summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-omap.c
AgeCommit message (Collapse)Author
2014-06-06drivers/rtc/rtc-omap.c: enable RTC_IRQWAKEEN bits when Alarm is setLokesh Vutla
When RTC CLKTRCTRL bit is configured in HW_AUTO, module goes to sleep in IDLE state. The Alarm SWakeup event can be used to wakeup the RTC when it is in IDLE state. In order to do so, the alarm needs to be set and enabled before RTC enters the IDLE state. Also the wakeup generation for alarm/timer event needs to be set (bits [1:0] in RTC_IRQWAKEEN register). Currently RTC_IRQWAKEEN bits are set only in suspend/resume paths. With this ALARM interrupts are not generated when it enters IDLE state. So programming the RTC_IRQWAKEEN bits when ever ALARM is set. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc/rtc-omap.c: add support for enabling 32khz clockSekhar Nori
Newer versions of OMAP RTC IP such as those found in AM335x and DRA7x need an explicit enable of 32khz functional clock which ticks the RTC. AM335x support was working so far because of settings done in U-Boot. However, the DRA7x U-Boot does no such enable of 32khz clock and this patch is need to get the RTC to work on DRA7x at least. In general, it is better to not depend on settings done in U-Boot. Thanks to Lokesh Vutla for noticing this. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc/rtc-omap.c: use BIT() macroSekhar Nori
Use BIT() macro for RTC_HAS_<FEATURE> defines instead of hand-writing bit masks. Use BIT() macros for register bit field definitions. While at it, fix indentation done using spaces. No functional change in this patch. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06drivers/rtc/rtc-omap.c: remove multiple device id checksSekhar Nori
Remove multiple superfluous device id checks. Since an id_table is present in the driver probe() should never encounter an empty device id entry. In case of OF style match, of_match_device() returns an matching entry. For paranoia sake, check for device id entry once and fail probe() if none is found. This is much better than checking for it multiple times. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/rtc/rtc-omap.c: remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11drivers/rtc/rtc-omap.c: add rtc wakeup support to alarm eventsHebbar Gururaja
On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN) is available to enable Alarm Wakeup feature. This register needs to be properly handled for the rtcwake to work properly. Platforms using such IP should set "ti,am3352-rtc" in rtc device dt compatibility node. Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: omap: restore back (hard-code) wakeup supportHebbar Gururaja
rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms. However, rtc wake support on OMAP1 is broken. Hence the device_init_wakeup() was removed from rtc-omap driver and moved to platform board files that supported it (DA850/OMAP-L138). [1] However, recently [2] it was suggested that driver should always do a device_init_wakeup(dev, true). Platforms that don't want/need wakeup support can disable it from userspace via: echo disabled > /sys/devices/.../power/wakeup Also, with the new DT boot-up, board file doesn't exist and hence there is no way to have device wakeup support rtc. The fix for above issues, is to hard code device_init_wakeup() inside driver and let platforms that don't need this, handle it through the sysfs power entry. [1] https://patchwork.kernel.org/patch/136731/ [2] http://www.mail-archive.com/davinci-linux-open-source@linux. davincidsp.com/msg26077.html Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-omap.c: include <linux/io.h> instead of <asm/io.h>Sachin Kamat
Use #include <linux/io.h> instead of <asm/io.h> as pointed out by checkpatch. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: George G. Davis <gdavis@mvista.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-18drivers/rtc: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-04-29rtc: rtc-omap: convert omap_rtc_driver to dev_pm_opsJingoo Han
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/rtc/rtc-omap.c: update to devm_* APIVishwanathrao Badarkhe, Manish
Update the code to use devm_* API so that driver core will manage resources. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-omap: use module_platform_driver_probe()Jingoo Han
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17rtc: omap: add runtime pm supportVaibhav Hiremath
OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX. Driver currently doesn't handle any clocks, which may be right for OMAP1 architecture but in case of AM33XX, the clock/module needs to be enabled in order to access the registers. So convert this driver to runtime pm, which internally handles rest. [afzal@ti.com: handle error path] Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17rtc: omap: dt supportAfzal Mohammed
Enhance rtc-omap driver with DT capability Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17rtc: omap: kicker mechanism supportAfzal Mohammed
OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/rtc: remove IRQF_DISABLEDYong Zhang
Since commit e58aa3d2d0cc ("genirq: run irq handlers with interrupts disabled") we run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled - see commit b738a50a2026 ("genirq: warn when handler enables interrupts"). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03rtc-omap: fix initialization of control registerDaniel Glöckner
As the comment explains, the intention of the code is to clear the OMAP_RTC_CTRL_MODE_12_24 bit, but instead it only clears the OMAP_RTC_CTRL_SPLIT and OMAP_RTC_CTRL_AUTO_COMP bits, which should be kept. OMAP_RTC_CTRL_DISABLE, OMAP_RTC_CTRL_SET_32_COUNTER, OMAP_RTC_CTRL_TEST, and OMAP_RTC_CTRL_ROUND_30S are also better off being cleared. Signed-off-by: Daniel Glöckner <dg@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18RTC: rtc-omap: Fix a leak of the IRQ during init failureAxel Lin
In omap_rtc_probe error path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: "George G. Davis" <gdavis@mvista.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Link: http://lkml.kernel.org/r/%3C1303005778.2889.2.camel%40phoenix%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-09RTC: Clean out UIE icotl implementationsJohn Stultz
With the generic RTC rework, the UIE mode irqs are handled in the generic layer, and only hardware specific ioctls get passed down to the rtc driver layer. So this patch removes the UIE mode ioctl handling in the rtc driver layer, which never get used. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-03RTC: Convert rtc drivers to use the alarm_irq_enable methodJohn Stultz
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-01-13drivers/rtc/rtc-omap.c: fix a memory leakAxel Lin
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Also add a missing iounmap() in omap_rtc_remove(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27rtc: omap: let device wakeup capability be configured from chip init logicSekhar Nori
The rtc-omap driver currently hardcodes the RTC wakeup capability to be "not capable". While this seems to be true for existing OMAP1 boards which are not wired for this, the DA850/OMAP-L138 SoC, the RTC can always be wake up source from its "deep sleep" mode. This patch lets the wakeup capability be set from platform data and does not override the setting from the driver. For DA850/OMAP-L138, this is done from arch/arm/mach-davinci/devices-da8xx.c:da8xx_register_rtc() Note that this patch does not change the behavior on any existing OMAP1 board since the platform device registration sets the wakeup capability to 0 by default. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16rtc: make rtc-omap driver ioremap its register spaceMark A. Greer
The rtc-omap driver currently assumes that the rtc's registers are at a fixed address and already mapped into virtual memory space. Remove those assumptions so the same driver can be used for similar devices that reside at different physical addresses (e.g., TI's DA8xx/OMAP-L13x SoC's). Also allow the possibility for the timer and alarm interrupts to use the same IRQ. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-24rtc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: a.zummo@towertech.it Cc: rtc-linux@googlegroups.com Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-20drivers/rtc/: use bcd2bin/bin2bcdAdrian Bunk
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24rtc: rtc-omap footprint shrinkageDavid Brownell
Shrink the runtime footprint of the OMAP1 RTC driver a bunch by removing some old hacks and switching to platform_driver_probe(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-22[RTC] remove references to asm/mach/time.hRussell King
asm/mach/time.h is the ARM header file for setting up kernel ticker timekeeping (be that the old jiffy interrupt or the new clocksource.) RTC drivers have no business using this header file, and in fact do not require it. Build tested on at91sam9rl, omap and s3c2410 configurations. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-11rtc: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable RTC platform drivers, to re-enable module auto loading. [dbrownell@users.sourceforge.net: more drivers, minor fix] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17rtc-omap build fixDavid Brownell
Fix typo which breaks build. How did that happen? Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: remove "RTC_ALM_SET mode" bugsDavid Brownell
This fixes a common glitch in how RTC drivers handle two "set alarm" modes, by getting rid of the surprising/hidden one that was rarely implemented correctly (and which could expose nonportable hardware-specific behavior). The glitch comes from the /dev/rtcX logic implementing the legacy RTC_ALM_SET (limited to 24 hours, needing RTC_AIE_ON) ioctl on top of the RTC driver call providing access to the newer RTC_WKALM_SET (without those limitations) by initializing the day/month/year fields to be invalid ... that second mode. Now, since few RTC drivers check those fields, and most hardware misbehaves when faced with invalid date fields, many RTC drivers will set bogus alarm times on those RTC_ALM_SET code paths. (Several in-tree drivers have that issue, and I also noticed it with code reviews on several new RTC drivers.) This patch ensures that RTC drivers never see such invalid alarm fields, by moving some logic out of rtc-omap into the RTC_ALM_SET code and adding an explicit check (which will prevent the issue on other code paths). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: suspend()/resume() restores system clockDavid Brownell
RTC class suspend/resume support, re-initializing the system clock on resume from the clock used to initialize it at boot time. - The reinit-on-resume is hooked to the existing RTC_HCTOSYS config option, on the grounds that a clock good enough for init must also be good enough for re-init. - Inlining a version of the code used by ARM, to save and restore the delta between a selected RTC and the current system wall-clock time. - Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs. This means that systems using those RTCs across suspend/resume will likely want to change their kernel configs to enable RTC_HCTOSYS. If HCTOSYS isn't using a second RTC (with battery?), this changes the system's initial date from Jan 1970 to the epoch this hardware uses: 1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc. This goes on top of the patch series removing "struct class_device" usage from the RTC framework. That's all needed for class suspend()/resume(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: remove rest of class_deviceDavid Brownell
Finish converting the RTC framework so it no longer uses class_device. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: rtc interfaces don't use class_deviceDavid Brownell
This patch removes class_device from the programming interface that the RTC framework exposes to the rest of the kernel. Now an rtc_device is passed, which is more type-safe and streamlines all the relevant code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-13[PATCH] rtc framewok: rtc_wkalrm.enabled reporting updatesDavid Brownell
Fix a glitch in the procfs dumping of whether the alarm IRQ is enabled: use the traditional name (from drivers/char/rtc.c and many other places) of "alarm_IRQ", not "alrm_wakeup" (which didn't even match the efirtc code, which originated that reporting API). Also, update a few of the RTC drivers to stop providing that duplicate status, and/or to expose it properly when reporting the alarm state. We really don't want every RTC driver doing their own thing here... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] add rtc-omap driverDavid Brownell
This creates a new RTC-framework driver for the RTC/calendar module found in various OMAP1 chips. (OMAP2 and OMAP3 use external RTCs, like those in TI's multifunction PM companion chips.) It's been in the Linux-OMAP tree for several months now, and other trees before that, so it's quite stable. The most notable issue is that the OMAP IRQ code doesn't yet support the RTC IRQ as a wakeup event. Once that's fixed, a patch will be needed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>