summaryrefslogtreecommitdiff
path: root/drivers/pwm/pwm-lpc32xx.c
AgeCommit message (Collapse)Author
2016-07-11pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default valueSylvain Lemieux
The PWM_PIN_LEVEL bit is leave unset by the kernel PWM driver. Prior to commit 08ee77b5a5de27ad63c92262ebcb4efe0da93b58, the PWM_PIN_LEVEL bit was always clear when the PWM was disable and a 0 logic level was apply to the output. According to the LPC32x0 User Manual [1], the default value for bit 30 (PWM_PIN_LEVEL) is 0. This change initialize the pin level to 0 (default value) and update the register value accordingly. [1] http://www.nxp.com/documents/user_manual/UM10326.pdf Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: lpc32xx: return ERANGE, if requested period is not supportedVladimir Zapolskiy
Instead of silent acceptance of unsupported requested configuration for PWM period and setting the boundary supported value, return -ERANGE to a caller. Duty period value equal to 0 or period is still accepted to allow configuration by PWM sysfs interface, when it is set to 0 by default. For reference this is a list of restrictions on period_ns == 1/freq: | PWM parent clock | parent clock divisor | max freq | min freq | +------------------+----------------------+----------+----------+ | HCLK == 13 MHz | 1 (min) | 50.7 KHz | 198.3 Hz | | HCLK == 13 MHz | 15 (max) | 3.38 KHz | 13.22 Hz | | RTC == 32.7 KHz | 1 (min) | 128 Hz | 0.5 Hz | | RTC == 32.7 KHz | 15 (max) | 8.533 Hz | 0.033 Hz | Note that PWM sysfs interface does not support setting of period more than NSEC_PER_SEC / MAX_INT32 ~ 2 seconds, however this PWM controller supports a period up to 30 seconds. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: lpc32xx: fix and simplify duty cycle and period calculationsVladimir Zapolskiy
The change fixes a problem, if duty_ns is too small in comparison to period_ns (as a valid corner case duty_ns is 0 ns), then due to PWM_DUTY() macro applied on a value the result is overflowed over 8 bits, and instead of the highest bitfield duty cycle value 0xff the invalid duty cycle bitfield value 0x00 is written. For reference the LPC32xx spec defines PWMx_DUTY bitfield description is this way and it seems to be correct: [Low]/[High] = [PWM_DUTY]/[256-PWM_DUTY], where 0 < PWM_DUTY <= 255. In addition according to my oscilloscope measurements LPC32xx PWM is "tristate" in sense that it produces a wave with floating min/max voltage levels for different duty cycle values, for corner cases: PWM_DUTY == 0x01 => signal is in range from -1.05v to 0v .... PWM_DUTY == 0x80 => signal is in range from -0.75v to +0.75v .... PWM_DUTY == 0xff => signal is in range from 0v to +1.05v PWM_DUTY == 0x00 => signal is around 0v, PWM is off Due to this peculiarity on very long period ranges (less than 1KHz) and odd pre-divider values PWM generated wave does not remind a clock shape signal, but rather a heartbit shape signal with positive and negative peaks, so I would recommend to use high-speed HCLK clock as a PWM parent clock and avoid using RTC clock as a parent. The change corrects PWM output in corner cases and prevents any possible overflows in calculation of values for PWM_DUTY and PWM_RELOADV bitfields, thus helper macro definitions may be removed. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: lpc32xx: make device usable with common clock frameworkVladimir Zapolskiy
As a preparatory change for switching LPC32xx mach support to common clock framework fix clk_enable/clk_disable calls without matching clk_prepare/clk_unprepare. The driver can not be used on a platform with common clock framework until clk_prepare/clk_unprepare calls are added, otherwise clk_enable calls will fail and a WARN is generated: # echo 1 > /sys/bus/platform/drivers/lpc32xx-pwm/4005c000.pwm/pwm/pwmchip0/pwm0/enable ------------[ cut here ]------------ WARNING: CPU: 0 PID: 701 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: sc16is7xx CPU: 0 PID: 701 Comm: sh Tainted: G W 4.3.0-rc2+ #171 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_pwm_enable+0x1c/0x40) [<>] (lpc32xx_pwm_enable) from [<>] (pwm_enable+0x48/0x5c) [<>] (pwm_enable) from [<>] (pwm_enable_store+0x5c/0x78) [<>] (pwm_enable_store) from [<>] (dev_attr_store+0x20/0x2c) [<>] (dev_attr_store) from [<>] (sysfs_kf_write+0x44/0x50) [<>] (sysfs_kf_write) from [<>] (kernfs_fop_write+0x134/0x194) [<>] (kernfs_fop_write) from [<>] (__vfs_write+0x34/0xdc) [<>] (__vfs_write) from [<>] (vfs_write+0xb8/0x140) [<>] (vfs_write) from [<>] (SyS_write+0x50/0x90) [<>] (SyS_write) from [<>] (ret_fast_syscall+0x0/0x38) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: lpc32xx: correct number of PWM channels from 2 to 1Vladimir Zapolskiy
LPC32xx SoC has two independent PWM controllers, they have different clock parents, clock gates and even slightly different controls, and each of these two PWM controllers has one output channel. Due to almost similar controls arranged in a row it is incorrectly set that there is one PWM controller with two channels, fix this problem, which at the moment prevents separate configuration of different clock parents and gates for both PWM controllers. The change makes previous PWM device node description incompatible with this update. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-20pwm: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-08pwm: lpc32xx: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: simplify use of devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: Fill in missing .owner fieldsThierry Reding
Some drivers don't set the .owner fields of the struct device_driver or struct pwm_ops, which causes the module usage count to become wrong. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-04-23pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_configAxel Lin
lpc32xx_pwm_config() is supposed to set duty_ns and period_ns, it should not change PWM_ENABLE bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-23pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]Axel Lin
According to the LPC32x0 User Manual [1]: For both PWM1 and PWM2 Control Registers: BIT 31: This bit gates the PWM_CLK signal and enables the external output pin to the PWM_PIN_STATE logical level. 0 = PWM disabled. (Default) 1 = PWM enabled So in lpc32xx_pwm_enable(), we should set PWM_ENABLE bit. In lpc32xx_pwm_disable(), we should just clear PWM_ENABLE bit rather than write 0 to the register which will also clear PWMx_RELOADV and PWMx_DUTY bits. [1] http://www.nxp.com/documents/user_manual/UM10326.pdf Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-23pwm: Constify OF match tablesThierry Reding
A few drivers already annotate this properly. Make the same change for all other OF supporting drivers. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-01-22pwm: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-19Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm changes from Thierry Reding: "A new driver has been added for the SPEAr platform and the TWL4030/6030 driver has been replaced by two drivers that control the regular PWMs and the PWM driven LEDs provided by the chips. The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have all been improved and the device tree bindings now support the PWM signal polarity." Fix up trivial conflicts due to __devinit/exit removal. * tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits) pwm: samsung: add missing s3c->pwm_id assignment pwm: lpc32xx: Set the chip base for dynamic allocation pwm: lpc32xx: Properly disable the clock on device removal pwm: lpc32xx: Fix the PWM polarity pwm: i.MX: eliminate build warning pwm: Export of_pwm_xlate_with_flags() pwm: Remove pwm-twl6030 driver pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs pwm: New driver to support PWMs on TWL4030/6030 series of PMICs pwm: pwm-tiehrpwm: pinctrl support pwm: tiehrpwm: Add device-tree binding pwm: pwm-tiehrpwm: Adding TBCLK gating support. pwm: pwm-tiecap: pinctrl support pwm: tiecap: Add device-tree binding pwm: Add TI PWM subsystem driver pwm: Device tree support for PWM polarity pwm: vt8500: Ensure PWM clock is enabled during pwm_config pwm: vt8500: Fix build error pwm: spear: Staticize spear_pwm_config() pwm: Add SPEAr PWM chip driver support ...
2012-12-06pwm: lpc32xx: Set the chip base for dynamic allocationAlban Bedel
Doing so allows the base to be allocated dynamically at runtime and makes it easier for the chip to coexist with other PWM chips. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06pwm: lpc32xx: Properly disable the clock on device removalAlban Bedel
A single clock is used for all PWMs meaning the clock's reference count might be between 0 and N when .remove() is called. Instead of a single clk_disable() call pwm_disable() on each PWM, to ensure that clk_disable() is called for each PWM that is still enabled. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06pwm: lpc32xx: Fix the PWM polarityAlban Bedel
The duty cycles value goes from 1 (99% HIGH) to 256 (0% HIGH) but it is stored modulo 256 in the register as it is only 8 bits wide. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-28pwm: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pwm: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-23pwm: add lpc32xx PWM supportAlexandre Pereira da Silva
Add lpc32xx SOC PWM driver. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>