summaryrefslogtreecommitdiff
path: root/drivers/pwm/pwm-lpss-pci.c
AgeCommit message (Collapse)Author
2017-04-06pwm: lpss: Set enable-bit before waiting for update-bit to go lowHans de Goede
At least on cherrytrail, the update bit will never go low when the enabled bit is not set. This causes the backlight on my cube iwork8 air tablet to never turn on again after being turned off because in the pwm_lpss_apply enable path pwm_lpss_update will fail causing an error exit and the enable-bit to never get set. Any following pwm_lpss_apply calls will fail the pwm_lpss_is_updating check. Since the docs say that the update bit should be set before the enable-bit, split pwm_lpss_update into setting the update-bit and pwm_lpss_wait_for_update, and move the pwm_lpss_wait_for_update call in the enable path to after setting the enable-bit. Fixes: 10d56a4 ("pwm: lpss: Avoid reconfiguring while UPDATE bit...") Cc: Ilkka Koskinen <ilkka.koskinen@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: lpss: Split Tangier configurationAndy Shevchenko
As a preparation for special treatment for Broxton we split Tangier configuration. Fixes: b89b4b7a3d0a ("pwm: lpss: pci: Enable PWM module on Intel Edison") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Add Intel Gemini Lake PCI IDMika Westerberg
Intel Gemini Lake PWM is pretty much same as used in Intel Broxton. Add this new PCI ID to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Do not export board infos for different PWM typesAndy Shevchenko
The PWM LPSS probe drivers just pass a pointer to the exported board info structures to pwm_lpss_probe() based on device PCI or ACPI ID. In order to remove the knowledge of specific devices from library part of the driver and reduce noise in exported namespace just duplicate the board info structures and stop exporting them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: lpss: pci: Enable PWM module on Intel EdisonAndy Shevchenko
Intel Edison has 4 PWM channels on the die with the same IP as in Broxton. Enable it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-06pwm: lpss: Add support for runtime PMQipeng Zha
To be able to save some power when PWM is not in use, add support for runtime PM for this driver. This also allows the platform to transition to low power S0ix states when the system is idle. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-06pwm: lpss: Add more Intel Broxton IDsMika Westerberg
Add more Intel Broxton ACPI and PCI IDs to the driver supported devices list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-06pwm: lpss: Support all four PWMs on Intel BroxtonMika Westerberg
Intel Broxton has similar PWM than Intel Braswell but instead of one it has four PWMs included in one PCI/ACPI device. This patch adds support for all the four PWMs and changes the PCI part of the driver to use 'pwm_lpss_bxt_info' instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-06-12pwm: lpss: pci: Add support for Broxton platformQipeng Zha
Add PCI device IDs for Broxton platform. Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23pwm: lpss: pci: Move to use pcim_enable_device()Andy Shevchenko
Let's use managed functions for this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-23pwm: lpss: Properly split driver to partsAndy Shevchenko
The driver consists of core, PCI, and platform parts. It would be better to split them into separate files. The platform driver is now called pwm-lpss-platform. Thus, previously set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe side since it seems no one from outside Intel is using it for now. While here, move to use macros module_pci_driver() and module_platform_driver(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> [thierry.reding: change select to depends on PWM_LPSS, cleanup] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>