summaryrefslogtreecommitdiff
path: root/drivers/rtc/Makefile
AgeCommit message (Collapse)Author
2017-11-22Merge tag 'rtc-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is nothing scary this cycle, mostly driver fixes and updates. The core fix has been in for a while and has been tested on multiple kernel revisions by multiple teams. Core: - Fix setting the alarm to the next expiring timer New drivers: - Mediatek MT7622 RTC - NXP PCF85363 - Spreadtrum SC27xx PMIC RTC Drivers updates: - Use generic nvmem to expose the Non volatile ram for ds1305, ds1511, m48t86 and omap - abx80x: solve possible race condition at probe - armada38x: support trimming the RTC oscillator - at91rm9200: fix reading the alarm value at boot - ds1511: allow waking platform - m41t80: rework square wave output - pcf8523: support trimming the RTC oscillator - pcf8563: fix clock output rate - pl031: make interrupt optional - xgene: fix suspend/resume" * tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) dt-bindings: rtc: imxdi: Improve the bindings text rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation rtc: at91rm9200: fix reading alarm value rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm rtc: sysfs: Use time64_t variables to set time/alarm rtc: xgene: mark PM functions as __maybe_unused rtc: xgene: Fix suspend/resume rtc: pcf8563: don't alway enable the alarm rtc: pcf8563: fix output clock rate rtc: rx8010: Fix for incorrect return value rtc: rx8010: Specify correct address for RX8010_RESV31 rtc: rx8010: Remove duplicate define rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate rtc: m41t80: fix m41t80_sqw_round_rate return value rtc: m41t80: m41t80_sqw_set_rate should return 0 on success rtc: add support for NXP PCF85363 real-time clock rtc: omap: Support scratch registers ...
2017-11-20rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driverBaolin Wang
This patch adds the Spreadtrum RTC driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: add support for NXP PCF85363 real-time clockEric Nelson
Note that alarms are not currently implemented. 64 bytes of nvmem is supported and exposed in sysfs (# is the instance number, starting with 0): /sys/bus/nvmem/devices/pcf85363-#/nvmem Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-26rtc: mediatek: add driver for RTC on MT7622 SoCSean Wang
This patch introduces the driver for the RTC on MT7622 SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05rtc: Add Realtek RTD1295Andreas Färber
Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions. The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and Beelink Lake I. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01rtc: goldfish: Add RTC driver for Android emulatorMiodrag Dinic
Add device driver for a virtual RTC device in Android emulator. The compatible string used by OS for binding the driver is defined as "google,goldfish-rtc". Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: add generic nvmem supportAlexandre Belloni
Many RTCs have an on board non volatile storage. It can be battery backed RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace and in-kernel consumers. This stays compatible with the previous (non documented) ABI that was using /sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about the deprecation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: gemini/ftrtc010: rename driver and symbolsLinus Walleij
The Gemini RTC is actually a generic IP block from Faraday Technology names FTRTC010. Rename the driver file and all symbols to match this IP name. The relationship can be clearly seen in the U-Boot driver posted by Po-Yu Chuang for the Faraday A320 board: https://lists.denx.de/pipermail/u-boot/2009-September/061326.html Remove the dependency on ARCH_GEMINI but select the driver for ARCH_GEMINI so we get a smooth transition. The IP block is synthsized on different silicon and architectures. Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-05rtc: brcmstb-waketimer: Add Broadcom STB wake-timerBrian Norris
This adds support for the Broadcom STB wake-timer which is a timer in the chip's 27Mhz clock domain that offers the ability to wake the system (wake-up source) from suspend states (S2, S3, S5). It is supported using the rtc framework allowing us to configure alarms for system wake-up. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09rtc: cpcap: new rtc driverSebastian Reichel
This driver supports the Motorola CPCAP PMIC found on some of Motorola's mobile phones, such as the Droid 4. Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13rtc: add STM32 RTC driverAmelie Delaunay
This patch adds support for the STM32 RTC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: add support for EPSON TOYOCOM RTC-7301SF/DGAkinobu Mita
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: isl12057: remove driverAlexandre Belloni
The Intersil isl12057 is now supported by the ds1307 driver. Acked-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-08rtc: ac100: Add RTC driver for X-Powers AC100Chen-Yu Tsai
X-Powers AC100 is a codec / RTC combo chip. This driver supports the RTC sub-device. The RTC block also has clock outputs and non-volatile storage. Non-volatile storage wthin the RTC hardware is not supported. Clock output support is added in the next patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-26rtc: move mc146818 helper functions out-of-lineArnd Bergmann
The mc146818_get_time/mc146818_set_time functions are rather large inline functions in a global header file and are used in several drivers and in x86 specific code. Here we move them into a separate .c file that is compiled whenever any of the users require it. This also lets us remove the linux/acpi.h header inclusion from mc146818rtc.h, which in turn avoids some warnings about duplicate definition of the TRUE/FALSE macros. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04rtc: add support for Maxim max6916Venkat Prashanth B U
Add support for Maxim max6916 RTC. Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: merge ds3232 and ds3234Akinobu Mita
According to "Feature Comparison of the DS323x Real-Time Clocks" (http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and DS3234 are very similar. This merges rtc-ds3232 and rtc-ds3234 with using regmap. This change also enables to support alarm for ds3234. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pic32: Add PIC32 real time clock driverJoshua Henderson
This driver adds support for the PIC32 real time clock and calendar peripheral: - reading and setting time - alarms provided by dedicated IRQ Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: add Alphascale asm9260 driverOleksij Rempel
Add support for RTC controller found on Alphascale asm9260 SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: add driver for RX6110SA real time clockSteffen Trumtrar
The RX6110 comes in two different variants: SPI and I2C. This driver only supports the SPI variant. If the need ever arises to also support the I2C variant, this driver could easily be refactored to support both cases. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-04rtc: Remove Maxim 77802 driverJavier Martinez Canillas
The max77686 RTC driver now supports the max77802 RTC as well so there's no need to have a separate driver anymore. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: Add Epson RX8010SJ RTC driverAkshay Bhat
This driver supports the following functions: - reading and setting time - alarms when connected to an IRQ - reading and clearing the voltage low flags Datasheet: http://www.epsondevice.com/docs/qd/en/DownloadServlet?id=ID000956 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08rtc: Add a driver for Micro Crystal RV8803Alexandre Belloni
This driver supports the following functions: - reading and settings time - alarms when connected to an IRQ - reading and clearing the voltage low flags - nvram Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: add xilinx zynqmp rtc driverSuneel Garapati
Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC platform. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: add rtc-lpc24xx driverJoachim Eastwood
Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices. The RTC provides calendar and clock functionality together with alarm interrupt support. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25Merge tag 'rtc-v4.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - Coding style and whitespace fixes (interface, Makefile and Kconfig) - New rtc_tm_sub() helper - New CONFIG_RTC_SYSTOHC_DEVICE option - Removed rtc_set_mmss() New drivers: - Mediatek MT6397 - Cortina Gemini Drivers: - Year 2106 fixes for isl1208, pcf8563 and sunxi - update author email for at32ap700x and efi - ds1307: alarm fix - efi: use correct EFI 'epoch' - hym8563: make irq optional - imxdi: cleanups and better handling of the security/tamper monitoring - snvs: fix wakealarm - Compilation fixes or warning removal for gemini, mt6397, palmas, pfc8563 - Trivial cleanups for ab8500, ds1216, ds1286, ds1672, ep93xx, hid-sensor-time, max6900, max8998, max77686, max77802, mc13xxx, mv, mxc, s3c, spear, v3020 - Kconfig fixes for stmp3xxx and xgene" * tag 'rtc-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits) rtc: remove useless I2C dependencies rtc: whitespace fixes rtc: Properly sort Makefile MAINTAINERS: Add RTC subsystem repository rtc: pfc8563: fix uninitialized variable warning rtc: ds1307: Enable the mcp794xx alarm after programming time rtc: hym8563: make the irq optional rtc: gemini: fix cocci warnings rtc: mv: correct 24 hour error message rtc: mv: use BIT() rtc: efi: use correct EFI 'epoch' rtc: interface: Remove rtc_set_mmss() sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC rtc: NTP: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization rtc: sunxi: Replace deprecated rtc_tm_to_time() rtc: isl1208: Replace deprecated rtc_tm_to_time() rtc: Introduce rtc_tm_sub() helper function rtc: pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time() rtc: palmas: Initialise bb_charging flag before using it rtc: simplify use of devm_ioremap_resource ...
2015-06-25rtc: whitespace fixesAlexandre Belloni
Some entries in the Kconfig are improperly indented with spaces instead of tabs. Also fix whitespaces in Makefile. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: Properly sort MakefileAlexandre Belloni
Properly sort the Makefile by filename Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: driver for Cortina GeminiHans Ulli Kroll
Driver for the on chip RTC found on Cortina's SoC Gemini. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> [alexandre.belloni@free-electrons.com: use devm_request_irq() and remove useless goto] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: mediatek: Add MT6397 RTC driverTianping Fang
Add Mediatek MT6397 RTC driver Signed-off-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-23Merge tag 'mfd-for-linus-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Constify structures; throughout the subsystem - Move support to DT in; cros_ec - DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063 - ACPI changes and documentation; mfd-core - Use different platform specific API in; cros_ec_*, arizona-core - Remove unused parent field from; cros_ec_i2c - Add wake-up/reset delay in; cross_ec_spi, arizona-core - Staticise structures/functions in; cros_ec - Remove redundant code; arizona-core, max77686 - Bugfix; twl4030-power - Allow compile test; aat2870, tps65910 - MAINTAINERS adaptions; samsung, syscon - Resource Management (devm_*); arizona-core - Refactor Reset code; arizona-core - Insist on at least one full boot; arizona-core - Trivial formatting; arizona-core - Add low-power-sleep; arizona-core - IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld, wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c (Re-)moved drivers: - Move protocol helpers out to drivers/platform; cros_ec New drivers/supported devices: - Add support for AXP22x into axp20x - Add support for OnKey into da9063-core - Add support for Pinctrl into mt6397-core - New STMicroelectronics LPC Watchdog driver - New STMicroelectronics LPC Real-Time Clock driver" * tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits) mfd: lpc_ich: Assign subdevice ids automatically mfd: si476x-i2c: Pass the IRQF_ONESHOT flag mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag mfd: wm8350-core: Pass the IRQF_ONESHOT flag mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag mfd: twl4030-irq: Pass the IRQF_ONESHOT flag mfd: mt6397-core: Add GPIO sub-module support mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime mfd: dt: Add bindings for DA9063 OnKey mfd: da9063: Add support for OnKey driver mfd: arizona: Fix incorrect Makefile conditionals mfd: arizona: Add stub for wm5102_patch() mfd: Check ACPI device companion before checking resources Documentation: Add WM8998/WM1814 device tree bindings mfd: arizona: Split INx_MODE into two fields mfd: wm5110: Add delay before releasing reset line mfd: arizona: Add better support for system suspend ...
2015-05-05rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtcPhilippe De Muyter
This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC chips. It supports in particular, the supersets AB0805 and AB1805. It allows reading and writing the time, and enables the supercapacitor/ battery charger. [arnd@arndb.de: abx805 depends on i2c] [alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-30rtc: st: Add new driver for ST's LPC RTCLee Jones
ST's Low Power Controller (LPC) controls two devices; watchdog and RTC. Only one of the devices can be used at any one time. This is enforced by the correlating MFD driver. This portion of the driver-set controls the Real Time Clock. Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-17rtc: driver for Conexant Digicolor CX92755 on-chip RTCBaruch Siach
Add driver for the RTC hardware block on the Conexant CX92755 SoC, from the Digicolor series of SoCs. Tested on the Equinox evaluation board for the CX92755 chip. [akpm@linux-foundation.org: build command arrays at compile-time] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16rtc: add driver for DS1685 family of real time clocksJoshua Kinard
This adds a driver for the Dallas/Maxim DS1685-family of RTC chips. It supports the DS1685/DS1687, DS1688/DS1691, DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and DS17885/DS17887 RTC chips. These chips are commonly found in SGI O2 and SGI Octane systems. It was originally derived from a driver patch submitted by Matthias Fuchs many years ago for use in EPPC-405-UC modules, which also used these RTCs. In addition to the time-keeping functions, this RTC also handles the shutdown mechanism of the O2 and Octane and acts as a partial NVRAM for the boot PROMS in these systems. Verified on both an SGI O2 and an SGI Octane. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCsGregory CLEMENT
The new mvebu SoCs come with a new RTC driver. This patch adds the support for this new IP which is currently found in the Armada 38x SoCs. This RTC provides two alarms, but only the first one is used in the driver. The RTC also allows using periodic interrupts. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Arnaud Ebalard <arno@natisbad.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chipArnaud Ebalard
This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Calendar module w/ I2C interface. This support includes RTC time reading and setting, Alarm (1 minute accuracy) reading and setting, and battery low detection. The device also supports frequency adjustment and two timers but those features are currently not implemented in this driver. Due to alarm accuracy limitation (and current lack of timer support in the driver), UIE mode is not supported. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-17rtc/tpo: Driver to support rtc and wakeup on PowerNV platformNeelesh Gupta
The patch implements the OPAL rtc driver that binds with the rtc driver subsystem. The driver uses the platform device infrastructure to probe the rtc device and register it to rtc class framework. The 'wakeup' is supported depending upon the property 'has-tpo' present in the OF node. It provides a way to load the generic rtc driver in in the absence of an OPAL driver. The patch also moves the existing OPAL rtc get/set time interfaces to the new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL. Test results: ------------- Host: [root@tul169p1 ~]# ls -l /sys/class/rtc/ total 0 lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0 [root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time 08:10:07 [root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm [root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm 1413274345 [root@tul169p1 ~]# FSP: $ smgr mfgState standby $ rtim timeofday System time is valid: 2014/10/14 08:12:04.225115 $ smgr mfgState ipling $ CC: devicetree@vger.kernel.org CC: tglx@linutronix.de CC: rtc-linux@googlegroups.com CC: a.zummo@towertech.it Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-14rtc: add driver for Maxim 77802 PMIC Real-Time-ClockJavier Martinez Canillas
The MAX7802 PMIC has a Real-Time-Clock (RTC) with two alarms. This patch adds support for the RTC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. [akpm@linux-foundation.org: add comment clarifying ffs() use] Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14RTC: RK808: add RTC driver for RK808Chris Zhong
This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout. Add RTC driver for supporting RTC device present inside RK808 PMIC. [akpm@linux-foundation.org: make tm_def static] Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> says: Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-19rtc: sun6i: Add sun6i RTC driverChen-Yu Tsai
This patch introduces the driver for the RTC in the Allwinner A31 and A23 SoCs. Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the RTC in A31/A23 are a separate hardware block, which also contain a few controls for the RTC block hardware (a regulator and RTC block GPIO pin latches), while also having separate interrupts for the alarms. The hardware is different enough to make a different driver for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-08rtc: add pcf85063 supportSøren Andersen
Add support for the pcf85063 rtc chip. [akpm@linux-foundation.org: fix comment typo, tweak conding style] Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08rtc: ia64: allow other architectures to use EFI RTCMark Salter
Currently, the rtc-efi driver is restricted to ia64 only. Newer architectures with EFI support may want to also use that driver. This patch moves the platform device setup from ia64 into drivers/rtc and allow any architecture with CONFIG_EFI=y to use the rtc-efi driver. Signed-off-by: Mark Salter <msalter@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06rtc: da9063: RTC driverOpensource [Steve Twiss]
Add the RTC driver for DA9063. [akpm@linux-foundation.org: coding-style tweaks] Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc: add support for Microchip MCP795Josef Gajdusek
Add driver for SPI RTC Microchip MCP795. Only supports saving/loading time from the chip (i. e. no alarms/power events/ID). Signed-off-by: Josef Gajdusek <atx@atx.name> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc: add support for maxim dallas rtc ds1343 and ds1344Raghavendra Ganiga
Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc: add APM X-Gene SoC RTC driverLoc Ho
Add support for the APM X-Gene SoC RTC driver. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Cc: Jon Masters <jcm@redhat.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: add support for maxim dallas rtc ds1347Raghavendra Ganiga
Add support for maxim dallas rtc ds1347 Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - various misc bits - the rest of MM - add generic fixmap.h, use it - backlight updates - dynamic_debug updates - printk() updates - checkpatch updates - binfmt_elf - ramfs - init/ - autofs4 - drivers/rtc - nilfs - hfsplus - Documentation/ - coredump - procfs - fork - exec - kexec - kdump - partitions - rapidio - rbtree - userns - memstick - w1 - decompressors * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (197 commits) lib/decompress_unlz4.c: always set an error return code on failures romfs: fix returm err while getting inode in fill_super drivers/w1/masters/w1-gpio.c: add strong pullup emulation drivers/memstick/host/rtsx_pci_ms.c: fix ms card data transfer bug userns: relax the posix_acl_valid() checks arch/sh/kernel/dwarf.c: use rbtree postorder iteration helper instead of solution using repeated rb_erase() fs-ext3-use-rbtree-postorder-iteration-helper-instead-of-opencoding-fix fs/ext3: use rbtree postorder iteration helper instead of opencoding fs/jffs2: use rbtree postorder iteration helper instead of opencoding fs/ext4: use rbtree postorder iteration helper instead of opencoding fs/ubifs: use rbtree postorder iteration helper instead of opencoding net/netfilter/ipset/ip_set_hash_netiface.c: use rbtree postorder iteration instead of opencoding rbtree/test: test rbtree_postorder_for_each_entry_safe() rbtree/test: move rb_node to the middle of the test struct rapidio: add modular rapidio core build into powerpc and mips branches partitions/efi: complete documentation of gpt kernel param purpose kdump: add /sys/kernel/vmcoreinfo ABI documentation kdump: fix exported size of vmcoreinfo note kexec: add sysctl to disable kexec_load fs/exec.c: call arch_pick_mmap_layout() only once ...