summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/tegra
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-14pinctrl: tegra: explicitly request exclusive reset controlPhilipp Zabel
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-gpio@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: tegra: clean up modular vs. non-modular distinctionsPaul Gortmaker
None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the drivers there is no doubt they are builtin-only. All drivers get similar changes, so they are handled in batch. We remove module.h from code that isn't doing anything modular at all; if they have __init sections, then replace it with init.h. A couple drivers have module_exit() code that is essentially orphaned, and so we remove that. Quite a few bool drivers (hence non-modular) are converted over to to builtin_platform_driver(). Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Pritesh Raithatha <praithatha@nvidia.com> Cc: Ashwini Ghuge <aghuge@nvidia.com> Cc: linux-gpio@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: tegra: xusb: Silence sparse warningsThierry Reding
Commit 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") added a new driver for the XUSB pad controller that implements a more flexible devicetree binding. In order to preserve backwards compatibility the old driver can be probed if the obsolete bindings are detected. In order to hide the legacy code, these prototypes were defined in a header private to the new driver. This has the disadvantage of making the sparse code checker complain about the missing declarations when compiling the old driver and suggesting to make the functions static. Avoid these sparse warnings by adding local prototype declarations into the compatibility driver. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-28Merge tag 'pinctrl-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ...
2016-06-22pinctrl: tegra: Fix build dependencyAxel Lin
I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30pinctrl: tegra: Get rid of parked_regLaxman Dewangan
Remove the use of parked_reg and use parked_bit for to know whether field is supported or not. This is fix for the patch commit 1d18a3f0f0809f6c71f1f6e9e268ee904ce0b588 "pinctrl: tegra: avoid parked_reg and parked_bank Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30Revert "Revert "pinctrl: tegra: avoid parked_reg and parked_bank""Linus Walleij
This reverts commit 0d5358330c20d50e52e3e65ff07a5db8007041fc.
2016-05-19Merge tag 'pinctrl-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
2016-05-13Revert "pinctrl: tegra: avoid parked_reg and parked_bank"Linus Walleij
This reverts commit 1d18a3f0f0809f6c71f1f6e9e268ee904ce0b588.
2016-05-11pinctrl: tegra: avoid parked_reg and parked_bankLaxman Dewangan
NVIDIA's Tegra210 support the park bit to make pinmux configuration enable/disable. If parked bit is 1 then configuration does not apply and if it is 0 then pinmux configuration applies. This is to support to avoid any glitch in pinmux configurations. The parked bit is part of mux register and mux bank and hence it is not required to have member for the parked_reg and parked bank very similar to other bit field of the same register. Remove the need of the parked register and parked bank and get whether parked function supported or not by parked_bit. This is to make the parked bit handling same as other fields of mux registers. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11pinctrl: tegra: Correctly check the supported configurationLaxman Dewangan
The pincontrol registers of Tegra chips has multiple filed per registers. There is two type of registers mux and drive. All configurations belongs to one of these registers. If any configurations are supported then <config>_bit is set to bit position of these registers otherwise -1 to not support it. The member is defined as s32 <config>_bit:6; So if config is not supported ifor given SoC then it is set to -1 in soc pinmmux table. In common driver code, to find out that given config is supported or not, it is checked as: s8 bit = <config>_bit; if (bit > 31) { /* Not supported config */ } But in this case, bit is s8 and hence for non supporting it is -1. Correct the check as: if (bit < 0) { /* Not supported config */ } Fixes: e4c02dced975cb ("pinctrl: tegra: use signed bitfields for optional fields") Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-29phy: Add Tegra XUSB pad controller supportThierry Reding
Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs. This hardware block used to be exposed as a pin controller, but it turns out that this isn't a good fit. The new driver and DT binding much more accurately describe the hardware and are more flexible in supporting new SoC generations. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-21pinctrl: tegra-xusb: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan
Use devm_pinctrl_register() for pin control registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Jon Hunter <jonathanh@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: tegra: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan
Use devm_pinctrl_register() for pin control registration and remove need of .remove callback. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-14pinctrl: tegra: clear park bit for all pinsRhyland Klein
Parking bits might not be cleared by the bootloader properly (if for instance it doesn't use the device configured by that pin). Clear the park bits for all the pins during pinctrl probe. This is present on T210 platforms but not earlier ones, so for earlier generations, set parked_reg = -1 to disable. The park bit is used to prevent glitching when reprogramming pinctrl registers. Based on work by: Shravani Dingari <shravanid@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-01pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_mapIrina Tirdea
Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map, since it does not depend on device tree despite the current name. This will enforce a consistent naming in pinctr-utils.c and will make it clear it can be called from outside device tree (e.g. from ACPI handling code). Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05pinctrl: tegra: move Tegra pinctrl drivers to sub-directoryMasahiro Yamada
Tegra has several pinctrl drivers. Now it is reasonable enough to move them into drivers/pinctrl/tegra/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>