summaryrefslogtreecommitdiff
path: root/drivers/pwm/pwm-bcm-iproc.c
AgeCommit message (Collapse)Author
2021-05-25pwm: Simplify all drivers with explicit of_pwm_n_cells = 3Uwe Kleine-König
With the previous commit there is no need for the lowlevel driver any more to specify it it uses two or three cells. So simplify accordingly. The only non-trival change affects the pwm-rockchip driver: It used to only support three cells if the hardware supports polarity. Now the default number depends on the device tree which has to match hardware anyhow (and if it doesn't the error is just a bit delayed as a PWM handle with an inverted setting is catched when pwm_apply_state() is called). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-09pwm: bcm-iproc: Free resources only after pwmchip_remove()Uwe Kleine-König
Before pwmchip_remove() returns the PWM is expected to be functional. So remove the pwmchip before disabling the clock. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22pwm: Always allocate PWM chip base ID dynamicallyUwe Kleine-König
Since commit 5e5da1e9fbee ("pwm: ab8500: Explicitly allocate pwm chip base dynamically") all drivers use dynamic ID allocation explicitly. New drivers are supposed to do the same, so remove support for driver specified base IDs and drop all assignments in the low-level drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: bcm-iproc: Convert to devm_platform_ioremap_resource()Yangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-07-30pwm: bcm-iproc: handle clk_get_rate() returnRayagonda Kokatanur
Handle clk_get_rate() returning 0 to avoid possible division by zero. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-07-30pwm: bcm-iproc: Remove impossible comparison when validating duty cycleLee Jones
'duty' here is an unsigned int, thus checking for <0 will always evaluate to false. Fixes the following W=1 warning: drivers/pwm/pwm-bcm-iproc.c:147:12: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-pwm@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-11-08pwm: bcm-iproc: Prevent unloading the driver module while in useUwe Kleine-König
The owner member of struct pwm_ops must be set to THIS_MODULE to increase the reference count of the module such that the module cannot be removed while its code is in use. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: Ensure pwm_apply_state() doesn't modify the state argumentUwe Kleine-König
It is surprising for a PWM consumer when the variable holding the requested state is modified by pwm_apply_state(). Consider for example a driver doing: #define PERIOD 5000000 #define DUTY_LITTLE 10 ... struct pwm_state state = { .period = PERIOD, .duty_cycle = DUTY_LITTLE, .polarity = PWM_POLARITY_NORMAL, .enabled = true, }; pwm_apply_state(mypwm, &state); ... state.duty_cycle = PERIOD / 2; pwm_apply_state(mypwm, &state); For sure the second call to pwm_apply_state() should still have state.period = PERIOD and not something the hardware driver chose for a reason that doesn't necessarily apply to the second call. So declare the state argument as a pointer to a const type and adapt all drivers' .apply callbacks. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: Add support for Broadcom iProc PWM controllerYendapally Reddy Dhananjaya Reddy
Add support for the PWM controller present in Broadcom's iProc family of SoCs. It has been tested on the Northstar+ bcm958625HR board. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> [thierry.reding@gmail.com: bunch of coding style fixes, cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>