summaryrefslogtreecommitdiff
path: root/drivers/regulator/da9052-regulator.c
AgeCommit message (Collapse)Author
2016-07-20regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limitsSteve Twiss
This fix alters the minimum and maximum BUCK voltage limits for DA9052 and DA9053. It does so for the following cases: DA9052 - BUCK3 (MEM) min: 0.925V -> 0.950V max: 2.500V -> 2.525V DA9053 - BUCK3 (MEM) min: 0.925V -> 0.950V max: 2.500V -> 2.525V - BUCK4 (PERI) min: 0.925V -> 0.950V max: 2.500V -> 2.525V The voltage range remains the same, but the limits are shifted by +0.025V. This change is provided on DA9052:MEM, DA9053:MEM and DA9053:PERI and is a voltage difference of 0.025V, compared to those measured before this fix is applied. The patch has the effect of decreasing *all* measured voltages on those BUCKs when compared against the previously measured values for the same software voltage request. For example, with this fix applied for DA9052:MEM, DA9053:MEM and DA9053:PERI, the following is true. Because the previous software defined slot 0 as being 0.925V, if a request for 0.950V was previously sent, the slot 1 voltage would have been used. This would have corresponded to an actual measured voltage of 0.975V. But, with this patch fix, and with slot 0 properly aligned to 0.950V, if a voltage of 0.950V is requested by software, a measured value of 0.950V will be provided. Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22regulator: da9*: constify regulator_ops structuresJulia Lawall
The regulator_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-16regulator: da9053: Update regulator for DA9053 BC silicon supportSteve Twiss
Provide an additional case entry for DA9053_BC in the find_regulator_info() function in order to support BC type silicon for the DA9053 device. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-27mfd: da9052: Fix broken regulator probeJohan Hovold
Fix broken probe of da9052 regulators, which since commit b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") use a non-deterministic platform-device id to retrieve static regulator information. Fortunately, adequate error handling was in place so probe would simply fail with an error message. Update the mfd-cell ids to be zero-based and use those to identify the cells when probing the regulator devices. Fixes: b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") Cc: stable <stable@vger.kernel.org> # v3.19 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-26regulator: of: Add regulator desc param to of_get_regulator_init_data()Javier Martinez Canillas
The of_get_regulator_init_data() function is used to extract the regulator init_data but information on how to extract certain data is defined in the static regulator descriptor (e.g: how to map the hardware operating modes). Add a const struct regulator_desc * parameter to the function signature so the parsing logic could use the information in the struct regulator_desc. of_get_regulator_init_data() relies on of_get_regulation_constraints() to actually extract the init_data so it has to pass the struct regulator_desc but that is modified on a later patch. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20regulator: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-10regulator: remove unnecessary of_node_get() to parentGuodong Xu
These of_node_get() were added to balance refcount decrements inside of of_find_node_by_name(). See: commit c92f5dd2c42f ("regulator: Add missing of_node_put()") However of_find_node_by_name() was then replaced by of_get_child_by_name(), which doesn't call of_node_put() against its input parameter. So, need to remove these unnecessary of_node_get() calls. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-02-19regulator: da9052: Add ramp speed information for the DVC regulatorsPhilipp Zabel
Some LDOs and DCDCs have a fixed ramp speed of 6.25 mV/µs. This patch adds the set_voltage_time_sel function to let consumers know about this. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14regulator: da9052: Use of_get_child_by_nameSachin Kamat
of_find_node_by_name walks the allnodes list, and can thus walk outside of the parent node. Use of_get_child_by_name instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-24Merge remote-tracking branch 'regulator/topic/da9052' into regulator-nextMark Brown
2013-10-24regulator: da9052: Revert se apply_[reg|bit] with regmap based voltage_sel ↵Axel Lin
operations This reverts commit 68f7506017ba67f1334cf086ffab76606f2c5ac4. Michael reported that with this patch we loose the fix_io code path from da9052_reg_update. Thus revert it. Reported-by: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: da9052: Convert to devm_regulator_registerAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30regulator: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-02-19Merge remote-tracking branch 'regulator/topic/of' into regulator-nextMark Brown
2013-01-30regulator: Add missing of_node_put()Axel Lin
of_find_node_by_name() returns a node pointer with refcount incremented, use of_node_put() on it when done. of_find_node_by_name() will call of_node_put() against from parameter, thus we also need to call of_node_get(from) before calling of_find_node_by_name(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24regulator: da9052: Use apply_[reg|bit] with regmap based voltage_sel operationsAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10Merge remote-tracking branch 'regulator/topic/hotplug' into regulator-nextMark Brown
2012-11-27regulator: da9052: Ensure setting current limit within specific rangeAxel Lin
Checking da9052_current_limits[row][i] <= max_uA is not enough, it is possible da9052_current_limits[row][i] may less than the requested min_uA. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-28regulator: da9052: set_current_limit should select the maximum current in ↵Axel Lin
specific range Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-12regulator: da9052: initialize of_node param for regulator registerAxel Lin
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09regulator: da9052: Use for_each_child_of_node() macroAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16regulator: da9052: Convert to set_voltage_sel and map_voltageAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12Merge remote-tracking branch 'regulator/topic/drivers' into regulator-nextMark Brown
Conflicts: drivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)
2012-05-07regulator: da9052: fix bug in device tree iteration loopYing-Chun Liu (PaulLiu)
The driver of da9052 is buggy due to the iteration loop of device tree. This patch fix the loop condition to make the driver work with device tree. Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-04regulator: da9052: Use regulator_get_voltage_sel_regmap()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23regulator: da9052: Use generic regmap enable/disable operationsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16regulator: da9052: Directly include of.hMark Brown
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13regulator: da9052: add device tree supportYing-Chun Liu (PaulLiu)
This patch adds device tree support for dialog regulators Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09regulator: core: Use a struct to pass in regulator runtime configurationMark Brown
Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-05regulator: da9052: Remove unneeded devm_kfree callsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01regulator: Refactor to use one da9052_ldo_ops/da9052_dcdc_ops for all LDOs/DCDCsAxel Lin
In current implementation, da9052_ldo_ops and da9052_ldo5_6_ops are very similar, only the set_voltage is slightly different. da9052_buckperi_ops and da9052_dcdc_ops are also similar. This patch adds da9052_regulator_set_voltage for the set_voltage callback used by all LDOs and DCDCs. Rework da9052_get_regulator_voltage_sel and da9052_set_dcdc_voltage to make it possible to be shared by all DCDCs. Rework da9052_list_voltage to make it to be shared by all DCDCs and LDOs. Then we can remove da9052_ldo5_6_ops and da9052_buckperi_ops. We can also remove DA9052_LDO5_6 and DA9052_BUCKPERI macros which is not used now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01regulator: Fix da9052 ldo regulator namesAxel Lin
The regulator name for LDOs are LDO4 ... LDO13 in current implementation. The correct regulator name for LDOs should be LDO1 ... LDO10. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: da9052: Ensure the selected voltage falls within the specified rangeAxel Lin
Integer division may truncate the result, use DIV_ROUND_UP to ensure the selected voltage falls within the specified range. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Set n_voltages for da9052 regulatorsAxel Lin
The n_voltages setting for all LDOs and DCDCs are missing in current code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05regulator: Fix mask parameter in da9052_reg_update callsAxel Lin
If the mask parameter is 0, info->activate_bit bit won't be set by calling da9052_reg_update. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20regulator: da9052: Staticize non-exported symbolsAxel Lin
da9052_regulator_info and da9053_regulator_info are not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17regulator: Replace kzalloc with devm_kzalloc and if-else with a switch-case ↵Ashish Jangam
for da9052-regulator Reported-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15regulator: Update da9052-regulator for DT changesMark Brown
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15regulator: DA9052/53 Regulator supportAshish Jangam
The Dialog PMIC has below featured regulators:- DA9052-BC - 4 DVS Buck converters 0.5V - 3.6V upto 1Amp. DA9053-AA/BX - 4 DVS Buck converters 0.5V - 2.5V upto 3Amp. DA9052/53 - 10 Programmable LDO's High PSSR, 1% accuracy. This patch support all the DA9052 and Da9053 regulators. The output voltages are fully programmable via I2C or SPI interface. The platform data with regulation constraints is passed down from the board to the regulator. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>