summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)Author
2016-12-30Revert "remoteproc: Merge table_ptr and cached_table pointers"Bjorn Andersson
Following any fw_rsc_vdev entries in the resource table are two variable length arrays, the first one reference vring resources and the second one is the virtio config space. The virtio config space is used by virtio to communicate status and configuration changes and must as such be shared with the remote. The reverted commit incorrectly made any changes to the virtio config space only affect the local copy, in an attempt to allowing memory protection of the shared resource table. This reverts commit cda8529346935fc86f476999ac4fbfe4e17abf11. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-30remoteproc: fix vdev reference managementLoic Pallardy
Commit 2b45cef5868a ("remoteproc: Further extend the vdev life cycle") extends kref support for vdev management. It introduces a regression when following sequence is executed: rproc_boot --> rproc_shutdown --> rproc_boot Second rproc_boot call crashes on register_virtio_device as device is already existing. Issue is previous vdev is never released when rproc is stop because associated refcount is too high. kref_get introduces is not needed as kref_init already initializes krefcount to 1 because it considers associated variable as used. This introduces a misalignment between kref_get and kref_put calls. Fixes: 2b45cef5868a ("remoteproc: Further extend the vdev life cycle") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09remoteproc: qcom_adsp_pil: select qcom_scmArnd Bergmann
The adsp-pil driver relies on SCM and causes a build error without it: ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This adds a 'select', as SCM is a silent Kconfig symbol that gets enabled implicitly by all its users. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09remoteproc: Drop wait in __rproc_boot()Bjorn Andersson
In the event that rproc_boot() is called before the firmware loaded completion has been flagged it will wait with the mutex held, obstructing the request_firmware_nowait() callback from completing the wait. As rproc_fw_config_virtio() has been reduced to only triggering auto-boot there is no longer a reason for waiting in rproc_boot(), so drop this. Cc: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09remoteproc/ste: Delete unused driverJean Delvare
Back in July 2014 I asked around what was the intended target platform for the STE Modem remoteproc driver, so that I could add the proper hardware dependency to its config option. The answer I got was that there was no known publicly available hardware needing it and it was unlikely that there ever would. So I think it's time to delete this driver to lower the maintenance burden. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Suman Anna <s-anna@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09remoteproc: Remove "experimental" warningBjorn Andersson
Warning users that remoteproc and it's binary format are under development doesn't serve much of a purpose. Different drivers support different image formats and the resource table has a version field that would need to be bumped when incompatible changes are introduced. So lets drop this warning to clean up the kernel log. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09remoteproc: qcom_adsp_pil: select qcom_scmArnd Bergmann
The adsp-pil driver relies on SCM and causes a build error without it: ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This adds a 'select', as SCM is a silent Kconfig symbol that gets enabled implicitly by all its users. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-02remoteproc: qcom: mdt_loader: add include for sizesStanimir Varbanov
Add linux/sizes.h to prevent build failure on non ARM architectures as: CC [M] drivers/remoteproc/qcom_mdt_loader.o In file included from include/linux/cache.h:4:0, from include/linux/printk.h:8, from include/linux/kernel.h:13, from include/asm-generic/bug.h:13, from arch/x86/include/asm/bug.h:35, from include/linux/bug.h:4, from include/linux/thread_info.h:11, from arch/x86/include/asm/elf.h:7, from include/linux/elf.h:4, from drivers/remoteproc/qcom_mdt_loader.c:18: drivers/remoteproc/qcom_mdt_loader.c: In function ‘qcom_mdt_parse’: drivers/remoteproc/qcom_mdt_loader.c:90:52: error: ‘SZ_4K’ undeclared (first use in this function) Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-19remoteproc: Update last rproc_put users to rproc_freeBjorn Andersson
The transition from rproc_put to rproc_free raced with the review of the Qualcomm ADSP and ST SLIMproc drivers and these where not updated accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-19remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLEBjorn Andersson
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-18remoteproc: wcnss-pil: add QCOM_SMD dependencyArnd Bergmann
When qcom_smd is a loadable module and wcnss-pil is built-in, we get a link error: drivers/remoteproc/qcom_wcnss_pil.o: In function `wcnss_smd_remove': qcom_wcnss_iris.c:(.text.wcnss_smd_remove+0x10): undefined reference to `qcom_smd_unregister_edge' drivers/remoteproc/qcom_wcnss_pil.o: In function `wcnss_smd_probe': qcom_wcnss_iris.c:(.text.wcnss_smd_probe+0x12): undefined reference to `qcom_smd_register_edge' This adds a Kconfig dependency to avoid this. We can still allow build-testing with SMD disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-16remoteproc: Add support for xo clockSarangdhar Joshi
Add xo clock support required to boot up Qualcomm ADSP processor. The ADSP remoteproc driver keeps xo clock enabled until the driver receives "handover" irq, in order to allow ADSP processor to vote for xo clock with rpm. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-16remoteproc: adsp-pil: fix recursive dependencyArnd Bergmann
The newly added driver tries to 'select' a symbol that it has an implicit dependency on, which confuses Kconfig: subsection "Kconfig recursive dependency limitations" drivers/remoteproc/Kconfig:3: symbol REMOTEPROC is selected by QCOM_ADSP_PIL As REMOTEPROC is itself user-visible, we clearly should not select it from a driver, removing the line fixes the problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-16Merge branch 'topic/st_fdma' of ↵Bjorn Andersson
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma into rproc-next
2016-11-15remoteproc: Introduce Qualcomm ADSP PILBjorn Andersson
The Qualcomm ADSP Peripheral Image Loader is used on a variety of different Qualcomm platforms for loading firmware into and controlling the Hexagon based ADSP. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: qcom_wcnss: Fix circular module dependencyBjorn Andersson
The tie between the main WCNSS driver and the IRIS driver causes a circular dependency between the two modules. Neither part makes sense to have on their own so lets merge them into one module. For the sake of picking up the clock and regulator resources described in the iris of_node we need an associated struct device. But, to keep the size of the patch down we continue to represent the IRIS part as its own platform_driver, within the same module, rather than setting up a dummy device. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: Merge table_ptr and cached_table pointersBjorn Andersson
As all vdev resources are allocated before we boot the remote processor we no longer need to support modifying the resource table while the remote is running. This saves us from the table_ptr dance, but more importantly allow the remote processor to enable security lock down of the loaded table memory region. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: Remove custom vdev handler listBjorn Andersson
The vdev handler is now just another resource allocator, so handle all resource types in a single pass. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: Update max_notifyid as we allocate vringsBjorn Andersson
Vrings are now allocated as we parse the resource table, before we boot the rproc or register any virtio devices, so it's safe to bump max_notifyid as part of this process. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: Decouple vdev resources and devicesBjorn Andersson
Represent the virtio device part of the vdev resources as remoteproc subdevices to finalize the decoupling of the virtio resource and device handling. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: Further extend the vdev life cycleBjorn Andersson
Tie the vdev (and hence vring) life cycle to the resource parsing and resource cleanup operations, allowing us to safely register and unregister virtio devices on the go. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: virtio: Anchor vring life cycle in vdevBjorn Andersson
Instead of having the vrings being allocated and freed as they are requested by the virtio device tie their life cycle to the vdev resource. This allows us to decouple the vdev resource management from the virtio device management. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: Assign kref to rproc_vdevBjorn Andersson
No functional change Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-14remoteproc: wcnss: Bond SMD edge to remoteprocBjorn Andersson
Allow the wcnss smd edge to be described as a child of the wcnss remoteproc node and make the edge life cycle follow the running state of the remoteproc. This bond is necessary to clean up the smd state when the remote processor is suddenly removed, and in some cases even when it shut down in a controlled fasion. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-09remoteproc: Introduce subdevicesBjorn Andersson
A subdevice is an abstract entity that can be used to tie actions to the booting and shutting down of a remote processor. The subdevice object is expected to be embedded in concrete implementations, allowing for a variety of use cases to be implemented. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-31remoteproc: st: Fix error return code in st_rproc_probe()Wei Yongjun
Fix to return a negative error code from the st_rproc_state() error handling case instead of 0, as done elsewhere in this function. Fixes: 63edb0310a5c ("remoteproc: Supply controller driver for ST's Remote Processors") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-31remoteproc: debugfs: Remove state entry which is duplicated is sysfsMatt Redfearn
Since there is now an always available state file in sysfs with the same function as this one in debugfs, remove the redundant entry. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-31remoteproc: Add a sysfs interface for firmware and stateMatt Redfearn
This patch adds a sysfs interface to rproc allowing the firmware name and processor state to be changed dynamically. State was previously available in debugfs, and is replicated here. The firmware file allows retrieval of the running firmware name, and a new one to be specified at run time, so long as the remote processor has been stopped. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-18remoteproc: qcom: wcnss_iris: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/remoteproc/qcom_wcnss_iris.ko | grep alias $ After this patch: $ modinfo drivers/remoteproc/qcom_wcnss_iris.ko | grep alias alias: of:N*T*Cqcom,wcn3680C* alias: of:N*T*Cqcom,wcn3680 alias: of:N*T*Cqcom,wcn3660C* alias: of:N*T*Cqcom,wcn3660 alias: of:N*T*Cqcom,wcn3620C* alias: of:N*T*Cqcom,wcn3620 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-18remoteproc: qcom: wcnss: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/remoteproc/qcom_wcnss.ko | grep alias $ After this patch: $ modinfo drivers/remoteproc/qcom_wcnss.ko | grep alias alias: of:N*T*Cqcom,pronto-v2-pilC* alias: of:N*T*Cqcom,pronto-v2-pil alias: of:N*T*Cqcom,pronto-v1-pilC* alias: of:N*T*Cqcom,pronto-v1-pil alias: of:N*T*Cqcom,riva-pilC* alias: of:N*T*Cqcom,riva-pil Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-18remoteproc: qcom: q6v5_pil: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/remoteproc/qcom_q6v5_pil.ko | grep alias $ After this patch: $ modinfo drivers/remoteproc/qcom_q6v5_pil.ko | grep alias alias: of:N*T*Cqcom,q6v5-pilC* alias: of:N*T*Cqcom,q6v5-pil Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-18remoteproc: Keep local copy of firmware nameMatt Redfearn
Storage of the firmware name was inconsistent, either storing a pointer to a name stored with unknown ownership, or a variable length tacked onto the end of the struct proc allocated in rproc_alloc. In preparation for allowing the firmware of an already allocated struct rproc to be changed, instead always keep a locally maintained copy of the firmware name. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-18remoteproc: Update Kconfig setup to 'depends on REMOTEPROC'Peter Griffin
Make REMOTEPROC core a selectable kconfig option, and update remoteproc client drivers to 'depends on' the core. This avoids some nasty Kconfig recursive dependency issues. Also when using menuconfig client drivers will be hidden until the core has been enabled. Documentation/kbuild/kconfig-language.txt: Note: select should be used with care. select will force a symbol to a value without visiting the dependencies. By abusing select you are able to select a symbol FOO even if FOO depends on BAR that is not set. In general use select only for non-visible symbols (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18remoteproc: st_slim_rproc: add a slimcore rproc driverPeter Griffin
slim core is used as a basis for many IPs in the STi chipsets such as fdma and demux. To avoid duplicating the elf loading code in each device driver a slim rproc driver has been created. This driver is designed to be used by other device drivers such as fdma, or demux whose IP is based around a slim core. The device driver can call slim_rproc_alloc() to allocate a slim rproc and slim_rproc_put() when finished. This driver takes care of ioremapping the slim registers (dmem, imem, slimcore, peripherals), whose offsets and sizes can change between IP's. It also obtains and enables any clocks used by the device. This approach avoids having a double mapping of the registers as slim_rproc does not register its own platform device. It also maps well to device tree abstraction as it allows us to have one dt node for the whole device. All of the generic rproc elf loading code can be reused, and we provide start() stop() hooks to start and stop the slim core once the firmware has been loaded. This has been tested successfully with fdma driver. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-06Merge tag 'rpmsg-v4.9' of git://github.com/andersson/remoteprocLinus Torvalds
Pull rpmsg updates from Bjorn Andersson: "The bulk of these patches involve splitting the rpmsg implementation into a framework/API part and a virtio specific backend part. It then adds the Qualcomm Shared Memory Device (SMD) as an additional supported wire format. Also included is a set of code style cleanups that have been lingering for a while" * tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc: (26 commits) rpmsg: smd: fix dependency on QCOM_SMD=n rpmsg: Introduce Qualcomm SMD backend rpmsg: Allow callback to return errors rpmsg: Move virtio specifics from public header rpmsg: virtio: Hide vrp pointer from the public API rpmsg: Hide rpmsg indirection tables rpmsg: Split rpmsg core and virtio backend rpmsg: Split off generic tail of create_channel() rpmsg: Move helper for finding rpmsg devices to core rpmsg: Move endpoint related interface to rpmsg core rpmsg: Indirection table for rpmsg_endpoint operations rpmsg: Move rpmsg_device API to new file rpmsg: Introduce indirection table for rpmsg_device operations rpmsg: Clean up rpmsg device vs channel naming rpmsg: Make rpmsg_create_ept() take channel_info struct rpmsg: rpmsg_send() operations takes rpmsg_endpoint rpmsg: Name rpmsg devices based on channel id rpmsg: Enable matching devices with drivers based on DT rpmsg: Drop prototypes for non-existing functions samples/rpmsg: add support for multiple instances ...
2016-10-02remoteproc: Refactor rproc module lockingBjorn Andersson
Lock the implementation as we hand out references to client drivers rather than when they try to boot the remote processor. This allows auto-booting remote processors to be shut down by unloading their module, in addition to first unbinding them. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-02remoteproc: Split driver and consumer dereferencingBjorn Andersson
In order to be able to lock a rproc driver implementations only when used by a client, we must differ between the dereference operation of a client and the implementation itself. This patch brings no functional change. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-10-02remoteproc: Correct resource handling upon boot failureBjorn Andersson
The freeing of resources will attempt to clear values previously set in the cached resource table, so make sure to free the table after we have cleaned up the resources. Fixes: 988d204cdaf6 ("remoteproc: Move handling of cached table to boot/shutdown") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-19remoteproc: Drop unnecessary NULL checkBjorn Andersson
rproc_alloc() will make sure that the "firmware" pointer is either a driver supplied value or pointing to a generated firmware filename, it can't be NULL. So drop the extra check in the rproc_boot() path. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-08rpmsg: Move rpmsg_device API to new fileBjorn Andersson
Extract the now indirect rpmsg_create_ept() interface to a separate file and start building up a rpmsg core. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-06remoteproc: core: transform struct fw_rsc_vdev_vring reserved field in paLoic PALLARDY
In current implementation, struct fw_rsc_vdev_vring which describes vring resource in firmware resource table owns only device address, because it assumes that host is responsible of vring allocation and only device address is needed by coprocessor. But if vrings need to be fixed in system memory map for any reasons (security, SoC charactieristics...), physical address is needed exatly identified the memory chunck by host. For that let's transform reserved field of struct fw_rsc_vdev_vring to pa (physical address). Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-22remoteproc: qcom: wcnss: Fix return value check in wcnss_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-18remoteproc: qcom: Introduce WCNSS peripheral image loaderBjorn Andersson
This introduces the peripheral image loader, for loading WCNSS firmware and boot the core on e.g. MSM8974. The firmware is verified and booted with the help of the Peripheral Authentication System (PAS) in TrustZone. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-18remoteproc: Only update table_ptr if we have a loaded tableBjorn Andersson
In the case that we have a resource table, but not a loaded one we should leave the table_ptr intact, as subsequent resource handling could otherwise dereference the NULL pointer. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-17remoteproc: Move handling of cached table to boot/shutdownBjorn Andersson
As we moved the vdev handling to the main boot/shutdown code path we can further simplify the resource table handling by moving the parsing spet to boot as well. The lifespan of the resource table is changed to live from rproc_boot() to rproc_shutdown(). Cc: Lee Jones <lee.jones@linaro.org> Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-17remoteproc: Move vdev handling to boot/shutdownBjorn Andersson
The newly introduced "always-on" flag allows us to stop giving the vdevs special treatment. The ordering of resource allocation and life cycle of the remote processor is kept intact. This allows us to mark a remote processor with vdevs to not boot unless explicitly requested to do so by a client driver. Cc: Lee Jones <lee.jones@linaro.org> Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-17remoteproc: Calculate max_notifyid during loadBjorn Andersson
The calculation of max_notifyid must only be done before we call start() on the remoteproc drivers, so move the calculation to be part of the loading steps. Cc: Lee Jones <lee.jones@linaro.org> Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-17remoteproc: Introduce auto-boot flagBjorn Andersson
Introduce an "auto-boot" flag on rprocs to make it possible to flag remote processors without vdevs to automatically boot once the firmware is found. Preserve previous behavior of the wkup_m3 processor being explicitly booted by a consumer. Cc: Lee Jones <lee.jones@linaro.org> Cc: Loic Pallardy <loic.pallardy@st.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-12remoteproc/omap: revise a minor error trace messageAnna, Suman
The omap_mbox_msg_send() is the legacy API for sending a mailbox message. It has been replaced with the mbox_send_message() from the mailbox framework. Revise the failure trace to print a generic failure message instead of referencing the actual function name. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-12remoteproc/omap: fix various code formatting issuesAnna, Suman
This patch fixes some of the existing checkpatch warnings in OMAP remoteproc code. The fixes are to the following warnings: 1. WARNING: missing space after return type 2. WARNING: Unnecessary space after function pointer name 3. CHECK: Alignment should match open parenthesis Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>