| Age | Commit message (Collapse) | Author |
|---|
|
commit b0c07116c894 ("platform/x86: amd-pmc: Avoid reading SMU version at
probe time") adjusted the behavior for amd-pmc to avoid reading the SMU
version at startup but rather on first use to improve boot time.
However the SMU version is also used to decide whether to place a timer
based wakeup in the OS_HINT message. If the idlemask hasn't been read
before this message was sent then the SMU version will not have been
cached.
Ensure the SMU version has been read before deciding whether or not to
run this codepath.
Cc: stable@vger.kernel.org # 6.0
Reported-by: You-Sheng Yang <vicamo.yang@canonical.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Fixes: b0c07116c894 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221020113749.6621-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use the `PLATFORM_DEVID_NONE` constant instead of
hard-coding -1 when creating a platform device.
No functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The idle mask is dumped during the "prepare" and "restore" stage
right now, which helps to demonstrate issues only related to the
first s2idle entry.
If the system has entered s2idle once, but was woken up never
breaking the s2idle loop but also never went back to sleep we
might still have another issue to deal with however.
Move the dynamic debugging message here so that we'll catch it on
each iteration.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216516
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220929215042.745-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since linux/debugfs.h already has the stubs for the used debugfs
functions when debugfs is not enabled, remove the #ifdef CONFIG_DEBUG_FS
checks.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922175608.630046-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
|
|
Initial version of the PMF ACPI documentation had the concept
of "power_delta" which is removed in the recent revisions.
So the entire cnqf_power_delta structure is never used/updated.
Hence removing it.
Fixes: 1738061c9ec8 ("platform/x86/amd/pmf: Add support for CnQF")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922165118.163165-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It is observed that when thinkpad_acpi driver loads before amd-pmf
driver, thinkpad_acpi driver sends the AMT "on" event and the request
immediately will be part of the PMF BIOS "pending requests".
With the current amd-pmf code, as soon as the amd-pmf driver gets
probed, it calls apmf_acpi_init() where the notify handler will be
installed. Handler callback would call amd_pmf_handle_amt() where the
amd_pmf_set_automode() shall update the auto-mode thermals.
In this case, the auto-mode config_store shall have "zeros", as the
auto mode init gets called during the later stage.
To fix this, change the order of the acpi notifer install and call it
after the auto mode initialization is done.
Fixes: 7d77dcc83ada ("platform/x86/amd/pmf: Handle AMT and CQL events for Auto mode")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220923131724.1812685-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Whether to turn CnQF on/off by default upon driver load would be decided
by a BIOS flag. Add a sysfs node to provide a way to the user whether to
use static slider or CnQF .
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922131202.56529-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
CnQF (a.k.a Cool and Quiet Framework) extends the static slider concept.
PMF dynamically manages system power limits and fan policy based on system
power trends which is representative of workload trend.
Static slider and CnQF controls are mutually exclusive for system power
budget adjustments. CnQF supports configurable number of modes which can
be unique for AC and DC. Every mode is representative of a system state
characterized by unique steady state and boost behavior.
OEMs can configure the different modes/system states and how the
transition to a mode happens. Whether to have CnQF manage system power
budget dynamically in AC or DC or both is also configurable. Mode changes
due to CnQF don't result in slider position change.
The default OEM values are obtained after evaluating the PMF ACPI function
idx 11 & 12 for AC and DC respectively. Whether to turn ON/OFF by default
is guided by a "flag" passed by the OEM BIOS.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922131202.56529-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Without CONFIG_DEBUG_FS, the following build error occurs:
drivers/platform/x86/amd/pmc.c:984:17: error: use of undeclared identifier 'pmc_groups'; did you mean 'set_groups'?
.dev_groups = pmc_groups,
^~~~~~~~~~
set_groups
./include/linux/cred.h:65:13: note: 'set_groups' declared here
extern void set_groups(struct cred *, struct group_info *);
^
drivers/platform/x86/amd/pmc.c:984:17: error: incompatible pointer types initializing 'const struct attribute_group **' with an expression of type 'void (struct cred *, struct group_info *)' [-Werror,-Wincompatible-pointer-types]
.dev_groups = pmc_groups,
^~~~~~~~~~
2 errors generated.
pmc_groups was only defined inside a CONFIG_DEBUG_FS block but
commit 7f1ea75d499a ("platform/x86/amd: pmc: Add sysfs files for SMU")
intended for these sysfs files to be available outside of debugfs.
Shuffle the necessary functions out of the CONFIG_DEBUG_FS block so that
the file always builds.
Fixes: 7f1ea75d499a ("platform/x86/amd: pmc: Add sysfs files for SMU")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220922153100.324922-1-nathan@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The CPU/APU SMU FW version and program is currently discoverable by
turning on dynamic debugging or examining debugfs for the amdgpu
driver. To make this more discoverable, create a dedicated sysfs
file for it that userspace can parse without debugging enabled.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220914141850.259-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The `check` callback is run right before the cores are put into HLT.
This will allow checking synchronization problems with other software
that writes into the STB.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829162953.5947-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The kernel parameter `enable_stb` currently gates the access to the STB
from debugfs and also controls whether the kernel writes events to the
STB.
Even if not accessing STB data from the kernel it's useful to have this
data stored to review the STB. So in suspend/resume always write it.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829162953.5947-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently `amd-pmc` has two events, but just adds one to the first to
distinguish the second. Add a clear definition what these events mean.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829162953.5947-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
variable 'mode' is used uninitialized whenever switch default is taken
in sps.c which leads to the following clang warning.
drivers/platform/x86/amd/pmf/sps.c:96:2: error: variable 'mode' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/platform/x86/amd/pmf/sps.c:101:9: note: uninitialized use occurs here
return mode;
^~~~
drivers/platform/x86/amd/pmf/sps.c:84:9: note: initialize the variable 'mode' to silence this warning
u8 mode;
^
= '\0'
1 error generated.
Fix it by returning -EOPNOTSUPP in default case and also change the return
type of the function amd_pmf_get_pprof_modes() to keep it similar like
other drivers which implement platform_profile.
Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220822062917.4061503-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Its reported that amd-pmf driver when built with config which does not
have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to
symbols used.
ld: vmlinux.o: in function `amd_pmf_init_sps':
drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register'
ld: vmlinux.o: in function `amd_pmf_deinit_sps':
drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove'
Fix it by adding a "select" to the Kconfig.
Fixes: da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819083858.3987590-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some of the older platforms with _HID "AMDI0100" PMF driver can be force
loaded by interested users but only for experimental purposes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The transition to auto-mode happens when the PMF driver receives
AMT (Auto Mode transition) event. transition logic will reside in the
PMF driver but the events would come from other supported drivers[1].
The thermal parameters would vary between when a performance "on-lap" mode
is detected and versus when not. The CQL event would get triggered from
other drivers, so that PMF driver would adjust the system thermal config
based on the ACPI inputs.
OEMs can control whether or not to enable AMT or CQL via other supported
drivers[1] but the actual transition logic resides in the AMD PMF driver.
When an AMT event is received the automatic mode transition RAPL algorithm
will run. When a CQL event is received an performance "on-lap" mode will
be enabled and thermal parameters will be adjusted accordingly.
[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This feature has 3 modes quiet, balanced, performance
The objective of this feature is to track the moving average of system
power over the time period specified and switch to the subsequent mode.
In order to do this, PMF driver will get the moving average of APU power
from PMFW and power threshold, time constants, system config parameters
from OEM inputs.
System power as read by PMF driver from PMFW is the filtered value over
the sampling window. Every sampling window, moving average of system power
is computed. At the end of the monitoring window, the moving average is
compared against the threshold for mode switch for decision making.
With AMD managing the system config limits, any mode switch within
auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled
down.
When "auto mode" is enabled, the static slider control remains out of
the PMF driver, so the platform_profile registration would not
happen in PMF driver.
The transition to auto-mode only happens when the APMF fn5 is enabled
in BIOS, platform_profile set to "balanced" and a AMT
(Auto Mode transition) is received.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver polls for metrics information from PMFW to understand the system
behavior, power consumption etc.
This metrics table information will be used the PMF features to tweak the
thermal heuristics. The poll duration can also be changed by the user
by changing the poll duration time.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF has a generic interface defined via PMF ACPI fn9 for influencing fan
policy during mode switch.
PMF ACPI fn9 will normally be invoked when AMDPMF needs to change the fan
table index for the EC. When AMDPMF is loaded this function will be invoked
to change fan speed. OEM can also choose to report the actual fan table
index and fan RPM to PMF through OEM structure.
This information will be communicated by PMF driver to customer BIOS.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver can send periodic heartbeat signals to OEM BIOS. When BIOS does
not receive the signal after a period of time, it can infer that AMDPMF
has hung or failed to load.
In this situation, BIOS can fallback to legacy operations. OEM can modify
the time interval of the signal or completely disable signals through
ACPI Method.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add debugfs support to the PMF driver so that using this interface the
live counters from the PMFW can be queried to see if the power parameters
are getting set properly when a certain power mode change happens.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SPS (a.k.a. Static Power Slider) gives a feel of Windows performance
power slider for the Linux users, where the user selects a certain
mode (like "balanced", "low-power" or "performance") and the thermals
associated with each selected mode gets applied from the silicon
side via the mailboxes defined through PMFW.
PMF driver hooks to platform_profile by reading the PMF ACPI fn9 to
see if the support is being advertised by ACPI interface.
If supported, the PMF driver reacts to platform_profile selection choices
made by the user and adjust the system thermal behavior.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver implements the ACPI methods as defined by AMD for PMF Support.
The ACPI layer acts as a glue that helps in providing the infrastructure
for OEMs customization.
OEMs can refer to PMF support documentation to decide on the list of
functions to be supported on their specific platform model.
AMD mandates that PMF ACPI fn0 and fn1 to be implemented which
provides the set of functions, params and the notifications that
would be sent to PMF driver so that PMF driver can adapt and
react.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF core layer is meant to abstract the common functionalities
across PMF features. This layer also does the plumbing work
like setting up the mailbox channel for the communication
between the PMF driver and the PMFW (Power Management Firmware)
running on the SMU.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMC driver can be supported on a new upcoming platform.
Add this information to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
New version of PMC controller will have a separate ACPI id, add that
to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently, AMD supported platform drivers are grouped under generic "x86"
folder structure. Move the current drivers (amd-pmc and amd_hsmp) to a
separate directory. This would also mean the newer driver submissions to
pdx86 subsystem in the future will also land in AMD specific directory.
Reviewed-by: Naveen Krishna Chatradhi <NaveenKrishna.Chatradhi@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220608193212.2827257-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
