summaryrefslogtreecommitdiff
path: root/drivers/powercap
AgeCommit message (Collapse)Author
2022-12-02powercap: idle_inject: Fix warnings with make W=1Srinivas Pandruvada
Fix following warning at three places: Function parameter or member 'ii_dev' not described. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-11-03powercap: Use kstrtobool() instead of strtobool()Christophe JAILLET
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-25powercap: arm_scmi: Add SCMI Powercap based driverCristian Marussi
Add a powercap driver that, using the ARM SCMI Protocol to query the SCMI platform firmware for the list of existing Powercap domains, registers all of such discovered domains under the new 'arm-scmi' powercap control type. A new simple powercap zone and constraint is registered for all the SCMI powercap zones that are found. Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-10Merge tag 'sched-core-2022-10-07' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Debuggability: - Change most occurances of BUG_ON() to WARN_ON_ONCE() - Reorganize & fix TASK_ state comparisons, turn it into a bitmap - Update/fix misc scheduler debugging facilities Load-balancing & regular scheduling: - Improve the behavior of the scheduler in presence of lot of SCHED_IDLE tasks - in particular they should not impact other scheduling classes. - Optimize task load tracking, cleanups & fixes - Clean up & simplify misc load-balancing code Freezer: - Rewrite the core freezer to behave better wrt thawing and be simpler in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting all the fallout. Deadline scheduler: - Fix the DL capacity-aware code - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period() - Relax/optimize locking in task_non_contending() Cleanups: - Factor out the update_current_exec_runtime() helper - Various cleanups, simplifications" * tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) sched: Fix more TASK_state comparisons sched: Fix TASK_state comparisons sched/fair: Move call to list_last_entry() in detach_tasks sched/fair: Cleanup loop_max and loop_break sched/fair: Make sure to try to detach at least one movable task sched: Show PF_flag holes freezer,sched: Rewrite core freezer logic sched: Widen TAKS_state literals sched/wait: Add wait_event_state() sched/completion: Add wait_for_completion_state() sched: Add TASK_ANY for wait_task_inactive() sched: Change wait_task_inactive()s match_state freezer,umh: Clean up freezer/initrd interaction freezer: Have {,un}lock_system_sleep() save/restore flags sched: Rename task_running() to task_on_cpu() sched/fair: Cleanup for SIS_PROP sched/fair: Default to false in test_idle_cores() sched/fair: Remove useless check in select_idle_core() sched/fair: Avoid double search on same cpu sched/fair: Remove redundant check in select_idle_smt() ...
2022-09-24powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domainZhang Rui
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard energy resolution as described in MSR_RAPL_POWER_UNIT. Remove the SPR dram_domain_energy_unit quirk. Fixes: 2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Cc: 5.9+ <stable@vger.kernel.org> # 5.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-21powercap: intel_rapl: fix UBSAN shift-out-of-bounds issueChao Qin
When value < time_unit, the parameter of ilog2() will be zero and the return value is -1. u64(-1) is too large for shift exponent and then will trigger shift-out-of-bounds: shift exponent 18446744073709551615 is too large for 32-bit type 'int' Call Trace: rapl_compute_time_window_core rapl_write_data_raw set_time_window store_constraint_time_window_us Signed-off-by: Chao Qin <chao.qin@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-07sched: Add TASK_ANY for wait_task_inactive()Peter Zijlstra
Now that wait_task_inactive()'s @match_state argument is a mask (like ttwu()) it is possible to replace the special !match_state case with an 'all-states' value such that any blocked state will match. Suggested-by: Ingo Molnar (mingo@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YxhkzfuFTvRnpUaH@hirez.programming.kicks-ass.net
2022-09-03powercap: intel_rapl: Add support for RAPTORLAKE_SZhang Rui
Add intel_rapl support for RAPTORLAKE_S platform, which behaves the same as RAPTORLAKE and RAPTORLAKE_P platforms. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-02Merge tag 'pm-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ...
2022-07-29Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'Rafael J. Wysocki
Merge core device power management changes for v5.20-rc1: - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). * pm-core: PM: runtime: Extend support for wakeirq for force_suspend|resume * pm-sleep: PM: hibernate: defer device probing when resuming from hibernation PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP * powercap: powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P powercap: intel_rapl: Add support for RAPTORLAKE_P * pm-domains: PM: domains: Ensure genpd_debugfs_dir exists before remove * pm-em: cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers
2022-07-26powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-PSumeet Pawnikar
Add Alder Lake-N and Raptor Lake-P to the list of processor models for which Power Limit4 is supported by the Intel RAPL driver. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15PM: EM: convert power field to micro-Watts precision and align driversLukasz Luba
The milli-Watts precision causes rounding errors while calculating efficiency cost for each OPP. This is especially visible in the 'simple' Energy Model (EM), where the power for each OPP is provided from OPP framework. This can cause some OPPs to be marked inefficient, while using micro-Watts precision that might not happen. Update all EM users which access 'power' field and assume the value is in milli-Watts. Solve also an issue with potential overflow in calculation of energy estimation on 32bit machine. It's needed now since the power value (thus the 'cost' as well) are higher. Example calculation which shows the rounding error and impact: power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000 power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18 power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961 power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21 max_freq = 2000MHz cost_a_mW = 18 * 2000MHz/500MHz = 72 cost_a_uW = 18000 * 2000MHz/500MHz = 72000 cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better cost_b_uW = 21961 * 2000MHz/600MHz = 73203 The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly better that the 'cost_b_uW' (this patch uses micro-Watts) and such would have impact on the 'inefficient OPPs' information in the Cpufreq framework. This patch set removes the rounding issue. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05powercap: intel_rapl: Add support for RAPTORLAKE_PGeorge D Sworo
Add RAPTORLAKE_P to the list of supported processor models in the Intel RAPL power capping driver. Signed-off-by: George D Sworo <george.d.sworo@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> [ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-06-28sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()Dietmar Eggemann
effective_cpu_util() already has a `int cpu' parameter which allows to retrieve the CPU capacity scale factor (or maximum CPU capacity) inside this function via an arch_scale_cpu_capacity(cpu). A lot of code calling effective_cpu_util() (or the shim sched_cpu_util()) needs the maximum CPU capacity, i.e. it will call arch_scale_cpu_capacity() already. But not having to pass it into effective_cpu_util() will make the EAS wake-up code easier, especially when the maximum CPU capacity reduced by the thermal pressure is passed through the EAS wake-up functions. Due to the asymmetric CPU capacity support of arm/arm64 architectures, arch_scale_cpu_capacity(int cpu) is a per-CPU variable read access via per_cpu(cpu_scale, cpu) on such a system. On all other architectures it is a a compile-time constant (SCHED_CAPACITY_SCALE). Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-4-vdonnefort@google.com
2022-05-23Merge branches 'pm-em' and 'pm-cpuidle'Rafael J. Wysocki
Marge Energy Model support updates and cpuidle updates for 5.19-rc1: - Update the Energy Model support code to allow the Energy Model to be artificial, which means that the power values may not be on a uniform scale with other devices providing power information, and update the cpufreq_cooling and devfreq_cooling thermal drivers to support artificial Energy Models (Lukasz Luba). - Make DTPM check the Energy Model type (Lukasz Luba). - Fix policy counter decrementation in cpufreq if Energy Model is in use (Pierre Gondois). - Add AlderLake processor support to the intel_idle driver (Zhang Rui). - Fix regression leading to no genpd governor in the PSCI cpuidle driver and fix the riscv-sbi cpuidle driver to allow a genpd governor to be used (Ulf Hansson). * pm-em: PM: EM: Decrement policy counter powercap: DTPM: Check for Energy Model type thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling Documentation: EM: Add artificial EM registration description PM: EM: Remove old debugfs files and print all 'flags' PM: EM: Change the order of arguments in the .active_power() callback PM: EM: Use the new .get_cost() callback while registering EM PM: EM: Add artificial EM flag PM: EM: Add .get_cost() callback * pm-cpuidle: cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used cpuidle: psci: Fix regression leading to no genpd governor intel_idle: Add AlderLake support
2022-05-19powercap: intel_rapl: remove redundant store to value after multiplyColin Ian King
There is no need to store the result of the multiply back to variable value after the multiplication. The store is redundant, replace *= with just *. Cleans up clang scan build warning: warning: Although the value stored to 'value' is used in the enclosing expression, the value is never actually read from 'value' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-18powercap: intel_rapl: add support for ALDERLAKE_NZhang Rui
Add ALDERLAKE_N to the list of supported processor models in the Intel RAPL power capping driver. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-11powercap: RAPL: Add Power Limit4 support for RaptorLakeSumeet Pawnikar
Add RaptorLake to the list of processor models for which Power Limit4 is supported by the Intel RAPL driver. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> [ rjw: Changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-22powercap: intel_rapl: add support for RaptorLakeZhang Rui
Add intel_rapl support for the RaptorLake platform. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13powercap: DTPM: Check for Energy Model typeLukasz Luba
The Energy Model power values might be artificial. In such case it's safe to bail out during the registration, since the PowerCap framework supports only micro-Watts. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01powercap: DTPM: Fix spelling mistake "initialze" -> "initialize"Colin Ian King
There is a spelling mistake in a pr_info() message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-01powercap: DTPM: dtpm_node_callback[] can be statickernel test robot
drivers/powercap/dtpm.c:525:22: warning: symbol 'dtpm_node_callback' was not declared. Should it be static? Fixes: 3759ec678e89 ("powercap/drivers/dtpm: Add hierarchy creation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-23powercap/dtpm_cpu: Add exit functionDaniel Lezcano
Now that we can destroy the hierarchy, the code must remove what it had put in place at the creation. In our case, the cpu hotplug callbacks. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-6-daniel.lezcano@linaro.org
2022-02-23powercap/dtpm: Move the 'root' reset placeDaniel Lezcano
The 'root' node is checked everytime a dtpm node is destroyed. When we reach the end of the hierarchy destruction function, we can unconditionnaly set the 'root' node to NULL again. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-5-daniel.lezcano@linaro.org
2022-02-23powercap/dtpm: Destroy hierarchy functionDaniel Lezcano
The hierarchy creation function exits but without a destroy hierarchy function. Due to that, the modules creating the hierarchy can not be unloaded properly because they don't have an exit callback. Provide the dtpm_destroy_hierarchy() function to remove the previously created hierarchy. The function relies on all the release mechanisms implemented by the underlying powercap framework. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-4-daniel.lezcano@linaro.org
2022-02-23powercap/dtpm: Fixup kfree for virtual nodeDaniel Lezcano
When the node is virtual there is no release function associated which can free the memory. Free the memory when no 'ops' exists. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-3-daniel.lezcano@linaro.org
2022-02-23powercap/dtpm_cpu: Reset per_cpu variable in the release functionDaniel Lezcano
The release function does not reset the per cpu variable when it is called. That will prevent creation again as the variable will be already from the previous creation. Fix it by resetting them. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-2-daniel.lezcano@linaro.org
2022-02-23powercap/dtpm: Change locking schemeDaniel Lezcano
The different functions are all called through the dtpm_create_hierarchy() which handle the mutex. The different functions are used in this context, consequently with the lock always held. Remove all locks taken in the function and add the lock in the hierarchy creation function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-1-daniel.lezcano@linaro.org
2022-02-04powercap/drivers/dtpm: Add dtpm devfreq with energy model supportDaniel Lezcano
Currently the dtpm supports the CPUs via cpufreq and the energy model. This change provides the same for the device which supports devfreq. Each device supporting devfreq and having an energy model can be added to the hierarchy. The concept is the same as the cpufreq DTPM support: the QoS is used to aggregate the requests and the energy model gives the value of the instantaneous power consumption ponderated by the load of the device. Cc: Chanwoo Choi <cwchoi00@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-5-daniel.lezcano@linaro.org
2022-02-04powercap/drivers/dtpm: Add CPU DT initialization supportDaniel Lezcano
Based on the previous DT changes in the core code, use the 'setup' callback to initialize the CPU DTPM backend. Code is reorganized to stick to the DTPM table description. No functional changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-4-daniel.lezcano@linaro.org
2022-02-04powercap/drivers/dtpm: Add hierarchy creationDaniel Lezcano
The DTPM framework is available but without a way to configure it. This change provides a way to create a hierarchy of DTPM node where the power consumption reflects the sum of the children's power consumption. It is up to the platform to specify an array of dtpm nodes where each element has a pointer to its parent, except the top most one. The type of the node gives the indication of which initialization callback to call. At this time, we can create a virtual node, where its purpose is to be a parent in the hierarchy, and a DT node where the name describes its path. In order to ensure a nice self-encapsulation, the DTPM subsys array contains a couple of initialization functions, one to setup the DTPM backend and one to initialize it up. With this approach, the DTPM framework has a very few material to export. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-3-daniel.lezcano@linaro.org
2022-02-04powercap/drivers/dtpm: Convert the init table section to a simple arrayDaniel Lezcano
The init table section is freed after the system booted. However the next changes will make per module the DTPM description, so the table won't be accessible when the module is loaded. In order to fix that, we should move the table to the data section where there are very few entries and that makes strange to add it there. The main goal of the table was to keep self-encapsulated code and we can keep it almost as it by using an array instead. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-2-daniel.lezcano@linaro.org
2021-12-27Merge back earlier power capping changes for v5.17Rafael J. Wysocki
2021-12-23powercap/drivers/dtpm: Reduce trace verbosityDaniel Lezcano
The traces when registering a powerzone is at the pr_info level and should be changed to pr_debug as requested by Greg-KH. Cc: Greg KH <gregkh@linuxfoundation.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lkml.kernel.org/r/YGAnRx8SiZHFPpY6@kroah.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20211123101601.2433340-2-daniel.lezcano@linaro.org
2021-12-17powercap: fix typo in a comment in idle_inject.cJason Wang
Drop superfluous "the" from the comment in line 15. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> [ rjw: Subject edit, new changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-17powercap: intel_rapl: support new layout of Psys PowerLimit Register on SPRZhang Rui
On Sapphire Rapids, the layout of the Psys domain Power Limit Register is different from from what it was before. Enhance the code to support the new Psys PL register layout. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reported-and-tested-by: Alkattan Dana <dana.alkattan@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-03powercap: DTPM: Drop unused local variable from init_dtpm()Rafael J. Wysocki
The dtpm_descr variable in init_dtpm() is not used after commit f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"), so drop it. Fixes: f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-01powercap/drivers/dtpm: Disable DTPM at boot timeDaniel Lezcano
The DTPM framework misses a mechanism to set it up. That is currently under review but will come after the next cycle. As the distro are enabling all the kernel options, the DTPM framework is enabled on platforms where the energy model is not implemented, thus making the framework inconsistent and disrupting the CPU frequency scaling service. Remove the initialization at boot time as a hot fix. Fixes: 7a89d7eacf8e ("powercap/drivers/dtpm: Simplify the dtpm table") Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-By: Doug Smythies <dsmythies@telus.net> Tested-By: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-10powercap: DTPM: Fix suspend failure and kernel warningDaniel Lezcano
When the ENERGY_MODEL and DTPM_CPU are enabled but actually without any energy model, at cpu hotplug time, the dead cpuhp callback fails leading to the warning. Actually, the check could be simplified and we only do an action if the dtpm cpu is enabled, otherwise we bail out without error. Fixes: 7a89d7eacf8e ("powercap/drivers/dtpm: Simplify the dtpm table") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-21powercap/drivers/dtpm: Fix power limit initializationDaniel Lezcano
When a DTPM node is registered its power limit must be initialized to the power max. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210318205238.21937-1-daniel.lezcano@linaro.org
2021-10-21powercap/drivers/dtpm: Scale the power with the loadDaniel Lezcano
Currently the power consumption is based on the current OPP power assuming the entire performance domain is fully loaded. That gives very gross power estimation and we can do much better by using the load to scale the power consumption. Use the utilization to normalize and scale the power usage over the max possible power. Tested on a rock960 with 2 big CPUS, the power consumption estimation conforms with the expected one. Before this change: ~$ ~/dhrystone -t 1 -l 10000& ~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw 2260000 After this change: ~$ ~/dhrystone -t 1 -l 10000& ~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw 1130000 ~$ ~/dhrystone -t 2 -l 10000& ~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw 2260000 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210312130411.29833-5-daniel.lezcano@linaro.org
2021-10-21powercap/drivers/dtpm: Use container_of instead of a private data fieldDaniel Lezcano
The dtpm framework provides an API to allocate a dtpm node. However when a backend dtpm driver needs to allocate a dtpm node it must define its own structure and store the pointer of this structure in the private field of the dtpm structure. It is more elegant to use the container_of macro and add the dtpm structure inside the dtpm backend specific structure. The code will be able to deal properly with the dtpm structure as a generic entity, making all this even more self-encapsulated. The dtpm_alloc() function does no longer make sense as the dtpm structure will be allocated when allocating the device specific dtpm structure. The dtpm_init() is provided instead. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210312130411.29833-4-daniel.lezcano@linaro.org
2021-10-21powercap/drivers/dtpm: Simplify the dtpm tableDaniel Lezcano
The dtpm table is an array of pointers, that forces the user of the table to define initdata along with the declaration of the table entry. It is more efficient to create an array of dtpm structure, so the declaration of the table entry can be done by initializing the different fields. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210312130411.29833-3-daniel.lezcano@linaro.org
2021-10-21powercap/drivers/dtpm: Encapsulate even more the codeDaniel Lezcano
In order to increase the self-encapsulation of the dtpm generic code, the following changes are adding a power update ops to the dtpm ops. That allows the generic code to call directly the dtpm backend function to update the power values. The power update function does compute the power characteristics when the function is invoked. In the case of the CPUs, the power consumption depends on the number of online CPUs. The online CPUs mask is not up to date at CPUHP_AP_ONLINE_DYN state in the tear down callback. That is the reason why the online / offline are at separate state. As there is already an existing state for DTPM, this one is only moved to the DEAD state, so there is no addition of new state with these changes. The dtpm node is not removed when the cpu is unplugged. That simplifies the code for the next changes and results in a more self-encapsulated code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210312130411.29833-1-daniel.lezcano@linaro.org
2021-08-25powercap: Add Power Limit4 support for Alder Lake SoCSumeet Pawnikar
Add Power Limit4 support for Alder Lake SoC. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-04powercap: intel_rapl: Replace deprecated CPU-hotplug functionsSebastian Andrzej Siewior
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-18powercap: Add Hygon Fam18h RAPL supportPu Wen
Enable Hygon Fam18h RAPL support for the power capping framework. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-01powercap/drivers/dtpm: Add the experimental label to the option descriptionDaniel Lezcano
The DTPM framework will evolve in the next cycles. Let's add a temporary EXPERIMENTAL tag to the option so users will be aware the API may change over time. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-01powercap/drivers/dtpm: Fix root node initializationDaniel Lezcano
The root node is not set to NULL when the dtpm root node is removed. Consequently, it is not possible to create a new root as it is already set. Set the root node to NULL when the last node is removed. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-12powercap: intel_rapl: Use topology interface in rapl_init_domains()Yunfeng Ye
It's not a good idea to access the phys_proc_id of cpuinfo directly. Use topology_physical_package_id(cpu) instead. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>