summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2016-08-06Merge tag 'pwm/for-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ...
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-07-25Merge branch 'for-4.8/drivers' into for-nextThierry Reding
2016-07-25Merge branch 'for-4.8/capture' into for-nextThierry Reding
2016-07-25pwm: Add ChromeOS EC PWM driverBrian Norris
Use the new ChromeOS EC EC_CMD_PWM_{GET,SET}_DUTY commands to control one or more PWMs attached to the Embedded Controller. Because the EC allows us to modify the duty cycle (as a percentage, where U16_MAX is 100%) but not the period, we assign the period a fixed value of EC_PWM_MAX_DUTY and reject all attempts to change it. This driver supports only device tree at the moment, because that provides a very flexible way of describing the relationship between PWMs and their consumer devices (e.g., backlight). On a non-DT system, we'll probably want to use the non-GENERIC addressing (i.e., we'll need to make special device instances that will use EC_PWM_TYPE_KB_LIGHT or EC_PWM_TYPE_DISPLAY_LIGHT), as well as the relatively inflexible pwm_lookup infrastructure for matching devices. Defer that work for now. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: atmel: Use of_device_get_match_data()Thierry Reding
Use of_device_get_match_data() instead of an open-coded variant. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: atmel: Fix checkpatch warningsThierry Reding
Avoid an overly long line by moving a comment around, and remove a use of else-after-return. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: atmel: Fix disabling of PWM channelsGuillermo Rodriguez
When disabling a PWM channel, the PWM clock was being stopped immediately after writing to PWM_DIS. As a result, the disabling of the PWM channel did not complete properly, and the PWM output might be left at the wrong level. Fix this by waiting for the channel to be effectively disabled (by checking the PWM_SR register) before disabling the clock. Signed-off-by: Guillermo Rodriguez <guille.rodriguez@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: rcar: Use ARCH_RENESASRyo Kodama
Replace ARCH_RCAR_GEN{1,2} with ARCH_RENESAS in order to support R-Car Gen3. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Add support for Tegra186Laxman Dewangan
Tegra186 has multiple PWM controllers with only one output instead of one controller with four outputs in earlier SoC generations. Add support for Tegra186 and detect the number of PWM outputs using device tree match data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Avoid overflow when calculating duty cycleHyong Bin Kim
duty_ns * (1 << PWM_DUTY_WIDTH) could overflow in integer calculation when the PWM rate is low. Hence do all calculation on unsigned long long to avoid overflow. Signed-off-by: Hyong Bin Kim <hyongbink@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Allow 100 % duty cycleVictor(Weiguo) Pan
To get 100 % duty cycle (always high), pulse width needs to be set to 256. Signed-off-by: Victor(Weiguo) Pan <wpan@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Add support for reset controlRohith Seelaboyina
Add reset control of the PWM controller to reset it before accessing the PWM register. Signed-off-by: Rohith Seelaboyina <rseelaboyina@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Rename mmio_base to regsThierry Reding
The former is much longer to type and is ambiguous because the value stored in the field is not the (physical) base address of the memory- mapped I/O registers, but the virtual address of those registers as mapped through the MMU. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Remove useless paddingThierry Reding
Use single spaces to separate data type from field names in structure definitions. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: tegra: Drop NUM_PWM macroThierry Reding
This macro is used to initialize the ->npwm field of the PWM chip. Use a literal instead and make all other places rely on ->npwm. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default valueSylvain Lemieux
The PWM_PIN_LEVEL bit is leave unset by the kernel PWM driver. Prior to commit 08ee77b5a5de27ad63c92262ebcb4efe0da93b58, the PWM_PIN_LEVEL bit was always clear when the PWM was disable and a 0 logic level was apply to the output. According to the LPC32x0 User Manual [1], the default value for bit 30 (PWM_PIN_LEVEL) is 0. This change initialize the pin level to 0 (default value) and update the register value accordingly. [1] http://www.nxp.com/documents/user_manual/UM10326.pdf Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: Add a driver for the STMPE PWMLinus Walleij
This adds a driver for the PWM block found in chips of the STMPE 24xx series of multi-purpose I2C expanders. (I think STMPE means ST Microelectronics Multi-Purpose Expander.) This PWM was designed in accordance with Nokia specifications and is kind of weird and usually just switched between max and zero duty cycle. However it is indeed a PWM so it needs to live in the PWM subsystem. This PWM is mostly used for white LED backlight. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: rockchip: Add support for atomic updateBoris Brezillon
Implement the ->apply() function to add support for atomic update. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: rockchip: Avoid glitches on already running PWMsBoris Brezillon
The current logic will disable the PWM clk even if the PWM was left enabled by the bootloader (because it's controlling a critical device like a regulator for example). Keep the PWM clk enabled if the PWM is enabled to avoid any glitches. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: rockchip: Add support for hardware readoutBoris Brezillon
Implement the ->get_state() function to expose initial state. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: rockchip: Fix period and duty cycle approximationBoris Brezillon
The current implementation always round down the duty and period values, while it would be better to round them to the closest integer. These changes are needed in preparation of atomic update support to prevent a period/duty cycle drift when executing several times the 'pwm_get_state() / modify / pwm_apply_state()' sequence. Say you have an expected period of 3.333 us and a clk rate of 112.666667 MHz -- the clock frequency doesn't divide evenly, so the period (stashed in nanoseconds) shrinks when we convert to the register value and back, as follows: pwm_apply_state(): register = period * 112666667 / 1000000000; pwm_get_state(): period = register * 1000000000 / 112666667; or in other words: period = period * 112666667 / 1000000000 * 1000000000 / 112666667; which yields a sequence like: 3333 -> 3328 3328 -> 3319 3319 -> 3310 3310 -> 3301 3301 -> 3292 3292 -> ... (etc) ... With this patch, we'd see instead: period = div_round_closest(period * 112666667, 1000000000) * 1000000000 / 112666667; which yields a stable sequence: 3333 -> 3337 3337 -> 3337 3337 -> ... (etc) ... Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: Add support for Broadcom iProc PWM controllerYendapally Reddy Dhananjaya Reddy
Add support for the PWM controller present in Broadcom's iProc family of SoCs. It has been tested on the Northstar+ bcm958625HR board. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> [thierry.reding@gmail.com: bunch of coding style fixes, cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: lpss: Move clk_rate check to ->probe()Andy Shevchenko
There is no need to check each time if the clk_rate defined or not when we call pwm_lpss_config(). Move the check to ->probe() instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: lpss: pci: Enable PWM module on Intel EdisonAndy Shevchenko
Intel Edison has 4 PWM channels on the die with the same IP as in Broxton. Enable it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: lpss: Prevent on_time_div overflow on lower frequenciesMika Westerberg
If duty_ns is large enough multiplying it by 255 overflows and results wrong duty cycle value being programmed. For example with 10ms duty when period is 20ms (50%) we get 255 * 10000000 / 20000000 = -87 because 255 * 10000000 overlows int. Whereas correct value should be 255 * 10000000 / 20000000 = 127 Fix this by using unsigned long long as type for on_time_div and changing integer literals to use proper type annotation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: lpss: Fix base_unit calculation for PWM frequencyDan O'Donovan
The base_unit calculation applies an offset of 0x2 which adds significant error for lower frequencies and doesn't appear to be warranted - rounding the division result gives a correct value. Also, the upper limit check for base_unit is off-by-one; the upper nibble of base_unit is invalid if >=128 according to the Table 88 in the Z8000 Processor Series Datasheet Volume 1 (Rev. 2). Verified on UP Board (Cherry Trail) and Minnowboard Max (Bay Trail). Signed-off-by: Dan O'Donovan <dan@emutex.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-11pwm: pwm-ti*: Remove support for local clock gatingCooper Jr., Franklin
The PWMSS local clock gating registers have no real purpose on OMAP ARM devices. These registers were left over registers from DSP IP where the PRCM doesn't exist. There is a silicon bug where gating and ungating clocks don't function properly. TRMs will be update to indicate that these registers shouldn't be touched. Therefore, all code that accesses the PWMSS_CLKCONFIG or PWMSS_CLKSTATUS will be removed by this patch with zero loss of functionality by the ECAP and EPWM drivers. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-08pwm: pwm-ti*: Get the clock from the PWMSS parent when using old bindingsCooper Jr., Franklin
When using the old eCAP and ePWM bindings for AM335x and AM437x the clock can be retrieved from the PWMSS parent. Newer bindings will insure that this clock is provided via device tree. Therefore, update this driver to support the newer and older bindings. In the case of the older binding being used give a warning. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> [thierry.reding@gmail.com: rewrite slightly for readability] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-07Merge tag 'omap-for-v4.8/ir-rx51-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers Merge "omap ir-rx51 driver fixes for multiarch for v4.8 merge window" from Tony Lindgren: Fix a long time regression for ir-rx51 driver for n900 device tree booting. This driver has been unusable with multiarch because of the hardware timer access. With the recent PWM changes, we can finally fix the driver for multiarch and device tree support. And naturally there is no rush for these for the -rc cycle, these can wait for the merge window. The PWM changes have been acked by Thierry. For the media changes I did not get an ack from Mauro but he was Cc'd in the discussion and these changes do not conflict with other media changes. After this series we can drop the remaining omap3 legacy booting board files finally. * tag 'omap-for-v4.8/ir-rx51-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ir-rx51: use hrtimer instead of dmtimer ir-rx51: add DT support to driver ir-rx51: use PWM framework instead of OMAP dmtimer pwm: omap-dmtimer: Allow for setting dmtimer clock source ir-rx51: Fix build after multiarch changes broke it
2016-07-06pwm: clps711x: Changing the compatibility string to match with the smallest ↵Alexander Shiyan
supported chip This patch changes the compatibility string to match with the smallest supported chip (EP7209). Since the DT-support for this CPU is not yet announced, this change is safe. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-29pwm: omap-dmtimer: Allow for setting dmtimer clock sourceIvaylo Dimitrov
OMAP GP timers can have different input clocks that allow different PWM frequencies. However, there is no other way of setting the clock source but through clocks or clock-names properties of the timer itself. This limits PWM functionality to only the frequencies allowed by the particular clock source. Allowing setting the clock source by PWM rather than by timer allows different PWMs to have different ranges by not hard-wiring the clock source to the timer. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-14pwm: atmel-hlcdc: Fix default PWM polarityBoris Brezillon
The PWM device exposed by the HLCDC IP is configured with an inverted polarity by default. Registering the PWM chip with the normal polarity was not a problem before commit 42e8992c58d4 ("pwm: Add core infrastructure to allow atomic updates") because the ->set_polarity() hook was called no matter the current polarity state, but this is no longer the case. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: sysfs: Add PWM capture supportLee Jones
Allow a user to read PWM capture results from sysfs. To start a capture and read the result, simply read the file: $ cat $PWMCHIP/capture The output format is "<period> <duty cycle>". Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: Add PWM capture supportLee Jones
Supply a PWM capture callback op in order to pass back information obtained by running analysis on a PWM signal. This would normally (at least during testing) be called from the sysfs routines with a view to printing out PWM capture data which has been encoded into a string. Signed-off-by: Lee Jones <lee.jones@linaro.org> [thierry.reding@gmail.com: make capture data unsigned int for symmetry] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: sysfs: Get return value from pwm_apply_state()Ryo Kodama
This patch adds to check the return value from pwm_apply_state() used in enable_store(). The error of enable_store() doesn't work if the return value doesn't received. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 39100ceea79f ("pwm: Switch to the atomic API") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: Improve args checking in pwm_apply_state()Brian Norris
It seems like in the process of refactoring pwm_config() to utilize the newly-introduced pwm_apply_state() API, some args/bounds checking was dropped. In particular, I noted that we are now allowing invalid period selections, e.g.: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle [... driver may or may not reject the value, or trigger some logic bug ...] It's better to see: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle -bash: echo: write error: Invalid argument This patch reintroduces some bounds checks in both pwm_config() (for its signed parameters; we don't want to convert negative values into large unsigned values) and in pwm_apply_state() (which fix the above described behavior, as well as other potential API misuses). Fixes: 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-25Merge tag 'pwm/for-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes introduces an atomic API to the PWM subsystem. This is influenced by the DRM atomic API that was introduced a while back, though it is obviously a lot simpler. The fundamental idea remains the same, though: drivers provide a single callback to implement the atomic configuration of a PWM channel. As a side-effect the PWM subsystem gains the ability for initial state retrieval, so that the logical state mirrors that of the hardware. Many use-cases don't care about this, but for others it is essential. These new features require changes in all users, which these patches take care of. The core is transitioned to use the atomic callback if available and provides a fallback mechanism for other drivers. Changes to transition users and drivers to the atomic API are postponed to v4.8" * tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) pwm: Add information about polarity, duty cycle and period to debugfs pwm: Switch to the atomic API pwm: Update documentation pwm: Add core infrastructure to allow atomic updates pwm: Add hardware readout infrastructure pwm: Move the enabled/disabled info into pwm_state pwm: Introduce the pwm_state concept pwm: Keep PWM state in sync with hardware state ARM: Explicitly apply PWM config extracted from pwm_args drm: i915: Explicitly apply PWM config extracted from pwm_args input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args input: misc: max8997: Explicitly apply PWM config extracted from pwm_args backlight: lm3630a: explicitly apply PWM config extracted from pwm_args backlight: lp855x: Explicitly apply PWM config extracted from pwm_args backlight: lp8788: Explicitly apply PWM config extracted from pwm_args backlight: pwm_bl: Use pwm_get_args() where appropriate fbdev: ssd1307fb: Use pwm_get_args() where appropriate regulator: pwm: Use pwm_get_args() where appropriate leds: pwm: Use pwm_get_args() where appropriate input: misc: max77693: Use pwm_get_args() where appropriate ...
2016-05-17Merge branch 'for-4.7/pwm-atomic' into for-nextThierry Reding
2016-05-17Merge branch 'for-4.7/pwm-args' into for-nextThierry Reding
2016-05-17pwm: Add information about polarity, duty cycle and period to debugfsHeiko Stübner
The PWM states make it possible to also output the polarity, duty cycle and period information in the debugfs summary output. This simplifies gathering information about PWMs without needing to walk through the sysfs attributes of every PWM. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [thierry.reding@gmail.com: use more spaces in debugfs output] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Switch to the atomic APIBoris Brezillon
Replace legacy pwm_get/set_xxx() and pwm_config/enable/disable() calls by pwm_get/apply_state(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Add core infrastructure to allow atomic updatesBoris Brezillon
Add an ->apply() method to the pwm_ops struct to allow PWM drivers to implement atomic updates. This method is preferred over the ->enable(), ->disable() and ->config() methods if available. Add the pwm_apply_state() function to the PWM user API. Note that the pwm_apply_state() does not guarantee the atomicity of the update operation, it all depends on the availability and implementation of the ->apply() method. pwm_enable/disable/set_polarity/config() are now implemented as wrappers around the pwm_apply_state() function. pwm_adjust_config() is allowing smooth handover between the bootloader and the kernel. This function tries to adapt the current PWM state to the PWM arguments coming from a PWM lookup table or a DT definition without changing the duty_cycle/period proportion. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [thierry.reding@gmail.com: fix a couple of typos] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Add hardware readout infrastructureBoris Brezillon
Add a ->get_state() function to the pwm_ops struct to let PWM drivers initialize the PWM state attached to a PWM device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Move the enabled/disabled info into pwm_stateBoris Brezillon
Prepare the transition to PWM atomic update by moving the enabled and disabled state into the pwm_state struct. This way we can easily update the whole PWM state by copying the new state in the ->state field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Introduce the pwm_state conceptBoris Brezillon
The PWM state, represented by its period, duty_cycle and polarity is currently directly stored in the PWM device. Declare a pwm_state structure embedding those field so that we can later use this struct to atomically update all the PWM parameters at once. All pwm_get_xxx() helpers are now implemented as wrappers around pwm_get_state(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Keep PWM state in sync with hardware stateBoris Brezillon
Before the introduction of pwm_args, the core was resetting the PWM period and polarity states to the reference values (those provided through the DT, a PWM lookup table or hardcoded in the driver). Now that all PWM users are correctly using pwm_args to configure their PWM device, we can safely remove the pwm_apply_args() call in pwm_get() and of_pwm_get(). We can also get rid of the pwm_set_period() call in pwm_apply_args(), because PWM users are now directly using pargs->period instead of pwm_get_period(). By doing that we avoid messing with the current PWM period. The only remaining bit in pwm_apply_args() is the initial polarity setting, and it should go away when all PWM users have been patched to use the atomic API (with this API the polarity will be set along with other PWM arguments when configuring the PWM). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Use pwm_get/set_xxx() helpers where appropriateBoris Brezillon
Use pwm_get/set_xxx() helpers instead of directly accessing the pwm->xxx field. Doing that will ease adaptation of the PWM framework to support atomic update. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Get rid of pwm->lockBoris BREZILLON
PWM devices are not protected against concurrent accesses. The lock in struct pwm_device might let PWM users think it is, but it's actually only protecting the enabled state. Removing this lock should be fine as long as all PWM users are aware that accesses to the PWM device have to be serialized, which seems to be the case for all of them except the sysfs interface. Patch the sysfs code by adding a lock to the pwm_export struct and making sure it's taken for all relevant accesses to the exported PWM device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: rcar: Make use of pwm_is_enabled()Boris BREZILLON
Commit 5c31252c4a86 ("pwm: Add the pwm_is_enabled() helper") introduced a new function to test whether a PWM device is enabled or not without manipulating PWM internal fields. Hiding this is necessary if we want to smoothly move to the atomic PWM config approach without impacting PWM drivers. Fix this driver to use pwm_is_enabled() instead of directly accessing the ->flags field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>