summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)Author
2020-03-08remoteproc: add IPA notification to q6v5 driverAlex Elder
Set up a subdev in the q6v5 modem remoteproc driver that generates event notifications for the IPA driver to use for initialization and recovery following a modem shutdown or crash. A pair of new functions provides a way for the IPA driver to register and deregister a notification callback function that will be called whenever modem events (about to boot, running, about to shut down, etc.) occur. A void pointer value (provided by the IPA driver at registration time) and an event type are supplied to the callback function. One event, MODEM_REMOVING, is signaled whenever the q6v5 driver is about to remove the notification subdevice. It requires the IPA driver de-register its callback. This sub-device is only used by the modem subsystem (MSS) driver, so the code that adds the new subdev and allows registration and deregistration of the notifier is found in "qcom_q6v6_mss.c". Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24remoteproc: qcom: q6v5-mss: Improve readability of reset_assertSibi Sankar
Define AXI_GATING_VALID_OVERRIDE and fixup comments to improve readability of Q6 modem reset sequence on SC7180 SoCs. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200123131236.1078-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-24remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeoutSibi Sankar
Replace the loop for HALT_ACK detection with regmap_read_poll_timeout. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200123131236.1078-2-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-21remoteproc: qcom: q6v5-mss: Rename boot status timeoutSibi Sankar
Rename the FSM timeout on SC7180 to BOOT_STATUS_TIMEOUT_US. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200117135130.3605-4-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-21remoteproc: qcom: q6v5-mss: Improve readability across clk handlingSibi Sankar
Define CLKEN and CLKOFF for improving readability of Q6SS clock handling. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200117135130.3605-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-20remoteproc: use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct fw_rsc_vdev { ... struct fw_rsc_vdev_vring vring[0]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*rsc) + rsc->num_of_vrings * sizeof(struct fw_rsc_vdev_vring) with: struct_size(rsc, vring, rsc->num_of_vrings) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20190830151406.GA23274@embeddedor Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-20remoteproc: Initialize rproc_class before useBrandon Maier
The remoteproc_core and remoteproc drivers all initialize with module_init(). However remoteproc drivers need the rproc_class during their probe. If one of the remoteproc drivers runs init and gets through probe before remoteproc_init() runs, a NULL pointer access of rproc_class's `glue_dirs` spinlock occurs. > Unable to handle kernel NULL pointer dereference at virtual address 000000dc > pgd = c0004000 > [000000dc] *pgd=00000000 > Internal error: Oops: 5 [#1] PREEMPT ARM > Modules linked in: > CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.14.106-rt56 #1 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > task: c6050000 task.stack: c604a000 > PC is at rt_spin_lock+0x40/0x6c > LR is at rt_spin_lock+0x28/0x6c > pc : [<c0523c90>] lr : [<c0523c78>] psr: 60000013 > sp : c604bdc0 ip : 00000000 fp : 00000000 > r10: 00000000 r9 : c61c7c10 r8 : c6269c20 > r7 : c0905888 r6 : c6269c20 r5 : 00000000 r4 : 000000d4 > r3 : 000000dc r2 : c6050000 r1 : 00000002 r0 : 000000d4 > Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none ... > [<c0523c90>] (rt_spin_lock) from [<c03b65a4>] (get_device_parent+0x54/0x17c) > [<c03b65a4>] (get_device_parent) from [<c03b6bec>] (device_add+0xe0/0x5b4) > [<c03b6bec>] (device_add) from [<c042adf4>] (rproc_add+0x18/0xd8) > [<c042adf4>] (rproc_add) from [<c01110e4>] (my_rproc_probe+0x158/0x204) > [<c01110e4>] (my_rproc_probe) from [<c03bb6b8>] (platform_drv_probe+0x34/0x70) > [<c03bb6b8>] (platform_drv_probe) from [<c03b9dd4>] (driver_probe_device+0x2c8/0x420) > [<c03b9dd4>] (driver_probe_device) from [<c03ba02c>] (__driver_attach+0x100/0x11c) > [<c03ba02c>] (__driver_attach) from [<c03b7d08>] (bus_for_each_dev+0x7c/0xc0) > [<c03b7d08>] (bus_for_each_dev) from [<c03b910c>] (bus_add_driver+0x1cc/0x264) > [<c03b910c>] (bus_add_driver) from [<c03ba714>] (driver_register+0x78/0xf8) > [<c03ba714>] (driver_register) from [<c010181c>] (do_one_initcall+0x100/0x190) > [<c010181c>] (do_one_initcall) from [<c0800de8>] (kernel_init_freeable+0x130/0x1d0) > [<c0800de8>] (kernel_init_freeable) from [<c051eee8>] (kernel_init+0x8/0x114) > [<c051eee8>] (kernel_init) from [<c01175b0>] (ret_from_fork+0x14/0x24) > Code: e2843008 e3c2203f f5d3f000 e5922010 (e193cf9f) > ---[ end trace 0000000000000002 ]--- Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> Link: https://lore.kernel.org/r/20190530225223.136420-1-brandon.maier@rockwellcollins.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-20rpmsg: add rpmsg support for mt8183 SCP.Pi-Hsun Shih
Add a simple rpmsg support for mt8183 SCP, that use IPI / IPC directly. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-4-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-20remoteproc/mediatek: add SCP support for mt8183Erin Lo
Provide a basic driver to control Cortex M4 co-processor Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-3-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-20remoteproc: mss: q6v5-mss: Add modem support on SC7180Sibi Sankar
Add the out of reset sequence support for modem sub-system on SC7180 SoCs. It requires access to an additional halt nav register to put the modem back into reset. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191219054506.20565-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-20remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI supportSibi Sankar
Add support for booting the Audio and Sensor DSPs found in Qualcomm's MSM8998 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191218132217.28141-4-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-20remoteproc: q6v5-mss: Remove mem clk from the active poolSibi Sankar
Currently the mem clk is voted upon from both the active and proxy pool on MSM8998 SoCs where only a proxy vote should suffice. Fix this by removing mem clk from the active pool. Fixes: 1665cbd5731fa ("remoteproc: qcom_q6v5_mss: Add support for MSM8998") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191218132217.28141-2-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-18remoteproc: qcom: Remove unneeded semicolonMa Feng
Fixes coccicheck warning: drivers/remoteproc/qcom_sysmon.c:397:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ma Feng <mafeng.ma@huawei.com> Link: https://lore.kernel.org/r/1576736376-114816-1-git-send-email-mafeng.ma@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-16remoteproc: qcom: pas: Add auto_boot flagSibi Sankar
Add auto_boot flag and set it to false for modem. This allows for the delayed boot up of modem after the dependencies are met in userspace. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/0101016e80790f6a-98fb016c-9639-4124-b6ee-fe7639af734f-000000@us-west-2.amazonses.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-16remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI supportSibi Sankar
Add support for booting the Modem, Audio, Compute and Sensor DSPs found on Qualcomm's SM8150 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/0101016e8078ecaa-5ec3bf83-d23a-4ebe-a9a4-a5d08c357ae3-000000@us-west-2.amazonses.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-16remoteproc: qcom: pas: Vote for active/proxy power domainsSibi Sankar
On SM8150 SoCs ADSP, CDSP and MPSS need to proxy vote on multiple rpmh ARC resources and active vote on QMP AOSS Power domains. Add support to vote for multiple active and proxy power domains. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/0101016e8078a71a-9ae99638-9e15-49a5-b769-85552526ae89-000000@us-west-2.amazonses.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-16remoteproc: qcom: pas: Disable interrupt on clock enable failureSibi Sankar
Disable handover smp2p interrupt on "xo" clock prepare enable failure. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/0101016e80787f5e-e7b2e8af-a398-4fb4-ae27-a5f251d1f9cc-000000@us-west-2.amazonses.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-18remoteproc: stm32: fix probe error caseFabien Dessenne
If the rproc driver is probed before the mailbox driver and if the rproc Device Tree node has some mailbox properties, the rproc driver probe shall be deferred instead of being probed without mailbox support. Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Link: https://lore.kernel.org/r/1573812188-19842-1-git-send-email-fabien.dessenne@st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-14remoteproc: stm32: wakeup the system by wdg irqFabien Dessenne
If the device node defines the 'wakeup-source' property, use the WDG exti IRQ as a wakeup source of the system. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Link: https://lore.kernel.org/r/1566833923-16718-3-git-send-email-fabien.dessenne@st.com [bjorn: Replace ifdef with __maybe_unused for suspend/resume functions] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-11remoteproc: Fix wrong rvring index computationClement Leger
Index of rvring is computed using pointer arithmetic. However, since rvring->rvdev->vring is the base of the vring array, computation of rvring idx should be reversed. It previously lead to writing at negative indices in the resource table. Signed-off-by: Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20191004073736.8327-1-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-08remoteproc: stm32: use workqueue to treat mailbox callbackArnaud Pouliquen
The mailbox callback is under interrupt context. A consequence is that RPMsg Callbacks are also in interrupt context. Create workqueue to treat the callbacks in normal context. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-08remoteproc: fix argument 2 of rproc_mem_entry_initBen Dooks (Codethink)
The rproc_mem_entry_init() call takes a pointer to a vm as the second argument. The code is currently using a plain 0 as "NULL". Change to using NULL to fix the following sparse warnings: drivers/remoteproc/remoteproc_core.c:339:49: warning: Using plain integer as NULL pointer drivers/remoteproc/remoteproc_core.c:916:46: warning: Using plain integer as NULL pointer Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-04remoteproc: qcom_q6v5_mss: Add support for MSM8998Jeffrey Hugo
MSM8998 sits between MSM8996 and SDM845 in terms of functionality needed to boot the modem subsystem. Booting mss allows for servicing the traditional cellular usecases along with the wireless usecases such as wifi. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-04remoteproc: debug: Remove unneeded NULL checkDing Xiang
debugfs_remove_recursive will do NULL check, so remove the redundant null check Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-04remoteproc: remove useless typedefClement Leger
rproc_handle_resources_t is not used anymore, remove it. Signed-off-by: Clement Leger <cleger@kalray.eu> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-09-22Merge tag 'rproc-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This exposes the remoteproc's name in sysfs, allows stm32 to enter platform standby and provides bug fixes for stm32 and Qualcomm's modem remoteproc drivers. Finally it updates MAINTAINERS to reflect the move to kernel.org" * tag 'rproc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: MAINTAINERS: remoteproc: update git tree location remoteproc: Remove dev_err() usage after platform_get_irq() remoteproc: stm32: manage the get_irq probe defer case remoteproc: stm32: clear MCU PDDS at firmware start remoteproc: qcom: q6v5-mss: fixup q6v5_pds_enable error handling remoteproc: Add a sysfs interface for name remoteproc: qcom: Move glink_ssr notification after stop
2019-09-04remoteproc: don't allow modular buildChristoph Hellwig
Remoteproc started using dma_declare_coherent_memory recently, which is a bad idea from drivers, and the maintainers agreed to fix that. But until that is fixed only allow building the driver built in so that we can remove the dma_declare_coherent_memory export and prevent other drivers from "accidentally" using it like remoteproc. Note that the driver would also leak the declared coherent memory on unload if it actually was built as a module at the moment. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26remoteproc: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-remoteproc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26remoteproc: stm32: manage the get_irq probe defer caseFabien Dessenne
Manage the -EPROBE_DEFER error case for "wdg" IRQ. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26remoteproc: stm32: clear MCU PDDS at firmware startFabien Dessenne
When remoteproc stops a firmware, it sets the MCU PDDS flag, allowing the platform to reach the Standby power mode if needed. Symmetrically, clear this flag before running a firmware. This fixes the issue where the system goes to Standby mode when the MCU crashes while MPU is in CSTOP mode. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26remoteproc: qcom: q6v5-mss: fixup q6v5_pds_enable error handlingSibi Sankar
dev_pm_domain_attach_by_name will return NULL if the requested power-domain is not a part device node. This could result in NULL pointer de-reference in q6v5_pds_enable. Fix this by checking for IS_ERR_OR_NULL and forward the appropriate error code. Fixes: 4760a896be88e ("remoteproc: q6v5-mss: Vote for rpmh power domains") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26remoteproc: Add a sysfs interface for nameSuman Anna
This patch adds a sysfs interface that provides the name of the remote processor to userspace. This allows the userspace to identify a remote processor as the remoteproc devices themselves are created based on probe order and can change from one boot to another or at runtime. The name is made available in debugfs originally, and is being retained for now. This can be cleaned up after couple of releases once users get familiar with the new interface. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-24remoteproc: qcom: Move glink_ssr notification after stopBjorn Andersson
glink_ssr is used to signal a remote processor "A" about the stopping of another remote processor "B", so that in the event that remote processor B is ever booted again the fifos of the glink channel between A and B is in a known state. But if remote processor A receives this notification before B is actually stopped the newly reset fifo indices will be interpreted as there being "data" on the channel and either side of the channel will enter a fatal error handler. Move the glink_ssr notification to the "unprepare" state of the rproc_subdev to avoid this issue. This has the side effect of us not notifying the dying remote processor itself about its fate, which has been seen to block in certain resource constraint scenarios. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-17Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This adds support for the STM32 remoteproc, additional i.MX platforms with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Also initial support for vendor specific resource table entries and support for unprocessed Qualcomm firmware files" * tag 'rproc-v5.3' of git://github.com/andersson/remoteproc: remoteproc: stm32: fix building without ARM SMCC remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER remoteproc: copy parent dma_pfn_offset for vdev remoteproc: qcom: q6v5-mss: Support loading non-split images soc: qcom: mdt_loader: Support loading non-split images remoteproc: stm32: add an ST stm32_rproc driver dt-bindings: remoteproc: add bindings for stm32 remote processor driver dt-bindings: stm32: add bindings for ML-AHB interconnect remoteproc: Use struct_size() helper remoteproc: add vendor resources handling remoteproc: imx: Fix typo in "failed" remoteproc: imx: Broaden the Kconfig selection logic remoteproc,rpmsg: add missing MAINTAINERS file entries remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
2019-07-08remoteproc: stm32: fix building without ARM SMCCArnd Bergmann
When compile testing this driver without SMCC support enabled, we get a link error: drivers/remoteproc/stm32_rproc.o: In function `stm32_rproc_start': stm32_rproc.c:(.text+0x776): undefined reference to `__arm_smccc_smc' drivers/remoteproc/stm32_rproc.o: In function `stm32_rproc_stop': stm32_rproc.c:(.text+0x92c): undefined reference to `__arm_smccc_smc' Make the actual call to arm_smccc_smc conditional on the Kconfig symbol controlling its implementation. Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-04remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADERYueHaibing
If QCOM_Q6V5_MSS is set but QCOM_MDT_LOADER is not, building will fails: drivers/remoteproc/qcom_q6v5_mss.o: In function `q6v5_start': qcom_q6v5_mss.c:(.text+0x3260): undefined reference to `qcom_mdt_read_metadata' Add QCOM_MDT_LOADER dependency for QCOM_Q6V5_MSS. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f04b91383456 ("remoteproc: qcom: q6v5-mss: Support loading non-split images") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-01remoteproc: copy parent dma_pfn_offset for vdevClement Leger
When preparing the subdevice for the vdev, also copy dma_pfn_offset since this is used for sub device dma allocations. Without that, there is incoherency between the parent dma settings and the childs one, potentially leading to dma_alloc_coherent failure (due to phys_to_dma using dma_pfn_offset for translation). Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool") Signed-off-by: Clement Leger <cleger@kalray.eu> Acked-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-01remoteproc: qcom: q6v5-mss: Support loading non-split imagesBjorn Andersson
In some software releases the firmware images are not split up with each loadable segment in it's own file. Check the size of the loaded firmware to see if it still contains each segment to be loaded, before falling back to the split-out segments. Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29remoteproc: stm32: add an ST stm32_rproc driverFabien Dessenne
This patch introduces a new remoteproc driver to control Cortex-M4 co-processor of the STM32 family. It provides with the following features: - start and stop - dedicated co-processor memory regions registration - coredump and recovery Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> [bjorn: Fixup of dev_dbg types and cast of int to pointer in mbox send] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29remoteproc: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct resource_table { ... u32 offset[0]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: table->num * sizeof(table->offset[0]) + sizeof(struct resource_table) with: struct_size(table, offset, table->num) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29remoteproc: add vendor resources handlingClement Leger
In order to allow rproc backend to handle vendor resources such as in OpenAMP, add a handle_rsc hook. This hook allow the rproc backends to handle vendor resources as they like. The hook will be called only for vendor resources and should return RSC_HANDLED on successful resource handling, RSC_IGNORED if resource was ignored, or a negative value on error. Signed-off-by: Clement Leger <cleger@kalray.eu> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03remoteproc: imx: Fix typo in "failed"Fabio Estevam
There are several places where "failed" is spelled incorrectly. Fix them all. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-03remoteproc: imx: Broaden the Kconfig selection logicFabio Estevam
Besides i.MX6SX and i.MX7D, there are other i.MX devices that contain Cortex M4 and could make use of the imx remoteproc driver, such as i.MX7ULP, i.MX8M, etc. Instead of adding new SoC entries in the Kconfig logic, make it broader by using the more generic ARCH_MXC, which encompasses all the 32-bit and 64-bit i.MX devices. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSPBjorn Andersson
Move the clock list to adsp_pil_data, make the pdc_reset optional and make the driver directly enable the xo, sleep and core clocks. The three clocks are previously toggled through the clock controller, but that means the same hardware block needs to be mapped in both drivers. Making the remoteproc driver enable the clocks is a nop when using the clock controller, but allow us to remove the clocks from the clock controller. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-14Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs" * tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits) remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" remoteproc: fix rproc_check_carveout_da() returned error and comments remoteproc: fix trace buffer va initialization remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain remoteproc: add warning on resource table cast remoteproc: fix rproc_alloc_carveout() bad variable cast remoteproc: fix rproc_da_to_va in case of unallocated carveout remoteproc: correct rproc_mem_entry_init() comments remoteproc: fix recovery procedure rpmsg: virtio: change header file sort style rpmsg: virtio: allocate buffer from parent remoteproc: st: add reserved memory support remoteproc: create vdev subdevice with specific dma memory pool remoteproc: q6v5_adsp: Remove voting for lpass_aon clock dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list remoteproc: q6v5-mss: Active powerdomain for SDM845 remoteproc: q6v5-mss: Vote for rpmh power domains remoteproc: qcom: Add support for parsing fw dt bindings remoteproc: qcom_q6v5: don't auto boot remote processor remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown ...