summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
2019-04-13Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Here's more than a handful of clk driver fixes for changes that came in during the merge window: - Fix the AT91 sama5d2 programmable clk prescaler formula - A bunch of Amlogic meson clk driver fixes for the VPU clks - A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc clks as critical only when really needed - Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate implementation - Use the right structure to test for a frequency table in i.MX's PLL_1416x driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx: Fix PLL_1416X not rounding rates clk: mediatek: fix clk-gate flag setting platform/x86: pmc_atom: Drop __initconst on dmi table clk: x86: Add system specific quirk to mark clocks as critical clk: meson: vid-pll-div: remove warning and return 0 on invalid config clk: meson: pll: fix rounding and setting a rate that matches precisely clk: meson-g12a: fix VPU clock parents clk: meson: g12a: fix VPU clock muxes mask clk: meson-gxbb: round the vdec dividers to closest clk: at91: fix programmable clock for sama5d2
2019-04-11platform/x86: pmc_atom: Drop __initconst on dmi tableStephen Boyd
It's used by probe and that isn't an init function. Drop this so that we don't get a section mismatch. Reported-by: kbuild test robot <lkp@intel.com> Cc: David Müller <dave.mueller@gmx.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Fixes: 7c2e07130090 ("clk: x86: Add system specific quirk to mark clocks as critical") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-10clk: x86: Add system specific quirk to mark clocks as criticalDavid Müller
Since commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are unconditionally gated off. Unfortunately this will break systems where these clocks are used for external purposes beyond the kernel's knowledge. Fix it by implementing a system specific quirk to mark the necessary pmc_plt_clks as critical. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: David Müller <dave.mueller@gmx.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-19Merge tag 'tag-chrome-platform-fixes-for-v5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fixes from Benson Leung: "Two fixes: - Fix locking and close a potential race condition in the new wilco_ec driver. - Fix a warning in cros_ec_debugfs on systems that do not support console logging, such as the Asus C201" * tag 'tag-chrome-platform-fixes-for-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: cancel/schedule logging work only if supported platform/chrome: Fix locking pattern in wilco_ec_mailbox()
2019-03-19platform/chrome: cros_ec_debugfs: cancel/schedule logging work only if supportedGuenter Roeck
The following traceback was reported on ASUS C201, which does not support console logging. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 361 at kernel/workqueue.c:3030 __flush_work+0x38/0x154 Modules linked in: snd_soc_hdmi_codec cros_ec_debugfs cros_ec_sysfs uvcvideo dw_hdmi_cec dw_hdmi_i2s_audio videobuf2_vmalloc cfg80211 gpio_charger rk_crypto rfkill videobuf2_memops videobuf2_v4l2 des_generic videobuf2_common ofpart m25p80 spi_nor tpm_i2c_infineon sbs_battery mtd tpm joydev cros_ec_dev coreboot_table evdev mousedev ip_tables x_tables [last unloaded: brcmutil] CPU: 2 PID: 361 Comm: systemd-sleep Not tainted 5.1.0-rc1-1-ARCH+ #1 Hardware name: Rockchip (Device Tree) [<c020e4b0>] (unwind_backtrace) from [<c020ac18>] (show_stack+0x10/0x14) [<c020ac18>] (show_stack) from [<c07a3e04>] (dump_stack+0x7c/0x9c) [<c07a3e04>] (dump_stack) from [<c0222748>] (__warn+0xd0/0xec) [<c0222748>] (__warn) from [<c022279c>] (warn_slowpath_null+0x38/0x44) [<c022279c>] (warn_slowpath_null) from [<c02365d0>] (__flush_work+0x38/0x154) [<c02365d0>] (__flush_work) from [<c023786c>] (__cancel_work_timer+0x114/0x1a4) [<c023786c>] (__cancel_work_timer) from [<bf33233c>] (cros_ec_debugfs_suspend+0x14/0x1c [cros_ec_debugfs]) [<bf33233c>] (cros_ec_debugfs_suspend [cros_ec_debugfs]) from [<c056a888>] (dpm_run_callback+0x64/0xcc) [<c056a888>] (dpm_run_callback) from [<c056ad2c>] (__device_suspend+0x174/0x3a8) [<c056ad2c>] (__device_suspend) from [<c056b9e0>] (dpm_suspend+0x174/0x1e0) [<c056b9e0>] (dpm_suspend) from [<c026b3e0>] (suspend_devices_and_enter+0x6c/0x50c) [<c026b3e0>] (suspend_devices_and_enter) from [<c026ba8c>] (pm_suspend+0x20c/0x274) [<c026ba8c>] (pm_suspend) from [<c026a628>] (state_store+0x54/0x88) [<c026a628>] (state_store) from [<c03cd2d0>] (kernfs_fop_write+0x114/0x180) [<c03cd2d0>] (kernfs_fop_write) from [<c035d48c>] (__vfs_write+0x1c/0x154) [<c035d48c>] (__vfs_write) from [<c035f9e8>] (vfs_write+0xb8/0x198) [<c035f9e8>] (vfs_write) from [<c035fbc0>] (ksys_write+0x3c/0x74) [<c035fbc0>] (ksys_write) from [<c0201000>] (ret_fast_syscall+0x0/0x4c) Exception stack(0xe9365fa8 to 0xe9365ff0) 5fa0: 00000004 beef8b28 00000004 beef8b28 00000004 00000000 5fc0: 00000004 beef8b28 02319170 00000004 beef8b28 00000004 b6f3d900 beef8b74 5fe0: 0000006c beef8a98 b6c0adac b6c66534 ---[ end trace f4ee5df14e8ea0ec ]--- If console logging is not supported, the work structure is never initialized, resulting in the traceback. Calling cancel/schedule functions conditionally fixes the problem. While at it, also fix error handling in the probe function. Reported-by: Urja Rannikko <urjaman@gmail.com> Cc: Urja Rannikko <urjaman@gmail.com> Fixes: 6fce0a2cf5a05 ("mfd / platform: cros_ec: Move debugfs attributes to its own driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benson Leung <bleung@chromium.org>
2019-03-18platform/chrome: Fix locking pattern in wilco_ec_mailbox()Nick Crews
Before, ec->data_buffer could be written to from multiple contexts at the same time. Since the ec is shared data, it needs to be inside the mutex as well. Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC") Signed-off-by: Nick Crews <ncrews@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2019-03-12Merge tag 'tag-chrome-platform-for-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: - SPDX identifier cleanup for platform/chrome - Cleanup series between mfd and chrome/platform, moving cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome - Wilco EC driver - Maintainership change to new group repository * tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: fix wilco-ec dependencies platform/chrome: wilco_ec: Add RTC driver platform/chrome: wilco_ec: Add support for raw commands in debugfs platform/chrome: Add new driver for Wilco EC platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree platform/chrome: cros_ec_sysfs: remove pr_fmt() define platform/chrome: cros_ec_lightbar: remove pr_fmt() define platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier platform/chrome: cros_ec_spi: switch to SPDX identifier platform/chrome: cros_ec_proto: switch to SPDX identifier platform/chrome: cros_ec_lpc: switch to SPDX identifier platform/chrome: cros_ec_i2c: switch to SPDX identifier platform/chrome: cros_ec_vbc: switch to SPDX identifier platform/chrome: cros_ec_sysfs: switch to SPDX identifier platform/chrome: cros_ec_lightbar: switch to SPDX identifier platform/chrome: cros_ec_debugfs: switch to SPDX identifier platform/chrome: cromeos_pstore: switch to SPDX identifier
2019-03-10Merge tag 'platform-drivers-x86-v5.1-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: - use MODULE_DEVICE_TABLE across several wmi drivers, keeping wmi_device_id and MODULE_ALIAS() declarations in sync - add several Ideapad models to the no_hw_rfkill list - add support for new Mellanox platforms, including new fan and LED functionality - address Dell keyboard backlight change event and power button release issues - update dell_rbu to use appropriate memory allocation mechanisms - several small fixes and Ice Lake support for intel_pmc_core - fix a suspend regression for Cherry Trail based devices in intel_int0002_vgpio - a few other routine fixes * tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits) MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list platform/x86: mlx-platform: Fix access mode for fan_dir attribute platform/x86: mlx-platform: Add UID LED for the next generation systems platform/x86: mlx-platform: Add extra CPLD for next generation systems platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE() platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h modpost: file2alias: define size of alias platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown platform/x86: intel_pmc_core: Add Package cstates residency info platform/x86: intel_pmc_core: Add ICL platform support ...
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-08Merge tag 'mfd-next-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add STMPE ADC Input driver - Add STMicroelectronics STPMIC1 Parent driver - Add STMicroelectronics STPMIC1 OnKey Misc driver - Add STMicroelectronics STPMIC1 Watchdog driver - Add Cirrus Logic Lochnagar Parent driver - Add TQ-Systems TQMX86 Parent driver New Device Support: - Add support for ADC to STMPE New (or moved) Functionality: - Move Lightbar functionality to its own driver; cros_ec_lightbar - Move VBC functionality to its own driver; cros_ec_vbc - Move VBC functionality to its own driver; cros_ec_vbc - Move DebugFS functionality to its own driver; cros_ec_debugfs - Move SYSFS functionality to its own driver; cros_ec_sysfs - Add support for input voltage options; tps65218 Fixes: - Use devm_* managed resources; cros_ec - Device Tree documentation; stmpe, aspeed-lpc, lochnagar - Trivial Clean-ups; stmpe - Rip out broken modular code; aat2870-core, adp5520, as3711, db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd, syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi, wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core - Kconfig fixups; INTEL_SOC_PMIC - Improve error path; sm501, sec-core - Use struct_size() helper; sm501 - Constify; at91-usart - Use pointers instead of copying data; at91-usart - Deliver proper return value; cros_ec_dev - Trivial formatting/whitespace; sec-core" * tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: mxs-lradc: Mark expected switch fall-through mfd: sec-core: Cleanup formatting to a consistent style mfd: tqmx86: IO controller with I2C, Wachdog and GPIO mfd: intel-lpss: Move linux/pm.h to the local header mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM mfd: tps68470: Drop unused MODULE_DEVICE_TABLE mfd: at91-usart: No need to copy mfd_cell in probe mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev mfd: lochnagar: Add support for the Cirrus Logic Lochnagar mfd: lochnagar: Add initial binding documentation dt-bindings: mfd: aspeed-lpc: Make parameter optional mfd: sec-core: Return gracefully instead of BUG() if device cannot match mfd: sm501: Use struct_size() in devm_kzalloc() mfd: sm501: Fix potential NULL pointer dereference mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies mfd: tps65218.c: Add input voltage options mfd: wm8400-core: Make it explicitly non-modular mfd: wm8350-core: Drop unused module infrastructure from non-modular code mfd: wm8350-i2c: Make it explicitly non-modular mfd: wm831x-core: Drop unused module infrastructure from non-modular code ...
2019-03-08x86: apuv2: remove unused variableArnd Bergmann
The driver was newly introduced but the version that got merged produces a harmless compiler warning: drivers/platform/x86/pcengines-apuv2.c: In function 'apu_board_init': drivers/platform/x86/pcengines-apuv2.c:211:6: error: unused variable 'rc' [-Werror=unused-variable] Remove the evidently useless variable. Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-By: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-03-08platform/x86: fix PCENGINES_APU2 Kconfig warningRandy Dunlap
Fix Kconfig warning for PCENGINES_APU2 symbol: WARNING: unmet direct dependencies detected for KEYBOARD_GPIO_POLLED Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=n] && GPIOLIB [=y] Selected by [y]: - PCENGINES_APU2 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] Add INPUT_KEYBOARD dependency for KEYBOARD_GPIO_POLLED. Add LEDS_CLASS dependency for LEDS_GPIO. Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-03-07platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill listFelix Eckhofer
Lenovo Ideapad S130-14IGM does not have a hardware radio switch. Add it to no_hw_rfkill to enable wireless connections. Signed-off-by: Felix Eckhofer <felix@eckhofer.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: mlx-platform: Fix access mode for fan_dir attributeVadim Pasternak
Fix access mode for "fan_dir" attribute from "write only" to "read only". This attribute is exposed to leds-mlxreg driver. The purpose of this attribute is to provide information about FAN direction setting on the system (forward or backward). It is relevant for the next generation systems MQMB7xx, MSN37xx, MSN34xx, MSN38xx. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: mlx-platform: Add UID LED for the next generation systemsVadim Pasternak
Add support for UID LED for the next generation systems MQMB7xx, MSN37xx, MSN34xx, MSN38xx. All these systems support UID LED control through the programmable device. The UID LED is to be exposed to leds-mlxreg driver. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: mlx-platform: Add extra CPLD for next generation systemsVadim Pasternak
Add support for CPLD4 for the next generation systems MQMB7xx, MSN37xx, MSN34xx, MSN38xx. All these systems are equipped with four programmable device. The version of this new device is to be exposed to sysfs through mlxreg-io register. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()Mattias Jacobsson
WMI drivers can if they have specified an array of struct wmi_device_id use the MODULE_DEVICE_TABLE() macro to automatically generate the appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync. Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of ↵Mattias Jacobsson
MODULE_ALIAS() WMI drivers can if they have specified an array of struct wmi_device_id use the MODULE_DEVICE_TABLE() macro to automatically generate the appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync. Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()Mattias Jacobsson
WMI drivers can if they have specified an array of struct wmi_device_id use the MODULE_DEVICE_TABLE() macro to automatically generate the appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync. Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()Mattias Jacobsson
WMI drivers can if they have specified an array of struct wmi_device_id use the MODULE_DEVICE_TABLE() macro to automatically generate the appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync. Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of ↵Mattias Jacobsson
MODULE_ALIAS() WMI drivers can if they have specified an array of struct wmi_device_id use the MODULE_DEVICE_TABLE() macro to automatically generate the appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync. Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of ↵Mattias Jacobsson
MODULE_ALIAS() WMI drivers can if they have specified an array of struct wmi_device_id use the MODULE_DEVICE_TABLE() macro to automatically generate the appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync. Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-07platform/x86: wmi: move struct wmi_device_id to mod_devicetable.hMattias Jacobsson
In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the definition of struct wmi_device_id to mod_devicetable.h and inline guid_string in the struct. Changing guid_string to an inline char array changes the loop conditions when looping over an array of struct wmi_device_id. Therefore update wmi_dev_match()'s loop to check for an empty guid_string instead of a NULL pointer. Signed-off-by: Mattias Jacobsson <2pi@mok.nu> [dvhart: Move UUID_STRING_LEN define to this patch] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-03-05platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tabletChristian Oder
Add touchscreen info for the CHUWUI Hi10 Air tablet. Signed-off-by: Christian Oder <me@myself5.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-03-05platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill listKai-Heng Feng
This platform doesn't have hardware switch for rfkill, so add it to no_hw_rfkill list to prevent wireless gets hard-blocked. BugLink: https://bugs.launchpad.net/bugs/1818204 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-03-05platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_listHugo Trovao
Lenovo Yoga C930 does not have a physical hw radio switch which makes ideapad_laptop to incorrectly disable radio while it should be working fine. Adding it to the no_hw_rfkill_list makes wireless available again without having to unload the module. Signed-off-by: Hugo Trovao <htrovao@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-03-05platform/chrome: fix wilco-ec dependenciesArnd Bergmann
When CROS_EC_LPC is set to =m, we get a link failure for a builtin wilco-ec module: drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_remove': core.c:(.text+0x26): undefined reference to `cros_ec_lpc_mec_destroy' drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_probe': core.c:(.text+0x18c): undefined reference to `cros_ec_lpc_mec_init' core.c:(.text+0x224): undefined reference to `cros_ec_lpc_mec_destroy' drivers/platform/chrome/wilco_ec/mailbox.o: In function `wilco_ec_mailbox': mailbox.c:(.text+0x104): undefined reference to `cros_ec_lpc_io_bytes_mec' The problem with the existing CROS_EC_LPC_MEC dependency is that this is only for a 'bool' symbol, so the information about the exported functions being in a module is lost on the way, and we actually have to depend on both CROS_EC_LPC and CROS_EC_LPC_MEC. Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-03-04Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPICA: Get rid of acpi_sleep_dispatch() ACPICA: Update version to 20190108 ACPICA: All acpica: Update copyrights to 2019 ACPICA: acpiexec: Add option to dump extra info for memory leaks ACPICA: Convert more ACPI errors to firmware errors
2019-02-24ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formattingErik Schmauss
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-23platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdownRajneesh Bhardwaj
On some platforms such as HP Elite-x2-1013-g3, the platform BIOS enforces XTAL to remain off before S0ix state can be achieved. This may not be optimum when we want to enable use cases like Low Power Audio, Wake on Voice etc which always need 24mhz clock. This introduces a new quirk to allow S0ix entry when all other conditions except for XTAL clock are good on a given platform. The extra power consumed by XTAL clock is about 2mw but it saves much more platform power compared to the system that remains in just PC10. Link: https://bit.ly/2UmnrFf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201579 Tested-by: "David E. Box" <david.e.box@linux.intel.com> Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: intel_pmc_core: Add Package cstates residency infoRajneesh Bhardwaj
This patch introduces a new debugfs entry to read current Package cstate residency counters. A similar variant of this patch was discussed earlier "https://patchwork.kernel.org/patch/9908563/" but didn't make it into mainline for various reasons. Current version only adds debugfs entry which is quite useful for S0ix debug but excludes the exported API that was there in initial version. Though there are tools like turbostat and socwatch which can also show this info but sometimes its more practical to have it here as it's hard to switch between various tools for S0ix debug when pmc_core driver is the primary debug tool. Internal and external customers have requested for this patch to be included in the PMC driver on many occasions and Google Chrome OS team has already included it in their builds. This becomes handy when requesting logs from external customers who may not always have above mentioned tools in their integrated kernel builds. Package cstate residency MSRs provide useful debug information about system idle states. In idle states system must enter deeper Package cstates. Package cstates depend not only on Core cstates but also on various IP block's power gating status and LTR values. For Intel Core SoCs Package C10 entry is a must for deeper sleep states such as S0ix. "Suspend-to-idle" should ideally take this path: PC0 -> PC10 -> S0ix. For S0ix debug, its logical to check for Package C10 residency first if for some reason system fails to enter S0ix. Please refer to this link for MSR details: https://software.intel.com/sites/default/files/managed/22/0d/335592-sdm-vol-4.pdf Usage: cat /sys/kernel/debug/pmc_core/package_cstate_show Package C2 : 0xec2e21735f Package C3 : 0xc30113ba4 Package C6 : 0x9ef4be15c5 Package C7 : 0x1e011904 Package C8 : 0x3c5653cfe5a Package C9 : 0x0 Package C10 : 0x16fff4289 Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "David E. Box" <david.e.box@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: intel_pmc_core: Add ICL platform supportRajneesh Bhardwaj
Icelake can resue most of the CNL PCH IPs as they are mostly similar. This patch enables the PMC Core driver for ICL family. It also addresses few other minor issues like upper case conversions and some tab alignments. Cc: "David E. Box" <david.e.box@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: intel_pmc_core: Convert to INTEL_CPU_FAM6 macroRajneesh Bhardwaj
INTEL_CPU_FAM6() macro provides better abstraction and reduces code size so use it instead of custom grown ICPU(). Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: intel_pmc_core: Avoid a u32 overflowRajat Jain
The register (SLP_S0_RES) at offset slp_s0_offset is a 32 bit register. The pmc_core_adjust_slp_s0_step() could overflow the u32 value while returning it after adjusting the step. Thus change to u64, this is already accounted for in debugfs attribute (that wants to output a 64 bit value). Signed-off-by: Rajat Jain <rajatja@google.com> Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: dell_rbu: fix lock imbalance in img_update_reallocChristoph Hellwig
We need to ensure rbu_data.lock is always held on return. Fixes: 289790a3ea94 ("platform/x86: dell_rbu: stop abusing the DMA API") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: ideapad-laptop: Add Y530-I5ICH-1060 to no_hw_rfkill listMark Levedahl
Commit 0252894f53fc2693672308 added the Legion Y530 to the no_hw_rfkill list, but missed a Y530 variant using the nvidia 1060 graphics card. I have had to blacklist ideapad-laptop as a result to get Wi-Fi working. dmidecode info: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: LENOVO Product Name: 81LB Version: Lenovo Legion Y530-15ICH-1060 Serial Number: <snip> UUID: <snip> Wake-up Type: Power Switch SKU Number: LENOVO_MT_81LB_BU_idea_FM_Legion Y530-15ICH-1060 Family: Legion Y530-15ICH-1060 Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/mellanox: mlxreg-hotplug: Fix KASAN warningVadim Pasternak
Fix the following KASAN warning produced when booting a 64-bit kernel: [ 13.334750] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70 [ 13.342166] Read of size 8 at addr ffff880235067178 by task kworker/2:1/42 [ 13.342176] CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 4.20.0-rc1+ #106 [ 13.342179] Hardware name: Mellanox Technologies Ltd. MSN2740/Mellanox x86 SFF board, BIOS 5.6.5 06/07/2016 [ 13.342190] Workqueue: events deferred_probe_work_func [ 13.342194] Call Trace: [ 13.342206] dump_stack+0xc7/0x15b [ 13.342214] ? show_regs_print_info+0x5/0x5 [ 13.342220] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 13.342234] ? _raw_write_lock_irqsave+0x100/0x100 [ 13.351593] print_address_description+0x73/0x260 [ 13.351603] kasan_report+0x260/0x380 [ 13.351611] ? find_first_bit+0x19/0x70 [ 13.351619] find_first_bit+0x19/0x70 [ 13.351630] mlxreg_hotplug_work_handler+0x73c/0x920 [mlxreg_hotplug] [ 13.351639] ? __lock_text_start+0x8/0x8 [ 13.351646] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.351656] ? mlxreg_hotplug_remove+0x1e0/0x1e0 [mlxreg_hotplug] [ 13.351663] ? regmap_volatile+0x40/0xb0 [ 13.351668] ? regcache_write+0x4c/0x90 [ 13.351676] ? mlxplat_mlxcpld_reg_write+0x24/0x30 [mlx_platform] [ 13.351681] ? _regmap_write+0xea/0x220 [ 13.351688] ? __mutex_lock_slowpath+0x10/0x10 [ 13.351696] ? devm_add_action+0x70/0x70 [ 13.351701] ? mutex_unlock+0x1d/0x40 [ 13.351710] mlxreg_hotplug_probe+0x82e/0x989 [mlxreg_hotplug] [ 13.351723] ? mlxreg_hotplug_work_handler+0x920/0x920 [mlxreg_hotplug] [ 13.351731] ? sysfs_do_create_link_sd.isra.2+0xf4/0x190 [ 13.351737] ? sysfs_rename_link_ns+0xf0/0xf0 [ 13.351743] ? devres_close_group+0x2b0/0x2b0 [ 13.351749] ? pinctrl_put+0x20/0x20 [ 13.351755] ? acpi_dev_pm_attach+0x2c/0xd0 [ 13.351763] platform_drv_probe+0x70/0xd0 [ 13.351771] really_probe+0x480/0x6e0 [ 13.351778] ? device_attach+0x10/0x10 [ 13.351784] ? __lock_text_start+0x8/0x8 [ 13.351790] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.351797] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.351806] ? __driver_attach+0x190/0x190 [ 13.351812] driver_probe_device+0x17d/0x1a0 [ 13.351819] ? __driver_attach+0x190/0x190 [ 13.351825] bus_for_each_drv+0xd6/0x130 [ 13.351831] ? bus_rescan_devices+0x20/0x20 [ 13.351837] ? __mutex_lock_slowpath+0x10/0x10 [ 13.351845] __device_attach+0x18c/0x230 [ 13.351852] ? device_bind_driver+0x70/0x70 [ 13.351859] ? __mutex_lock_slowpath+0x10/0x10 [ 13.351866] bus_probe_device+0xea/0x110 [ 13.351874] deferred_probe_work_func+0x1c9/0x290 [ 13.351882] ? driver_deferred_probe_add+0x1d0/0x1d0 [ 13.351889] ? preempt_notifier_dec+0x20/0x20 [ 13.351897] ? read_word_at_a_time+0xe/0x20 [ 13.351904] ? strscpy+0x151/0x290 [ 13.351912] ? set_work_pool_and_clear_pending+0x9c/0xf0 [ 13.351918] ? __switch_to_asm+0x34/0x70 [ 13.351924] ? __switch_to_asm+0x40/0x70 [ 13.351929] ? __switch_to_asm+0x34/0x70 [ 13.351935] ? __switch_to_asm+0x40/0x70 [ 13.351942] process_one_work+0x5cc/0xa00 [ 13.351952] ? pwq_dec_nr_in_flight+0x1e0/0x1e0 [ 13.351960] ? pci_mmcfg_check_reserved+0x80/0xb8 [ 13.351967] ? run_rebalance_domains+0x250/0x250 [ 13.351980] ? stack_access_ok+0x35/0x80 [ 13.351986] ? deref_stack_reg+0xa1/0xe0 [ 13.351994] ? schedule+0xcd/0x250 [ 13.352000] ? worker_enter_idle+0x2d6/0x330 [ 13.352006] ? __schedule+0xeb0/0xeb0 [ 13.352014] ? fork_usermode_blob+0x130/0x130 [ 13.352019] ? mutex_lock+0xa7/0x100 [ 13.352026] ? _raw_spin_lock_irq+0x98/0xf0 [ 13.352032] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 13.352037] i2c i2c-2: Added multiplexed i2c bus 11 [ 13.352043] worker_thread+0x181/0xa80 [ 13.352052] ? __switch_to_asm+0x34/0x70 [ 13.352058] ? __switch_to_asm+0x40/0x70 [ 13.352064] ? process_one_work+0xa00/0xa00 [ 13.352070] ? __switch_to_asm+0x34/0x70 [ 13.352076] ? __switch_to_asm+0x40/0x70 [ 13.352081] ? __switch_to_asm+0x34/0x70 [ 13.352086] ? __switch_to_asm+0x40/0x70 [ 13.352092] ? __switch_to_asm+0x34/0x70 [ 13.352097] ? __switch_to_asm+0x40/0x70 [ 13.352105] ? __schedule+0x3d6/0xeb0 [ 13.352112] ? migrate_swap_stop+0x470/0x470 [ 13.352119] ? save_stack+0x89/0xb0 [ 13.352127] ? kmem_cache_alloc_trace+0xe5/0x570 [ 13.352132] ? kthread+0x59/0x1d0 [ 13.352138] ? ret_from_fork+0x35/0x40 [ 13.352154] ? __schedule+0xeb0/0xeb0 [ 13.352161] ? remove_wait_queue+0x150/0x150 [ 13.352169] ? _raw_write_lock_irqsave+0x80/0x100 [ 13.352175] ? __lock_text_start+0x8/0x8 [ 13.352183] ? process_one_work+0xa00/0xa00 [ 13.352188] kthread+0x1a4/0x1d0 [ 13.352195] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 13.352202] ret_from_fork+0x35/0x40 [ 13.353879] The buggy address belongs to the page: [ 13.353885] page:ffffea0008d419c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 13.353890] flags: 0x2ffff8000000000() [ 13.353897] raw: 02ffff8000000000 ffffea0008d419c8 ffffea0008d419c8 0000000000000000 [ 13.353903] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 13.353905] page dumped because: kasan: bad access detected [ 13.353908] Memory state around the buggy address: [ 13.353912] ffff880235067000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.353917] ffff880235067080: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 [ 13.353921] >ffff880235067100: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 f2 f2 f2 f2 04 [ 13.353923] ^ [ 13.353927] ffff880235067180: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 00 00 00 00 00 [ 13.353931] ffff880235067200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 13.353933] ================================================================== The warning is caused by the below loop: for_each_set_bit(bit, (unsigned long *)&asserted, 8) { while "asserted" is declared as 'unsigned'. The casting of 32-bit unsigned integer pointer to a 64-bit unsigned long pointer. There are two problems here. It causes the access of four extra byte, which can corrupt memory The 32-bit pointer address may not be 64-bit aligned. The fix changes variable "asserted" to "unsigned long". Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: wmi: fix potential null pointer dereferenceMattias Jacobsson
In the function wmi_dev_match() the variable id is dereferenced without first performing a NULL check. The variable can for example be NULL if a WMI driver is registered without specifying the id_table field in struct wmi_driver. Add a NULL check and return that the driver can't handle the device if the variable is NULL. Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver") Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: dell_rbu: stop abusing the DMA APIChristoph Hellwig
For some odd reason dell_rbu actually seems to want the physical and not a bus address for the allocated buffer. Lets assume that actually is correct given that it is BIOS-related and that is a good source of insanity. In that case we should not use dma_alloc_coherent with a NULL device to allocate memory, but use GFP_DMA32 to stay under the 32-bit BIOS limit. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: ideapad-laptop: Fix no_hw_rfkill_list for Lenovo RESCUER ↵Yang Fan
R720-15IKBN Commit ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list") added DMI_MATCH(DMI_BOARD_NAME, "80WW") for Lenovo RESCUER R720-15IKBN. But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN, thus cause Wireless LAN still be hard blocked. On Lenovo RESCUER R720-15IKBN: ~$ cat /sys/class/dmi/id/sys_vendor LENOVO ~$ cat /sys/class/dmi/id/board_name Provence-5R3 ~$ cat /sys/class/dmi/id/product_name 80WW ~$ cat /sys/class/dmi/id/product_version Lenovo R720-15IKBN So on Lenovo RESCUER R720-15IKBN: DMI_SYS_VENDOR should match "LENOVO", DMI_BOARD_NAME should match "Provence-5R3", DMI_PRODUCT_NAME should match "80WW", DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN". Fix it, and in according with other entries in no_hw_rfkill_list, use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME. Fixes: ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list") Signed-off-by: Yang Fan <nullptr.cpp@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23platform/x86: asus-wmi: Allow loading on systems without the Asus Management ↵Hans de Goede
GUID hid-asus depends on asus-wmi through the asus_wmi_evaluate_method. Before this commit asus-wmi, and thus hid-asus, could not be loaded on non-Asus systems. This breaks using Asus bluetooth keyboards such as the Asus T100CHI keyboard with non Asus systems. This commit fixes this by allowing asus-wmi to load on systems without the Asus Management GUID. This is safe to do since all asus-wmi sub drivers use asus_wmi_register_driver which also checks for the GUID. This commit also improves the error messages in asus_wmi_register_driver to include "ASUS" in their description to make them more clear. This is important since we now rely on those errors when loaded on systems without the Asus Management GUID. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-22x86: pcengines apuv2 gpio/leds/keys platform driverEnrico Weigelt, metux IT consult
Driver for PCengines APUv2 board's front LEDs and Button, which are attached to AMD PCH GPIOs. Due to lack of dedicated ACPI entry, detecting the board via DMI. Cc: linux-gpio@vger.kernel.org Cc: linus.walleij@linaro.org Cc: bgolaszewski@baylibre.com Cc: dvhart@infradead.org Cc: platform-driver-x86@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21platform/chrome: wilco_ec: Add RTC driverNick Crews
This Embedded Controller has an internal RTC that is exposed as a standard RTC class driver with read/write functionality. The driver is added to the drivers/rtc/ so that the maintainer of that directory will be able to comment on this change, as that maintainer is the expert on this system. In addition, the driver code is called indirectly after a corresponding device is registered from core.c, as opposed to core.c registering the driver callbacks directly. To test: > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 > hwclock --show --rtc /dev/rtc1 2007-12-31 16:01:20.460959-08:00 > hwclock --systohc --rtc /dev/rtc1 > hwclock --show --rtc /dev/rtc1 2018-11-29 17:08:00.780793-08:00 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Nick Crews <ncrews@chromium.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared] Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21platform/chrome: wilco_ec: Add support for raw commands in debugfsNick Crews
Add a debugfs attribute that allows sending raw commands to the EC. This is useful for development and debug but should not be enabled in a production environment. To test: Get the EC firmware build date First send the request command > echo 00 f0 38 00 03 00 > raw Then read the result. "12/21/18" is in the middle of the response > cat raw 00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18....... Get the EC firmware build date First send the request command > echo 00 f0 38 00 03 00 > raw Then read the result. "12/21/18" is in the middle of the response > cat raw 00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18....... Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Nick Crews <ncrews@chromium.org> [Fix off-by-one error in wilco_ec/debugfs.c] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21platform/chrome: Add new driver for Wilco ECNick Crews
This EC is an incompatible variant of the typical Chrome OS embedded controller. It uses the same low-level communication and a similar protocol with some significant differences. The EC firmware does not support the same mailbox commands so it is not registered as a cros_ec device type. This commit exports the wilco_ec_mailbox() function so that other modules can use it to communicate with the EC. Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Nick Crews <ncrews@chromium.org> [Fix the sparse warning: symbol 'wilco_ec_transfer' was not declared] Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [Fix Kconfig dependencies for wilco_ec] Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21platform/x86: intel_pmc_core: Include Reserved IP for LTRRajneesh Bhardwaj
Recently introduced commit "platform/x86: intel_pmc_core: Show Latency Tolerance info <51337cd94d18184601ac0fb4cf1a02b8bbabc3d7> skipped the LTR from a reserved IP. Though this doesn't cause any functional issue but it is needed for the consumers of "ltr_ignore" as the index printing for "ltr_show" is missing. For example, w/o this change, a user that wants to ignore LTR from ME would do something like echo 5 > ltr_ignore but the index for ME is 6. Printing a reserved IP helps to properly calculate LTR ignore offsets. Cc: "David E. Box" <david.e.box@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-21platform/x86: intel_pmc_core: Fix file permissions for ltr_showRajneesh Bhardwaj
File permissions for ltr_show attribute should be similar to other debugfs attributes created by this driver. '0644' should be used only when there is a write operation desired such as for ltr_ignore. Cc: "David E. Box" <david.e.box@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 2eb150558bb7 ("platform/x86: intel_pmc_core: Show Latency Tolerance info") Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-02-14platform/x86: intel_cht_int33fe: Remove old style mux connectionsHeikki Krogerus
The new mux connection naming scheme is now in use, so dropping the connections still using the old names. From now on the same connection description named "mode-switch" is used with both the port and the alternate modes, so on CHT the DP alt mode will use the same connection as the port to get a handle to the mux device. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>