summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2017-06-13pwm: tegra: Set maximum pwm clock source per SoC tapeoutLaxman Dewangan
The PWM hardware IP is taped-out with different maximum frequency on different SoCs. From HW team: Before Tegra186, it is 48 MHz. In Tegra186, it is 102 MHz. Add support to limit the clock source frequency to the maximum IP supported frequency. Provide these values via SoC chipdata. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-05-22pwm: jz4740: Let the pinctrl driver configure the pinsPaul Cercueil
Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. One inherent problem of this new approach is that the pinctrl framework does not allow us to configure each pin on demand, when the various PWM channels are requested or released. For instance, the PWM channels can be configured from sysfs, which would require all PWM pins to be configured properly beforehand for the PWM function, eventually causing conflicts with other platform or board drivers. The proper solution here would be to modify the pwm-jz4740 driver to handle only one PWM channel, and create an instance of this driver for each one of the 8 PWM channels. Then, it could use the pinctrl framework to dynamically configure the PWM pin it controls. Until this can be done, the only jz4740 board supported upstream (Qi lb60) can configure all of its connected PWM pins in PWM function mode, since those are not used by other drivers nor by GPIOs on the board. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-13Merge branch 'for-4.12/drivers' into for-nextThierry Reding
2017-04-13pwm: tegra: Read PWM clock source rate in driver initLaxman Dewangan
It is required to know the PWM clock source frequency to calculate the PWM period. In driver, the clock source frequency of the PWM does not get change and, hence, get the clock source frequency in driver init. Get this values later for period calculation from pwm_config(). This will help in avoiding the clock call for getting clock rate in the pwm_config() each time. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-13pwm: pca9685: Fix GPIO-only operationSven Van Asbroeck
GPIO-only driver operation never clears the SLEEP bit, which can cause the GPIOs to become unusable. Example: 1. user requests first PWM -> driver clears SLEEP bit 2. user frees last PWM -> driver sets SLEEP bit 3. user requests GPIO 4. user switches GPIO on -> output does not turn on because SLEEP bit is set Prevent this behaviour by letting the runtime PM framework control the SLEEP bit. This will put the chip to SLEEP if no PWMs/GPIOs are exported or in use. Fixes: bccec89f0a35 ("Allow any of the 16 PWMs to be used as a GPIO") Reported-by: Sven Van Asbroeck <TheSven73@googlemail.com> Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com> Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-13pwm: mediatek: Don't explicitly set .ownerkbuild test robot
drivers/pwm/pwm-mediatek.c:210:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: John Crispin <john@phrozen.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-13pwm: tegra: Avoid potential overflow for short periodsThierry Reding
For very short periods, the result of the division might overflow the unsigned long hz variable (on 32-bit architectures). Avoid that by making it an unsigned long long. While at it, also remove an unneeded local variable whose only purpose is to store a temporary computation. Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-12pwm: tegra: Add support to configure pin state in suspends/resumeLaxman Dewangan
In some of NVIDIA Tegra's platform, PWM controller is used to control the PWM controlled regulators. PWM signal is connected to the VID pin of the regulator where duty cycle of PWM signal decide the voltage level of the regulator output. When system enters suspend, some PWM client/slave regulator devices require the PWM output to be tristated. Add support to configure the pin state via pinctrl frameworks in suspend and active state of the system. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-12pwm: tegra: Increase precision in PWM rate calculationLaxman Dewangan
The rate of the PWM calculated as follows: hz = NSEC_PER_SEC / period_ns; rate = (rate + (hz / 2)) / hz; This has the precision loss in lower PWM rate. Change this to have more precision as: hz = DIV_ROUND_CLOSEST_ULL(NSEC_PER_SEC * 100, period_ns); rate = DIV_ROUND_CLOSEST(rate * 100, hz) Example: 1. period_ns = 16672000, PWM clock rate is 200 KHz. Based on old formula hz = NSEC_PER_SEC / period_ns = 1000000000ul/16672000 = 59 (59.98) rate = (200K + 59/2)/59 = 3390 Based on new method: hz = 5998 rate = DIV_ROUND_CLOSE(200000*100, 5998) = 3334 If we measure the PWM signal rate, we will get more accurate period with rate value of 3334 instead of 3390. 2. period_ns = 16803898, PWM clock rate is 200 KHz. Based on old formula: hz = 59, rate = 3390 Based on new formula: hz = 5951, rate = 3360 The PWM signal rate of 3360 is more near to requested period than 3333. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-12pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementationLaxman Dewangan
Use macro DIV_ROUND_CLOSEST_ULL() for 64-bit division to closest one instead of implementing the same locally. This increase readability. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: Add MediaTek PWM supportJohn Crispin
This patch adds support for the PWM core found on current ARM base SoCs made by MediaTek. This IP core supports 5 channels and has 2 operational modes. There is the old mode, which is a classical PWM and the new mode which allows the user to define bitmasks that get clocked out on the pins. As the subsystem currently only supports PWM cores with the "old" mode, we can safely ignore the "new" mode for now. Signed-off-by: John Crispin <john@phrozen.org> [thierry.reding@gmail.com: minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: atmel: Enable PWM on sama5d2Claudiu Beznea
sama5d2 can use the same atmel_pwm_data as sama5d3. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: atmel: Switch to atomic PWMClaudiu Beznea
The currently Atmel PWM controllers supported by this driver could change period or duty factor without channel disable, for regular channels (sama5d3 support this by using period or duty factor update registers, sam9rl support this by writing channel update register and select the corresponding update: period or duty factor). The chip doesn't support run time changings of signal polarity. To take advantage of atomic PWM framework and let controller works without glitches, in this patch only the duty factor could be changed without disabling PWM channel. For period and signal polarity the atomic PWM is simulated by disabling + enabling the right PWM channel. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: atmel-hlcdc: Implement the suspend/resume hooksBoris Brezillon
Implement the suspend/resume hooks to make sure the PWM device is restored to a correct state after a suspend. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: atmel-hlcdc: Convert to the atomic PWM APIBoris Brezillon
Implement the ->apply() hook and drop the ->enable(), ->disable, ->set_polarity and ->config() ones. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: rockchip: State of PWM clock should synchronize with PWM enabled stateDavid Wu
If the PWM was not enabled at U-Boot loader, PWM could not work for clock always disabled at PWM driver. The PWM clock is enabled at beginning of pwm_apply(), but disabled at end of pwm_apply(). If the PWM was enabled at U-Boot loader, PWM clock is always enabled unless closed by ATF. The pwm-backlight might turn off the power at early suspend, should disable PWM clock for saving power consume. It is important to provide opportunity to enable/disable clock at PWM driver, the PWM consumer should ensure correct order to call PWM enable and disable, and PWM driver ensure state of PWM clock synchronized with PWM enabled state. Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update") Cc: stable@vger.kernel.org Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: lpss: Set enable-bit before waiting for update-bit to go lowHans de Goede
At least on cherrytrail, the update bit will never go low when the enabled bit is not set. This causes the backlight on my cube iwork8 air tablet to never turn on again after being turned off because in the pwm_lpss_apply enable path pwm_lpss_update will fail causing an error exit and the enable-bit to never get set. Any following pwm_lpss_apply calls will fail the pwm_lpss_is_updating check. Since the docs say that the update bit should be set before the enable-bit, split pwm_lpss_update into setting the update-bit and pwm_lpss_wait_for_update, and move the pwm_lpss_wait_for_update call in the enable path to after setting the enable-bit. Fixes: 10d56a4 ("pwm: lpss: Avoid reconfiguring while UPDATE bit...") Cc: Ilkka Koskinen <ilkka.koskinen@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-04-06pwm: lpss: Split Tangier configurationAndy Shevchenko
As a preparation for special treatment for Broxton we split Tangier configuration. Fixes: b89b4b7a3d0a ("pwm: lpss: pci: Enable PWM module on Intel Edison") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-03-01Merge tag 'pwm/for-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set contains mostly fixes to existing drivers as well as cleanup of code that's not been in active use for a while" * tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits) acpi: lpss: call pwm_add_table() for BSW PWM device pwm: Try to load modules during pwm_get() pwm: Don't hold pwm_lookup_lock longer than necessary pwm: Make the PWM_POLARITY flag in DTB optional pwm: Print error messages with pr_err() instead of pr_debug() pwm: imx: Add polarity inversion support to i.MX's PWMv2 pwm: imx: doc: Update imx-pwm.txt documentation entry pwm: imx: Remove redundant i.MX PWMv2 code pwm: imx: Provide atomic PWM support for i.MX PWMv2 pwm: imx: Move PWMv2 wait for fifo slot code to a separate function pwm: imx: Move PWMv2 software reset code to a separate function pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM pwm: imx: Add separate set of PWM ops for v1 and v2 pwm: imx: Remove ipg clock and enable per clock when required pwm: lpss: Add Intel Gemini Lake PCI ID pwm: lpss: Do not export board infos for different PWM types pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled pwm: lpss: Switch to new atomic API pwm: lpss: Allow duty cycle to be 0 pwm: lpss: Avoid potential overflow of base_unit ...
2017-02-10Merge branch 'for-4.11/drivers' into for-nextThierry Reding
2017-01-30pwm: Try to load modules during pwm_get()Hans de Goede
Add a module name string to the pwm_lookup struct and if specified try to load the module using request_module() if pwmchip_find_by_name() is unable to find the PWM chip. This is a last resort to work around drivers that can't - and can't be made to - deal with deferred probe. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [thierry.reding@gmail.com: rename new macro, reword commit message] [thierry.reding@gmail.com: add comment explaining use-case] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Don't hold pwm_lookup_lock longer than necessaryHans de Goede
There is no need to hold pwm_lookup_lock after we're done with looping over pwm_lookup_list, so release it earlier. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Make the PWM_POLARITY flag in DTB optionalLothar Wassmann
Change the PWM chip driver registration so that a chip driver that supports polarity inversion can still be used with DTBs that don't provide the polarity flag as part of the specifier. This is done to provide polarity inversion support for the pwm-imx driver without having to modify all existing DTS files. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Print error messages with pr_err() instead of pr_debug()Lothar Wassmann
Make the messages that are printed in case of fatal errors actually visible to the user without having to recompile the driver with debugging enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Add polarity inversion support to i.MX's PWMv2Lukasz Majewski
With this patch the polarity settings for i.MX's PWMv2 is now supported on top of atomic PWM setting Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Remove redundant i.MX PWMv2 codeLukasz Majewski
The code providing functionality surpassed by the atomic PWM is not needed anymore and hence can be removed. Suggested-by: Stefan Agner <stefan@agner.ch> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Provide atomic PWM support for i.MX PWMv2Lukasz Majewski
This commit provides apply() callback implementation for i.MX's PWMv2. Suggested-by: Stefan Agner <stefan@agner.ch> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Move PWMv2 wait for fifo slot code to a separate functionLukasz Majewski
The code, which waits for fifo slot, has been extracted from imx_pwm_config_v2 function and moved to new one - imx_pwm_wait_fifo_slot(). This change reduces the overall size of imx_pwm_config_v2() and prepares it for atomic PWM operation. Suggested-by: Stefan Agner <stefan@agner.ch> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Move PWMv2 software reset code to a separate functionLukasz Majewski
The software reset code has been extracted from imx_pwm_config_v2 function and moved to new one - imx_pwm_sw_reset(). This change reduces the overall size of imx_pwm_config_v2() and prepares it for atomic PWM operation. Suggested-by: Stefan Agner <stefan@agner.ch> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Rewrite v1 code to facilitate switch to atomic PWMLukasz Majewski
The code has been rewritten to remove "generic" calls to imx_pwm_{enable|disable|config}. Such approach would facilitate switch to atomic PWM (a.k.a ->apply()) implementation. Suggested-by: Stefan Agner <stefan@agner.ch> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Add separate set of PWM ops for v1 and v2Lukasz Majewski
This patch provides separate set of PWM operations utilized by i.MX's v1 and v2 of the PWM hardware. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: imx: Remove ipg clock and enable per clock when requiredSascha Hauer
The use of the ipg clock was introduced with commit 7b27c160c681 ("pwm: i.MX: fix clock lookup"). In the commit message it was claimed that the ipg clock is enabled for register accesses. This is true for the ->config() callback, but not for the ->set_enable() callback. Given that the ipg clock is not consistently enabled for all register accesses we can assume that either it is not required at all or that the current code does not work. Remove the ipg clock code for now so that it's no longer in the way of refactoring the driver. On the other hand, the i.MX 7 IP requires the peripheral clock to be enabled before accessing its registers. Since ->config() can be called when the PWM is disabled (in which case, the peripheral clock is also disabled), we need to surround the imx->config() with clk_prepare_enable(per_clk)/clk_disable_unprepare(per_clk) calls. Note that the driver was working fine for the i.MX 7 IP so far because the ipg and peripheral clock use the same hardware clock gate, which guaranteed peripheral clock activation even when ->config() was called when the PWM was disabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Add Intel Gemini Lake PCI IDMika Westerberg
Intel Gemini Lake PWM is pretty much same as used in Intel Broxton. Add this new PCI ID to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Do not export board infos for different PWM typesAndy Shevchenko
The PWM LPSS probe drivers just pass a pointer to the exported board info structures to pwm_lpss_probe() based on device PCI or ACPI ID. In order to remove the knowledge of specific devices from library part of the driver and reduce noise in exported namespace just duplicate the board info structures and stop exporting them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabledIlkka Koskinen
PWM Configuration register has SW_UPDATE bit that is set when a new configuration is written to the register. The bit is automatically cleared at the start of the next output cycle by the IP block. If one writes a new configuration to the register while it still has the bit enabled, PWM may freeze. That is, while one can still write to the register, it won't have an effect. Thus, we try to sleep long enough that the bit gets cleared and make sure the bit is not enabled while we update the configuration. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Richard Griffiths <richard.a.griffiths@intel.com> Signed-off-by: Ilkka Koskinen <ilkka.koskinen@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Switch to new atomic APIAndy Shevchenko
Instead of doing things separately, which is not so reliable on some platforms, switch the driver to use new atomic API, i.e. ->apply() callback. The change has been tested on Intel platforms such as Broxton, BayTrail, and Merrifield. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Allow duty cycle to be 0Andy Shevchenko
A duty cycle is represented by values [0..<period>] which reflects [0%..100%]. 0% of the duty cycle means always off (logical "0") on output. Allow this in the driver. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: lpss: Avoid potential overflow of base_unitAndy Shevchenko
The resolution of base_unit is derived from base_unit_bits and thus must be equal to (2^base_unit_bits - 1). Otherwise frequency and therefore base_unit might potentially overflow. Prevent the above by substracting 1 in all cases where base_unit_bits or derivative is used. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-25pwm: Add driver for STM32 plaftormBenjamin Gaignard
This driver adds support for PWM driver on STM32 platform. The SoC have multiple instances of the hardware IP and each of them could have small differences: number of channels, complementary output, auto reload register size... version 9: - fix commit message header - remove one space MODULE_ALIAS version 8: - fix comments done by Thierry on version 7 version 6: - change st,breakinput parameter to make it usuable for stm32f7 too. version 4: - detect at probe time hardware capabilities - fix comments done on v2 and v3 - use PWM atomic ops version 2: - only keep one comptatible - use DT parameters to discover hardware block configuration Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-20pwm: pca9685: Fix period change with same duty cycleClemens Gruber
When first implementing support for changing the output frequency, an optimization was added to continue the PWM after changing the prescaler without having to reprogram the ON and OFF registers for the duty cycle, in case the duty cycle stayed the same. This was flawed, because we compared the absolute value of the duty cycle in nanoseconds instead of the ratio to the period. Fix the problem by removing the shortcut. Fixes: 01ec8472009c9 ("pwm-pca9685: Support changing the output frequency") Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-19pwm: constify pwm_ops structuresBhumika Goyal
Declare pwm_ops structures as const as they are only stored in the ops field of a pwm_chip structure. This field is of type const struct pwm_ops *, so pwm_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct pwm_ops i@p={...}; @ok1@ identifier r1.i; position p; struct pxa_pwm_chip pwm; struct bfin_pwm_chip bwm; struct vt8500_chip vp; struct imx_chip icp; @@ ( pwm.chip.ops=&i@p | bwm.chip.ops=&i@p | vp.chip.ops=&i@p | icp.chip.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct pwm_ops i; File size details: text data bss dec hex filename 1646 328 0 1974 7b6 drivers/pwm/pwm-imx.o 1742 224 0 1966 7ae drivers/pwm/pwm-imx.o 1941 296 0 2237 8bd drivers/pwm/pwm-pxa.o 2037 192 0 2229 8b5 drivers/pwm/pwm-pxa.o 1946 296 0 2242 8c2 drivers/pwm/pwm-vt8500.o 2050 192 0 2242 8c2 drivers/pwm/pwm-vt8500.o The drivers/pwm/pwm-bfin.o file did not compile. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-19pwm: bcm-iproc: Update dependencies for compile-testScott Branden
Add dependency on COMMON_CLK and allow COMPILE_TEST for broader compile coverage. Default to Y for IPROC SoCs. This allows the driver to simply be enabled by selecting PWM. Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> [thierry.reding@gmail.com: reword commit message] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-19pwm: pca9685: Allow any of the 16 PWMs to be used as a GPIOMika Westerberg
The PCA9685 controller has full on/off bit for each PWM channel. Setting this bit bypasses the PWM control and the line works just as it would be a GPIO. Furthermore in Intel Galileo it is actually used as GPIO output for discreet muxes on the board. This patch adds GPIO output only support for the driver so that we can control the muxes on Galileo using standard GPIO interfaces available in the kernel. GPIO and PWM functionality is exclusive so only one can be active at a time on a single PWM channel. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-04pwm: Remove .can_sleep from struct pwm_chipThierry Reding
All PWM devices have been marked as "might sleep" since v4.5, there is no longer a need to differentiate on a per-chip basis. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-04pwm: Remove pwm_can_sleep()Thierry Reding
The last user of this function has been removed, so it is no longer needed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-12-15Merge tag 'pwm/for-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This is a very tiny pull request, with just a new driver for HiSilicon BVT SoCs and a cleanup for the Amlogic Meson driver. There are other patches on the list, but my timing was really bad this time and I ended up not having the time to look at them in enough detail to be comfortable merging them" * tag 'pwm/for-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Add PWM driver for HiSilicon BVT SOCs pwm: meson: Remove unneeded platform MODULE_ALIAS
2016-11-29pwm: Add PWM driver for HiSilicon BVT SOCsyuanjian
Add PWM driver for the PWM controller found on HiSilicon BVT SoCs such as Hi3519V100, Hi3516CV300, etc. The PWM controller is primarily in charge of controlling the P-Iris lens. Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: Jian Yuan <yuanjian12@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-11-29pwm: Fix device reference leakJohan Hovold
Make sure to drop the reference to the parent device taken by class_find_device() after "unexporting" any children when deregistering a PWM chip. Fixes: 0733424c9ba9 ("pwm: Unexport children before chip removal") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-10-21pwm: meson: Remove unneeded platform MODULE_ALIASJavier Martinez Canillas
The Amlogic Meson is a DT-only platform, which means the devices are registered via OF and not using the legacy platform devices support. So there's no need to have a MODULE_ALIAS("platform:meson-pwm") since the reported uevent MODALIAS to user-space will always be the OF one. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-10-21pwm: meson: Add missing spin_lock_init()Axel Lin
The driver uses the spin_lock but does not initialize it. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>