summaryrefslogtreecommitdiff
path: root/drivers/regulator/helpers.c
AgeCommit message (Collapse)Author
2021-05-19regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmapAxel Lin
Return -EINVAL if ramp_delay_table is NULL. Also add WARN_ON since the driver code needs fix if this happened. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210519132255.1683863-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-02regulator: Add regmap helper for ramp-delay settingMatti Vaittinen
Quite a few regulator ICs do support setting ramp-delay by writing a value matching the delay to a ramp-delay register. Provide a simple helper for table-based delay setting. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/f101f1db564cf32cb58719c77af0b00d7236bb89.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-02regulator: helpers: Export helper voltage listingMatti Vaittinen
Some drivers need to translate voltage values to selectors prior regulator registration. Currently a regulator_desc based list_voltages helper is only exported for regulators using the linear_ranges. Export similar helper also for regulators using simple linear mapping. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/1200ef7a50c84327ada019b85f6527b4fc9b5ce1.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-26regulator: core: return zero for selectors lower than linear_min_selClaudiu Beznea
Selectors lower than linear_min_sel should not be considered invalid. Thus return zero in case _regulator_list_voltage(), regulator_list_hardware_vsel() or regulator_list_voltage_table() receives such selectors as argument. Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel") Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1606325147-606-1-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-13regulator: core: validate selector against linear_min_selClaudiu Beznea
There are regulators who's min selector is not zero. Selectors loops (looping b/w zero and regulator::desc::n_voltages) might throw errors because invalid selectors are used (lower than regulator::desc::linear_min_sel). For this situations validate selectors against regulator::desc::linear_min_sel. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605280870-32432-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-12regulator: Fix pickable ranges mappingMatti Vaittinen
Pickable ranges mapping function never used range min selector. Thus existing drivers broke when proper linear_ranges functionality was taken in use. Fix this for now just by ignoring the minimum selector. Fixes: 60ab7f4153b6 ("regulator: use linear_ranges helper") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20200612090225.GA3243@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-08regulator: use linear_ranges helperMatti Vaittinen
Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14regulator: core: Add regulator_is_equal() helperMarek Vasut
Add regulator_is_equal() helper to compare whether two regulators are the same. This is useful for checking whether two separate regulators in a driver are actually the same supply. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Mark Brown <broonie@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-02regulator: provide regulator_bulk_set_supply_names()Bartosz Golaszewski
There are many regulator consumers who - before using the regulator bulk functions - set the supply names in regulator_bulk_data using a for loop. Let's provide a simple helper in the consumer API that allows users to do the same with a single function call. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190830071740.4267-2-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-18regulator: core: Make entire header comment C++ styleMark Brown
Makes things look more consistent. Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-03regulator: core: Add set/get_current_limit helpers for regmap usersAxel Lin
By setting curr_table, n_current_limits, csel_reg and csel_mask, the regmap users can use regulator_set_current_limit_regmap and regulator_get_current_limit_regmap for set/get_current_limit callbacks. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-14regulator: add regulator_desc_list_voltage_linear_rangeMatti Vaittinen
Add regulator_desc_list_voltage_linear_range which can be used by drivers for getting the voltages before regulator is registered. This may be useful for drivers which need to fetch the voltage selectors at device-tree parsing callback. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Tested-by: Angus Ainslie <angus@akkea.ca> Reviewed-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28Merge tag 'bd71847-support' into regulator-4.20Mark Brown
regulator/mfd: Support for the ROHM BD71847 This adds support for the BD71847 which touches both MFD and regulator. There's a few other bits and pieces included as some dependency patches had already been applied so would've required rebasing.
2018-09-28regulator: Support regulators where voltage ranges are selectableMatti Vaittinen
For example ROHM BD71837 and ROHM BD71847 Power management ICs have regulators which provide multiple linear ranges. Ranges can be selected by individual non contagious bit in vsel register. Add regmap helper functions for selecting ranges. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28regulator: regmap helpers - support overlapping linear rangesMatti Vaittinen
Don't give up voltage mapping if first range with suitable min/max uV does not provide the wanted voltage. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06regulator: helpers: Add regmap set_pull_down helperCharles Keepax
Add a helper function regulator_set_pull_down_regmap to allow regmap based regulators to easily enable pull down. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06regulator: helpers: Add regmap set_soft_start helperCharles Keepax
Add a helper function regulator_set_soft_start_regmap to allow regmap based regulators to easily enable soft start. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmapCharles Keepax
The handling of bypass_val_on that was added in regulator_get_bypass_regmap is done unconditionally however several drivers don't define a value for bypass_val_on. This results in those drivers reporting bypass being enabled when it is not. In regulator_set_bypass_regmap we use bypass_mask if bypass_val_on is zero. This patch adds similar handling in regulator_get_bypass_regmap. Fixes: commit dd1a571daee7 ("regulator: helpers: Ensure bypass register field matches ON value") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-22regulator: helpers: Ensure bypass register field matches ON valueJon Hunter
When checking bypass state for a regulator, we check to see if any bits in the bypass mask are set. For most cases this is fine because there is typically, only a single bit used to determine if the regulator is in bypass. However, for some regulators, such as LDO6 on AS3722, the bypass state is indicate by a value rather than a single bit. Therefore, when checking the bypass state, check that the bypass field matches the ON value. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02regulator: helper: Add helper to configure active-discharge using regmapLaxman Dewangan
Add helper function to set the state of active-discharge of regulator using regmap. The HW regulator driver can directly use this by providing the necessary information in the regulator descriptor. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-19regulator: Fix the function name in documentationKrzysztof Kozlowski
The function name in kernel-doc for regulator_map_voltage_linear_range() was wrong. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-03-06regulator: helpers: Modify helpers enabling multi-bit controlCarlo Caione
This patch extends the regulator helpers to account for device that use multiple bits for control when using regmap enable/disable/bypass ops. The actual regulator helpers wrongly assume that the regulator control is always performed using single bits, using in the regulator_desc struct only two parameters *_reg and *_mask defining register and mask for control. This patch extends this struct and introduces the helpers to take into account devices where control is performed using multiple bits and specific multi-bit values are used for enabling/disabling/bypassing the regulator. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-11regulator: Remove max_uV from struct regulator_linear_rangeAxel Lin
linear ranges means each range has linear voltage settings. So we can calculate max_uV for each linear range in regulator core rather than set the max_uV field in drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-09regulator: core: Move list_voltage_{linear,linear_range,table} to helpers.cAxel Lin
Move regulator_list_voltage_{linear,linear_range,table} helper functions to helpers.c. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-07regulator: core: Move helpers for drivers out into a separate fileMark Brown
Reduce the size of core.c a bit. Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-10 09:43:20 +0000