summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)Author
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-29remoteproc: q6v5: Allow defining GLINK edge for mss remoteprocSibi Sankar
Add GLINK subdevice to allow definition of GLINK edge as a child of modem-pil. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-29remoteproc: q6v5: Add support for mss remoteproc on SDM845Sibi Sankar
From SDM845, the Q6SS reset sequence on software side has been simplified with the introduction of boot FSM which assists in bringing the Q6 out of reset. SDM845 brings a new reset signal ALT_RESET which is a part of the MSS subsystem hence requires reset clks to be enabled before assert/deassert. Use the SoC specific reset helper function to add support for ALT_RESET in SDM845. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-29remoteproc: q6v5: Introduce reset assert/deassert helper functionsSibi Sankar
Adding reset assert/deassert helper functions to handle SoC specific reset sequences. This wil be used by SDM845 to assert and deassert ALT_RESET and MSS_RESET signals. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-21remoteproc: q6v5: Move proxy unvote to handover irq handlerSibi Sankar
Introduce interrupt handler for smp2p ready interrupt to handle start completion. Move the proxy votes for clocks and regulators to the handover interrupt context. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [bjorn: Only proxy unvote if handover irq has not fired] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-21remoteproc: q6v5: Return irq from q6v5_request_irq()Bjorn Andersson
q6v5_request_irq() was supposed to return the irq number, but ret is overwritten by the request_irq(), fix this and return the IRQ on success. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09remoteproc/davinci: use octal permissions for module_param()Bartosz Golaszewski
Checkpatch recommends to use octal perms instead of S_IRUGO. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09remoteproc/davinci: prepare and unprepare the clock where neededBartosz Golaszewski
We're currently switching the platform to using the common clock framework. We need to explicitly prepare and unprepare the rproc clock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Suman Anna <s-anna@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09remoteproc/davinci: add the missing retval check for clk_enable()Bartosz Golaszewski
The davinci platform is being switched to using the common clock framework, where clk_enable() can fail. Add the return value check. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Suman Anna <s-anna@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09Merge tag 'v4.17-rc4' into rproc-nextBjorn Andersson
Pick up fixes from rproc-v4.17-1 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25remoteproc: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25remoteproc: qcom: Fix potential device node leaksTobias Jordan
Add missing of_node_put()s at two places for device nodes returned by of_parse_phandle(). Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25remoteproc: fix crashed parameter logic on stop callArnaud Pouliquen
Fix rproc_add_subdev parameter name and inverse the crashed logic. Fixes: 880f5b388252 ("remoteproc: Pass type of shutdown to subdev remove") Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-17remoteproc: Prevent incorrect rproc state on xfer mem ownership failureSibi Sankar
Any failure in the secure call for transferring mem ownership of mba region to Q6 would result in reporting that the remoteproc device is running. This is because the previous q6v5_clk_enable would have been a success. Prevent this by updating variable 'ret' accordingly. Cc: stable@vger.kernel.org Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-05remoteproc: fix null pointer dereference on glink only platformsSibi Sankar
Currently calling list_del on smd subdev remove path results in null pointer dereference on glink only platforms. Fix this by adding safety checks in glink/smd subdev remove paths. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27soc: qcom: qmi: add CONFIG_NET dependencyArnd Bergmann
Access to the socket API and the root network namespace is only available when networking is enabled: ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! Adding a dependency on CONFIG_NET lets us build it in all randconfig builds. Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder") Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-18remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'Christophe JAILLET
We can return directly at the beginning of the function and save the 'err' label. We can also explicitly return 0 when the probe succeed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-18remoteproc: imx_rproc: Re-use existing error handling path in ↵Christophe JAILLET
'imx_rproc_probe()' Avoid some code ducplication and be more future-proof. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-18remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'Christophe JAILLET
If 'of_device_get_match_data()' fails, we must undo the previous 'rproc_alloc()' call. Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Introduce sysmonBjorn Andersson
The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Pass type of shutdown to subdev removeBjorn Andersson
remoteproc instances can be stopped either by invoking shutdown or by an attempt to recover from a crash. For some subdev types it's expected to clean up gracefully during a shutdown, but are unable to do so during a crash - so pass this information to the subdev remove functions. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Register segments for core dumpSarangdhar Joshi
Register MDT segments with the remoteproc core dump functionality in order to include them in a core dump, in case of a recovery of the remote processor. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12soc: qcom: mdt-loader: Return relocation baseBjorn Andersson
In order to implement support for grabbing core dumps in remoteproc it's necessary to know the relocated base of the image, as the offsets from the virtual memory base might not be based on the physical address. Return the adjusted physical base address to the caller. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Rename "load_rsc_table" to "parse_fw"Bjorn Andersson
The resource table is just one possible source of information that can be extracted from the firmware file. Generalize this interface to allow drivers to override this with parsers of other types of information. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Add remote processor coredump supportSarangdhar Joshi
As the remoteproc framework restarts the remote processor after a fatal event, it's useful to be able to acquire a coredump of the remote processor's state, for post mortem debugging. This patch introduces a mechanism for extracting the memory contents after the remote has stopped and before the restart sequence has begun in the recovery path. The remoteproc framework builds the core dump in memory and use devcoredump to expose this to user space. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> [bjorn: Use vmalloc instead of composing the ELF on the fly] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Remove null character write of shared memJitendra Sharma
remoteproc is writing '\0' in the shared mem region. This region is shared among multiple clients that are also trying to read. Hence they miss first character. Remove this null character write, as this mem area is supposed to be Read only. Further during every subsystem reboot, this region is initialized with default, hence no need to write this region. Signed-off-by: Jitendra Sharma <shajit@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-05Merge tag 'rproc-v4.16' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This contains a few bug fixes and a cleanup up of the resource-table handling in the framework, which removes the need for drivers with no resource table to provide a fake one" * tag 'rproc-v4.16' of git://github.com/andersson/remoteproc: remoteproc: Reset table_ptr on stop remoteproc: Drop dangling find_rsc_table dummies remoteproc: Move resource table load logic to find remoteproc: Don't handle empty resource table remoteproc: Merge rproc_ops and rproc_fw_ops remoteproc: Clone rproc_ops in rproc_alloc() remoteproc: Cache resource table size remoteproc: Remove depricated crash completion virtio_remoteproc: correct put_device virtio_device.dev
2018-01-15remoteproc: Reset table_ptr on stopBjorn Andersson
The installed resource table is no longer accessible after stopping the remote, so update table_ptr to point to the local copy. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Drop dangling find_rsc_table dummiesBjorn Andersson
As the core now deals with the lack of a resource table, remove the dangling custom dummy implementations of find_rsc_table from drivers. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Move resource table load logic to findBjorn Andersson
Extend the previous operation of finding the resource table in the ELF with the extra step of populating the rproc struct with a copy and the size. This allows drivers to override the mechanism used for acquiring the resource table, or omit it for firmware that is known not to have a resource table. This leaves the custom, dummy, find_rsc_table implementations found in some drivers dangling. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Don't handle empty resource tableBjorn Andersson
Allow a NULL table_ptr to have the same meaning as a table with 0 entries, allowing a subsequent patch to skip the assignment step. A few other places in the implementation does dereference table_ptr, but they are currently all coming from rproc_handle_resources(). Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Merge rproc_ops and rproc_fw_opsBjorn Andersson
There are currently a few different schemes used for overriding fw_ops or parts of fw_ops. Merge fw_ops into rproc_ops and expose the default ELF-loader symbols so that they can be assigned by the drivers. To keep backwards compatibility with the "default" case, a driver not specifying the "load" operation is assumed to want the full ELF-loader suit of functions. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Clone rproc_ops in rproc_alloc()Bjorn Andersson
In order to allow rproc_alloc() to, in a future patch, update entries in the "ops" struct we need to make a local copy of it. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Cache resource table sizeBjorn Andersson
We don't re-read the resource table during a recovery, so it is possible in the recovery path that the resource table has a different size than cached_table. Store the original size of cached_table to avoid these getting out of sync. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Remove depricated crash completionBjorn Andersson
The crash handling now happens in a single execution context, so there's no longer a need for a completion to synchronize this. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-02virtio_remoteproc: correct put_device virtio_device.devweiping zhang
rproc_virtio_dev_release will be called iff virtio_device.dev's reference count drops to 0. Here we just put vdev.dev, and then rproc->dev's cleanup will be done in rproc_virtio_dev_release. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-28remoteproc: qcom: Use PTR_ERR_OR_ZERO() in glink probVasyl Gomonovych
Fix ptr_ret.cocci warnings: drivers/remoteproc/qcom_common.c:60:8-14: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-17Merge tag 'rproc-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This adds an interface for configuring Qualcomm's "secure SMMU" and adds support for booting the modem Hexagon on MSM8996. Two new debugfs entries are added in the remoteproc core to introspect the list of memory carveouts and the loaded resource table" * tag 'rproc-v4.15' of git://github.com/andersson/remoteproc: remoteproc: qcom: Fix error handling paths in order to avoid memory leaks remoteproc: qcom: Drop pr_err in q6v5_xfer_mem_ownership() remoteproc: debug: add carveouts list dump feature remoteproc: debug: add resource table dump feature remoteproc: qcom: Add support for mss remoteproc on msm8996 remoteproc: qcom: Make secure world call for mem ownership switch remoteproc: qcom: refactor mss fw image loading sequence firmware: scm: Add new SCM call API for switching memory ownership
2017-11-17Merge tag 'rpmsg-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds
Pull rpmsg updates from Bjorn Andersson: - turn RPMSG_VIRTIO into a user selectable config - fix few bugs in GLINK - provide the support for specifying initial buffer sizes for GLINK channels. * tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc: rpmsg: glink: The mbox client knows_txdone rpmsg: glink: Add missing MODULE_LICENSE rpmsg: glink: Use best fit intent during tx rpmsg: glink: Add support to preallocate intents dt-bindings: soc: qcom: Support GLINK intents rpmsg: glink: Initialize the "intent_req_comp" completion variable rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfig
2017-11-14remoteproc: qcom: Fix error handling paths in order to avoid memory leaksChristophe JAILLET
In case of error returned by 'q6v5_xfer_mem_ownership', we must free some resources before returning. In 'q6v5_mpss_init_image()', add a new label to undo a previous 'dma_alloc_attrs()'. In 'q6v5_mpss_load()', re-use the already existing error handling code to undo a previous 'request_firmware()', as already done in the other error handling paths of the function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-06remoteproc: qcom: Drop pr_err in q6v5_xfer_mem_ownership()Bjorn Andersson
The pr_err() in q6v5_xfer_mem_ownership() prints, upon failure, the memory range that failed to be transitioned. But on 32-bit architectures with CONFIG_PHYS_ADDR_T_64BIT set we cannot cast the phys_addr_t variable to a pointer, per below build error. Instead these should be formatted with %pap. In file included from include/linux/kernel.h:14:0, from include/linux/clk.h:16, from drivers/remoteproc/qcom_q6v5_pil.c:18: drivers/remoteproc/qcom_q6v5_pil.c: In function 'q6v5_xfer_mem_ownership': drivers/remoteproc/qcom_q6v5_pil.c:337:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] (void *)addr, (void *)(addr + size), ^ Most callers will upon failure print a specific error message describing which memory region that we failed to pass ownership of, so rather than fixing the format string this patch fixes up the last callers and drop the print from this function, saving us from spamming the log in most of these error cases. Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-06remoteproc: debug: add carveouts list dump featureLoic Pallardy
This patch offers the capability to dump memory carveouts associated to one remoteprocessor. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-06remoteproc: debug: add resource table dump featureLoic Pallardy
This patch adds the capability to display the content of the resource table associated to a remote processor firmware. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30remoteproc: qcom: Add support for mss remoteproc on msm8996Avaneesh Kumar Dwivedi
This patch add support for mss boot on msm8996. Major changes include initializing mss rproc for msm8996, making appropriate change for executing mss reset sequence etc. Tested-and-acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-10-30remoteproc: qcom: Make secure world call for mem ownership switchAvaneesh Kumar Dwivedi
MSS proc on msm8996 can not access fw loaded region without stage second translation of memory pages where mpss image are loaded. This patch in order to enable mss boot on msm8996 invoke scm call to switch or share ownership between apps and modem. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> [bjorn: Corrected error path in q6v5_start()] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-10-30remoteproc: qcom: refactor mss fw image loading sequenceAvaneesh Kumar Dwivedi
This patch refactor code to first load all firmware blobs and then update modem proc to authenticate and boot fw. Tested-and-acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-10-25rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfigAnup Patel
Currently, RPMSG_VIRTIO can only be enabled if some other kconfig option selects it. This does not allow it to be enabled for virtualized systems where Virtio RPMSG is available over Virtio MMIO or PCI transport. This patch updates RPMSG_VIRTIO kconfig option so that we can enable the VirtIO RPMSG driver via menuconfig or defconfig. The patch also removes "select RPMSG_VIRTIO" from various remoteproc kconfig options because it is now user selectable. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-10-11remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()Wei Yongjun
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-10-10remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependenciesArnd Bergmann
When RPMSG_QCOM_GLINK_SMEM=m and one driver causes the qcom_common.c file to be compiled as built-in, we get a link error: drivers/remoteproc/qcom_common.o: In function `glink_subdev_remove': qcom_common.c:(.text+0x130): undefined reference to `qcom_glink_smem_unregister' qcom_common.c:(.text+0x130): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_glink_smem_unregister' drivers/remoteproc/qcom_common.o: In function `glink_subdev_probe': qcom_common.c:(.text+0x160): undefined reference to `qcom_glink_smem_register' qcom_common.c:(.text+0x160): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_glink_smem_register' Out of the three PIL driver instances, QCOM_ADSP_PIL already has a Kconfig dependency to prevent this from happening, but the other two do not. This adds the same dependency there. Fixes: eea07023e6d9 ("remoteproc: qcom: adsp: Allow defining GLINK edge") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>