 v0.91). However, the reset value of the register is 0, so software has to do it. Add this to the kernel driver to ensure this is really done independent of firmware versions and use whitelisting for ES versions known to need this. This is needed for some SD cards supporting SDR104 transfer mode. For me, TDSEL was not initialized by the firmware and I had problems with the card when re-inserting it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21pinctrl: sh-pfc: Print pin group when debuggingGeert Uytterhoeven
Knowing which pin group is being configured is useful information when debugging pin configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21Revert "pinctrl: sh-pfc: r8a77990: Add support for pull-up only pins"Geert Uytterhoeven
This reverts commit f4caa6ee736fa8a46c806ba4382c16f7e5a20248. The same can be expressed better by dropping the SH_PFC_PIN_CFG_PULL_DOWN flag from the GPIO description, as it includes returning an error to the caller when trying to configure the pin for pull-down, causing: sh-pfc e6060000.pin-controller: pin_config_set op failed for pin 201 sh-pfc e6060000.pin-controller: Error applying setting, reverse things back sh-pfc e6060000.pin-controller: failed to select default state Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a77990: GP6_9 does not have pull-down capabilityGeert Uytterhoeven
Hence remove the SH_PFC_PIN_CFG_PULL_DOWN flag from the GP6_9 GPIO description. Fixes: 83f6941a42a5e773 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a77995: Fix MOD_SEL bit numberingTakeshi Kihara
MOD_SEL register bit numbering was different from R-Car D3 SoC and R-Car H3/M3-[WN] SoCs. MOD_SEL 1-bit H3/M3-[WN] D3 =============== ========== ===== Set Value = H'0 b'0 b'0 Set Value = H'1 b'1 b'1 MOD_SEL 2-bits H3/M3-[WN] D3 =============== ========== ===== Set Value = H'0 b'00 b'00 Set Value = H'1 b'01 b'10 Set Value = H'2 b'10 b'01 Set Value = H'3 b'11 b'11 MOD_SEL 3-bits H3/M3-[WN] D3 =============== ========== ===== Set Value = H'0 b'000 b'000 Set Value = H'1 b'001 b'100 Set Value = H'2 b'010 b'010 Set Value = H'3 b'011 b'110 Set Value = H'4 b'100 b'001 Set Value = H'5 b'101 b'101 Set Value = H'6 b'110 b'011 Set Value = H'7 b'111 b'111 This patch replaces the #define name and value of MOD_SEL. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 794a67117646 ("pinctrl: sh-pfc: Initial R8A77995 PFC support") [shimoda: split a patch per SoC and revise the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [geert: Use a macro to do the actual reordering] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a77990: Fix MOD_SEL bit numberingTakeshi Kihara
MOD_SEL register bit numbering was different from R-Car E3 SoC and R-Car H3/M3-[WN] SoCs. MOD_SEL 1-bit H3/M3-[WN] E3 =============== ========== ===== Set Value = H'0 b'0 b'0 Set Value = H'1 b'1 b'1 MOD_SEL 2-bits H3/M3-[WN] E3 =============== ========== ===== Set Value = H'0 b'00 b'00 Set Value = H'1 b'01 b'10 Set Value = H'2 b'10 b'01 Set Value = H'3 b'11 b'11 MOD_SEL 3-bits H3/M3-[WN] E3 =============== ========== ===== Set Value = H'0 b'000 b'000 Set Value = H'1 b'001 b'100 Set Value = H'2 b'010 b'010 Set Value = H'3 b'011 b'110 Set Value = H'4 b'100 b'001 Set Value = H'5 b'101 b'101 Set Value = H'6 b'110 b'011 Set Value = H'7 b'111 b'111 This patch replaces the #define name and value of MOD_SEL. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 6d4036a1e3b3 ("pinctrl: sh-pfc: Initial R8A77990 PFC support") [shimoda: Split a patch per SoC and revise the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [geert: Use macros to do the actual reordering] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2019-01-21pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit2 when using RX2, TX2 and SCK2Takeshi Kihara
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug 24, 2018, the MOD_SEL0 bit2 is set when RX2_{A,B}, TX2_{A,B} and SCK2_A pin functions are selected. Fixes: 6d4036a1e3b3ac0f ("pinctrl: sh-pfc: Initial R8A77990 PFC support") Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0Takeshi Kihara
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug 24, 2018, the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is selected, and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is selected. Fixes: 6d4036a1e3b3ac0f ("pinctrl: sh-pfc: Initial R8A77990 PFC support") Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-lengthGeert Uytterhoeven
pinmux_cfg_reg.var_field_width[] is actually a variable-length array, terminated by a zero, and counting at most r_width entries. Usually the number of entries is much smaller than r_width, so the ability to catch bugs at compile time through an "excess elements in array initializer" warning is fairly limited. Hence make the array variable-length, decreasing kernel size slightly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: Print actual field width for variable-width fieldsGeert Uytterhoeven
The debug code in sh_pfc_write_config_reg() prints the width of the field being modified. However, registers with a variable-width field layout are identified by pinmux_cfg_reg.field_width being zero, hence zeroes are printed instead of the actual field widths. Fix this by printing the Hamming weight of the field mask instead, which is correct for both fixed-width and variable-width fields. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10Geert Uytterhoeven
Some values in the Peripheral Function Select Register 10 descriptor are shifted by one position, which may cause a peripheral function to be programmed incorrectly. Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was already the case for the HSCK0 pin in field IP10[5:3]. Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 valueGeert Uytterhoeven
The IP10[5:3] field in Peripheral Function Select Register 10 has a width of 3 bits, i.e. it allows programming one out of 8 different configurations. However, 9 values are provided instead of 8, overflowing into the subsequent field in the register, and thus breaking the configuration of the latter. Fix this by dropping a bogus zero value. Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: sh7269: Add missing PCIOR0 fieldGeert Uytterhoeven
The Port C I/O Register 0 contains 7 reserved bits, but the descriptor contains only dummy configuration values for 6 reserved bits, thus breaking the configuration of all subsequent fields in the register. Fix this by adding the two missing configuration values. Fixes: f5e811f2a43117b2 ("sh-pfc: Add sh7269 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configurationGeert Uytterhoeven
The Port F Control Register 3 (PFCR3) contains only a single field. However, counting from left to right, it is the fourth field, not the first field. Insert the missing dummy configuration values (3 fields of 16 values) to fix this. The descriptor for the Port F Control Register 0 (PFCR0) lacks the description for the 4th field (PF0 Mode, PF0MD[2:0]). Add the missing configuration values to fix this. Fixes: a8d42fc4217b1ea1 ("sh-pfc: Add sh7264 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a77995: Remove bogus SEL_PWM[0-3]_3 configurationsGeert Uytterhoeven
While the SEL_PWM[0-3] fields in the Module Select Register 0 support 4 possible configurations per PWM pin, only the first 3 are valid. Replace the invalid and unused configurations for SEL_PWM[0-3]_3 by dummies. Fixes: 794a6711764658a1 ("pinctrl: sh-pfc: Initial R8A77995 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 SEL_I2C1 field widthGeert Uytterhoeven
The SEL_I2C1 (MOD_SEL0[21:20]) field in Module Select Register 0 has a width of 2 bits, i.e. it allows programming one out of 4 different configurations. However, the MOD_SEL0_21_20 macro contains 8 values instead of 4, overflowing into the subsequent fields in the register, and thus breaking the configuration of the latter. Fix this by dropping the bogus last 4 values, including the non-existent SEL_I2C1_4 configuration. Fixes: 6d4036a1e3b3ac0f ("pinctrl: sh-pfc: Initial R8A77990 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: sh7734: Add missing IPSR11 fieldGeert Uytterhoeven
The Peripheral Function Select Register 11 contains 3 reserved bits and 15 variable-width fields, but the variable field descriptor does not contain the 3-bit field IP11[25:23]. Fixes: 856cb4bb337ee504 ("sh: Add support pinmux for SH7734") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a77980: Add missing MOD_SEL0 fieldGeert Uytterhoeven
The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12 single-bit fields, but the variable field descriptor lacks a field of 4 reserved bits. Fixes: f59125248a691dfe ("pinctrl: sh-pfc: Add R8A77980 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a77970: Add missing MOD_SEL0 fieldGeert Uytterhoeven
The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12 single-bit fields, but the variable field descriptor lacks a field of 4 reserved bits. Fixes: b92ac66a1819602b ("pinctrl: sh-pfc: Add R8A77970 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 fieldGeert Uytterhoeven
The Peripheral Function Select Register 9 contains 12 fields, but the variable field descriptor contains a 13th bogus field of 3 bits. Fixes: 43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: Validate pins/marks in pin groups at build timeGeert Uytterhoeven
Add a build-time check, to ensure the number of pins and pin marks in a pin group matches. This helps catching bugs early. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 groupGeert Uytterhoeven
The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the tpu4_to3_pins[] array lacks the corresponding pin number. Add the missing pin number, for non-GPIO pin F26. Fixes: 5da4eb049de803c7 ("sh-pfc: sh73a0: Add TPU pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 groupGeert Uytterhoeven
The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of the color components. The vin1_b_data18_pins[] array rightfully does not include the corresponding pin numbers, as RGB18 is subset of RGB24, containing only the 6 MSB bits of each component. Fixes: 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b groupGeert Uytterhoeven
The qspi_data4_b_mux[] array contains pin marks for the clock and chip select pins. The qspi_data4_b_pins[] array rightfully does not contain the corresponding pin numbers, as the control pins are provided by a separate group (qspi_ctrl_b). Fixes: 2d0c386f135e4186 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 groupGeert Uytterhoeven
The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers, but the lcd0_data24_1_mux[] array lacks the corresponding pin marks. Fixes: 06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii groupGeert Uytterhoeven
The gether_gmii_mux[] array contains the REF125CK pin mark, but the gether_gmii_pins[] array lacks the corresponding pin number. Fixes: bae11d30d0cafdc5 ("sh-pfc: r8a7740: Add GETHER pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a77990: Fix IOCTRL reg state after s2ram on R-Car E3Geert Uytterhoeven
Due to an interaction with commit 9f2b76a2db3c4387 ("pinctrl: sh-pfc: r8a77990: Add R8A774C0 PFC support"), the state of the I/O Control Registers is saved/restored during s2ram on RZ/G2E, but not on R-Car E3. Hence on R-Car E3, SDHI voltage state is lost after system resume. Fix this by registering the I/O Control Registers on R-Car E3, too. Fixes: 33847a71373cd6ae ("pinctrl: sh-pfc: r8a77990: Add voltage switch operations for SDHI") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18pinctrl: sh-pfc: r8a77990: Add support for pull-up only pinsGeert Uytterhoeven
The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Jul 2, 2018) states that the USB30_OVC pin supports pull-up only. It has a bit assigned in the pull-enable register (PUEN5), but not in the pull-up/down control register (PUD5). Add a check for this, to prevent configuring a prohibited setting. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 83f6941a42a5e773 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-20pinctrl: sh-pfc: r8a77980: Add QSPI pins, groups, and functionsDmitry Shifrin
Add the QSPI{0|1} pins/groups/functions to the R8A77980 PFC driver. [Sergei: ported to the upstream driver, fixed up the swapped QSPI0 SPCLK/ SSL pins, fixed up the comments, moved the QSPI pins/groups/functions to be in the alphanumeric order, removed unneeded empty lines, renamed the patch.] Signed-off-by: Dmitry Shifrin <dmitry.shifrin@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-19pinctrl: sh-pfc: r8a77990: Add CAN FD pins, groups and functionsTakeshi Kihara
This patch adds CAN FD{0,1} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> [geert: Move canfd from common to automotive] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-19pinctrl: sh-pfc: r8a77990: Add CAN pins, groups and functionsTakeshi Kihara
This patch adds CAN{0,1} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-19pinctrl: sh-pfc: r8a77965: Add CAN FD pins, groups and functionsTakeshi Kihara
This patch adds CAN FD{0,1} pins, groups and functions to the R8A77965 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-11-19pinctrl: sh-pfc: r8a77965: Add CAN pins, groups and functionsTakeshi Kihara
This patch adds CAN{0,1} pins, groups and functions to the R8A77965 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2024-05-31 00:41:45 +0000