summaryrefslogtreecommitdiff
path: root/drivers/s390/net
AgeCommit message (Collapse)Author
2017-06-08net: s390: fix up for "Fix inconsistent teardown and release of private ↵Stephen Rothwell
netdev state" Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11s390/qeth: add missing hash table initializationsUrsula Braun
commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") added new hash tables, but missed to initialize them. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11s390/qeth: avoid null pointer dereference on OSNJulian Wiedmann
Access card->dev only after checking whether's its valid. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11s390/qeth: unbreak OSM and OSN supportJulian Wiedmann
commit b4d72c08b358 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows: As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet. Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all. For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes. When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes. This allows us to skip qeth_l2_create_device_attributes() in case of an early setup. Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes. If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice. What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM. Based on an initial patch by Ursula Braun. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11s390/qeth: handle sysfs error during initializationUrsula Braun
When setting up the device from within the layer discipline's probe routine, creating the layer-specific sysfs attributes can fail. Report this error back to the caller, and handle it by releasing the layer discipline. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> [jwi: updated commit msg, moved an OSN change to a subsequent patch] Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: remove unimplemented gdev routinesJulian Wiedmann
prepare() and complete() are not implemented by any discipline, so just drop all the indirection. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: use LINK_MODE_* to report the link characteristicsJulian Wiedmann
LINK_MODE_* replaces the u32-limited SUPPORTED_* / ENABLED_* definitions. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: convert to ETHTOOL_GLINKSETTINGS APIJulian Wiedmann
get_settings() is deprecated and lacks support for higher link speeds, so implement get_link_ksettings() instead. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: clean up qeth_set_ecmd_adv_sup()Julian Wiedmann
In preparation for moving to get_link_ksettings(), clean up how we build the supported and advertised port/speed masks. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: use and remove some definesJulian Wiedmann
1. a buffer has 16 is_header flags, because that's its # of elements 2. replace the last occurrence of QETH_HEADER_SIZE, and remove it Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: use correct return type for hard_start_xmit()Julian Wiedmann
ndo_start_xmit() expects us to return netdev_tx_t here... Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: remove unused parameterJulian Wiedmann
'elements_needed' is not used in qeth_do_send_packet_fast(), so consequently remove it. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: move gdev shutdown handler to coreJulian Wiedmann
Duplicated code. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: move NAPI poll routine to coreJulian Wiedmann
Identical code, we just need to call a layer-specific hook to process any received buffer. qeth_buffer_reclaim_work() is shuffled around to avoid a forward declaration for qeth_queue_input_buffer(). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11s390/qeth: move common ioctl handling to coreJulian Wiedmann
There's a number of layer-independent ioctls that we can handle in core, and reduce code duplication. For layer-specific ioctls, add a do_ioctl() discipline hook. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/netiucv: improve endianness handlingHans Wippel
Replace ntohs with endianness conversion for the SKB protocol assignment to avoid an endianness warning reported by sparse. No functional change. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/ctcm: improve endianness handlingHans Wippel
Use endianness conversions for SKB protocol assignments and usage to avoid endianness warnings reported by sparse. No functional changes. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/qeth: improve endianness handlingHans Wippel
Avoid endianness warnings reported by sparse by (1) using endianness conversions for assigning and using network packet fields, and (2) removing unnecessary endianness conversions from qeth_l3_rebuild_skb. No functional changes. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/qeth: Remove unused codeJulian Wiedmann
1. options.add_hhlen is set but never used, drop it 2. clean up no longer required forward declarations 3. delete all sorts of unused defines Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/qeth: remove unused return valueJulian Wiedmann
qeth_qdio_output_handler() is the only caller of qeth_handle_send_error() and doesn't care about the return value. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/qeth: fix up ssqd tracingJulian Wiedmann
The ac fields are bitmaps, so format them as hex. While at it, also print the ac2 field. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07s390/qeth: use QDIO_*_QFMT definesJulian Wiedmann
better use the constant definitions. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24s390/qeth: no ETH header for outbound AF_IUCVJulian Wiedmann
With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr() fills this ETH header... and then immediately moves it to the skb's headroom, where it disappears and is never seen again. But it's still possible for us to return NETDEV_TX_BUSY after the skb has been modified. Since we didn't get a private copy of the skb, the next time the skb is delivered to hard_start_xmit() it no longer has the expected layout (we moved the ETH header to the headroom, so skb->data now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr() does another round of rebuilding, the resulting qeth header ends up all wrong. On transmission, the buffer is then rejected by the HiperSockets device with SBALF15 = x'04'. When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it tears down the offending socket. As the ETH header for AF_IUCV serves no purpose, just align the code to what we do for IP traffic on L3 HiperSockets: keep the ETH header at skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer(). When mapping the payload into the SBAL elements, the ETH header is then stripped off. This avoids the skb manipulations in qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit() after NETDEV_TX_BUSY is now processed properly. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24s390/qeth: size calculation outbound buffersJulian Wiedmann
Depending on the device type, hard_start_xmit() builds different output buffer formats. For instance with HiperSockets, on both L2 and L3 we strip the ETH header from the skb - L3 doesn't need it, and L2 carries it in the buffer's header element. For this, we pass data_offset = ETH_HLEN all the way down to __qeth_fill_buffer(), where skb->data is then adjusted accordingly. But the initial size calculation still considers the *full* skb length (including the ETH header). So qeth_get_elements_no() can erroneously reject a skb as too big, even though it would actually fit into an output buffer once the ETH header has been trimmed off later. Fix this by passing an additional offset to qeth_get_elements_no(), that indicates where in the skb the on-wire data actually begins. Since the current code uses data_offset=-1 for some special handling on OSA, we need to clamp data_offset to 0... On HiperSockets this helps when sending ~MTU-size skbs with weird page alignment. No change for OSA or AF_IUCV. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: fix retrieval of vipa and proxy-arp addressesUrsula Braun
qeth devices in layer3 mode need a separate handling of vipa and proxy-arp addresses. vipa and proxy-arp addresses processed by qeth can be read from userspace. Introduced with commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") the retrieval of vipa and proxy-arp addresses is broken, if more than one vipa or proxy-arp address are set. The qeth code used local variable "int i" for 2 different purposes. This patch now spends 2 separate local variables of type "int". While touching these functions hash_for_each_safe() is converted to hash_for_each(), since there is no removal of hash entries. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reference-ID: RQM 3524 Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: issue STARTLAN as first IPA commandJulian Wiedmann
STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: shuffle MAC management functions aroundJulian Wiedmann
Move all MAC utility functions in one place, and drop the forward declarations. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: extract qeth_l2_remove_mac()Julian Wiedmann
This matches qeth_l2_write_mac(). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: consolidate errno translationJulian Wiedmann
Consolidate errno handling for MAC management: Instead of doing this in every caller, do it in one place. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Suggested-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: don't convert return code twiceJulian Wiedmann
qeth_l2_send_groupmac() already translates the return code, so calling qeth_setdel_makerc() a second time only produces garbage. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: drop qeth_l2_del_all_macs() parameterJulian Wiedmann
The only caller passes del = 0, so remove both the parameter and the code that handles != 0. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: Remove QETH_IP_HEADER_SIZEJulian Wiedmann
Remove unused define QETH_IP_HEADER_SIZE. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: Allow reading hsuid in state DOWNJulian Wiedmann
Accessing the current hsuid via card->options.hsuid is perfectly fine, even when the card is DOWN. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: display warning for OSA3 RX/TX checksum offloadingThomas Richter
When RX/TX checksum offloading is turned on and the adapter is an OSA 3 card in layer 3 mode, the checksum offloading is only performed when both peers use different adapters. If both peers share an OSA 3 card, communication is a memory copy and checksum offloading is not performed. This patch adds a warning to inform the administrator. OSA 3 in layer 2 mode does not offer the RX/TX checksum offload feature. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: test RX/TX checksum offload replyThomas Richter
Turning on receive and/or transmit checksum offload support on the OSA card requires 2 commands: 1. start command which replies with available features 2. enable command to turn on selected features. The current version does not check the reply of the start command and simply uses the returned value to enable offload features. When the start command returns zero, this leads to a situation where no checksum offload is turned on by the hardware. Even worse no error indication is returned. The Linux kernel assumes the OSA card performs RX/TX checksum offload, but the hardware does not perform any checksum verification at all. This patch checks the return of the start and enable command responses from the hardware and turns off checksum offloading if the commands fails or does not respond with the correct bit setting. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12s390/qeth: rework RX/TX checksum offloadThomas Richter
Rework the RX/TX checksum offloading command sequence to use the provided function call back mechanims to return card data to the device driver. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-20s390/net: use net core MTU range checkingJarod Wilson
ctcm: - min_mtu = 576, max_mtu = 65527 netiucv: - min_mtu = 576, max_mtu = 65535 qeth: - min_mtu = 64, max_mtu = 65535 CC: netdev@vger.kernel.org CC: linux-s390@vger.kernel.org CC: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13s390/lcs: remove trailing space at end of dev_err messageColin Ian King
There is a trailing white space at the end of a dev_err message that does nothing useful - remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13s390/netiucv: improve checking of sysfs attribute bufferUrsula Braun
High values are always wrong for netiucv's sysfs attribute "buffer". But the current code does not detect values between 2**31 and 2**32 as invalid. Choosing type "unsigned int" for variable "bs1" and making use of "kstrtouint()" improves the syntax checking for "buffer". Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13s390/netiucv: get rid of one memcpy in netiucv_printuserUrsula Braun
Save a memcpy in netiucv_printuser(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16s390/qeth: fix setting VIPA addressThomas Richter
commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") restructured the internal address handling. This work broke setting a virtual IP address. The command echo 10.1.1.1 > /sys/bus/ccwgroup/devices/<device>/vipa/add4 fails with file exist error even if the IP address has not been set before. It turned out that the search result for the IP address search is handled incorrectly in the VIPA case. This patch fixes the setting of an virtual IP address. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16qeth: do not turn on SG per defaultUrsula Braun
According to recent performance measurements, turning on net_device feature NETIF_F_SG only behaves well, but turning on feature NETIF_F_GSO shows bad results. Since the kernel activates NETIF_F_GSO automatically as soon as the driver configures feature NETIF_F_SG, qeth should not activate feature NETIF_F_SG per default, until the qeth problems with NETIF_F_GSO are solved. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16qeth: do not limit number of gso segmentsUrsula Braun
To reduce the need of skb_linearize() calls, gso_max_segs of qeth net_devices had been limited according to the maximum number of qdio SBAL elements. But a gso segment cannot be larger than the mtu-size, while an SBAL element can contain up to 4096 bytes. The gso_max_segs limitation limits the maximum packet size given to the qeth driver. Performance measurements with tso-enabled qeth network interfaces and mtu-size 1500 showed, that the disadvantage of smaller packets is much more severe than the advantage of fewer skb_linearize() calls. This patch gets rid of the gso_max_segs limitations in the qeth driver. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16qeth: check not more than 16 SBALEs on the completion queueUrsula Braun
af_iucv socket programs with HiperSockets as transport make use of the qdio completion queue. Running such an af_iucv socket program may result in a crash: [90341.677709] Oops: 0038 ilc:2 [#1] SMP [90341.677743] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.6.0-20160720.0.0e86ec7.5e62689.fc23.s390xperformance #1 [90341.677744] Hardware name: IBM 2964 N96 703 (LPAR) [90341.677746] task: 00000000edb79f00 ti: 00000000edb84000 task.ti: 00000000edb84000 [90341.677748] Krnl PSW : 0704d00180000000 000000000075bc50 (qeth_qdio_input_handler+0x258/0x4e0) [90341.677756] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 000003d10391e900 0000000000000001 00000000e61e6000 0000000000000005 [90341.677759] 0000000000a9e6ec 5420040001a77400 0000000000000001 000000000000006f [90341.677761] 00000000e0d83f00 0000000000000003 0000000000000010 5420040001a77400 [90341.677784] 000000007ba8b000 0000000000943fd0 000000000075bc4e 00000000ed3b3c10 [90341.677793] Krnl Code: 000000000075bc42: e320cc180004 lg %r2,3096(%r12) 000000000075bc48: c0e5ffffc5cc brasl %r14,7547e0 #000000000075bc4e: 1816 lr %r1,%r6 >000000000075bc50: ba19b008 cs %r1,%r9,8(%r11) 000000000075bc54: ec180041017e cij %r1,1,8,75bcd6 000000000075bc5a: 5810b008 l %r1,8(%r11) 000000000075bc5e: ec16005c027e cij %r1,2,6,75bd16 000000000075bc64: 5090b008 st %r9,8(%r11) [90341.677807] Call Trace: [90341.677810] ([<000000000075bbc0>] qeth_qdio_input_handler+0x1c8/0x4e0) [90341.677812] ([<000000000070efbc>] qdio_kick_handler+0x124/0x2a8) [90341.677814] ([<0000000000713570>] __tiqdio_inbound_processing+0xf0/0xcd0) [90341.677818] ([<0000000000143312>] tasklet_action+0x92/0x120) [90341.677823] ([<00000000008b6e72>] __do_softirq+0x112/0x308) [90341.677824] ([<0000000000142bce>] irq_exit+0xd6/0xf8) [90341.677829] ([<000000000010b1d2>] do_IRQ+0x6a/0x88) [90341.677830] ([<00000000008b6322>] io_int_handler+0x112/0x220) [90341.677832] ([<0000000000102b2e>] enabled_wait+0x56/0xa8) [90341.677833] ([<0000000000000000>] (null)) [90341.677835] ([<0000000000102e32>] arch_cpu_idle+0x32/0x48) [90341.677838] ([<000000000018a126>] cpu_startup_entry+0x266/0x2b0) [90341.677841] ([<0000000000113b38>] smp_start_secondary+0x100/0x110) [90341.677843] ([<00000000008b68a6>] restart_int_handler+0x62/0x78) [90341.677845] ([<00000000008b6588>] psw_idle+0x3c/0x40) [90341.677846] Last Breaking-Event-Address: [90341.677848] [<00000000007547ec>] qeth_dbf_longtext+0xc/0xc0 [90341.677849] [90341.677850] Kernel panic - not syncing: Fatal exception in interrupt qeth_qdio_cq_handler() analyzes SBALs on this completion queue, but does not observe the limit of 16 SBAL elements per SBAL. This patch adds the additional check to process not more than 16 SBAL elements. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16s390/qeth: allow hsuid configuration in DOWN stateUrsula Braun
The qeth IP address mapping logic has been reworked recently. It causes now problems to specify qeth sysfs attribute "hsuid" in DOWN state, which is allowed. Postpone registering or deregistering of IP-addresses in this case. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16s390/qeth: use ip_lock for hsuid configurationUrsula Braun
qeth_l3_dev_hsuid_store() changes the ip hash table, which requires the ip_lock. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16qeth: restore device features after recoveryHans Wippel
After device recovery, only a basic set of network device features is enabled on the device. If features like checksum offloading or TSO were enabled by the user before the recovery, this results in a mismatch between the network device features, that the kernel assumes to be enabled on the device, and the features actually enabled on the device. This patch tries to restore previously set features, that require changes on the device, after the recovery of a device. In case of an error, the network device's features are changed to contain only the features that are actually turned on. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en.h drivers/net/ethernet/mellanox/mlx5/core/en_main.c drivers/net/usb/r8152.c All three conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04qeth: delete napi struct when removing a qeth deviceUrsula Braun
A qeth_card contains a napi_struct linked to the net_device during device probing. This struct must be deleted when removing the qeth device, otherwise Panic on oops can occur when qeth devices are repeatedly removed and added. Fixes: a1c3ed4c9ca ("qeth: NAPI support for l2 and l3 discipline") Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Tested-by: Alexander Klein <ALKL@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-28 03:57:50 +0000