summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid
AgeCommit message (Collapse)Author
2022-01-05scsi: aacraid: Fix spelling of "its"Randy Dunlap
Use the possessive "its" instead of the contraction "it's" in user messages. Link: https://lore.kernel.org/r/20211223061119.18304-1-rdunlap@infradead.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: aacraid: Switch to attribute groupsBart Van Assche
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-12-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: aacraid: Call scsi_done() directlyBart Van Assche
The aacraid driver invokes scmd->scsi_done(scmd) for two types of SCSI commands: - SCSI commands initialized by the SCSI mid-layer. - SCSI commands initialized by aac_probe_container(). The processing sequence for SCSI commands allocated by aac_probe_container() is as follows: aac_probe_container() -> _aac_probe_container(scmd, aac_probe_container_callback1) -> scmd->SCp.ptr = aac_probe_container_callback1 -> aac_fib_send(..., _aac_probe_container1, scmd) -> fibptr->callback = _aac_probe_container1 -> fibptr->callback_data = scmd fibptr->callback(scmd) -> _aac_probe_container1(scmd, fibptr) [ ... ] -> _aac_probe_container2(scmd, fibptr) -> Call scmd->SCp.ptr == aac_probe_container_callback1 -> scmd->device = NULL; The processing sequence for SCSI commands allocated by the SCSI mid-layer if _aac_probe_container() is called is as follows: aac_queuecommand() -> aac_scsi_cmd() -> _aac_probe_container(scmd, aac_probe_container_callback2) -> scmd->SCp.ptr = aac_probe_container_callback2 -> aac_fib_send(..., _aac_probe_container1, scmd) fibptr->callback(scmd) -> _aac_probe_container1(scmd, fibptr) [ ... ] -> _aac_probe_container2(scmd, fibptr) -> Call scmd->SCp.ptr == aac_probe_container_callback2 Preserve the existing call sequences by calling scsi_done() for commands submitted by the mid-layer or aac_probe_container_scsi_done() for commands submitted by aac_probe_container(). Link: https://lore.kernel.org/r/20211007202923.2174984-17-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: aacraid: Introduce aac_scsi_done()Bart Van Assche
This patch does not change any functionality but makes the next patch in this series easier to read. Link: https://lore.kernel.org/r/20211007202923.2174984-16-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-14-bvanassche@acm.org Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-18scsi: aacraid: Remove an unused includeChristoph Hellwig
flush_kernel_dcache_page() is not used by aacraid, and this header already comes in through the scatterlist/block headers anyway. Link: https://lore.kernel.org/r/20210712060928.4161649-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10scsi: aacraid: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct aac_raw_io2 instead of one-element array, and use the struct_size() helper. Also, this helps with the ongoing efforts to enable -Warray-bounds by fixing the following warnings: drivers/scsi/aacraid/aachba.c: In function ‘aac_build_sgraw2’: drivers/scsi/aacraid/aachba.c:3970:18: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 3970 | if (rio2->sge[j].length % (i*PAGE_SIZE)) { | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:3974:27: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 3974 | nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE)); | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4011:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4011 | for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) { | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4012:24: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4012 | addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE; | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4014:33: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4014 | sge[pos].addrHigh = rio2->sge[i].addrHigh; | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4015:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4015 | if (addr_low < rio2->sge[i].addrLow) | ~~~~~~~~~^~~ [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60414244.ur4%2FkI+fBF1ohKZs%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210421185611.GA105224@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Build-tested-by: kernel test robot <lkp@intel.com>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-15scsi: aacraid: Remove an unused functionBart Van Assche
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-7-bvanassche@acm.org Cc: aacraid@microsemi.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-30scsi/aacraid: Delete obsolete TODO fileWang Qing
The TODO file here has not been updated from 2.6.12 for more than 15 years. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15scsi: aacraid: Fix misspelling of _aac_rx_init()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:544: warning: expecting prototype for aac_rx_init(). Prototype was for _aac_rx_init() instead Link: https://lore.kernel.org/r/20210303144631.3175331-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: aacraid: Repair formatting issue in aac_handle_sa_aif()'s headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commsup.c:334: warning: expecting prototype for fib_deallocate(). Prototype was for fib_dealloc() instead drivers/scsi/aacraid/commsup.c:1961: warning: expecting prototype for aac_handle_sa_aif Handle a message from the firmware(). Prototype was for aac_handle_sa_aif() instead Link: https://lore.kernel.org/r/20210303144631.3175331-17-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: aacraid: Fix incorrect spelling of aac_send_raw_srb()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commctrl.c:480: warning: expecting prototype for aac_send_raw_scb(). Prototype was for aac_send_raw_srb() instead Link: https://lore.kernel.org/r/20210303144631.3175331-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: aacraid: Fix a few incorrectly named functionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:796: warning: expecting prototype for aac_probe_container(). Prototype was for aac_probe_container_callback1() instead drivers/scsi/aacraid/aachba.c:850: warning: expecting prototype for InqStrCopy(). Prototype was for inqstrcpy() instead drivers/scsi/aacraid/aachba.c:1814: warning: expecting prototype for Process topology change(). Prototype was for aac_get_safw_ciss_luns() instead Link: https://lore.kernel.org/r/20210303144631.3175331-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: aacraid: Avoid setting message byte on completionHannes Reinecke
The aacraid controller is a RAID controller and the driver will never see any SCSI messages. Plus it's quite pointless to set the message byte if the host byte is already set, as the latter takes precedence during error recovery. Drop the message byte values for the final result. Link: https://lore.kernel.org/r/20210113090500.129644-16-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-02scsi: aacraid: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Link: https://lore.kernel.org/r/e4e25e57964a69f7173f868ff93df9d6d08f360f.1605896060.git.gustavoars@kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25scsi: aacraid: Use generic power managementVaibhav Gupta
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-6-vaibhavgupta40@gmail.com Acked-by: Balsundar P <balsundar.p@microchip.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25scsi: aacraid: Drop pci_enable_wake() from .resumeVaibhav Gupta
The driver calls pci_enable_wake(...., false) in aac_resume(), and there is no corresponding pci_enable_wake(...., true) in aac_suspend(). Either it should do enable-wake the device in .suspend() or should not invoke pci_enable_wake() at all. Concluding that this is a bug and PCI core calls pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from aac_resume(). Link: https://lore.kernel.org/r/20201102164730.324035-5-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: aacraid: Improve compat_ioctl handlersArnd Bergmann
The use of compat_alloc_user_space() can be easily replaced by handling compat arguments in the regular handler, and this will make it work for big-endian kernels as well, which at the moment get an invalid indirect pointer argument. Calling aac_ioctl() instead of aac_compat_do_ioctl() means the compat and native code paths behave the same way again, which they stopped when the adapter health check was added only in the native function. Link: https://lore.kernel.org/r/20201030164450.1253641-1-arnd@kernel.org Fixes: 572ee53a9bad ("scsi: aacraid: check adapter health") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-10-02scsi: aacraid: Add a missing iounmap callTomas Henzl
Add a missing resource cleanup in _aac_reset_adapter. Link: https://lore.kernel.org/r/20200926150015.6187-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-15scsi: aacraid: Make some symbols static in aachba.cJason Yan
This eliminates the following sparse warning: drivers/scsi/aacraid/aachba.c:245:5: warning: symbol 'aac_convert_sgl' was not declared. Should it be static? drivers/scsi/aacraid/aachba.c:293:5: warning: symbol 'acbsize' was not declared. Should it be static? drivers/scsi/aacraid/aachba.c:324:5: warning: symbol 'aac_wwn' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200912033749.142488-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: aacraid: Remove erroneous fallthrough annotationDan Carpenter
This fallthrough annotation is unreachable so we can delete it. Link: https://lore.kernel.org/r/20200825112003.GD285523@mwanda Fixes: c4e2fbca374b ("scsi: aacraid: Reworked scsi command submission path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: aacraid: Remove pci-dma-compat wrapper APISuraj Upadhyay
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as they create unnecessary midlayering for include/linux/dma-mapping.h API. Instead use dma-mapping.h API directly. The patch has been generated with the coccinelle script below. Compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Link: https://lore.kernel.org/r/f8d4778440d55ba26c04eef0f7d63fb211a39443.1596045683.git.usuraj35@gmail.com Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-07-24scsi: aacraid: Add descriptions for missing parametersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p2' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p3' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p4' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p5' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p6' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'status' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r1' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r2' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r3' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r4' not described in 'src_sync_cmd' drivers/scsi/aacraid/src.c:203: warning: Excess function parameter 'ret' description in 'src_sync_cmd' drivers/scsi/aacraid/src.c:609: warning: Function parameter or member 'dev' not described in 'aac_src_ioremap' drivers/scsi/aacraid/src.c:639: warning: Function parameter or member 'dev' not described in 'aac_srcv_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: aacraid: Add missing description for 'dev'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/nark.c:31: warning: Function parameter or member 'dev' not described in 'aac_nark_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: aacraid: Add missing description for 'dev'Lee Jones
And clean-up a couple of whitespace issues while we're here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rkt.c:64: warning: Function parameter or member 'dev' not described in 'aac_rkt_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: aacraid: Add descriptions for missing parametersLee Jones
Also clean-up some white space issues while we're here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p2' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p3' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p4' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p5' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p6' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r1' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r2' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r3' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r4' not described in 'sa_sync_cmd' drivers/scsi/aacraid/sa.c:290: warning: Function parameter or member 'dev' not described in 'aac_sa_ioremap' Link: https://lore.kernel.org/r/20200721164148.2617584-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fill in the very parameter descriptions for rx_sync_cmd()Lee Jones
... and document aac_rx_ioremap() 'dev' param. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p5' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p6' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'status' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r1' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Excess function parameter 'ret' description in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:450: warning: Function parameter or member 'dev' not described in 'aac_rx_ioremap' Link: https://lore.kernel.org/r/20200713080001.128044-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a bunch of function header issuesLee Jones
Some parameters not documented. Others misspelled. Also, functions must follow directly after the header that documents them. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commsup.c:223: warning: Function parameter or member 'scmd' not described in 'aac_fib_alloc_tag' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'qid' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'hw_fib' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'priority' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'fib' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:943: warning: Function parameter or member 'fibptr' not described in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:943: warning: Excess function parameter 'fib' description in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'dev' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'fibptr' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:2428: warning: Function parameter or member 'data' not described in 'aac_command_thread' drivers/scsi/aacraid/commsup.c:2428: warning: Excess function parameter 'dev' description in 'aac_command_thread' Link: https://lore.kernel.org/r/20200713080001.128044-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Demote partially documented function headerLee Jones
This should be populated by someone who knows the meaning of all the params. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isAif' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isFastResponse' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'aif_fib' not described in 'aac_intr_normal' Link: https://lore.kernel.org/r/20200713080001.128044-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Remove unused variable 'status'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_aif_callback’: drivers/scsi/aacraid/dpcsup.c:232:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 232 | int status; | ^~~~~~ Link: https://lore.kernel.org/r/20200713080001.128044-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix logical bug when !DBGLee Jones
When DBG is not enabled FIB_COUNTER_INCREMENT() results in an empty statement, leaving the contents of if() and else() empty. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_response_normal’: drivers/scsi/aacraid/dpcsup.c:105:50: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 105 | FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); | ^ drivers/scsi/aacraid/dpcsup.c: In function ‘aac_intr_normal’: drivers/scsi/aacraid/dpcsup.c:411:30: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 411 | aac_config.AsyncRecved); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a few kerneldoc issuesLee Jones
Functions must follow imediately after the header documenting them and all parameters must be present. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'dev' description in 'AAC_DEBUG_PREAMBLE' drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'arg' description in 'AAC_DEBUG_PREAMBLE' drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'dev' not described in 'open_getadapter_fib' drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'arg' not described in 'open_getadapter_fib' drivers/scsi/aacraid/commctrl.c:458: warning: Cannot understand * on line 458 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713080001.128044-3-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Repair two kerneldoc headersLee Jones
The function headers for aac_get_config_status() and aac_get_containers() have suffered bitrot where the documentation hasn't kept up with the API. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' Link: https://lore.kernel.org/r/20200713080001.128044-2-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a bunch of function doc formatting errorsLee Jones
And a few missing/excessive parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:568: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_name' drivers/scsi/aacraid/aachba.c:796: warning: Function parameter or member 'scsicmd' not described in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'dev' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'cid' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:1105: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_serial' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'phys_luns' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'rescan' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:3394: warning: Cannot understand * on line 3394 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3687: warning: Cannot understand * on line 3687 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3752: warning: Cannot understand * on line 3752 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3795: warning: Cannot understand * on line 3795 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713074645.126138-29-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a couple of small kerneldoc issuesLee Jones
Most likely caused by bitrot (docs not keeping in sync with API). Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’: drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] drivers/scsi/aacraid/linit.c:243: warning: Function parameter or member 'shost' not described in 'aac_queuecommand' drivers/scsi/aacraid/linit.c:243: warning: Excess function parameter 'done' description in 'aac_queuecommand' drivers/scsi/aacraid/linit.c:1176: warning: Excess function parameter 'inode' description in 'aac_cfg_ioctl' Link: https://lore.kernel.org/r/20200713074645.126138-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Provide suggested curly braces around empty body of if()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’: drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] 368 | param->heads, param->sectors, num)); | ^ Link: https://lore.kernel.org/r/20200713074645.126138-24-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-07PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'Luc Van Oostenryck
The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.com https://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com] Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-14scsi: aacraid: Fix an oops in error handlingDan Carpenter
If the memdup_user() function fails then it results in an Oops in the error handling code when we try to kfree() and error pointer. Link: https://lore.kernel.org/r/20200513093703.GB347693@mwanda Fixes: 8d925b1f00e6 ("scsi: aacraid: Use memdup_user() as a cleanup") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: aacraid: Use memdup_user() as a cleanupZou Wei
Fix coccicheck warning which recommends to use memdup_user(). This patch fixes the following coccicheck warning: drivers/scsi/aacraid/commctrl.c:516:15-22: WARNING opportunity for memdup_user Link: https://lore.kernel.org/r/1587868964-75969-1-git-send-email-zou_wei@huawei.com Fixes: 4645df1035b3 ("[PATCH] aacraid: swapped kmalloc args.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: aacraid: Make some symbols staticZou Wei
Fix the following sparse warnings: drivers/scsi/aacraid/linit.c:867:6: warning: symbol 'aac_tmf_callback' was not declared. Should it be static? drivers/scsi/aacraid/linit.c:1081:5: warning: symbol 'aac_eh_host_reset' was not declared. Should it be static? drivers/scsi/aacraid/commsup.c:2354:5: warning: symbol 'aac_send_safw_hostttime' was not declared. Should it be static? drivers/scsi/aacraid/commsup.c:2383:5: warning: symbol 'aac_send_hosttime' was not declared. Should it be static? Link: https://lore.kernel.org/r/1588240932-69020-1-git-send-email-zou_wei@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: core: Remove 'list' entry from struct scsi_cmndHannes Reinecke
Leftover from cmd_list removal. Link: https://lore.kernel.org/r/20200507062642.100612-1-hare@suse.de Fixes: c5a9707672fe ("scsi: core: Remove cmd_list functionality") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: aacraid: Fix error handling paths in aac_probe_one()Christophe JAILLET
If 'scsi_host_alloc()' or 'kcalloc()' fail, 'error' is known to be 0. Set it explicitly to -ENOMEM before branching to the error handling path. While at it, remove 2 useless assignments to 'error'. These values are overwridden a few lines later. Link: https://lore.kernel.org/r/20200412094039.8822-1-christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is a batch of changes that didn't make it in the initial pull request because the lpfc series had to be rebased to redo an incorrect split. It's basically driver updates to lpfc, target, bnx2fc and ufs with the rest being minor updates except the sr_block_release one which fixes a use after free introduced by the removal of the global mutex in the first patch set" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits) scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear scsi: bnx2fc: fix boolreturn.cocci warnings scsi: zfcp: use fallthrough; scsi: aacraid: do not overwrite retval in aac_reset_adapter() scsi: sr: Fix sr_block_release() scsi: aic7xxx: Remove more FreeBSD-specific code scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug scsi: ufs: set device as active power mode after resetting device scsi: iscsi: Report unbind session event when the target has been removed scsi: lpfc: Change default SCSI LUN QD to 64 scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted scsi: libfc: If PRLI rejected, move rport to PLOGI state scsi: bnx2fc: Update the driver version to 2.12.13 scsi: bnx2fc: Fix SCSI command completion after cleanup is posted scsi: bnx2fc: Process the RQE with CQE in interrupt context scsi: target: use the stack for XCOPY passthrough cmds scsi: target: increase XCOPY I/O size scsi: target: avoid per-loop XCOPY buffer allocations scsi: target: drop xcopy DISK BLOCK LENGTH debug ...
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-03-31scsi: aacraid: do not overwrite retval in aac_reset_adapter()Hannes Reinecke
'retval' got assigned a value twice, causing the original value to be lost. Link: https://lore.kernel.org/r/20200331084111.95039-1-hare@suse.de Fixes: 3d3ca53b1639 ("scsi: aacraid: use scsi_host_(block,unblock) to block I/O") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-24block: move struct partition out of genhd.hChristoph Hellwig
struct partition is the on-disk format of a MSDOS partition table entry. Move it out of genhd.h into a new msdos_partition.h header and give it a msdos_ prefix to avoid confusion. Also move the magic number from block/partitions/msdos.h to the new header so that it can be used by the SCSI drivers looking at the DOS partition tables. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2024-06-25 21:17:03 +0000