summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2017-02-21Merge tag 'pinctrl-v4.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
2017-01-26rtc: jz4740: make the driver buildable as a module againAlexandre Belloni
By using kernel_halt() instead of machine_halt(), we can make the driver build as a module. However, jz4740 platforms not loading this module will not be able to power off. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Revert "rtc: jz4740: make the driver builtin only" This reverts commit b9168c539c0b2de756aaffd380384dbde8adbe07.
2017-01-26pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg
The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-18Merge tag 'rtc-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ...
2016-12-19rtc: mcp795: Fix whitespace and indentation.Emil Bartczak
Fix whitespace and indentation errors and the following checkpatch warnings: - line 15: Block comments use a trailing */ on a separate line - line 256: Line over 80 characters No code change. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: Prefer using the BIT() macro.Emil Bartczak
This patch doesn't change the code but replaces all bitmask values with the BIT(x) macro. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: fix month write resetting date to 1.Emil Bartczak
According to Microchip errata some combinations of date and month values may result in the date being reset to 1, even if the date is also written with the month (for example 31-07 or 31-08). As a workaround avoid writing date and month values within the same Write command. Instead, terminate the Write command after loading the date and begin a new command to write the month. In addition, disable the oscillator before loading the new values. This is done by ensuring both the ST and EXTOSC bits are cleared and waiting for the OSCON bit to clear. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: fix time range difference between linux and RTC chip.Emil Bartczak
In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG, month range is 1~12. This patch adjusts difference of them. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: fix bitmask value for leap year (LP).Emil Bartczak
According the datasheet the leap year is a fifth bit in month register. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: use bcd2bin/bin2bcd.Emil Bartczak
Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions. This change fixes the wrong conversion of month value from binary to BCD (missing right shift operation for 10 month). Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: add support for EPSON TOYOCOM RTC-7301SF/DGAkinobu Mita
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: ds1307: Add ACPI supportTin Huynh
This patch enables ACPI support for rtc-ds1307 driver. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-12Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The time/timekeeping/timer folks deliver with this update: - Fix a reintroduced signed/unsigned issue and cleanup the whole signed/unsigned mess in the timekeeping core so this wont happen accidentaly again. - Add a new trace clock based on boot time - Prevent injection of random sleep times when PM tracing abuses the RTC for storage - Make posix timers configurable for real tiny systems - Add tracepoints for the alarm timer subsystem so timer based suspend wakeups can be instrumented - The usual pile of fixes and updates to core and drivers" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) timekeeping: Use mul_u64_u32_shr() instead of open coding it timekeeping: Get rid of pointless typecasts timekeeping: Make the conversion call chain consistently unsigned timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion alarmtimer: Add tracepoints for alarm timers trace: Update documentation for mono, mono_raw and boot clock trace: Add an option for boot clock as trace clock timekeeping: Add a fast and NMI safe boot clock timekeeping/clocksource_cyc2ns: Document intended range limitation timekeeping: Ignore the bogus sleep time if pm_trace is enabled selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous" clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map() arm64: dts: rockchip: Arch counter doesn't tick in system suspend clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend posix-timers: Make them configurable posix_cpu_timers: Move the add_device_randomness() call to a proper place timer: Move sys_alarm from timer.c to itimer.c ptp_clock: Allow for it to be optional Kconfig: Regenerate *.c_shipped files after previous changes ...
2016-12-07rtc: imxdi: (trivial) fix a typoMartin Kaiser
Fix a typo Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-07rtc: ds1374: Merge conditional + WARN_ON()Srikant Ritolia
WARN_ON does both these things in one statement. Using a better pattern with WARN_ON(). Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-30rtc: twl: make driver DT onlyNicolae Rosia
Since there are no platform based users and all users of this code are TI OMAP-based which is DT only, it makes sense to remove unused code. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-30rtc: twl: kill static variablesNicolae Rosia
The current code uses static variables which prevent the use of multiple rtc twl instances. We also make it clear that this driver supports only TWL4030 and TWL6030 classes. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-29timekeeping: Ignore the bogus sleep time if pm_trace is enabledChen Yu
Power management suspend/resume tracing (ab)uses the RTC to store suspend/resume information persistently. As a consequence the RTC value is clobbered when timekeeping is resumed and tries to inject the sleep time. Commit a4f8f6667f09 ("timekeeping: Cap array access in timekeeping_debug") plugged a out of bounds array access in the timekeeping debug code which was caused by the clobbered RTC value, but we still use the clobbered RTC value for sleep time injection into kernel timekeeping, which will result in random adjustments depending on the stored "hash" value. To prevent this keep track of the RTC clobbering and ignore the invalid RTC timestamp at resume. If the system resumed successfully clear the flag, which marks the RTC as unusable, warn the user about the RTC clobber and recommend to adjust the RTC with 'ntpdate' or 'rdate'. [jstultz: Fixed up pr_warn formating, and implemented suggestions from Ingo] [ tglx: Rewrote changelog ] Originally-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1480372524-15181-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09rtc: fix typos in KconfigAlexandre Belloni
s/buillt/built/g Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-09rtc: jz4740: make the driver builtin onlyAlexandre Belloni
Since the driver is now calling machine_halt() that is not exported, it has to be built in the kernel. Building it as a module will fail at linking time. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-08rtc: jz4740: remove unused EXPORT_SYMBOLAlexandre Belloni
jz4740_rtc_poweroff() is only called from the driver, stop exporting it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: Enable compile testing for Maxim and Samsung driversKrzysztof Kozlowski
max8907, max77686 and s5m RTC drivers can be compile tested to increase build coverage. The s5m-rtc uses REGMAP_IRQ so add this as explicit dependency. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: jz4740: Add support for acting as the system power controllerPaul Cercueil
The 'system-power-controller' singleton entry can be used in the devicetree node of the jz4740-rtc driver to specify that the driver is granted the right to power off the system through the registers of the RTC unit. See the documentation for more details: Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: jz4740: Add support for devicetreePaul Cercueil
See Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt for a description of the bindings. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: jz4740: Add support for the RTC in the jz4780 SoCPaul Cercueil
The RTC unit present in the JZ4780 works mostly the same as the one in the JZ4740. The major difference is that register writes need to be explicitly enabled, by writing a magic code (0xA55A) to a "write enable" register before each access. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: sparc: make sun4v explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/rtc/Kconfig:config RTC_DRV_SUN4V drivers/rtc/Kconfig: bool "SUN4V Hypervisor RTC" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: rtc-linux@googlegroups.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: sparc: make starfire explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/rtc/Kconfig:config RTC_DRV_STARFIRE drivers/rtc/Kconfig: bool "Starfire RTC" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: rtc-linux@googlegroups.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: make rtc-lib explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/rtc/Kconfig:config RTC_LIB drivers/rtc/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag since all that information is already contained at the top of the file in the comments. We don't replace module.h with init.h since the file doesn't need that. However we do add export.h since the file uses EXPORT_SYMBOL. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: rtc-linux@googlegroups.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: omap: prevent disabling of clock/module during suspendTero Kristo
If RTC is running from an internal clock source, the RTC module can't be disabled; otherwise it stops ticking completely. Current suspend handler implementation disables the clock/module unconditionally, instead fix this by disabling the clock only if we are running on external clock source, which is not affected by suspend. The prevention of disabling the clock must be done via implementing the runtime_pm handlers for the device, and returning an error code from the runtime suspend handler; otherwise OMAP core PM will disable the clocks for the driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: omap: Fix selecting external oscLokesh Vutla
RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support") Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04rtc: pcf85063: do not register a RTC device if chip is not presentMirza Krak
Add a sanity check to see if chip is present. If we can not communicate with the chip there is no point in registering a RTC device. Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20rtc: cmos: Don't enable interrupts in the middle of the interrupt handlerVille Syrjälä
Using spin_lock_irq()/spin_unlock_irq() from within the interrupt handler is a no-no. Let's save/restore the flags to avoid turning on interrupts prematurely. We hit this in a bunch of our CI systems, but for whatever reason I wasn't able to reproduce on my own machine, so this fix is just based on the backtrace. [ 202.634918] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2729 trace_hardirqs_on_caller+0x113/0x1b0 [ 202.634919] DEBUG_LOCKS_WARN_ON(current->hardirq_context) [ 202.634929] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep i2c_designware_platform i2c_designware_core snd_hda_core mei_me mei snd_pcm r8169 mii sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915] [ 202.634930] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G U 4.9.0-rc1-CI-CI_DRM_1734+ #1 [ 202.634931] Hardware name: GIGABYTE M4HM87P-00/M4HM87P-00, BIOS F6 12/10/2014 [ 202.634933] ffff88011ea03d68 ffffffff8142dce5 ffff88011ea03db8 0000000000000000 [ 202.634934] ffff88011ea03da8 ffffffff8107e496 00000aa900000002 ffffffff81e249a0 [ 202.634935] ffffffff81815637 ffffffff82e7c280 0000000000000000 0000000000000004 [ 202.634936] Call Trace: [ 202.634939] <IRQ> [ 202.634939] [<ffffffff8142dce5>] dump_stack+0x67/0x92 [ 202.634941] [<ffffffff8107e496>] __warn+0xc6/0xe0 [ 202.634944] [<ffffffff81815637>] ? _raw_spin_unlock_irq+0x27/0x50 [ 202.634945] [<ffffffff8107e4fa>] warn_slowpath_fmt+0x4a/0x50 [ 202.634946] [<ffffffff810d6d83>] trace_hardirqs_on_caller+0x113/0x1b0 [ 202.634948] [<ffffffff810d6e2d>] trace_hardirqs_on+0xd/0x10 [ 202.634949] [<ffffffff81815637>] _raw_spin_unlock_irq+0x27/0x50 [ 202.634951] [<ffffffff81672042>] rtc_handler+0x32/0xa0 [ 202.634954] [<ffffffff814c08a3>] acpi_ev_fixed_event_detect+0xd4/0xfb [ 202.634956] [<ffffffff814c2ccb>] acpi_ev_sci_xrupt_handler+0xf/0x2d [ 202.634957] [<ffffffff814ab3ee>] acpi_irq+0x11/0x2c [ 202.634960] [<ffffffff810e5288>] __handle_irq_event_percpu+0x58/0x370 [ 202.634961] [<ffffffff810e55be>] handle_irq_event_percpu+0x1e/0x50 [ 202.634962] [<ffffffff810e5624>] handle_irq_event+0x34/0x60 [ 202.634963] [<ffffffff810e8906>] handle_fasteoi_irq+0xa6/0x170 [ 202.634966] [<ffffffff8101eef5>] handle_irq+0x15/0x20 [ 202.634967] [<ffffffff8101e548>] do_IRQ+0x68/0x130 [ 202.634968] [<ffffffff81816789>] common_interrupt+0x89/0x89 [ 202.634970] <EOI> [ 202.634970] [<ffffffff81814c73>] ? mwait_idle+0x93/0x210 [ 202.634971] [<ffffffff81814c6a>] ? mwait_idle+0x8a/0x210 [ 202.634972] [<ffffffff81026b0a>] arch_cpu_idle+0xa/0x10 [ 202.634973] [<ffffffff8181509e>] default_idle_call+0x1e/0x30 [ 202.634974] [<ffffffff810cbf6c>] cpu_startup_entry+0x17c/0x1f0 [ 202.634976] [<ffffffff8180ca87>] rest_init+0x127/0x130 [ 202.634978] [<ffffffff81f77f08>] start_kernel+0x3f6/0x403 [ 202.634980] [<ffffffff81f7728f>] x86_64_start_reservations+0x2a/0x2c [ 202.634981] [<ffffffff81f77404>] x86_64_start_kernel+0x173/0x186 [ 202.634982] ---[ end trace 293c99618fa08d34 ]--- Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: 983bf1256edb ("rtc: cmos: Clear ACPI-driven alarms upon resume") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-19rtc: cmos: don't refer to asm-generic/rtc.hChristoph Hellwig
That header has been gone for a while. I've fixed up the Kconfig comment, but the one in rtc-cmos.c doesn't make any sense to me even looking at its history. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-19rtc: cmos: Reject unsupported alarm valuesGabriele Mazzotta
Some platforms allows to specify the month and day of the month in which an alarm should go off, some others the day of the month and some others just the time. Currently any given value is accepted by the driver and only the supported fields are used to program the hardware. As consequence, alarms are potentially programmed to go off in the wrong moment. Fix this by rejecting any unsupported value. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-19rtc: cmos: remove all __exit_p annotationsLABBE Corentin
I got the following stack trace under qemu: [ 7.575243] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 7.596098] IP: [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280 [ 7.615699] PGD 3ccbe067 [ 7.615923] PUD 3daf2067 [ 7.635156] PMD 0 [ 7.654358] Oops: 0000 [#1] SMP [ 7.673869] Modules linked in: [ 7.693235] CPU: 0 PID: 1701 Comm: hwclock Tainted: G W 4.9.0-rc1+ #24 [ 7.712455] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 [ 7.753569] task: ffff88003d88dc40 task.stack: ffffc90000224000 [ 7.773743] RIP: 0010:[<ffffffff814f5b08>] [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280 [ 7.794893] RSP: 0018:ffffc90000227c10 EFLAGS: 00010296 [ 7.815890] RAX: 000000000000001d RBX: ffffc90000227d28 RCX: ffffffff8182be78 [ 7.836057] RDX: 0000000000000001 RSI: 0000000000000202 RDI: 0000000000000202 [ 7.856612] RBP: ffffc90000227c48 R08: 0000000000000000 R09: 0000000000000001 [ 7.877561] R10: 00000000000001c0 R11: 00000000000001c0 R12: 0000000000000000 [ 7.897072] R13: ffff88003d96f400 R14: ffff88003dac6410 R15: ffff88003dac6420 [ 7.917403] FS: 00007f77f42d9700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 7.938293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.958364] CR2: 0000000000000010 CR3: 000000003ccbb000 CR4: 00000000000006f0 [ 7.978028] Stack: [ 7.997120] ffff88003dac6000 ffff88003dac6410 0000000058049d01 ffffc90000227d28 [ 8.016993] ffff88003dac6000 ffff88003dac6410 ffff88003dac6420 ffffc90000227c98 [ 8.039505] ffffffff814f225d 0000001800227c98 000000090000002a 0000000900000011 [ 8.059985] Call Trace: [ 8.080110] [<ffffffff814f225d>] __rtc_set_alarm+0x8d/0xa0 [ 8.099421] [<ffffffff814f2389>] rtc_timer_enqueue+0x119/0x190 [ 8.119925] [<ffffffff814f2e6e>] rtc_update_irq_enable+0xbe/0x100 [ 8.140583] [<ffffffff814f3bb0>] rtc_dev_ioctl+0x3c0/0x480 [ 8.161162] [<ffffffff81146b6a>] ? user_path_at_empty+0x3a/0x50 [ 8.182717] [<ffffffff8114aa36>] do_vfs_ioctl+0x96/0x5c0 [ 8.204624] [<ffffffff8113e066>] ? vfs_stat+0x16/0x20 [ 8.225994] [<ffffffff8113e135>] ? SyS_newstat+0x15/0x30 [ 8.247043] [<ffffffff8114afa7>] SyS_ioctl+0x47/0x80 [ 8.267191] [<ffffffff815f5c77>] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 8.288719] Code: 6a 81 48 89 e5 41 57 41 56 41 55 49 89 fd 41 54 53 48 89 f3 48 c7 c6 20 c4 78 81 48 83 ec 10 e8 8f 00 ef ff 4d 8b a5 a0 00 00 00 <41> 8b 44 24 10 85 c0 0f 8e 2b 02 00 00 4c 89 ef 31 c0 b9 53 01 [ 8.335233] RIP [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280 [ 8.357096] RSP <ffffc90000227c10> [ 8.379051] CR2: 0000000000000010 [ 8.401736] ---[ end trace 5cbcd83a1f225ed3 ]--- This occur only when CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled and CONFIG_RTC_DRV_CMOS builtin. When cmos_set_alarm() is called dev is NULL and so trigger the deref via cmos->irq The problem comes from that the device is removed but no remove function are called due to _exit_p(). This patch remove all _exit_p() annotation. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-19rtc: asm9260: fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled so user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/rtc/rtc-asm9260.ko | grep alias $ After this patch: $ modinfo drivers/rtc/rtc-asm9260.ko | grep alias alias: of:N*T*Calphascale,asm9260-rtcC* alias: of:N*T*Calphascale,asm9260-rtc Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-14Merge tag 'rtc-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.9 Subsystem: - delete owner assignment in multiple drivers - constify rtc_class_ops structures Drivers: - ac100: support clock-output-names - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes - ds1307: fix century bit support while staying comaptible with previous behaviour by default - ds1347: switch to regmap - isl12057 is now handled by ds1307 - omap: support external wakeup - rv8803: allow to disable voltage drop detection" * tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits) rtc: rv8803: set VDETOFF and SWOFF via device tree dt/bindings: Add bindings for Micro Crystal rv8803 devicetree: Add Micro Crystal AG vendor id rtc: cmos: avoid unused function warning rtc: ac100: Add NULL checking for devm_kzalloc call rtc: ds1347: changed raw spi calls to register map calls rtc: cmos: Restore alarm after resume rtc: cmos: Clear ACPI-driven alarms upon resume rtc: omap: Support ext_wakeup configuration rtc: cmos: Initialize hpet timer before irq is registered rtc: asm9260: rework locking rtc: asm9260: allow COMPILE_TEST rtc: constify rtc_class_ops structures rtc: ac100: support clock-output-names in device tree binding rtc: rx6110: remove owner assignment rtc: pic32: Delete owner assignment rtc: bq32k: Fix handling of oscillator failure flag rtc: bq32k: Use correct mask name for 'minutes' register. rtc: sysfs: fix a cast removing the const attribute Documentation: dt: Intersil isl12057 is not a trivial device ...
2016-10-12rtc: rv8803: set VDETOFF and SWOFF via device treeOleksij Rempel
There might be designs where the power supply circuit is designed in a way that VDETOFF and SWOFF is required to be set. Otherwise the RTC detects a power loss. Add a device tree interface for this. Signed-off-by: Carsten Resch <Carsten.Resch@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-04Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', ↵Lee Jones
'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged
2016-09-22rtc: cmos: avoid unused function warningArnd Bergmann
A bug fix for the ACPI side of this driver caused a harmless build warning: drivers/rtc/rtc-cmos.c:1115:13: error: 'cmos_check_acpi_rtc_status' defined but not used [-Werror=unused-function] static void cmos_check_acpi_rtc_status(struct device *dev, We can avoid the warning and simplify the driver at the same time by removing the #ifdef for CONFIG_PM and rely on the SIMPLE_DEV_PM_OPS() to set everything up correctly. cmos_resume() has to get marked as __maybe_unused so we don't introduce another warning, and the two variants of cmos_poweroff() can get merged into one using an IS_ENABLED() check. Fixes: 983bf1256edb ("rtc: cmos: Clear ACPI-driven alarms upon resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22rtc: ac100: Add NULL checking for devm_kzalloc callAxel Lin
devm_kzalloc can return NULL, add NULL checking to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22rtc: ds1347: changed raw spi calls to register map callsRaghavendra Ganiga
This patch changes calls of spi read write calls to register map read and write calls in rtc ds1347 Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: cmos: Restore alarm after resumeGabriele Mazzotta
Some platform firmware may interfere with the RTC alarm over suspend, resulting in the kernel and hardware having different ideas about system state but also potentially causing problems with firmware that assumes the OS will clean this case up. This patch restores the RTC alarm on resume to ensure that kernel and hardware are in sync. The case we've seen is Intel Rapid Start, which is a firmware-mediated feature that automatically transitions systems from suspend-to-RAM to suspend-to-disk without OS involvement. It does this by setting the RTC alarm and a flag that indicates that on wake it should perform the transition rather than re-starting the OS. However, if the OS has set a wakeup alarm that would wake the machine earlier, it refuses to overwrite it and allows the system to wake instead. This fails in the following situation: 1) User configures Intel Rapid Start to transition after (say) 15 minutes 2) User suspends to RAM. Firmware sets the wakeup alarm for 15 minutes in the future 3) User resumes after 5 minutes. Firmware does not reset the alarm, and as such it is still set for 10 minutes in the future 4) User suspends after 5 minutes. Firmware notices that the alarm is set for 5 minutes in the future, which is less than the 15 minute transition threshold. It therefore assumes that the user wants the machine to wake in 5 minutes 5) System resumes after 5 minutes The worst case scenario here is that the user may have put the system in a bag between (4) and (5), resulting in it running in a confined space and potentially overheating. This seems reasonably important. The Rapid Start support code got added in 3.11, but it can be configured in the firmware regardless of kernel support. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: cmos: Clear ACPI-driven alarms upon resumeGabriele Mazzotta
Currently ACPI-driven alarms are not cleared when they wake the system. As consequence, expired alarms must be manually cleared to program a new alarm. Fix this by correctly handling ACPI-driven alarms. More specifically, the ACPI specification [1] provides for two alternative implementations of the RTC. Depending on the implementation, the driver either clear the alarm from the resume callback or from ACPI interrupt handler: - The platform has the RTC wakeup status fixed in hardware (ACPI_FADT_FIXED_RTC is 0). In this case the driver can determine if the RTC was the reason of the wakeup from the resume callback by reading the RTC status register. - The platform has no fixed hardware feature event bits. In this case a GPE is used to wake the system and the driver clears the alarm from its handler. [1] http://www.acpi.info/DOWNLOADS/ACPI_5_Errata%20A.pdf Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: omap: Support ext_wakeup configurationMarcin Niestroj
Support configuration of ext_wakeup sources. This patch makes it possible to enable ext_wakeup and set it's polarity, depending on board configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to notify about power-button presses. Handling power-button presses enables to recover from RTC-only power states correctly. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-20rtc: cmos: Initialize hpet timer before irq is registeredPratyush Anand
We have observed on few x86 machines with rtc-cmos device that hpet_rtc_interrupt() is called just after irq registration and before cmos_do_probe() could call hpet_rtc_timer_init(). So, neither hpet_default_delta nor hpet_t1_cmp is initialized by the time interrupt is raised in the given situation, and this results in NMI watchdog LOCKUP. It has only been observed sporadically on kdump secondary kernels. See the call trace: ---<-snip->--- [ 27.913194] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0 [ 27.915371] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-342.el7.x86_64 #1 [ 27.917503] Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014 [ 27.919455] ffffffff8186a728 0000000059c82488 ffff880034e05af0 ffffffff81637bd4 [ 27.921870] ffff880034e05b70 ffffffff8163144a 0000000000000010 ffff880034e05b80 [ 27.924257] ffff880034e05b20 0000000059c82488 0000000000000000 0000000000000000 [ 27.926599] Call Trace: [ 27.927352] <NMI> [<ffffffff81637bd4>] dump_stack+0x19/0x1b [ 27.929080] [<ffffffff8163144a>] panic+0xd8/0x1e7 [ 27.930588] [<ffffffff8111d3e0>] ? restart_watchdog_hrtimer+0x50/0x50 [ 27.932502] [<ffffffff8111d4a2>] watchdog_overflow_callback+0xc2/0xd0 [ 27.934427] [<ffffffff811612c1>] __perf_event_overflow+0xa1/0x250 [ 27.936232] [<ffffffff81161d94>] perf_event_overflow+0x14/0x20 [ 27.937957] [<ffffffff81032ae8>] intel_pmu_handle_irq+0x1e8/0x470 [ 27.939799] [<ffffffff8164164b>] perf_event_nmi_handler+0x2b/0x50 [ 27.941649] [<ffffffff81640d99>] nmi_handle.isra.0+0x69/0xb0 [ 27.943348] [<ffffffff81640f49>] do_nmi+0x169/0x340 [ 27.944802] [<ffffffff816401d3>] end_repeat_nmi+0x1e/0x2e [ 27.946424] [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380 [ 27.948197] [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380 [ 27.949992] [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380 [ 27.951816] <<EOE>> <IRQ> [<ffffffff8108f5a3>] ? run_timer_softirq+0x43/0x340 [ 27.954114] [<ffffffff8111e24e>] handle_irq_event_percpu+0x3e/0x1e0 [ 27.955962] [<ffffffff8111e42d>] handle_irq_event+0x3d/0x60 [ 27.957635] [<ffffffff811210c7>] handle_edge_irq+0x77/0x130 [ 27.959332] [<ffffffff8101704f>] handle_irq+0xbf/0x150 [ 27.960949] [<ffffffff8164a86f>] do_IRQ+0x4f/0xf0 [ 27.962434] [<ffffffff8163faed>] common_interrupt+0x6d/0x6d [ 27.964101] <EOI> [<ffffffff8163f43b>] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 27.966308] [<fffff8111ff07>] __setup_irq+0x2a7/0x570 [ 28.067859] [<ffffffff81056e60>] ? hpet_cpuhp_notify+0x140/0x140 [ 28.069709] [<ffffffff8112032c>] request_threaded_irq+0xcc/0x170 [ 28.071585] [<ffffffff814b24a6>] cmos_do_probe+0x1e6/0x450 [ 28.073240] [<ffffffff814b2710>] ? cmos_do_probe+0x450/0x450 [ 28.074911] [<ffffffff814b27cb>] cmos_pnp_probe+0xbb/0xc0 [ 28.076533] [<ffffffff8139b245>] pnp_device_probe+0x65/0xd0 [ 28.078198] [<ffffffff813f8ca7>] driver_probe_device+0x87/0x390 [ 28.079971] [<ffffffff813f9083>] __driver_attach+0x93/0xa0 [ 28.081660] [<ffffffff813f8ff0>] ? __device_attach+0x40/0x40 [ 28.083662] [<ffffffff813f6a13>] bus_for_each_dev+0x73/0xc0 [ 28.085370] [<ffffffff813f86fe>] driver_attach+0x1e/0x20 [ 28.086974] [<ffffffff813f8250>] bus_add_driver+0x200/0x2d0 [ 28.088634] [<ffffffff81ade49a>] ? rtc_sysfs_init+0xe/0xe [ 28.090349] [<ffffffff813f9704>] driver_register+0x64/0xf0 [ 28.091989] [<ffffffff8139b070>] pnp_register_driver+0x20/0x30 [ 28.093707] [<ffffffff81ade4ab>] cmos_init+0x11/0x71 ---<-snip->--- This patch moves hpet_rtc_timer_init() before IRQ registration, so that we can gracefully handle such spurious interrupts. It also masks HPET RTC interrupts, in case IRQ registration fails. We were able to reproduce the problem in maximum 15 trials of kdump secondary kernel boot on an hp-dl160gen8 FCoE host machine without this patch. However, more than 35 trials went fine after applying this patch. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pratyush Anand <panand@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05rtc: asm9260: rework lockingAlexandre Belloni
The rtc-asm9260 driver uses a discrete spinlock (wrongly uninitialized). Use the rtc mutex to lock mmio accesses instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05rtc: asm9260: allow COMPILE_TESTAlexandre Belloni
The rtc-asm9260 driver compiles correctly on other architectures, add COMPILE_TEST to improve code coverage. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit (git 2.34.1) at 2024-05-30 02:07:51 +0000