summaryrefslogtreecommitdiff
path: root/drivers/powercap/Makefile
AgeCommit message (Collapse)Author
2023-05-24powercap: intel_rapl: Introduce RAPL TPMI interface driverZhang Rui
The TPMI (Topology Aware Register and PM Capsule Interface) provides a flexible, extendable and PCIe enumerable MMIO interface for PM features. Intel RAPL (Running Average Power Limit) is one of the features that benefit from this. Using TPMI Interface has advantage over traditional MSR (Model Specific Register) interface, where a thread needs to be scheduled on the target CPU to read or write. Also the RAPL features vary between CPU models, and hence lot of model specific code. Here TPMI provides an architectural interface by providing hierarchical tables and fields, which will not need any model specific implementation. TPMI interface uses a PCI VSEC structure to expose the location of MMIO interface for PM feature enumeration and control. The Intel VSEC driver parses VSEC structures present in the PCI configuration space of the given device and creates an auxiliary device object for each of them. In particular, it creates an auxiliary device object representing TPMI that can be bound to by an auxiliary driver. Then the TPMI enumeration driver binds to the TPMI auxiliary device object created by the Intel VSEC driver, parses the PM Feature Structure (PFS) present in the TPMI MMIO region and creates device nodes for PM features described in the PFS. This RAPL TPMI Interface driver binds the RAPL auxiliary device created by the TPMI enumeration driver and expose the RAPL control to userspace via powercap sysfs class. RAPL TPMI details are published in the following document: https://github.com/intel/tpmi_power_management/blob/main/RAPL_TPMI_public_disclosure_FINAL.docx Note, for now, the RAPL TPMI Interface and RAPL MSR Interface cannot co-exists on the same platform (RAPL TPMI Interface is not supported on any platforms in the CPU model list for RAPL MSR Interface). Thus register the RAPL TPMI powercap control type with name "intel-rapl", the same as RAPL MSR Interface, so that it is transparent to userspace. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-25powercap: arm_scmi: Add SCMI Powercap based driverCristian Marussi
Add a powercap driver that, using the ARM SCMI Protocol to query the SCMI platform firmware for the list of existing Powercap domains, registers all of such discovered domains under the new 'arm-scmi' powercap control type. A new simple powercap zone and constraint is registered for all the SCMI powercap zones that are found. Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-04powercap/drivers/dtpm: Add dtpm devfreq with energy model supportDaniel Lezcano
Currently the dtpm supports the CPUs via cpufreq and the energy model. This change provides the same for the device which supports devfreq. Each device supporting devfreq and having an energy model can be added to the hierarchy. The concept is the same as the cpufreq DTPM support: the QoS is used to aggregate the requests and the energy model gives the value of the instantaneous power consumption ponderated by the load of the device. Cc: Chanwoo Choi <cwchoi00@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-5-daniel.lezcano@linaro.org
2020-12-22powercap/drivers/dtpm: Add CPU energy model based supportDaniel Lezcano
With the powercap dtpm controller, we are able to plug devices with power limitation features in the tree. The following patch introduces the CPU power limitation based on the energy model and the performance states. The power limitation is done at the performance domain level. If some CPUs are unplugged, the corresponding power will be subtracted from the performance domain total power. It is up to the platform to initialize the dtpm tree and add the CPU. Here is an example to create a simple tree with one root node called "pkg" and the CPU's performance domains. static int dtpm_register_pkg(struct dtpm_descr *descr) { struct dtpm *pkg; int ret; pkg = dtpm_alloc(NULL); if (!pkg) return -ENOMEM; ret = dtpm_register(descr->name, pkg, descr->parent); if (ret) return ret; return dtpm_register_cpu(pkg); } static struct dtpm_descr descr = { .name = "pkg", .init = dtpm_register_pkg, }; DTPM_DECLARE(descr); Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-22powercap/drivers/dtpm: Add API for dynamic thermal power managementDaniel Lezcano
On the embedded world, the complexity of the SoC leads to an increasing number of hotspots which need to be monitored and mitigated as a whole in order to prevent the temperature to go above the normative and legally stated 'skin temperature'. Another aspect is to sustain the performance for a given power budget, for example virtual reality where the user can feel dizziness if the GPU performance is capped while a big CPU is processing something else. Or reduce the battery charging because the dissipated power is too high compared with the power consumed by other devices. The userspace is the most adequate place to dynamically act on the different devices by limiting their power given an application profile: it has the knowledge of the platform. These userspace daemons are in charge of the Dynamic Thermal Power Management (DTPM). Nowadays, the dtpm daemons are abusing the thermal framework as they act on the cooling device state to force a specific and arbitrary state without taking care of the governor decisions. Given the closed loop of some governors that can confuse the logic or directly enter in a decision conflict. As the number of cooling device support is limited today to the CPU and the GPU, the dtpm daemons have little control on the power dissipation of the system. The out of tree solutions are hacking around here and there in the drivers, in the frameworks to have control on the devices. The common solution is to declare them as cooling devices. There is no unification of the power limitation unit, opaque states are used. This patch provides a way to create a hierarchy of constraints using the powercap framework. The devices which are registered as power limit-able devices are represented in this hierarchy as a tree. They are linked together with intermediate nodes which are just there to propagate the constraint to the children. The leaves of the tree are the real devices, the intermediate nodes are virtual, aggregating the children constraints and power characteristics. Each node have a weight on a 2^10 basis, in order to reflect the percentage of power distribution of the children's node. This percentage is used to dispatch the power limit to the children. The weight is computed against the max power of the siblings. This simple approach allows to do a fair distribution of the power limit. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11intel_rapl: abstract RAPL common codeZhang Rui
Split intel_rapl.c to intel_rapl_common.c and intel_rapl_msr.c, where intel_rapl_common.c contains the common code that can be used by both MSR and MMIO interface. intel_rapl_msr.c contains the implementation of RAPL MSR interface. Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02powercap / idle_inject: Add an idle injection frameworkDaniel Lezcano
Initially, the cpu_cooling device for ARM was changed by adding a new policy inserting idle cycles. The intel_powerclamp driver does a similar action. Instead of implementing idle injections privately in the cpu_cooling device, move the idle injection code in a dedicated framework and give the opportunity to other frameworks to make use of it. The framework relies on the smpboot kthreads which handles via its main loop the common code for hotplugging and [un]parking. This code was previously tested with the cpu cooling device and went through several iterations. It results now in split code and API exported in the header file. It was tested with the cpu cooling device with success. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rewrite of all comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-18PowerCap: Introduce Intel RAPL power capping driverJacob Pan
The Intel Running Average Power Limit (RAPL) technology provides platform software with the ability to monitor, control, and get notifications on power usage. This feature is present in all Sandy Bridge and later Intel processors. Newer models allow more fine grained controls to be applied. In RAPL, power control is divided into domains, which include package, DRAM controller, CPU core (Power Plane 0), graphics uncore (power plane 1), etc. The purpose of this driver is to expose the RAPL settings to userspace. Overall, RAPL fits in the new powercap class driver in that platform level power capping controls are exposed via this generic interface. This driver is based on an earlier patch from Zhang Rui. However, while the previous work was mainly focused on thermal monitoring the focus here is on the usability from user space perspective. References: https://lkml.org/lkml/2011/5/26/93 Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-17PowerCap: Add class driverSrinivas Pandruvada
The power capping framework providing a consistent interface between the kernel and user space that allows power capping drivers to expose their settings to user space in a uniform way. The overall design of the framework is described in the documentation added by the previous patch in this series. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>