summaryrefslogtreecommitdiff
path: root/drivers/reset
AgeCommit message (Collapse)Author
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-10-24reset: improve of_xlate documentationPhilipp Zabel
Mention of_reset_simple_xlate as the default if of_xlate is not set. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: fix of_reset_control_get_count kerneldoc commentPhilipp Zabel
Add a newline and remove a superfluous kerneldoc marker before the of_reset_control_get_count kerneldoc comment, to fix documentation build warnings: ./drivers/reset/core.c:832: warning: Incorrect use of kernel-doc format: * of_reset_control_get_count - Count number of resets available with a device ./drivers/reset/core.c:840: warning: Function parameter or member 'node' not described in 'of_reset_control_get_count' Fixes: 17c82e206d2a ("reset: Add APIs to manage array of resets") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: fix of_reset_simple_xlate kerneldoc commentPhilipp Zabel
The flags parameter never made it into the API, but was erroneously included in the kerneldoc comment. Remove it to fix a documentation build warning: ./drivers/reset/core.c:86: warning: Excess function parameter 'flags' description in 'of_reset_simple_xlate' Fixes: 61fc41317666 ("reset: Add reset controller API") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: simple: Add Realtek RTD1195/RTD1295Andreas Färber
Enable RESET_SIMPLE for ARCH_REALTEK. They can reuse the DesignWare bindings to avoid a new compatible. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: simple: Keep alphabetical orderAndreas Färber
Restore alphabetical order for Kconfig dependencies and help text. Compatibles got out of order too, but no functional change done here. Goal is to make it obvious where to add new platforms. Fixes: 64c47b624f64 ("reset: Add reset controller support for BM1880 SoC") Fixes: 1d7592f84f92 ("reset: simple: Enable for ASPEED systems") Fixes: 96a2f50305d1 ("reset: build simple reset controller driver for Agilex") Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-22reset: zynqmp: Make reset_control_ops constPhilipp Zabel
The zynqmp_reset_ops structure is never modified. Make it const. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-22reset: hisilicon: hi3660: Make reset_control_ops constPhilipp Zabel
The hi3660_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-22reset: build simple reset controller driver for AgilexDinh Nguyen
The Intel SoCFPGA Agilex platform shares the same reset controller that is on the Stratix10. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-22reset: Fix memory leak in reset_control_array_put()Kishon Vijay Abraham I
Memory allocated for 'struct reset_control_array' in of_reset_control_array_get() is never freed in reset_control_array_put() resulting in kmemleak showing the following backtrace. backtrace: [<00000000c5f17595>] __kmalloc+0x1b0/0x2b0 [<00000000bd499e13>] of_reset_control_array_get+0xa4/0x180 [<000000004cc02754>] 0xffff800008c669e4 [<0000000050a83b24>] platform_drv_probe+0x50/0xa0 [<00000000d3a0b0bc>] really_probe+0x108/0x348 [<000000005aa458ac>] driver_probe_device+0x58/0x100 [<000000008853626c>] device_driver_attach+0x6c/0x90 [<0000000085308d19>] __driver_attach+0x84/0xc8 [<00000000080d35f2>] bus_for_each_dev+0x74/0xc8 [<00000000dd7f015b>] driver_attach+0x20/0x28 [<00000000923ba6e6>] bus_add_driver+0x148/0x1f0 [<0000000061473b66>] driver_register+0x60/0x110 [<00000000c5bec167>] __platform_driver_register+0x40/0x48 [<000000007c764b4f>] 0xffff800008c6c020 [<0000000047ec2e8c>] do_one_initcall+0x5c/0x1b0 [<0000000093d4b50d>] do_init_module+0x54/0x1d0 Fixes: 17c82e206d2a ("reset: Add APIs to manage array of resets") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-08reset: add support for the Meson-A1 SoC Reset ControllerXingyu Chen
The number of RESET registers and offset of RESET_LEVEL register for Meson-A1 are different from previous SoCs, In order to describe these differences, we introduce the struct meson_reset_param. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-03reset: uniphier-glue: Add Pro5 USB3 supportKunihiko Hayashi
Pro5 SoC has same scheme of USB3 reset as Pro4, so the data for Pro5 is equivalent to Pro4. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-03reset: Remove copy'n'paste redundancy in the commentsAndy Shevchenko
It seems the commit bb475230b8e5 ("reset: make optional functions really optional") brought couple of redundant lines in the comments. Drop them here. Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-03reset: meson-audio-arb: add sm1 supportJerome Brunet
Add the new arb reset lines of the SM1 SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-18reset: reset-scmi: add missing handle initialisationSudeep Holla
scmi_reset_data->handle needs to be initialised at probe, so that it can be later used to access scmi reset protocol APIs using the same. Since it was tested with a module that obtained handle elsewhere, it was missed easily. Add the missing scmi_reset_data->handle initialisation to fix the issue. Fixes: c8ae9c2da1cc ("reset: Add support for resets provided by SCMI") Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reported-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-14Merge tag 'scmi-updates-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI updates/fixes for v5.4 Handful of fixes/updates including: 1. SCMI v2.0(recently released) support for: - Performance protocol fast channels - Reset Management Protocol 2. SCMI infrastructure/core support for recieve(Rx) channels, asynchronous commands and delayed response 3. Usage of asynchronous commands for clock rate setting and sensor reading based on the attributes read from the firmware 4. Miscellaneous cleanups(typos, naming alignment with specification, and SPDX License identifier) 5. Couple of fixes: removal of extra check for invalid length and additional check to ensure platform/firmware has released shared memory before using it in OSPM * tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (22 commits) reset: Add support for resets provided by SCMI firmware: arm_scmi: Add RESET protocol in SCMI v2.0 dt-bindings: arm: Extend SCMI to support new reset protocol firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels firmware: arm_scmi: Use {get,put}_unaligned_le{32,64} accessors firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible firmware: arm_scmi: Drop config flag in clk_ops->rate_set firmware: arm_scmi: Add asynchronous sensor read if it supports firmware: arm_scmi: Drop async flag in sensor_ops->reading_get firmware: arm_scmi: Add support for asynchronous commands and delayed response firmware: arm_scmi: Add mechanism to unpack message headers firmware: arm_scmi: Separate out tx buffer handling and prepare to add rx firmware: arm_scmi: Add receive channel support for notifications firmware: arm_scmi: Segregate tx channel handling and prepare to add rx firmware: arm_scmi: Reorder some functions to avoid forward declarations firmware: arm_scmi: Check if platform has released shmem before using firmware: arm_scmi: Use the term 'message' instead of 'command' firmware: arm_scmi: Fix few trivial typos in comments firmware: arm_scmi: Remove extra check for invalid length message responses ... Link: https://lore.kernel.org/r/20190814172454.26191-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-12reset: Add support for resets provided by SCMISudeep Holla
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Management Interface(SCMI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. Adds support for the resets provided using SCMI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different ARM SCMI device operations provided by the ARM SCMI framework. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-06reset: Add DesignWare IP support to simple resetGustavo Pimentel
The reset-simple driver can be now used on DesignWare IPs by default by selecting the following compatible strings: - snps,dw-high-reset for active high resets inputs - snps,dw-low-reset for active low resets inputs Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-01reset: reset-meson: update with SPDX Licence identifierNeil Armstrong
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-01dt-bindings: reset: Fix typo in imx8mq resetsGuido Günther
Some of the mipi dsi resets were called IMX8MQ_RESET_MIPI_DIS__ instead of IMX8MQ_RESET_MIPI_DSI__ Since they're DSI related this looks like a typo. This fixes the only in tree user as well to not break bisecting. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-07-19Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ...
2019-07-04Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson
arm/drivers Reset controller changes for v5.3 This tag adds support for the Bitmain BM1880 reset controller to the reset-simple driver and fixes a spelling mistake in the i.MX7 reset controller binding document. * tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: imx7: Fix the spelling of 'indices' reset: Add reset controller support for BM1880 SoC dt-bindings: reset: Add devicetree binding for BM1880 reset controller Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04Merge tag 'reset-fixes-for-v5.2' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson
into arm/drivers Reset controller fix for v5.2 This tag removes a redundant device pointer NULL check from __reset_control_get_from_lookup to fix a static code checker warning. * tag 'reset-fixes-for-v5.2' of git://git.pengutronix.de/git/pza/linux: reset: remove redundant null check on pointer dev Link: https://lore.kernel.org/r/1562236626.6641.13.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04reset: remove redundant null check on pointer devColin Ian King
Pointer dev is being dereferenced when passed to the inlined functon dev_name, however, dev is later being null checked so at first this seems like a potential null pointer dereference. In fact, _reset_control_get_from_lookup is only ever called from __reset_control_get, right after checking dev->of_node hence dev can never be null. Clean this up by removing the redundant null check. Thanks to Philipp Zabel for spotting that dev can never be null. Addresses-Coverity: ("Dereference before null check") Fixes: 6691dffab0ab ("reset: add support for non-DT systems") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24reset: Add reset controller support for BM1880 SoCManivannan Sadhasivam
Add reset controller support for Bitmain BM1880 SoC reusing the reset-simple driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-04-28Merge tag 'tegra-for-5.2-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers soc/tegra: Changes for v5.2-rc1 Besides a couple of fixes to better cope with deferred probing, this set of patches also implements the acquire/release protocol for resets used during powergate operations. This is necessary to allow these resets to be temporarily shared with other devices that may also need to control these resets. * tag 'tegra-for-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc/tegra: pmc: Implement acquire/release for resets reset: Add acquire/release support for arrays reset: Add acquired flag to of_reset_control_array_get() reset: add acquired/released state for exclusive reset controls Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-24Merge tag 'drm/tegra/for-5.2-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v5.2-rc1 This contains a fix for the usage of shared resets that previously generated a WARN on boot. In addition, there's a fix for CPU cache maintenance of GEM buffers allocated using get_pages(). (airlied: contains a merge from a shared tegra tree) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418151447.9430-1-thierry.reding@gmail.com
2019-03-25reset: meson-audio-arb: Fix missing .owner setting of reset_controller_devAxel Lin
Set .owner to prevent module unloading while being used. Signed-off-by: Axel Lin <axel.lin@ingics.com> Fixes: d903779b58be ("reset: meson: add meson audio arb driver") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: Add acquire/release support for arraysThierry Reding
Add implementations that apply acquire and release operations to all reset controls part of a reset control array. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: Add acquired flag to of_reset_control_array_get()Thierry Reding
In order to be able to request an array of reset controls in acquired or released mode, add the acquired flag to of_reset_control_array_get() and pass the flag to subsequent calls of __of_reset_control_get(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-03-20reset: add acquired/released state for exclusive reset controlsPhilipp Zabel
There are cases where a driver needs explicit control over a reset line that is exclusively conneted to its device, but this control has to be temporarily handed over to the power domain controller to handle reset requirements during power transitions. Allow multiple exclusive reset controls to be requested in 'released' state for the same physical reset line, only one of which can be acquired at the same time. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-18drivers: Defer probe if firmware is not readyRajan Vaja
Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15Merge tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux into ↵Arnd Bergmann
arm/drivers Reset controller changes for v5.1 This adds the include/linux/reset directory to MAINTAINERS for reset specific headers and adds headers for sunxi and socfpga in there to get rid of a few extern function declarations. There is a new reset driver for the Broadcom STB reset controller and the i.MX7 system reset controller driver is extended to support i.MX8MQ as well. Finally, there is a new header with reset id constants for the Meson G12A SoC, which has a reset controller identical to Meson AXG and thus can reuse its driver and DT bindings. * tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: meson: add g12a bindings reset: imx7: Add support for i.MX8MQ IP block variant reset: imx7: Add plubming to support multiple IP variants reset: Add Broadcom STB SW_INIT reset controller driver dt-bindings: reset: Add document for Broadcom STB reset controller reset: socfpga: declare socfpga_reset_init in a header file reset: sunxi: declare sun6i_reset_init in a header file MAINTAINERS: use include/linux/reset for reset controller related headers dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/drivers arm64: zynqmp: SoC changes for v5.1 - Extend firmware interface with reset, nvmem, power management and power domain support - Add reset, nvmem driver, power management and power domain drivers - * tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx: drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings drivers: soc: xilinx: Add ZynqMP PM driver firmware: xilinx: Implement ZynqMP power management APIs dt-bindings: soc: Add ZynqMP PM bindings nvmem: zynqmp: Added zynqmp nvmem firmware driver dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver firmware: xilinx: Add zynqmp_pm_get_chipid() API reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller. dt-bindings: reset: Add bindings for ZynqMP reset driver firmware: xilinx: Add reset API's Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-29reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.Nava kishore Manne
Add a reset controller driver for Xilinx Zynq UltraScale+ MPSoC. The zynqmp reset-controller has the ability to reset lines connected to different blocks and peripheral in the Soc. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-28reset: imx7: Add support for i.MX8MQ IP block variantAndrey Smirnov
Add bits and pieces needed to support IP block variant found on i.MX8MQ SoCs. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [p.zabel@pengutronix.de: fixed whitespace alignment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: imx7: Add plubming to support multiple IP variantsAndrey Smirnov
In order to enable supporting i.MX8MQ with this driver, convert it to expect variant specific bits to be passed via driver data. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: Add Broadcom STB SW_INIT reset controller driverFlorian Fainelli
Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: socfpga: declare socfpga_reset_init in a header filePhilipp Zabel
Avoid declaring extern functions in c files. To make sure function definition and usage don't get out of sync, declare socfpga_reset_init in a common header. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-28reset: sunxi: declare sun6i_reset_init in a header filePhilipp Zabel
Avoid declaring extern functions in c files. To make sure function definition and usage don't get out of sync, declare sun6i_reset_init in a common header. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-glue: Add AHCI reset control support in glue layerKunihiko Hayashi
Add a reset line included in AHCI glue layer to enable AHCI core implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>