| Age | Commit message (Collapse) | Author |
|---|
|
The bq27xxx i2c-client may not have an IRQ, in which case
client->irq will be 0. bq27xxx_battery_i2c_probe() already has
an if (client->irq) check wrapping the request_threaded_irq().
But bq27xxx_battery_i2c_remove() unconditionally calls
free_irq(client->irq) leading to:
[ 190.310742] ------------[ cut here ]------------
[ 190.310843] Trying to free already-free IRQ 0
[ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310
Followed by a backtrace when unbinding the driver. Add
an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring
probe() to fix this.
Fixes: 444ff00734f3 ("power: supply: bq27xxx: Fix I2C IRQ race on remove")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240215155133.70537-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The driver uses regmap APIs so it should make sure they are available.
Fixes: c75f4bf6800b ("power: supply: Introduce MM8013 fuel gauge driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240204-mm8013-regmap-v1-1-7cc6b619b7d3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
is up"
This reverts commit b43f7ddc2b7a5a90447d96cb4d3c6d142dd4a810.
The offending commit deferred power-supply class device registration
until the service-started notification is received.
This triggers a NULL pointer dereference during boot of the Lenovo
ThinkPad X13s and SC8280XP CRD as battery status notifications can be
received before the service-start notification:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000005c0
...
Call trace:
_acquire+0x338/0x2064
acquire+0x1e8/0x318
spin_lock_irqsave+0x60/0x88
_supply_changed+0x2c/0xa4
battmgr_callback+0x1d4/0x60c [qcom_battmgr]
pmic_glink_rpmsg_callback+0x5c/0xa4 [pmic_glink]
qcom_glink_native_rx+0x58c/0x7e8
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
__handle_irq_event_percpu+0xb0/0x2d4
handle_irq_event+0x4c/0xb8
As trying to serialise this is non-trivial and risks missing
notifications, let's revert to registration during probe so that the
driver data is all set up once the service goes live.
The warning message during resume in case the aDSP firmware is not
running that motivated the change can be considered a feature and should
not be suppressed.
Fixes: b43f7ddc2b7a ("power: supply: qcom_battmgr: Register the power supplies after PDR is up")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240123160053.18331-1-johan+linaro@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When building with a version of GCC prior to 8.x, there is an error
around non-constant initializer elements:
drivers/power/supply/bq24190_charger.c:1978:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:1978:16: note: (near initialization for 'bq24190_chip_info_tbl[0].vbus_desc')
drivers/power/supply/bq24190_charger.c:1989:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:1989:16: note: (near initialization for 'bq24190_chip_info_tbl[1].vbus_desc')
drivers/power/supply/bq24190_charger.c:2000:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:2000:16: note: (near initialization for 'bq24190_chip_info_tbl[2].vbus_desc')
drivers/power/supply/bq24190_charger.c:2011:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:2011:16: note: (near initialization for 'bq24190_chip_info_tbl[3].vbus_desc')
drivers/power/supply/bq24190_charger.c:2022:16: error: initializer element is not constant
.vbus_desc = bq24296_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:2022:16: note: (near initialization for 'bq24190_chip_info_tbl[4].vbus_desc')
Clang versions prior to 17.x show a similar error:
drivers/power/supply/bq24190_charger.c:1978:16: error: initializer element is not a compile-time constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
1 error generated.
Newer compilers have decided to accept these structures as compile time
constants as an extension. To resolve this issue for all supported
compilers, change the vbus_desc member in 'struct bq24190_chip_info' to
a pointer, as it is only ever passed by reference anyways, and adjust
the assignments accordingly.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1973
Fixes: b150a703b56f ("power: supply: bq24190_charger: Add support for BQ24296")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240103-fix-bq24190_charger-vbus_desc-non-const-v1-1-115ddf798c70@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Merge power-supply fixes branch, which I never send for
the v6.7 cycle.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The BQ24296 is most similar to the BQ24196, but the:
1. OTG config is split from CHG config (REG01)
2. ICHG (Fast Charge Current limit) range is smaller (<=3008mA)
3. NTC fault is simplified to 2 bits
Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Link: https://lore.kernel.org/r/20231208034708.1248389-3-Hermes.Zhang@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Currently, a not-yet-entirely-initialized battmgr (e.g. with pd-mapper
not having yet started or ADSP not being up etc.) results in a couple of
zombie power supply devices hanging around.
This is particularly noticeable when trying to suspend the device (even
s2idle): the PSY-internal thermal zone is inaccessible and returns
-ENODEV, which causes log spam.
Register the power supplies only after we received some notification
indicating battmgr is ready to take off.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231218-topic-battmgr_fixture_attempt-v1-1-6145745f34fe@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
devm_kasprintf and devm_kzalloc return a pointer to dynamically
allocated memory which can be NULL upon failure.
Fixes: 8648aeb5d7b7 ("power: supply: add Qualcomm PMI8998 SMB2 Charger driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231124075021.1335289-1-chentao@kylinos.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This resolves checkpatch warning "quoted string split across lines" on:
1640: WARNING: quoted string split across lines
1641: WARNING: quoted string split across lines
The motive to use multiple MODULE_AUTHOR statements came from this
comment from "include/linux/module.h":
/*
* Author(s), use "Name <email>" or just "Name", for multiple
* authors use multiple MODULE_AUTHOR() statements/lines.
*/
#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
These were mentioned by checkpatch:
Errors:
(1) code indent should use tabs where possible
(2) switch and case should be at the same indent
Warnings:
(1) Missing a blank line after declarations
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
smatch complains that there is a buffer overflow and clang complains
'ret' is never read.
Smatch error:
drivers/power/supply/bq256xx_charger.c:1578 bq256xx_hw_init() error:
buffer overflow 'bq256xx_watchdog_time' 4 <= 4
Clang static checker:
Value stored to 'ret' is never read.
Add check for buffer overflow and error code from regmap_update_bits().
Fixes: 32e4978bb920 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231116041822.1378758-1-suhui@nfschina.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
RRT_ALRT register holds remaining battery time in minutes therefore it
needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs
expressed in seconds
Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Jan Palus <jpalus@fastmail.com>
Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This driver uses delayed work to perform periodic battery state read out.
This delayed work is not stopped across suspend and resume cycle. The
read out can occur early in the resume cycle. In case of an I2C variant
of this hardware, that read out triggers I2C transfer. That I2C transfer
may happen while the I2C controller is still suspended, which produces a
WARNING in the kernel log.
Fix this by introducing trivial PM ops, which stop the delayed work before
the system enters suspend, and schedule the delayed work right after the
system resumes.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104154920.68585-1-marex@denx.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
|
Merge power-supply fixes for the 6.6 cycle, so that changes
to the vexpress driver apply cleanly.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect ac->name to be NUL-terminated based on its usage with format
strings:
surface_charger.c:
190: ac->psy_desc.name = ac->name;
...
power_supply_core.c:
174: dev_dbg(&psy->dev, "%s: Found supply : %s\n",
175: psy->desc->name, epsy->desc->name);
Moreover, NUL-padding is not required as ac is already zero-allocated
before being passed to spwr_ac_init():
surface_charger.c:
240: ac = devm_kzalloc(&sdev->dev, sizeof(*ac), GFP_KERNEL);
241: if (!ac)
242: return -ENOMEM;
243:
244: spwr_ac_init(ac, sdev, p->registry, p->name);
... this means any future NUL-byte assignments (like the ones that
strncpy() does) are redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt for the more idiomatic strscpy() usage of:
(dest, src, sizeof(dest))
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-surface_charger-c-v1-1-93ddbf668e10@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bat->name to be NUL-terminated based on its usage with
strcmp():
power_supply_core.c:
445: return strcmp(psy->desc->name, name) == 0;
... and also by the manual `... - 1` for the length argument of the
original strncpy() invocation.
Furthermore, no NUL-padding is needed as bat is zero-allocated before
calling spwr_battery_init():
826: bat = devm_kzalloc(&sdev->dev, sizeof(*bat), GFP_KERNEL);
827: if (!bat)
828: return -ENOMEM;
829:
830: spwr_battery_init(bat, sdev, p->registry, p->name);
... this means any further NUL-byte assignments (like the ones that
strncpy() does) are redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of:
(dest, src, sizeof(dest)).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-surface_battery-c-v2-1-29ed16b2caf1@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect cm->psy_name_buf to be NUL-terminated based on its usage with
format strings:
1522: cm->charger_psy_desc.name = cm->psy_name_buf;
...
1587: dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
1587: cm->charger_psy_desc.name);
Moreover, NUL-padding is not required as `cm` is already zero-allocated
and thus any future NUL-byte assignments (like what strncpy() will do)
are redundant:
1437: cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt for the more idiomatic strscpy() usage of:
strscpy(dest, src, sizeof(dest)).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-charger-manager-c-v1-1-698f73bcad2a@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bq->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bq->model_name in
bq25980_get_charger_property():
| val->strval = bq->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
| ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
| ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
| return psy->desc->get_property(psy, psp, val);
with bq25980_get_charger_property():
| static const struct power_supply_desc bq25980_power_supply_desc = {
...
| .get_property = bq25980_get_charger_property,
Moreover, no NUL-padding is required as bq is zero-allocated in
bq25980_charger.c:
| bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) as this more closely ties the destination buffer and the
length.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com/
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq2515x_charger-c-v1-1-46664c6edf78@google.com/
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq25980_charger-c-v1-1-7b93be54537b@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bq->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bq->model_name in
bq256xx_get_charger_property():
| val->strval = bq->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
| ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
| ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
| return psy->desc->get_property(psy, psp, val);
with bq256xx_get_charger_property():
| static const struct power_supply_desc bq256xx_power_supply_desc = {
...
| .get_property = bq256xx_get_charger_property,
Moreover, no NUL-padding is required as bq is zero-allocated in
bq256xx_charger.c:
| bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) as this more closely ties the destination buffer and the
length.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com/
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq2515x_charger-c-v1-1-46664c6edf78@google.com/
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq256xx_charger-c-v1-1-2fad856124f9@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bq2515x->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bq2515x->model_name in
bq2515x_mains_get_property():
| val->strval = bq2515x->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
| ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
| ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
| return psy->desc->get_property(psy, psp, val);
with bq2515x_mains_get_property():
| static const struct power_supply_desc bq2515x_mains_desc = {
...
| .get_property = bq2515x_mains_get_property,
Moreover, no NUL-padding is required as bq2515x is zero-allocated in
bq2515x_charger.c:
| bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) as this more closely ties the destination buffer and the
length.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq2515x_charger-c-v1-1-46664c6edf78@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bdi->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bdi->model_name in
bq24190_charger_get_property():
1186 | val->strval = bdi->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
311 | ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
285 | ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
1210 | return psy->desc->get_property(psy, psp, val);
with bq24190_charger_get_property():
1320 | static const struct power_supply_desc bq24190_charger_desc = {
...
1325 | .get_property = bq24190_charger_get_property,
Moreover, no NUL-padding is required as bdi is zero-allocated in
bq24190_charger.c:
1798 | bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only DT based probing is used for the Motorola CPCAP charger driver, so
drop the !CONFIG_OF parts and redundant of_match_device() call.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231009172923.2457844-20-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
At the beginning of the probe function, "charger->dev" is set equal to
"&pdev->dev". Therefore it's more clear to subsequently use "charger->dev"
instead of "&pdev->dev".
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/39b4f00e010446e453905c8dc3ca1e47e9f2c5f8.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Currently the struct "rt5033_charger_data" is initialized rather complicated.
The cause lies inside of the struct "rt5033_charger", where struct
"rt5033_charger_data" is implemented as a pointer *chg.
Therefore, inside of struct "rt5033_charger" change the struct
"rt5033_charger_data" to non-pointer "chg". It is then initialized right
away and can be accessed more easily.
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/0aff8c2a18cf4b88ec3333f6679a8419dd76ca29.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Implement cable detection by extcon and handle the driver according to the
connector type.
There are basically three types of action: "set_charging", "set_otg" and
"set_disconnect".
A forth helper function to "unset_otg" was added because this is used in both
"set_charging" and "set_disconnect". In the first case it covers the rather
rare event that someone changes from OTG to charging without disconnect. In
the second case, when disconnecting, the values are set back to the ones from
initialization to return into a defined state.
Additionally, there is "set_mivr". When connecting to e.g. a laptop/PC, the
minimum input voltage regulation (MIVR) shall prevent a voltage drop if the
cable or the supply is weak. The MIVR value is set to 4600MV, same as in the
Android driver [1]. When disconnecting, MIVR is set back to DISABLED.
In the function rt5033_get_charger_state(): When in OTG mode, the chip
reports status "charging". Change this to "discharging" because there is
no charging going on in OTG mode [2].
Yang Yingliang detected missing mutex_unlock() in some error path and
suggested a fix [3]. The suggestion was squashed into this patch.
[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L499
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L686-L687
[3] https://lore.kernel.org/linux-pm/20230822030207.644738-1-yangyingliang@huawei.com
Tested-by: Raymond Hackley <raymondhackley@protonmail.com>
Co-developed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/cc4e37e510abbb0cdfa7faa8408da48c2cb448a4.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Enabling the tps65217-charger driver/module causes an interrupt conflict
with the vbus driver resulting in a probe failure.
The conflict is resolved by changing both driver's threaded interrupt
request function from IRQF_ONESHOT to IRQF_SHARED.
Signed-off-by: Grant B Adams <nemith592@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230823085430.6610-2-nemith592@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
string_lower from string_helpers.h can be used to modify the string
in-place. Use it to get rid of the custom str_to_lower().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230929-power_supply-string_lower-v1-1-3141a2634d53@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
There is a missing "ret = " assignment so this checks the same "ret"
value twice.
Fixes: c75f4bf6800b ("power: supply: Introduce MM8013 fuel gauge driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/c46b4408-bf1d-408d-9e6b-16b0ad272532@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add the missing endianness conversion when sending the enable request so
that the driver will work also on a hypothetical big-endian machine.
This issue was reported by sparse.
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Cc: stable@vger.kernel.org # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230929101649.20206-1-johan+linaro@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
qcom_battmgr_update_request.battery_id is written to using cpu_to_le32()
and should be of type __le32, just like all other 32bit integer requests
for qcom_battmgr.
Cc: stable@vger.kernel.org # 6.3
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309162149.4owm9iXc-lkp@intel.com/
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230919124222.1155894-1-sebastian.reichel@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The value of ret is zero when passed to dev_error_probe(), we are passing
zero to dev_err_probe() is a success which is incorrect.
Fix this by getting the error code using PTR_ERR().
Fixes: c75f4bf6800b ("power: supply: Introduce MM8013 fuel gauge driver")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309190838.eu8WS6sz-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230923114807.2829188-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
__counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct axp20x_usb_power.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175358.work.774-kees@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
__counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct axp20x_ac_power.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175355.work.006-kees@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time.
Fixes: 54c03bfd094f ("power: supply: Fix refcount leak in rk817_charger_probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
power_supply_uevent() which is called to emit a udev event on device
deletion attempts to use the power_supply_battery_info structure,
which is device-managed and has been freed before this point.
Fix this by not generating all battery/charger properties when the
device is about to be removed. This also avoids generating errors
when trying to access the hardware in hot-unplug scenarios.
==================================================================
BUG: KASAN: slab-use-after-free in power_supply_battery_info_has_prop (power_supply_core.c:872)
Read of size 4 at addr 0000000062e59028 by task python3/27
Call Trace:
power_supply_battery_info_has_prop (power_supply_core.c:872)
power_supply_uevent (power_supply_sysfs.c:504)
dev_uevent (drivers/base/core.c:2590)
kobject_uevent_env (lib/kobject_uevent.c:558)
kobject_uevent (lib/kobject_uevent.c:643)
device_del (drivers/base/core.c:3266 drivers/base/core.c:3831)
device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854)
power_supply_unregister (power_supply_core.c:1608)
devm_power_supply_release (power_supply_core.c:1515)
release_nodes (drivers/base/devres.c:506)
devres_release_group (drivers/base/devres.c:669)
i2c_device_remove (drivers/i2c/i2c-core-base.c:629)
device_remove (drivers/base/dd.c:570)
device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295)
device_driver_detach (drivers/base/dd.c:1332)
unbind_store (drivers/base/bus.c:247)
...
Allocated by task 27:
devm_kmalloc (drivers/base/devres.c:119 drivers/base/devres.c:829)
power_supply_get_battery_info (include/linux/device.h:316 power_supply_core.c:626)
__power_supply_register (power_supply_core.c:1408)
devm_power_supply_register (power_supply_core.c:1544)
bq256xx_probe (bq256xx_charger.c:1539 bq256xx_charger.c:1727) bq256xx_charger
i2c_device_probe (drivers/i2c/i2c-core-base.c:584)
really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658)
__driver_probe_device (drivers/base/dd.c:800)
device_driver_attach (drivers/base/dd.c:1128)
bind_store (drivers/base/bus.c:273)
...
Freed by task 27:
kfree (mm/slab_common.c:1073)
release_nodes (drivers/base/devres.c:503)
devres_release_all (drivers/base/devres.c:536)
device_del (drivers/base/core.c:3829)
device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854)
power_supply_unregister (power_supply_core.c:1608)
devm_power_supply_release (power_supply_core.c:1515)
release_nodes (drivers/base/devres.c:506)
devres_release_group (drivers/base/devres.c:669)
i2c_device_remove (drivers/i2c/i2c-core-base.c:629)
device_remove (drivers/base/dd.c:570)
device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295)
device_driver_detach (drivers/base/dd.c:1332)
unbind_store (drivers/base/bus.c:247)
...
==================================================================
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Fixes: 27a2195efa8d ("power: supply: core: auto-exposure of simple-battery data")
Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When CONFIG_EXTCON=m and CONFIG_CHARGER_PM8916_LBC=y, there are
build errors. Fix them by having CHARGER_PM8916_LBC depend on the
setting of EXTCON.
aarch64-linux-ld: drivers/power/supply/pm8916_lbc.o: in function `pm8916_lbc_charger_state_changed_irq':
pm8916_lbc.c:(.text+0xe8): undefined reference to `extcon_set_state_sync'
aarch64-linux-ld: drivers/power/supply/pm8916_lbc.o: in function `pm8916_lbc_charger_probe':
pm8916_lbc.c:(.text+0x638): undefined reference to `devm_extcon_dev_allocate'
aarch64-linux-ld: pm8916_lbc.c:(.text+0x650): undefined reference to `devm_extcon_dev_register'
aarch64-linux-ld: pm8916_lbc.c:(.text+0x688): undefined reference to `extcon_set_state_sync'
Fixes: f8d7a3d21160 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nikita Travkin <nikita@trvn.ru>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20230918205825.25864-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-33-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-32-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-31-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-27-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
