summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2019-07-09Merge tag 'pwm/for-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains a new driver for SiFive SoCs as well as enhancements to the core (device links are used to track dependencies between PWM providers and consumers, support for PWM controllers via ACPI, sysfs will now suspend/resume PWMs that it has claimed) and various existing drivers" * tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: fsl-ftm: Make sure to unlock mutex on failure pwm: fsl-ftm: Use write protection for prescaler & polarity pwm: fsl-ftm: More relaxed permissions for updating period pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM pwm: bcm2835: Improve precision of PWM leds: pwm: Support ACPI via firmware-node framework pwm: Add support referencing PWMs from ACPI pwm: rcar: Remove suspend/resume support pwm: sysfs: Add suspend/resume support pwm: Add power management descriptions pwm: meson: Add documentation to the driver pwm: meson: Add support PWM_POLARITY_INVERSED when disabling pwm: meson: Don't cache struct pwm_state internally pwm: meson: Read the full hardware state in meson_pwm_get_state() pwm: meson: Simplify the calculation of the pre-divider and count pwm: meson: Move pwm_set_chip_data() to meson_pwm_request() pwm: meson: Add the per-channel register offsets and bits in a struct pwm: meson: Add the meson_pwm_channel data to struct meson_pwm pwm: meson: Pass struct pwm_device to meson_pwm_calc() pwm: meson: Don't duplicate the polarity internally ...
2019-06-26pwm: fsl-ftm: Make sure to unlock mutex on failureThierry Reding
Upon failure to enable clocks while trying to enable the PWM, make sure to unlock the mutex that was taken to avoid a deadlock during subsequent operations. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Cc: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: fsl-ftm: Use write protection for prescaler & polarityPatrick Havelange
Modifying the prescaler or polarity value must be done with the write protection disabled. Currently this is working by chance as the write protection is in a disabled state by default. This patch makes sure that we enable/disable the write protection when needed. Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: fsl-ftm: More relaxed permissions for updating periodPatrick Havelange
The Flextimer has only one period for several channels. The PWM subsystem doesn't allow to model something like that. The current implementation simply disallows changing the period once it has been set, having as a side effect that you need to enable and disable the PWM if you want to change the period. The driver should allow as much freedom as possible for configuring the period and duty cycle. Therefore, this patch reworks the code to allow the following: - period and duty_cycle can be set at will when the PWM is disabled; - when enabling a PWM, verify that the period is either not set yet, or the same as the other already enabled PWM(s), and fail if not; - allow to change the period on the fly when the PWM is the only one enabled. It also allows to have different periods configured for different PWMs. Only one period can be used at a time, thus the first PWM to be enabled will set that period, only other PWMs with that same period can be enabled at the same time. To use another PWM with another period, the enabled PWMs must be disabled first. Example scenario : echo 5000000 > pwm0/period #OK echo 1000000 > pwm0/duty_cycle #OK echo 1000000 > pwm1/period #OK echo 1000000 > pwm1/duty_cycle #OK echo 1 > pwm0/enable #OK echo 1 > pwm1/enable #FAIL (pwm0/period != pwm1/period) echo 0 > pwm0/enable #OK echo 1 > pwm1/enable #OK echo 1000000 > pwm0/period #OK echo 2000000 > pwm0/period #OK echo 1 > pwm0/enable #FAIL (pwm0/period != pwm1/period) echo 2000000 > pwm1/period #OK (pwm1 still running, changed on the fly) echo 1 > pwm0/enable #OK (now pwm0/period == pwm1/period) echo 3000000 > pwm1/period #FAIL (other PWMs running) echo 0 > pwm0/enable #OK echo 3000000 > pwm1/period #OK (only this PWM running) Adapting the code to satisfy these constraints turned up a number of additional issues with the current implementation: - the prescaler value 0 was not used (when it could have been); - when setting the period was not possible, the internal state was inconsistent; - the maximal value for configuring the period was never used; Since all of these interact with each other, rather than trying to fix each individual issue, this patch reworks how the period and duty cycle are set entirely, with the following additional improvements: - implement the new apply() method instead of the individual methods; - return the exact used period/duty_cycle values; - more coherent argument types for period, duty_cycle; Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWMClaudiu Beznea
Add compatible string for SAM9X60 HLCDC's PWM. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: bcm2835: Improve precision of PWMSean Young
If sending IR with carrier of 455kHz using the pwm-ir-tx driver, the carrier ends up being 476kHz. The clock is set to bcm2835-pwm with a rate of 10MHz. A carrier of 455kHz has a period of 2198ns, but the arithmetic truncates this to 2100ns rather than 2200ns. So, use DIV_ROUND_CLOSEST() to reduce rounding errors, and we have a much more accurate carrier of 454.5kHz. Reported-by: Andreas Christ <andreas@christ-faesch.ch> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: Add support referencing PWMs from ACPINikolaus Voss
In analogy to referencing a GPIO using the "gpios" property from ACPI, support referencing a PWM using the "pwms" property. ACPI entries must look like Package () {"pwms", Package () { <PWM device reference>, <PWM index>, <PWM period> [, <PWM flags>]}} In contrast to the DT implementation, only _one_ PWM entry in the "pwms" property is supported. As a consequence "pwm-names"-property and con_id lookup aren't supported. Support for ACPI is added via the firmware-node framework which is an abstraction layer on top of ACPI/DT. To keep this patch clean, DT and ACPI paths are kept separate. The firmware-node framework could be used to unify both paths in a future patch. To support leds-pwm driver, an additional method devm_fwnode_pwm_get() which supports both ACPI and DT configuration is exported. Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> [thierry.reding@gmail.com: fix build failures for !ACPI] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: rcar: Remove suspend/resume supportYoshihiro Shimoda
According to the Documentation/pwm.txt, all PWM consumers should implement power management instead of the PWM driver. So, this patch removes suspend/resume support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: sysfs: Add suspend/resume supportYoshihiro Shimoda
According to the Documentation/pwm.txt, all PWM consumers should have power management. Since this sysfs interface is one of consumers so that this patch adds suspend/resume support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [thierry.reding@gmail.com: fix build warnings for !PM] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Add documentation to the driverMartin Blumenstingl
Add links to the datasheet and a short summary how the hardware works. The goal is to make it easier for other developers to understand why the pwm-meson driver is implemented the way it is. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Co-authored-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Add support PWM_POLARITY_INVERSED when disablingMartin Blumenstingl
meson_pwm_apply() has to consider the PWM polarity when disabling the output. With enabled=false and polarity=PWM_POLARITY_NORMAL the output needs to be LOW. The driver already supports this. With enabled=false and polarity=PWM_POLARITY_INVERSED the output needs to be HIGH. Implement this in the driver by internally enabling the output with the same settings that we already use for "period == duty". This fixes a PWM API violation which expects that the driver honors the polarity also for enabled=false. Due to the IP block not supporting this natively we only get "an as close as possible" to 100% HIGH signal (in my test setup with input clock of 24MHz and measuring the output with a logic analyzer at 24MHz sampling rate I got a duty cycle of 99.998475% on a Khadas VIM). Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Don't cache struct pwm_state internallyMartin Blumenstingl
The PWM core already caches the "current struct pwm_state" as the "current state of the hardware registers" inside struct pwm_device. Drop the struct pwm_state from struct meson_pwm_channel in favour of the struct pwm_state in struct pwm_device. While here also drop any checks based on the pwm_state because the PWM core already takes care of this. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Read the full hardware state in meson_pwm_get_state()Martin Blumenstingl
Update the meson_pwm_get_state() implementation to take care of all information in the registers instead of only reading the "enabled" state. The PWM output is only enabled if two conditions are met: 1. the per-channel clock is enabled 2. the PWM output is enabled Calculate the PWM period and duty cycle using the reverse formula which we already have in meson_pwm_calc() and update struct pwm_state with the results. As result of this /sys/kernel/debug/pwm now shows the PWM state set by the bootloader (or firmware) after booting Linux. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Simplify the calculation of the pre-divider and countMartin Blumenstingl
Replace the loop to calculate the pre-divider and count with two separate div64_u64() calculations. This makes the code easier to read and improves the precision. Three example cases: 1) 32.768kHz LPO clock for the SDIO wifi chip on Khadas VIM clock input: 500MHz (FCLK_DIV4) period: 30518ns duty cycle: 15259ns old algorithm: pre_div=0, cnt=15259 new algorithm: pre_div=0, cnt=15259 (no difference in calculated values) 2) PWM LED on Khadas VIM clock input: 24MHz (XTAL) period: 7812500ns duty cycle: 7812500ns old algorithm: pre_div=2, cnt=62004 new algorithm: pre_div=2, cnt=62500 Using a scope (24MHz sampling rate) shows the actual difference: - old: 7753000ns, off by -59500ns (0.7616%) - new: 7815000ns, off by +2500ns (0.032%) 3) Theoretical case where pre_div is different clock input: 24MHz (XTAL) period: 2730624ns duty cycle: 1365312ns old algorithm: pre_div=1, cnt=32768 new algorithm: pre_div=0, cnt=65534 Using a scope (24MHz sampling rate) shows the actual difference: - old: 2731000ns - new: 2731000ns (my scope is not precise enough to measure the difference if there's any) Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Move pwm_set_chip_data() to meson_pwm_request()Martin Blumenstingl
All existing PWM drivers (except pwm-meson and two other ones) call pwm_set_chip_data() from their pwm_ops.request() callback. Now that we can access the struct meson_pwm_channel from struct meson_pwm we can do the same. Move the call to pwm_set_chip_data() to meson_pwm_request() and drop the custom meson_pwm_add_channels(). This makes the implementation consistent with other drivers and makes it slightly more obvious thatpwm_get_chip_data() cannot be used from pwm_ops.get_state() (because that's called by the PWM core before pwm_ops.request()). No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Add the per-channel register offsets and bits in a structMartin Blumenstingl
Introduce struct meson_pwm_channel_data which contains the per-channel offsets for the PWM register and REG_MISC_AB bits. Replace the existing switch (pwm->hwpwm) statements with an access to the new struct. This simplifies the code and will make it easier to implement pwm_ops.get_state() because the switch-case which all per-channel registers and offsets (as previously implemented in meson_pwm_enable()) doesn't have to be duplicated. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Add the meson_pwm_channel data to struct meson_pwmMartin Blumenstingl
Make struct meson_pwm_channel accessible from struct meson_pwm. PWM core has a limitation: per-channel data can only be set after pwmchip_add() is called. However, pwmchip_add() internally calls pwm_ops.get_state(). If pwm_ops.get_state() needs access to the per-channel data it has to obtain it from struct pwm_chip and struct pwm_device's hwpwm information. Add a struct meson_pwm_channel for each PWM channel to struct meson_pwm so the pwm_ops.get_state() callback can be implemented as it needs access to the clock from struct meson_pwm_channel. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Pass struct pwm_device to meson_pwm_calc()Martin Blumenstingl
meson_pwm_calc() is the last function that accepts a struct meson_pwm_channel. meson_pwm_enable(), meson_pwm_disable() and meson_pwm_apply() for example are all taking a struct pwm_device as parameter. When they need the struct meson_pwm_channel these functions simply call pwm_get_chip_data() internally. Make meson_pwm_calc() consistent with the other functions in the meson-pwm driver by passing struct pwm_device to it as well. The value of the "id" parameter is actually pwm->hwpwm, but the driver never read the "id" parameter, which is why there's no replacement for it in the new code. No functional changes. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Don't duplicate the polarity internallyMartin Blumenstingl
Let meson_pwm_calc() use the polarity from struct pwm_state directly. This removes a level of indirection where meson_pwm_apply() first had to set a driver-internal inverter mask which was then only used by meson_pwm_calc(). Instead of adding the polarity as parameter to meson_pwm_calc() switch to struct pwm_state directly to make it easier to see where the parameters are actually coming from. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Change MISC_CLK_SEL_WIDTH to MISC_CLK_SEL_MASKMartin Blumenstingl
MISC_CLK_SEL_WIDTH is only used in one place where it's converted into a bit-mask. Rename and change the macro to be a bit-mask so that conversion is not needed anymore. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Use GENMASK and FIELD_PREP for the lo and hi valuesMartin Blumenstingl
meson_pwm_calc() ensures that "lo" is always less than 16 bits wide (otherwise it would overflow into the "hi" part of the REG_PWM_{A,B} register). Use GENMASK and FIELD_PREP for the lo and hi values to make it easier to spot how wide these are internally. Additionally this is a preparation step for the .get_state() implementation where the GENMASK() for lo and hi becomes handy because it can be used with FIELD_GET() to extract the values from the register REG_PWM_{A,B} register. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Use devm_clk_get_optional() to get the input clockMartin Blumenstingl
Simplify the code which fetches the input clock for a PWM channel by using devm_clk_get_optional(). This comes with a small functional change: previously all errors except EPROBE_DEFER were ignored. Now all other errors are also treated as errors. If no input clock is present devm_clk_get_optional() will return NULL instead of an error which matches the behavior of the old code. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Unify the parameter list of meson_pwm_{enable, disable}Martin Blumenstingl
This is a preparation for a future cleanup. Pass struct pwm_device instead of passing the individual values required by each function as these can be obtained for each struct pwm_device instance. As a nice side-effect the driver now uses "switch (pwm->hwpwm)" everywhere. Before some functions used "switch (id)" while others used "switch (pwm->hwpwm)". No functional changes. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: jz4740: Force TCU2 channels to return to their init levelPaul Cercueil
When the PWM mode of TCU2 channels is disabled, their corresponding pin does not always return to its initial level. Force this by using a small trick: we set duty > period, which is an invalid configuration for the hardware, which then correctly resets the pin to the initial level. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: jz4740: Apply configuration atomicallyPaul Cercueil
This is cleaner, more future-proof, and incidentally it also fixes the PWM resetting its config when stopped/started several times. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: jz4740: Remove unused devicetree compatible stringsPaul Cercueil
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Fix the G12A AO clock parents orderNeil Armstrong
The Amlogic G12A and G12B Documentation is wrong, the AO xtal and clk81 clock source order is reversed, and validated when adding DVFS support by using the PWM AO D output to control the CPU supply voltage. The vendor tree also uses the reversed xtal and clk81 order at [1]. [1] https://github.com/hardkernel/linux/blob/odroidn2-4.9.y/drivers/amlogic/pwm/pwm_meson.c#L462 Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Update with SPDX Licence identifierNeil Armstrong
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32: Use 3 cells ->of_xlate()Fabrice Gasnier
STM32 Timers support generic 3 cells PWM to encode PWM number, period and polarity. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: Add consumer device linkFabrice Gasnier
Add a device link between the PWM consumer and the PWM provider. This enforces the PWM user to get suspended before the PWM provider. It allows proper synchronization of suspend/resume sequences: the PWM user is responsible for properly stopping PWM, before the provider gets suspended: see [1]. Add the device link in: - of_pwm_get() - pwm_get() - devm_*pwm_get() variants as it requires a reference to the device for the PWM consumer. [1] https://lkml.org/lkml/2019/2/5/770 Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32-lp: Add power management supportFabrice Gasnier
Add suspend/resume PM sleep ops. When going to low power, enforce the PWM channel isn't active. Let the PWM consumers disable it during their own suspend sequence. Only perform a check here, and handle the pinctrl states. See [1]. [1] https://lkml.org/lkml/2019/2/5/770 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: sifive: Add a driver for SiFive SoC PWMYash Shah
Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC. Signed-off-by: Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194Thomas Gleixner
Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 191Thomas Gleixner
Based on 1 normalized pattern(s): licensed under gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 99 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 151Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.655028468@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer