summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2022-04-04regulator: atc260x: Fix missing active_discharge_on settingAxel Lin
Without active_discharge_on setting, the SWITCH1 discharge enable control is always disabled. Fix it. Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: rtq2134: Fix missing active_discharge_on settingAxel Lin
The active_discharge_on setting was missed, so output discharge resistor is always disabled. Fix it. Fixes: 0555d41497de ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: wm8994: Add an off-on delay for WM8994 variantJonathan Bakker
As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-30Merge tag 'regulator-fix-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes for the rt4831 driver which fix features that didn't work due to incomplete description of the register configuration" * tag 'regulator-fix-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: rt4831: Add active_discharge_on to fix discharge API regulator: rt4831: Add bypass mask to fix set_bypass API work
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-25regulator: rt4831: Add active_discharge_on to fix discharge APIChiYuan Huang
To use set_discharge helper function, active_discharge_on need to be added. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1648171577-9663-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-25regulator: rt4831: Add bypass mask to fix set_bypass API workChiYuan Huang
To use set/get_bypass helper function, bypass mask need to be specified. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1648171577-9663-2-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-21Merge tag 'regulator-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a quiet release for the regulator API, mainly a few new drivers plus a lot of fixes for the Raspberry Pi panel driver. There's also a SPI commit in here which I managed to apply to the wrong tree and then didn't notice until there were too many commits on top of it, sorry about that. - Make it easier to use the virtual consumer test driver with DT systems. - Substantial overhaul providing various fixes and robustness improvements for the Raspberry Pi panel driver. - Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas Instruments TPS62864x" * tag 'regulator-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits) regulator: qcom-rpmh: Add support for SDX65 regulator: dt-bindings: Add PMX65 compatibles regulator: vctrl: Use min() instead of doing it manually regulator: rt5190a: Add support for Richtek RT5190A PMIC regulator: Add bindings for Richtek RT5190A PMIC regulator: Convert TPS62360 binding to json-schema regulator: cleanup comments regulator: virtual: add devicetree support regulator: virtual: warn against production use regulator: virtual: use dev_err_probe() regulator: tps62864: Fix bindings for SW property regulator: Add support for TPS6286x regulator: Add bindings for TPS62864x regulator/rpi-panel-attiny: Use two transactions for I2C read regulator/rpi-panel-attiny: Use the regmap cache regulator: rpi-panel: Remove get_brightness hook regulator: rpi-panel: Add GPIO control for panel and touch resets regulator: rpi-panel: Convert to drive lines directly regulator: rpi-panel: Ensure the backlight is off during probe. regulator: rpi-panel: Serialise operations. ...
2022-03-18regulator: qcom-rpmh: Add support for SDX65Rohit Agarwal
Add support from RPMH regulators found in SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Link: https://lore.kernel.org/r/1647410837-22537-3-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-15regulator: vctrl: Use min() instead of doing it manuallyHaowen Bai
Fix following coccicheck warning: drivers/regulator/vctrl-regulator.c:188:15-17: WARNING opportunity for max() Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1647315190-16139-1-git-send-email-baihaowen@meizu.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-09regulator: rt5190a: Add support for Richtek RT5190A PMICChiYuan Huang
Add support for Richtek RT5190A PMIC. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1646812903-32496-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-07regulator: cleanup commentsTom Rix
For spdx Remove leading space, add space after // Replacements overriden to overridden Calulate to Calculate addional to additional regulatior to regulator devive to device Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220305162438.689442-1-trix@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-02regulator: virtual: add devicetree supportVincent Whitchurch
The reg-virt-consumer is very useful for development and testing of regulator drivers since it allows voltages and modes to be set from userspace. However, it currently requires platform data so it cannot be used without patching the kernel. Add support for probing it from the devicetree to remedy this. Since this driver is only meant for testing and is a purely software construct, no binding documentation is added. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220301111831.3742383-4-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-02regulator: virtual: warn against production useVincent Whitchurch
This driver is only meant for debugging and testing. Currently, it's not possible to use it without patching the kernel since it requires platform data, but we'll be adding devicetree support, so add a loud warning to make it clear that it's still only meant for debugging and testing. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220301111831.3742383-3-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-02regulator: virtual: use dev_err_probe()Vincent Whitchurch
Use dev_err_probe() to avoid printing spurious warnings on probe deferral. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220301111831.3742383-2-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22regulator: da9121: Remove surplus DA9141 parametersAdam Ward
Remove ramp_delay/enable_time values - subject to OTP, incorrect Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/a175201b4a7ea323c6a70d77f7f6d2124bfc0bed.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22regulator: da9121: Fix DA914x voltage valueAdam Ward
Update DA9141/2 max voltage to match spec change Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/9d1ec5b6db70d27f56d05b8a0139fc0840f03e20.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22regulator: da9121: Fix DA914x current valuesAdam Ward
Update DA9141/2 ranges to correct errors Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/cd5732c5061ce49dcfbcebb306d12ba1664b4ea6.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08regulator: Add support for TPS6286xVincent Whitchurch
TI's TPS62864/TPS6286/TPS62868/TPS62869 are high-frequency synchronous step-down converters controlled via I2C. There are differences in the electrical characteristics and packaging between the variants, but the register interfaces are identical. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220204155241.576342-3-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08regulator: core: fix false positive in regulator_late_cleanup()Oliver Barta
The check done by regulator_late_cleanup() to detect whether a regulator is on was inconsistent with the check done by _regulator_is_enabled(). While _regulator_is_enabled() takes the enable GPIO into account, regulator_late_cleanup() was not doing that. This resulted in a false positive, e.g. when a GPIO-controlled fixed regulator was used, which was not enabled at boot time, e.g. reg_disp_1v2: reg_disp_1v2 { compatible = "regulator-fixed"; regulator-name = "display_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; gpio = <&tlmm 148 0>; enable-active-high; }; Such regulator doesn't have an is_enabled() operation. Nevertheless it's state can be determined based on the enable GPIO. The check in regulator_late_cleanup() wrongly assumed that the regulator is on and tried to disable it. Signed-off-by: Oliver Barta <oliver.barta@aptiv.com> Link: https://lore.kernel.org/r/20220208084645.8686-1-oliver.barta@aptiv.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08regulator: sy7636a: Remove requirement on sy7636a mfdAlistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-01-28regulator/rpi-panel-attiny: Use two transactions for I2C readDave Stevenson
The I2C to the Atmel is very fussy, and locks up easily on Pi0-3 particularly on reads. If running at 100kHz on Pi3, reading the ID register generally locks up the Atmel, but splitting the register select write and read into two transactions is reliable. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-10-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator/rpi-panel-attiny: Use the regmap cacheDave Stevenson
The I2C to the Atmel is very fussy, and locks up easily on Pi0-3 particularly on reads. The LCD power status is controlled solely by this driver, so rather than reading it back from the Atmel, use the regmap cache to avoid reading values. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-9-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Remove get_brightness hookDave Stevenson
The driver was implementing a get_brightness function that tried to read back the PWM setting of the display to report as the current brightness. The controller on the display does not support that, therefore we end up reporting a brightness of 0, and that confuses systemd's backlight service. Remove the hook so that the framework returns the current brightness automatically. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-8-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Add GPIO control for panel and touch resetsDave Stevenson
We need independent control of the resets for the panel&bridge, vs the touch controller. Expose the reset lines that are on the Atmel's port C via the GPIO API so that they can be controlled appropriately. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-7-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Convert to drive lines directlyDave Stevenson
The Atmel was doing a load of automatic sequencing of control lines, however it was combining the touch controller's reset with the bridge/panel control. Change to control the control signals directly rather than through the automatic POWERON control. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-6-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Ensure the backlight is off during probe.Dave Stevenson
The initial state of the Atmel is not defined, so ensure the backlight PWM is set to 0 by default. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-5-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Serialise operations.Dave Stevenson
The driver was using the regmap lock to serialise the individual accesses, but we really need to protect the timings of enabling the regulators, including any communication with the Atmel. Use a mutex within the driver to control overall accesses to the Atmel, instead of the regmap lock. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-4-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Handle I2C errors/timing to the AtmelDave Stevenson
The Atmel is doing some things in the I2C ISR, during which period it will not respond to further commands. This is particularly true of the POWERON command. Increase delays appropriately, and retry should I2C errors be reported. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-3-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-28regulator: rpi-panel: Register with a unique backlight nameDave Stevenson
There's no reason why 2 Raspberry Pi DSI displays can't be attached to a Pi Compute Module, so the backlight names need to be unique. Use the parent dev_name. It's not as readable, but is unique. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20220124220129.158891-2-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-24regulator: qcom_smd: fix for_each_child.cocci warningskernel test robot
drivers/regulator/qcom_smd-regulator.c:1318:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1321. Semantic patch information: False positives can be due to function calls within the for_each loop that may encapsulate an of_node_put. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Fixes: 14e2976fbabd ("regulator: qcom_smd: Align probe function with rpmh-regulator") CC: Konrad Dybcio <konrad.dybcio@somainline.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2201151210170.3051@hadrien Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-19regulator: MAX20086: add gpio/consumer.hRandy Dunlap
max20086-regulator.c needs <linux/gpio/consumer.h> for an enum, some macros, and a function prototype. (seen on ARCH=m68k) Adding this header file fixes multiple build errors: ../drivers/regulator/max20086-regulator.c: In function 'max20086_i2c_probe': ../drivers/regulator/max20086-regulator.c:217:26: error: storage size of 'flags' isn't known 217 | enum gpiod_flags flags; ../drivers/regulator/max20086-regulator.c:261:27: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'? 261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; | ^~~~~~~~~~~~~~ ../drivers/regulator/max20086-regulator.c:261:44: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? 261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; ../drivers/regulator/max20086-regulator.c:262:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] 262 | chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags); ../drivers/regulator/max20086-regulator.c:217:26: warning: unused variable 'flags' [-Wunused-variable] 217 | enum gpiod_flags flags; Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Watson Chow <watson.chow@avnet.com> Cc: Mark Brown <broonie@kernel.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220115033603.24473-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-11regulator: max20086: fix error code in max20086_parse_regulators_dt()Dan Carpenter
This code accidentally returns PTR_ERR(NULL) which is success. It should return a negative error code. Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220111072657.GK11243@kili Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-07regulator: Add MAX20086-MAX20089 driverWatson Chow
The MAX20086-MAX20089 are dual/quad power protectors for cameras. Add a driver that supports controlling the outputs individually. Additional features, such as overcurrent detection, may be added later if needed. Signed-off-by: Watson Chow <watson.chow@avnet.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220106224350.16957-3-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-06regulator: qcom_smd: Align probe function with rpmh-regulatorKonrad Dybcio
The RPMh regulator driver is much newer and gets more attention, which in consequence makes it do a few things better. Update qcom_smd-regulator's probe function to mimic what rpmh-regulator does to address a couple of issues: - Probe defer now works correctly, before it used to, well, kinda just die.. This fixes reliable probing on (at least) PM8994, because Linux apparently cannot deal with supply map dependencies yet.. - Regulator data is now matched more sanely: regulator data is matched against each individual regulator node name and throwing an -EINVAL if data is missing, instead of just assuming everything is fine and iterating over all subsequent array members. - status = "disabled" will now work for disabling individual regulators in DT. Previously it didn't seem to do much if anything at all. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20211230023442.1123424-1-konrad.dybcio@somainline.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-04regulator: remove redundant ret variableMinghao Chi
Return value from regmap_update_bits() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Link: https://lore.kernel.org/r/20220104104139.601031-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-24regulator: qcom-labibb: OCP interrupts are not a failure while disabledMarijn Suijten
Receiving the Over-Current Protection interrupt while the regulator is disabled does not count as unhandled/failure (IRQ_NONE, or 0 as it were) but a "fake event", usually due to inrush as the is regulator about to be enabled. Fixes: 390af53e0411 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20211224113450.107958-1-marijn.suijten@somainline.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-15regulator: Introduce tps68470-regulator driverHans de Goede
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in the kernel the Regulators and Clocks are controlled by an OpRegion driver designed to work with power control methods defined in ACPI, but some platforms lack those methods, meaning drivers need to be able to consume the resources of these chips through the usual frameworks. This commit adds a driver for the regulators provided by the tps68470, and is designed to bind to the platform_device registered by the intel_skl_int3472 module. This is based on this out of tree driver written by Intel: https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/regulator/tps68470-regulator.c with various cleanups added. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211203102857.44539-6-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-13drivers/regulator: remove redundant ret variableMinghao Chi
Return value from twlreg_write() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20211213021655.435423-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-01regulator: qcom-rpmh: Add support for PM8450 regulatorsVinod Koul
Add the rpmh regulators found in PM8450 PMIC Signed-off-by: Vinod Koul <vkoul@kernel.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211201072515.3968843-3-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-30regulator: da9121: Add DA914x supportAdam Ward
Add the DA9141 and DA9142 regulators device recognition data and operational parameters. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/5f5b9b02f07578cd36c6bc266349a56efc9b08d1.1638223185.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-30regulator: da9121: Prevent current limit change when enabledAdam Ward
Prevent changing current limit when enabled as a precaution against possibile instability due to tight integration with switching cycle Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/52ee682476004a1736c1e0293358987319c1c415.1638223185.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29regulator: qcom-rpmh: Add PMG1110 regulatorsSatya Priya
Add support for PMG1110 regulators. Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Link: https://lore.kernel.org/r/1637668167-31325-3-git-send-email-quic_c_skakit@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-26regulator: qcom_spmi: Add pm8226 regulatorsDominik Kobinski
The PM8226 PMIC is very often seen on MSM8x26 boards. Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211123181119.2897-1-dominikkobinski314@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-24regulator: irq_helper: Provide helper for trivial IRQ notificationsMatti Vaittinen
Provide a generic map_event helper for regulators which have a notification IRQ with single, well defined purpose. Eg, IRQ always indicates exactly one event for exactly one regulator device. For such IRQs the mapping is trivial. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/603b7ed1938013a00371c1e7ccc63dfb16982b87.1637736436.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-18regulator: bd718x7: Use rohm generic restricted voltage settingMatti Vaittinen
Use common restricted voltage setting instead of implementing own. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/5a0ee14852802690241568a29ed19ff9550b0b08.1637233864.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-18regulator: rohm-regulator: add helper for restricted voltage settingMatti Vaittinen
Few ROHM PMICs have regulators where voltage setting can be done only when regulator is disabled. Add helper for those PMICs. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/6f51871e9fea611d133b5dd2560f4a7ee1ede9cd.1637233864.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-16regulator: da9121: Emit only one error message in .remove()Uwe Kleine-König
When an i2c remove callback fails, the i2c core emits a generic error message and still removes the device. Apart from the message there the return value isn't further used. So don't return an error code after having already emitted a driver specific warning about the problem to prevent two messages about the same issue. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211116110951.1213566-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-08Merge tag 'mfd-next-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Removed Drivers: - Remove support for TI TPS80031/TPS80032 PMICs New Device Support: - Add support for Magnetic Reader to TI AM335x - Add support for DA9063_EA to Dialog DA9063 - Add support for SC2730 PMIC to Spreadtrum SC27xx - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI - Add support for lots of new PMICS in QCom SPMI PMIC - Add support for ADC to Diolan DLN2 New Functionality: - Add support for Power Off to Rockchip RK817 Fix-ups: - Simplify Regmap passing to child devices in hi6421-spmi-pmic - SPDX licensing updates in ti_am335x_tscadc - Improve error handling in ti_am335x_tscadc - Expedite clock search in ti_am335x_tscadc - Generic simplifications in ti_am335x_tscadc - Use generic macros/defines in ti_am335x_tscadc - Remove unused code in ti_am335x_tscadc, cros_ec_dev - Convert to GPIOD in wcd934x - Add namespacing in ti_am335x_tscadc - Restrict compilation to relevant arches in intel_pmt - Provide better description/documentation in exynos_lpass - Add SPI device ID table in altera-a10sr, motorola-cpcap, sprd-sc27xx-spi - Change IRQ handling in qcom-pm8xxx - Split out I2C and SPI code in arizona - Explicitly include used headers in altera-a10sr - Convert sysfs show() function to in sysfs_emit - Standardise *_exit() and *_remove() return values in mc13xxx, stmpe, tps65912 - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc, qcom-spmi-pmic, max77686-private - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic Bug Fixes: - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core - Fix IRQ trigger type in sec-irq, max77693, max14577 - Repair off-by-one in altera-sysmgr - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C" * tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits) mfd: simple-mfd-i2c: Select MFD_CORE to fix build error mfd: tps80031: Remove driver mfd: max77686: Correct tab-based alignment of register addresses mfd: wcd934x: Replace legacy gpio interface for gpiod dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible mfd: dln2: Add cell for initializing DLN2 ADC mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo mfd: qcom-spmi-pmic: Document ten more PMICs in the binding mfd: qcom-spmi-pmic: Sort compatibles in the driver mfd: qcom-spmi-pmic: Sort the compatibles in the binding mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit mfd: altera-a10sr: Include linux/module.h mfd: tps65912: Make tps65912_device_exit() return void mfd: stmpe: Make stmpe_remove() return void mfd: mc13xxx: Make mc13xxx_common_exit() return void dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema dt-bindings: mfd: syscon: Add rk3368 QoS register compatible mfd: arizona: Split of_match table into I2C and SPI versions ...
2021-11-05Merge branches 'ib-mfd-iio-touchscreen-clk-5.16', ↵Lee Jones
'ib-mfd-misc-regulator-5.16' and 'tb-mfd-from-regulator-5.16' into ibs-for-mfd-merged
generated by cgit (git 2.34.1) at 2024-06-24 11:14:34 +0000