summaryrefslogtreecommitdiff
path: root/drivers/pwm/pwm-sun4i.c
AgeCommit message (Collapse)Author
2021-09-02pwm: sun4i: Don't check the return code of pwmchip_remove()Uwe Kleine-König
pwmchip_remove() returns always 0. Don't use the value to make it possible to eventually change the function to return void. Also the driver core ignores the return value of sun4i_pwm_remove() and considers the device removed anyhow. So returning early results in a resource leak. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-05-25pwm: Simplify all drivers with explicit of_pwm_n_cells = 3Uwe Kleine-König
With the previous commit there is no need for the lowlevel driver any more to specify it it uses two or three cells. So simplify accordingly. The only non-trival change affects the pwm-rockchip driver: It used to only support three cells if the hardware supports polarity. Now the default number depends on the device tree which has to match hardware anyhow (and if it doesn't the error is just a bit delayed as a PWM handle with an inverted setting is catched when pwm_apply_state() is called). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22pwm: Always allocate PWM chip base ID dynamicallyUwe Kleine-König
Since commit 5e5da1e9fbee ("pwm: ab8500: Explicitly allocate pwm chip base dynamically") all drivers use dynamic ID allocation explicitly. New drivers are supposed to do the same, so remove support for driver specified base IDs and drop all assignments in the low-level drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: sun4i: Remove erroneous else branchThierry Reding
Commit d3817a647059 ("pwm: sun4i: Remove redundant needs_delay") changed the logic of an else branch so that the PWM_EN and PWM_CLK_GATING bits are now cleared if the PWM is to be disabled, whereas previously the condition was always false, and hence the branch never got executed. This code is reported causing backlight issues on boards based on the Allwinner A20 SoC. Fix this by removing the else branch, which restores the behaviour prior to the offending commit. Note that the PWM_EN and PWM_CLK_GATING bits still get cleared later in sun4i_pwm_apply() if the PWM is to be disabled. Fixes: d3817a647059 ("pwm: sun4i: Remove redundant needs_delay") Reported-by: Taras Galchenko <tpgalchenko@gmail.com> Suggested-by: Taras Galchenko <tpgalchenko@gmail.com> Tested-by: Taras Galchenko <tpgalchenko@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: sun4i: Convert to devm_platform_ioremap_resource()Yangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: sun4i: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-17pwm: sun4i: Use nsecs_to_jiffies to avoid a divisionGuru Das Srinagesh
Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using nsecs_to_jiffies() which does away with the need for a division operation. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-02pwm: sun4i: Support direct clock output on Allwinner A64Peter Vasil
Allwinner A64 is capable of a direct clock output on PWM (see A64 User Manual chapter 3.10). Add support for this in the sun4i PWM driver. Signed-off-by: Peter Vasil <peter.vasil@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: sun4i: Remove redundant needs_delayPascal Roeleven
'needs_delay' does now always evaluate to true, so remove all occurrences. Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Initialize variables before useThierry Reding
GCC can't always determine that the duty, period and prescaler values are initialized when returning from sun4i_pwm_calculate(), so help out a little by initializing them to 0. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Narrow scope of local variableUwe Kleine-König
The variable pval is only used in a single block in the function sun4i_pwm_calculate(). So declare it in a more local scope to simplify the function for humans and compilers. While at it also simplify assignment to pval. While the diffstat for this patch is negative for this patch I still thing the advantage of having a narrower scope is beneficial. In my compiler / .config setup (gcc 8.2.1, arm/imx_v6_v7_defconfig + COMPILE_TEST + PWM_SUN4I) this change doesn't result in any binary changes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in sun4i_pwm_probe(). The proper pointers to be passed as arguments are pwm->clk and pwm->bus_clk. This bug was detected with the help of Coccinelle. Fixes: b8d74644f34a ("pwm: sun4i: Prefer "mod" clock to unnamed") Fixes: 5b090b430d75 ("pwm: sun4i: Add an optional probe for bus clock") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Move pwm_calculate() out of spin_lock()Clément Péron
pwm_calculate() calls clk_get_rate() while holding a spin_lock(). This create an issue as clk_get_rate() may sleep. Move pwm_calculate() out of this spin_lock(). Fixes: c32c5c50d4fe ("pwm: sun4i: Switch to atomic PWM") Reported-by: Alexander Finger <alex.mobigo@gmail.com> Sugested-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Alexander Finger <alex.mobigo@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add support for H6 PWMJernej Skrabec
Now that sun4i PWM driver supports deasserting reset line and enabling bus clock, support for H6 PWM can be added. Note that while H6 PWM has two channels, only first one is wired to output pin. Second channel is used as a clock source to companion AC200 chip which is bundled into same package. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add support to output source clock directlyJernej Skrabec
PWM core has an option to bypass whole logic and output unchanged source clock as PWM output. This is achieved by enabling bypass bit. Note that when bypass is enabled, no other setting has any meaning, not even enable bit. This mode of operation is needed to achieve high enough frequency to serve as clock source for AC200 chip which is integrated into same package as H6 SoC. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Always calculate params when applying new parametersClément Péron
Bypass mode will require to be re-calculated when the pwm state is changed. Remove the condition so pwm_sun4i_calculate is always called. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add an optional probe for bus clockJernej Skrabec
H6 PWM core needs bus clock to be enabled in order to work. Add an optional probe for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Prefer "mod" clock to unnamedClément Péron
New device tree bindings called the source clock of the module "mod" when several clocks are defined. Try to get a clock called "mod" if nothing is found try to get an unnamed clock. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add an optional probe for reset lineJernej Skrabec
H6 PWM core needs deasserted reset line in order to work. Add an optional probe for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: sun4i: Fix incorrect calculation of duty_cycle/periodOndrej Jirman
Since 5.4-rc1, pwm_apply_state calls ->get_state after ->apply if available, and this revealed an issue with integer precision when calculating duty_cycle and period for the currently set state in ->get_state callback. This issue manifested in broken backlight on several Allwinner based devices. Previously this worked, because ->apply updated the passed state directly. Fixes: deb9c462f4e53 ("pwm: sun4i: Don't update the state for the caller of pwm_apply_state") Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-10-21pwm: sun4i: Drop redundant assignment to variable pvalColin Ian King
Variable pval is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: Ensure pwm_apply_state() doesn't modify the state argumentUwe Kleine-König
It is surprising for a PWM consumer when the variable holding the requested state is modified by pwm_apply_state(). Consider for example a driver doing: #define PERIOD 5000000 #define DUTY_LITTLE 10 ... struct pwm_state state = { .period = PERIOD, .duty_cycle = DUTY_LITTLE, .polarity = PWM_POLARITY_NORMAL, .enabled = true, }; pwm_apply_state(mypwm, &state); ... state.duty_cycle = PERIOD / 2; pwm_apply_state(mypwm, &state); For sure the second call to pwm_apply_state() should still have state.period = PERIOD and not something the hardware driver chose for a reason that doesn't necessarily apply to the second call. So declare the state argument as a pointer to a const type and adapt all drivers' .apply callbacks. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: sun4i: Don't update the state for the caller of pwm_apply_state()Uwe Kleine-König
The pwm-sun4i driver is one of only three PWM drivers which updates the state for the caller of pwm_apply_state(). This might have surprising results if the caller reuses the values expecting them to still represent the same state. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 191Thomas Gleixner
Based on 1 normalized pattern(s): licensed under gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 99 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28pwm: sun4i: Simplify controller mappingAndre Przywara
At the moment we assign our supported compatible strings to a respective instance of our sun4i_pwm_data structure, even though some of them are the same. To avoid further clutter, split out the three different combinations of features we have at the moment and name them accordingly. This should make it more obvious which compatible string to use for new SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sun4i: Drop unused .has_rdy memberAndre Przywara
Commit a054c4d68408 ("pwm: sun4i: Drop legacy callbacks") dropped the only user of the .has_rdy member in our sun4i_pwm_data struct. Consequently we don't need to store this anymore for the various SoCs, which paves the way for further simplifications. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sun4i: Properly check current stateAlexandre Belloni
Correctly extract the prescaler value from CTRL_REG before comparing it to PWM_PRESCAL_MASK. Also, check that both PWM_CLK_GATING and PWM_EN to ensure the PWM is enabled instead of relying on only one of those. Fixes: 93e0dfb2c52f ("pwm: sun4i: Improve hardware read out") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-11-15pwm: sunxi: Use of_device_get_match_data()Corentin Labbe
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() returns NULL. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-07-06pwm: sun4i: Drop legacy callbacksAlexandre Belloni
Remove the legacy callbacks .enable(), .disable(), .set_polarity() and .config(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-07-06pwm: sun4i: Switch to atomic PWMAlexandre Belloni
Switch the driver to atomic PWM. This makes it easier to wait a proper amount of time when changing the duty cycle before disabling the channel (main use case is switching the duty cycle to 0 before disabling). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-07-06pwm: sun4i: Improve hardware read outAlexandre Belloni
Implement .get_state instead of only reading the polarity at probe time. This allows to get the proper state, period and duty cycle. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-04pwm: Remove .can_sleep from struct pwm_chipThierry Reding
All PWM devices have been marked as "might sleep" since v4.5, there is no longer a need to differentiate on a per-chip basis. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-09-08pwm: sunxi: Add H3 supportMilo Kim
H3 PWM controller has same register layout as sun4i driver, so it works by adding H3 specific data. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-pwm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Use pwm_get/set_xxx() helpers where appropriateBoris Brezillon
Use pwm_get/set_xxx() helpers instead of directly accessing the pwm->xxx field. Doing that will ease adaptation of the PWM framework to support atomic update. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10pwm: sunxi: Fix whitespace issueOlliver Schinagl
This patch changes no code, it just fixes the whitespacing. Operators should be separated from operands by a single space. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10pwm: sun4i: Add support for PWM controller on sun5i SoCsHans de Goede
The PWM controller on sun5i SoCs is identical to the one found on sun7i SoCs. On the A13 package only one of the 2 pins is routed to the outside, so only advertise one PWM channel there. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-30pwm: Add Allwinner SoC supportAlexandre Belloni
This adds a generic PWM framework driver for the PWM controller found on Allwinner SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit (git 2.34.1) at 2024-06-04 19:09:36 +0000