summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-s5m.c
AgeCommit message (Collapse)Author
2016-03-14rtc: s5m: De-inline large functions to save spaceKrzysztof Kozlowski
Few functions were marked inline even though they were relatively large and sometimes used in multiple places. De-inline them to let the compiler decide whether optimization makes sense. This fixes inline_hunt report: drivers/rtc/rtc-s5m.c: Deinline s5m8767_rtc_set_alarm_reg, save 704 bytes drivers/rtc/rtc-s5m.c: Deinline s5m8767_wait_for_udr_update, save 192 bytes Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: s5m: Make register configuration per S2MPS device to remove exceptionsKrzysztof Kozlowski
Before updating time and alarm the driver must set appropriate mask in UDR register. For that purpose the driver uses common register configuration and a lot of exceptions per device in the code. The exceptions are not obvious, for example except the change in the logic sometimes the fields are swapped (WUDR and AUDR between S2MPS14 and S2MPS15). This leads to quite complicated code. Try to make it more obvious by: 1. Documenting the UDR masks for devices and operations. 2. Adding fields in register configuration structure for each operation (read time, write time and alarm). 3. Splitting the configuration per S2MPS13, S2MPS14 and S2MPS15 thus removing exceptions for them. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: s5m: Add separate field for storing auto-cleared mask in register configKrzysztof Kozlowski
Some devices from S2M/S5M family use different register update masks for different operations (alarm and register update). Now the driver uses common register configuration and a lot of exceptions per device in code. Before eliminating the exceptions and using specific register configuration for given device, make the auto-cleared mask a separate field. This is merely a refactoring. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11rtc: s5m: Cleanup by removing useless 'rtc' prefix from fieldsKrzysztof Kozlowski
Remove the 'rtc' prefix from some of the fields in struct s5m_rtc_reg_config because it is obvious - this is a RTC driver. No functional changes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-23rtc: s5m.c: Add support for S2MPS15 RTCAlim Akhtar
RTC found in s2mps15 is almost same as one found on s2mps13 with few differences in RTC_UPDATE register fields, like: 1> Bit[4] and Bit[1] are reversed - On s2mps13 WUDR -> bit[4], AUDR -> bit[1] - On s2mps15 WUDR -> bit[1], AUDR -> bit[4] 2> In case of s2mps13, for alarm register, need to set both WDUR and ADUR high, whereas for s2mps15 only set AUDR to high. 3> On s2mps15, WUDR, RUDR and AUDR functions should never be used at the same time. This patch add required changes to enable s2mps15 rtc timer. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-05rtc: Fix module autoload for rtc-{ab8500,max8997,s5m} driversJavier Martinez Canillas
These platform drivers have a platform device ID table but the module alias information is not created so module autoloading will not work. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: s5m: fix to update ctrl registerJoonyoung Shim
According to datasheet, the S2MPS13X and S2MPS14X should update write buffer via setting WUDR bit to high after ctrl register is written. If not, ALARM interrupt of rtc-s5m doesn't happen first time when i use tools/testing/selftests/timers/rtctest.c test program and hour format is used to 12 hour mode in Odroid-XU3 board. One more issue is the RTC doesn't keep time on Odroid-XU3 board when i turn on board after power off even if RTC battery is connected. It can be solved as setting WUDR & RUDR bits to high at the same time after RTC_CTRL register is written. It's same with condition of only writing ALARM registers, so this is for only S2MPS14 and we should set WUDR & A_UDR bits to high on S2MPS13. I can't find any reasonable description about this like fix from datasheet, but can find similar codes from rtc driver source of hardkernel kernel and vendor kernel. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Cc: <stable@vger.kernel.org> # v3.16 Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-04-17drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD typeKrzysztof Kozlowski
The RTC driver supports two flavors of S5M devices: S5M8767-like and S2MPS14-like. On S2MPS13 and S2MPS14 devices the RTC module is the same so we want to re-use the existing support of S2MPS14. However device type was passed from parent MFD driver in platform data structure. This way for the S2MPS13 device the main MFD driver passed device type of 'S2MPS13X'. Instead decouple detecting of device type between main MFD and RTC driver. This allows adding support for other S2MPS14 variations (like S2MPS11 and S2MPS13) easily by adding to mfd/sec-core.c: static const struct mfd_cell s2mps13_devs[] = { { .name = "s2mps14-rtc", } }; Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: use more standard kernel logging stylesJoe Perches
Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s5m.c: add support for S2MPS13 RTCKrzysztof Kozlowski
The S2MPS13 RTC is almost the same as S2MPS14. The differences when updating alarm are: 1. Set WUDR+AUDR field instead of WUDR+RUDR. 2. Clear the AUDR field later (it is not auto-cleared). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-03rtc: s5m: Remove unused watchdog and sudden momentary power lossKrzysztof Kozlowski
The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary Power Loss) are never enabled. These are left-overs from board files. After removing them the driver's shutdown callback is empty so get rid of it as well. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-26drivers/rtc/rtc-s5m.c: terminate s5m_rtc_id array with empty elementAndrey Ryabinin
Array of platform_device_id elements should be terminated with empty element. Fixes: 5bccae6ec458 ("rtc: s5m-rtc: add real-time clock driver for s5m8767") Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-29drivers/rtc/rtc-s5m.c: re-add support for devices without irq specifiedBartlomiej Zolnierkiewicz
The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: consolidate two device type switch statementsKrzysztof Kozlowski
In probe the configuration of driver for different chipsets was done in two switch (pdata->device_type) statements. Consolidate them into one switch statement to increase code readability. Additionally check the return value of regmap_irq_get_virq and exit probe on error. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: add support for S2MPS14 RTCKrzysztof Kozlowski
Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14 (in comparison to S5M8767): - Layout of registers - Lack of century support for time and alarms (7 registers used for storing time/alarm) - Two buffer control registers: WUDR and RUDR - No register for enabling writing time - RTC interrupts are reported in main PMIC I2C device Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: support different register layoutKrzysztof Kozlowski
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Add a map of registers used by the driver which differ between the chipsets (S5M876X and S2MPS14). 2. Move code of checking for alarm pending to separate function. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: use shorter time of register updateKrzysztof Kozlowski
Set the time needed for updating alarm and time registers to 0.45 ms. The default is 7.32 ms which is too long and leads to warnings when setting alarm or time: s5m-rtc: waiting for UDR update, reached max number of retries Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10rtc: s5m: remove undocumented time init on first bootKrzysztof Kozlowski
Remove the code for initializing time if this is first boot. The code for detecting first boot uses undocumented field RTC_TCON in RTC_UDR_CON register. According to S5M8767's datasheet this field is reserved. On S2MPS14 it is not documented at all. On device first boot the registers will be initialized with reset value (2000-01-01 00:00:00). The code might work on S5M8763 but still this does not look like a task for RTC driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10mfd/rtc: sec/s5m: rename SEC* symbols to S5MKrzysztof Kozlowski
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Rename SEC* symbols to S5M. 2. Add S5M prefix to some of defines which are different between S5M876X and S2MPS14. This is only a rename-like patch, new code is not added. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-03mfd/rtc: s5m: Do not allocate RTC I2C dummy and regmap for unsupported chipsetsKrzysztof Kozlowski
The rtc-s5m driver does not support all of S2M and S5M chipsets supported by main MFD sec-core driver. For such chipsets unsupported by rtc-s5m, the MFD sec-core driver initialized regmap with default config. This config in such cases wouldn't work at all. The main MFD sec-core driver shouldn't initialize regmap for child drivers which is not used by them and even not valid. Move the allocation of RTC I2C dummy device and initialization of RTC regmap from main MFD sec-core driver to the rtc-s5m driver. The rtc-s5m driver will use proper regmap config for supported devices. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-23drivers/rtc/rtc-s5m.c: s5m_rtc_{suspend,resume}() should depend on ↵Geert Uytterhoeven
CONFIG_PM_SLEEP If CONFIG_PM_SLEEP=n: drivers/rtc/rtc-s5m.c:643: warning: `s5m_rtc_resume' defined but not used drivers/rtc/rtc-s5m.c:654: warning: `s5m_rtc_suspend' defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12mfd/rtc: s5m: fix register updating by adding regmap for RTCKrzysztof Kozlowski
Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and add new regmap for RTC. On S5M8767A registers were not properly updated and read due to usage of the same regmap as the PMIC. This could be observed in various hangs, e.g. in infinite loop during waiting for UDR field change. On this chip family the RTC has different I2C address than PMIC so additional regmap is needed. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12rtc: s5m: enable IRQ wake during suspendKrzysztof Kozlowski
Add PM suspend/resume ops to rtc-s5m driver and enable IRQ wake during suspend so the RTC would act like a wake up source. This allows waking up from suspend to RAM on RTC alarm interrupt. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mark Brown <broonie@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12rtc: s5m: limit endless loop waiting for register updateKrzysztof Kozlowski
After setting alarm or time the driver is waiting for UDR register to be cleared indicating that registers data have been transferred. Limit the endless loop to only 5 retries. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12rtc: s5m: fix unsuccesful IRQ request during probeKrzysztof Kozlowski
Probe failed for rtc-s5m: s5m-rtc s5m-rtc: Failed to request alarm IRQ: 12: -22 s5m-rtc: probe of s5m-rtc failed with error -22 Fix rtc-s5m interrupt request by using regmap_irq_get_virq() for mapping the IRQ. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12drivers/rtc/rtc-s5m.c: fix info->rtc assignmentGeert Uytterhoeven
Fix this warning: drivers/rtc/rtc-s5m.c: In function `s5m_rtc_probe': drivers/rtc/rtc-s5m.c:545: warning: assignment from incompatible pointer type struct s5m_rtc_info.rtc has type "struct regmap *", while struct sec_pmic_dev.rtc has type "struct i2c_client *". Probably the author wanted to assign "struct sec_pmic_dev.regmap", which has the correct type. Also, as "rtc" doesn't make much sense as a name for a regmap, rename it to "regmap". Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13rtc: s5m-rtc: add real-time clock driver for s5m8767Sangbeom Kim
Add real-time clock driver for s5m8767. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Todd Broch <tbroch@chromium.org> Cc: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> [mfd parts] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>