summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-test.c
AgeCommit message (Collapse)Author
2020-12-03rtc: test: remove debug messageAlexandre Belloni
Remove leftover debug message Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201121230644.572419-1-alexandre.belloni@bootlin.com
2020-11-19rtc: rework rtc_register_device() resource managementBartosz Golaszewski
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2019-05-23rtc: test: enable wakeup flagsRoman Stratiienko
Alarmtimer interface uses only the RTC with wekeup flags enabled. Allow to use rtc-test driver with alarmtimer interface. Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-08rtc: test: use .set_timeAlexandre Belloni
Use .set_time instead of the deprecated .set_mmss64. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04rtc: test: do not use assignment in if conditionAlexandre Belloni
Fix checkpatch error: drivers/rtc/rtc-test.c:155: ERROR: do not use assignment in if condition Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-28rtc: test: Switch to SPDX identifierAlexandre Belloni
Replace the license boilerplate by an SPDX identifier Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-28rtc: test: make license text and module license match.Alexandre Belloni
The license text is specifying GPL v2 only but the MODULE_LICENSE is set to GPL which means GNU Public License v2 or later. When MODULE_LICENSE and boiler plate does not match, go for boiler plate license. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-12rtc: test: make array pdev staticColin Ian King
The array pdev is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'pdev' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-06-07rtc: test: remove alarm support from the first deviceAlexandre Belloni
To test for issues with RTCs that don't provide an alarm, remove alarm support from the first test RTC device. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-06-07rtc: test: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: remove irq sysfs fileAlexandre Belloni
Now that alarms are emulated, remove the irq sysfs file that could be used to send alarms. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: emulate alarms using timersAlexandre Belloni
Use timers to emulate alarms. Note that multiple alarms may happen if they are set more than 15 days after the current RTC time. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: store time as an offset to system timeAlexandre Belloni
Store the time as an offset to system time. As the offset is in second, it is currently always synced with system time. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: allow registering many devicesAlexandre Belloni
Use a loop to register RTC devices Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: remove useless proc infoAlexandre Belloni
The rtc proc callback is useless for two reasosn: - the test RTC is often not the first RTC so it will never be used - all the info is available in the name file of the RTC sys folder Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-26rtc: test: remove obsolete .set_mmssAlexandre Belloni
There is no point in testing .set_mmss versus .set_mmss64 as there are both taking the exact same argument (truncated for set_mmss though). Also, this allows to constify struct rtc_ops. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-03rtc: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for zynqmp) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2015-04-03drivers/rtc/test: Update driver to address y2038/y2106 issuesXunlei Pang
This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing get_seconds() with ktime_get_real_seconds() - Replacing rtc_time_to_tm() with rtc_time64_to_tm() Also add test_rtc_set_mmss64() for testing rtc_class_ops's set_mmss64(), which can be activated by "test_mmss64" module parameter. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-9-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-04-03rtc: fix potential race conditionAlessandro Zummo
RTC drivers must not return an error after device registration. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Reported-by: Ales Novak <alnovak@suse.cz> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-test: use devm_rtc_device_register()Jingoo Han
devm_rtc_device_register() is device managed and makes cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-03Drivers: rtc: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17drivers/rtc/rtc-test.c: avoid calling platform_device_put() twiceWei Yongjun
In case of error, test_init() needs to call platform_device_del() instead of platform_device_unregister(). Otherwise, we may call platform_device_put() twice. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) [akpm@linux-foundation.org: improve label naming] Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-09RTC: Fix the cross interrupt issue on rtc-test.Marcelo Roberto Jimenez
The rtc-test driver is meant to provide a test/debug code for the RTC subsystem. The rtc-test driver simulates specific interrupts by echoing to the sys interface. Those were the update, alarm and periodic interrupts. As a side effect of the new implementation, any interrupt generated in the rtc-test driver would trigger the same code path in the generic code, and thus the distinction among interrupts gets lost. This patch preserves the previous behaviour of the rtc-test driver, where e.g. an update interrupt would not trigger an alarm or periodic interrupt, and vice-versa. In real world RTC drivers, this is not an issue, but in the rtc-test driver it may be interesting to distinguish these interrupts for testing purposes. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-03RTC: Convert rtc drivers to use the alarm_irq_enable methodJohn Stultz
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2009-06-19rtc: make rtc_update_irq callable with irqs enabledAtsushi Nemoto
The rtc_update_irq() might be called with irqs enabled, if a interrupt handler was registered without IRQF_DISABLED. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_lock/spin_unlock. Also update kerneldoc and drivers which do extra work to follow the current interface spec, as suggestted by David Brownell. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06rtc: use set_mmss when set_time is not availableAlessandro Zummo
Drivers should only need to implement either set_mmss (counter based RTCs) or set_time (most RTCs). The RTC subsystem will handle them appropriately. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28rtc: silence section mismatch warning in rtc-testSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.data+0x253e28): Section mismatch in reference from the variable test_drv to the function .devexit.text:test_remove() Fix by renaming the platfrom_driver variable from *_drv to *_driver so modpost ignore the reference to an __devexit section. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: rtc interfaces don't use class_deviceDavid Brownell
This patch removes class_device from the programming interface that the RTC framework exposes to the rest of the kernel. Now an rtc_device is passed, which is more type-safe and streamlines all the relevant code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] RTC: handle sysfs errorsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25[PATCH] rtc class locking bugfixesDavid Brownell
I got a lockdep warning when running "rtctest" so I though it'd be good to see what was up. - The warning was for rtc->irq_task_lock, gotten from rtc_update_irq() by irq handlerss ... but in a handful of other cases, grabbed without blocking IRQs. - Some callers to rtc_update_irq() were not ensuring IRQs were blocked, yet the routine expects that; make sure all callers block IRQs. It would appear that RTC API tests haven't been part of anyone's kernel regression test suite recently, at least not with lockdep running. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] constify rtc_class_ops: update driversDavid Brownell
Update RTC framework so that drivers can constify their method tables, moving them from ".data" to ".rodata". Then update the drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] rtc subsystem: use ENOIOCTLCMD and ENOTTY where appropriateAlessandro Zummo
Appropriately use -ENOIOCTLCMD and -ENOTTY when the ioctl is not implemented by a driver. (akpm: we're not allowed to return -ENOIOCTLCMD to userspace. This patch does the right thing). Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] RTC subsystem: compact error messagesAlessandro Zummo
Move registration error message from drivers to core. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] RTC subsystem: fix proc outputAlessandro Zummo
Move the "24hr: yes" proc output from drivers to rtc proc code. This is required because the time value in the proc output is always in 24hr mode regardless of the driver. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] RTC subsystem: test device/driverAlessandro Zummo
Interrupts can be generated by echo "alarm|tick|update" >/sys/class/rtc/rtcX/device/irq Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit (git 2.34.1) at 2024-05-22 15:22:07 +0000