summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2011-11-28regulator: twl: fix twl4030 support for smps regulatorsTero Kristo
SMPS regulator voltage control differs from the one of the LDO ones. Current TWL code was using LDO regulator ops for controlling the SMPS regulators, which fails. This was fixed fixed by adding separate regulator type which uses correct logic and calculations for the voltage levels. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-28regulator: fix use after free bugLothar Waßmann
This is caused by dereferencing 'rdev' after device_unregister() in the regulator_unregister() function. 'rdev' is freed by device_unregister(), so it must not be dereferenced after this call. [Edited commit message for legibility -- broonie] Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28regulator: aat2870: Fix the logic of checking if no id is matched in ↵Axel Lin
aat2870_get_regulator In current implementation, the pointer ri is not NULL if no id is matched. Fix it by checking i == ARRAY_SIZE(aat2870_regulators) if no id is matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-23regulator: TPS65910: Fix VDD1/2 voltage selector countAfzal Mohammed
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-11-01Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regulatorLinus Torvalds
* 'for-linus' of git://opensource.wolfsonmicro.com/regulator: (22 commits) regulator: Constify constraints name regulator: Fix possible nullpointer dereference in regulator_enable() regulator: gpio-regulator add dependency on GENERIC_GPIO regulator: Add module.h include to gpio-regulator regulator: Add driver for gpio-controlled regulators regulator: remove duplicate REG_CTRL2 defines in tps65023 regulator: Clarify documentation for regulator-regulator supplies regulator: Fix some bitrot in the machine driver documentation regulator: tps65023: Added support for the similiar TPS65020 chip regulator: tps65023: Setting correct core regulator for tps65021 regulator: tps65023: Set missing bit for update core-voltage regulator: tps65023: Fixes i2c configuration issues regulator: Add debugfs file showing the supply map table regulator: tps6586x: add SMx slew rate setting regulator: tps65023: Fixes i2c configuration issues regulator: tps6507x: Remove num_voltages array regulator: max8952: removed unused mutex. regulator: fix regulator/consumer.h kernel-doc warning regulator: Ensure enough enable time for max8649 regulator: 88pm8607: Fix off-by-one value range checking in the case of no id is matched ...
2011-10-31regulator: Add module.h to drivers/regulator users as requiredPaul Gortmaker
Another group of drivers that are taking advantage of the implicit presence of module.h -- and will break when we pull the carpet out from under them during a cleanup. Fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31regulator: Add export.h for THIS_MODULE to dummy.cPaul Gortmaker
So that THIS_MODULE is still in scope once we clean up the presence of module.h being everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-24mfd: Move to the new db500 PRCMU APIMattias Nilsson
Now that we have a shared API between the DB8500 and DB5500 PRCMU's, switch to using this neutral API instead. We delete the parts of db8500-prcmu.h that is now PRCMU-neutral, and calls will be diverted to respective driver. Common registers are in dbx500-prcmu-regs.h and common accessors and defines in <linux/mfd/dbx500-prcmu.h> This way we get a a lot more abstraction and code reuse. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24regulator: Finish mc13783 conversion to the mc13xxx APISamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-14regulator: Fix possible nullpointer dereference in regulator_enable()Heiko Stübner
In the case where _regulator_enable returns an error it was not checked if a supplying regulator exists before trying to disable it, leading to a null pointer-dereference if no supplying regulator existed. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12regulator: gpio-regulator add dependency on GENERIC_GPIOHeiko Stübner
Without GENERIC_GPIO "struct gpio" is undefined leading to errors. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11regulator: Add module.h include to gpio-regulatorMark Brown
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-09regulator: Add driver for gpio-controlled regulatorsHeiko Stübner
This patch adds support for regulators that can be controlled via gpios. Examples for such regulators are the TI-tps65024x voltage regulators with 4 fixed and 1 runtime-switchable voltage regulators or the TI-bq240XX charger regulators. The number of controlling gpios is not limited, the mapping between voltage/current and target gpio state is done via the states map and the driver can be used for either voltage or current regulators. A mapping for a regulator with two GPIOs could look like: gpios = { { .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" }, { .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW, .label = "gpio name 2" }, } The flags element of the gpios array determines the initial state of the gpio, set during probe. The initial state of the regulator is also calculated from these values states = { { .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) }, { .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) }, { .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) }, { .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) }, } The target-state for the n-th gpio is determined by the n-th bit in the bitfield of the target-value. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-09regulator: remove duplicate REG_CTRL2 defines in tps65023H Hartley Sweeten
There are two sets of defines for the REG_CTRL2 bitfields and one of them has TPS65023_REG_CTRL2_DCDC1 defined incorrectly. Remove the duplicates and leave the correct one for TPS65023_REG_CTRL2_DCDC1. This fixes the following sparse warnings: drivers/regulator/tps65023-regulator.c:77:9: warning: preprocessor token TPS65023_REG_CTRL2_DCDC1 redefined drivers/regulator/tps65023-regulator.c:70:9: this was the original definition Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07regulator: Add WM1811 supportMark Brown
The WM1811 has a slightly different range on LDO2 to other WM8994 class devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04regulator: Fix return code from regulator_disable_deferred()Mark Brown
schedule_delayed_work() returns a bool indicating if the work was already queued when it succeeds so we need to squash a true down to zero. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-14regulator: Implement deferred disable supportMark Brown
It is a reasonably common pattern for hardware to require some delay after being quiesced before the disable has finalised, especially in mixed signal devices. For example, an active discharge may be required to ensure that the circuit starts up again in a known state. Avoid having to implement such delays in the regulator API by providing regulator_deferred_disable() which will do a regulator_disable() a specified number of milliseconds after it is called. Due to the reference counting done on regulators a deferred disable can be cancelled by doing another regulator_enable(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-28regulator: tps65023: Added support for the similiar TPS65020 chipMarcus Folkesson
Defines a new voltage-table and allows registering of the tps65020 device. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-28regulator: tps65023: Setting correct core regulator for tps65021Marcus Folkesson
TPS65023 is using VDCDC1 as core regulator and TPS65021 is using VDCDC3. Core-regulator and voltage-tables may differ between different regulators. These two is now passed as driver data. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-28regulator: tps65023: Set missing bit for update core-voltageMarcus Folkesson
Setting the GO bit in CTRL2 for updating the core voltage Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-28regulator: tps65023: Fixes i2c configuration issuesMarcus Folkesson
Allow i2c core voltage adjustments by clearing CORE ADJ Allowed bit in CTRL2 Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-28regulator: Add debugfs file showing the supply map tableMark Brown
Useful for working out why things aren't getting plugged together properly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-28regulator: tps6586x: add SMx slew rate settingXin Xie
Add output vlotage slew rate setting for SM0/SM1 Signed-off-by: Xin Xie <xxie@nvidia.com> Signed-off-by: Danny Huang <dahuang@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: tps65023: Fixes i2c configuration issuesMarcus Folkesson
Allow i2c core voltage adjustments by clearing CORE ADJ Allowed bit in CTRL2 Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: tps6507x: Remove num_voltages arrayAxel Lin
We can get n_voltages for each regulator from table_len of struct tps_info. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: max8952: removed unused mutex.MyungJoo Ham
This patch removes a mutex that is never used in the driver. Reported-by: Axel Lin Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: Ensure enough enable time for max8649Axel Lin
Integer division may truncate the result, thus max8649_enable_time() may return slightly shorter enable time. This patch fixes it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: 88pm8607: Fix off-by-one value range checking in the case of no ↵Axel Lin
id is matched In the case of no id is matched, the variable i is equal to ARRAY_SIZE(pm8607_regulator_info). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: tps65912: Remove unused define of TPS65912_MAX_REG_IDAxel Lin
Currently we define TPS65912_MAX_REG_ID as TPS65912_REG_LDO_10, but TPS65912_REG_LDO_10 is not defined at all. ( It looks like a typo of TPS65912_REG_LDO10 ) Currently, TPS65912_MAX_REG_ID is not used in this driver, it is safe to just remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-08regulator: aat2870-regulator.c needs module.hRandy Dunlap
aat2870-regulator.c needs to include linux/module.h to fix multiple build errors. drivers/regulator/aat2870-regulator.c:145: error: 'THIS_MODULE' undeclared here (not in a function) drivers/regulator/aat2870-regulator.c:230: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/regulator/aat2870-regulator.c:231: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/regulator/aat2870-regulator.c:232: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (23 commits) regulator: Improve WM831x DVS VSEL selection algorithm regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already set regulator: Set up GPIO for WM831x VSEL before enabling VSEL mode regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdc regulator: Fix WM831x DCDC DVS VSEL bootstrapping regulator: Fix WM831x regulator ID lookups for multiple WM831xs regulator: Fix argument format type errors in error prints regulator: Fix memory leak in set_machine_constraints() error paths regulator: Make core more chatty about some errors regulator: tps65910: Fix array access out of bounds bug regulator: tps65910: Add missing breaks in switch/case regulator: tps65910: Fix a memory leak in tps65910_probe error path regulator: TWL: Remove entry of RES_ID for 6030 macros ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxes regulator: Add basic per consumer debugfs regulator: Add rdev_crit() macro regulator: Refactor supply implementation to work as regular consumers regulator: Include the device name in the microamps_requested_ file regulator: Increase the limit on sysfs file names regulator: Properly register dummy regulator driver ...
2011-08-01Merge branch 'for-next' into for-linusLiam Girdwood
2011-07-31regulator: Storing tps65912 error codes in u8Dan Carpenter
get_ctrl_reg() returns -EINVAL so the error handling won't work here if reg is a u8. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31regulator: aat2870: Add AAT2870 regulator driverJin Park
Add regulator driver for AnalogicTech AAT2870. Signed-off-by: Jin Park <jinyoungp@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31tps65912: add regulator driverMargarita Olaya
The tps65912 consist of 4 DCDCs and 10 LDOs. The output voltages can be configured by the SPI or I2C interface, they are meant to supply power to the main processor and other components. Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-28regulator: Improve WM831x DVS VSEL selection algorithmMark Brown
Rather than using the maximum voltage we get passed to select the DVS voltage to use remember the highest voltage we've ever seen. This improves how the driver works when the consumer permits higher voltages than it will ever selects in order to support the widest possible voltage range. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-28regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already setMark Brown
If we don't have a DVS VSEL value already set when we start up then start it off with the value currently being used for ON. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-28regulator: Set up GPIO for WM831x VSEL before enabling VSEL modeMark Brown
If the VSEL is not in use prior to us starting up then we need to make sure we initialise the GPIO before we push the DVS control to being done by the GPIO. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-28regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdcMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-28regulator: Fix WM831x DCDC DVS VSEL bootstrappingMark Brown
Read our initial VSEL from the correct register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-28regulator: Fix WM831x regulator ID lookups for multiple WM831xsMark Brown
With multiple wm831x devices the device IDs used for the regulators will not always be contiguous so simply taking the modulus is not sufficient to look up the ID, we need to reverse the way the ID is generated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-23regulator: Convert tps65023 to use regmap APIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-22regulator: Fix argument format type errors in error printsMark Brown
We need to dereference the pointers to print their values. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-22regulator: Fix memory leak in set_machine_constraints() error pathsAxel Lin
Properly kfree rdev->constraints in all set_machine_constraints() error paths. Also properly kfree rdev->constraints in regulator_register() error paths. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-22regulator: Make core more chatty about some errorsMark Brown
Prevent some head scratching by making the core log about some rare but possible errors with invalid voltage ranges and modes being set. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-22regulator: tps65910: Fix array access out of bounds bugAxel Lin
For tps65910, the number of regulator is 13. ( ARRAY_SIZE(tps65910_regs) is 13) For tps65911, the number of regulator is 12. ( ARRAY_SIZE(tps65911_regs) is 12) If we are using this driver for tps65911, we hit array access out of bounds bug in tps65910_probe() because current implementation always assume the number of regulator is 13 and thus it will access tps65911_regs[12]. Fix it by setting correct num_regulators for both chips in tps65910_probe(), and allocated neccessay memory accordingly. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-22regulator: tps65910: Add missing breaks in switch/caseAxel Lin
Also add a default case in tps65910_list_voltage_dcdc to silence 'volt' may be used uninitialized in this function warning. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-22regulator: tps65910: Fix a memory leak in tps65910_probe error pathAxel Lin
Fix a memory leak if chip id is not matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>