summaryrefslogtreecommitdiff
path: root/drivers/scsi/bfa/bfi.h
AgeCommit message (Collapse)Author
2016-05-19scripts/spelling.txt: add "fimware" misspellingKees Cook
A few instances of "fimware" instead of "firmware" were found. Fix these and add it to the spelling.txt file. Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-02bfa: File header and user visible string changesAnil Gurumurthy
Signed-off-by: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02bfa: Update copyright messagesAnil Gurumurthy
Signed-off-by: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2013-12-19[SCSI] bfa: Observed auto D-port mode instead of manualVijaya Mohan Guvva
Observed Auto mode in the HBA side while doing manual D-Port test on the switch side. Mode is not passed to BFA from firmware when the test is triggered by switch side. BFA just blindly using Auto mode. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] bfa: Firmware patch simplificationVijaya Mohan Guvva
This patch includes change to enable firmware patch simplication feature. This feature is targeted to address the requirement to have independent patch release for firmware. Prior to 3.2.3, releasing a patch fix for firmware requires changes to bfa, to use new firmware images. But with these changes, if the new firmware is flashed on to the HBA with brocade adapter management utilites, driver uses the new firmware after checking the patch release byte in the firmware version. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] bfa: fru vpd date update changesVijaya Mohan Guvva
1. While FRU VPD data update, inform firmware to send a completion event on I2C bus. Without this change, firmware used to send completion message on I2C bus for every chunk of FRU VPD update. 2. Support for FRU VPN update on CHINOOK2 cards. 3. Append port count to the model name to differentiate between single port and dual port model of 1860. 4. Update the size of the model name to 16bytes Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] bfa: kdump fix on 815 and 825 adaptersVijaya Mohan Guvva
Root cause: When kernel crashes, On brocade 815/825 adapters, bfa IOC state machine and FW doesn't get a notification and hence are not cleanly shutdown. So registers holding driver/IOC state information are not reset back to valid disabled/parking values. This causes subsequent driver initialization to fail during kdump kernel boot. Fix description: during the initialization of first PCI function, reset corresponding register when unclean shutown is detect by reading chip registers. This will make sure that ioc/fw gets clean re-initialization. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] bfa: Add dynamic diagnostic port supportVijaya Mohan Guvva
D-Port is a new port type created with the intention of running link level diagnostic tests like loopback, traffic test. In static D-port mode, user configures the port to D-port mode and starts the test, but in dynamic D-port, once the Brocade switch port is configured to D-port, it will reject the regular FLOGI from HBA with reason that it is in D-port mode. So based on the reason code HBA port will turn itself into D-port and start diagnostic test. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@brocade.com> Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add support to read/update the FRU data.Krishna Gudipati
- Add FRU sub-module to support FRU read/write/update. - Add support to read/write from the temp FRU module. [jejb: fix checkpatch issues] Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add support to configure min/max bandwidth for a pcifnKrishna Gudipati
- Added support to configure minimum bandwidth for a pcifn. - Minimum bandwith is guaranteed at per queue level. - Added support to update pcifn bandwidth dynamically without a server reboot. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add diagnostic port (D-Port) supportKrishna Gudipati
- Introduced support for D-Port which is a new port mode during which link level diagnostics can be run. - Provided mechanism to dynamically configure D-Port and initiate diagnostic tests to isolate any link level issues. - In D-Port mode, the HBA port does not participate in fabric or login to the remote device or run data traffic. - Diagnostic tests include running various loopback tests in conjunction with the attached device. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add support to have mfg date as part of adapter attributesKrishna Gudipati
Made changes to expose mfg day/month/year as part of the adapter attributes for user space applications. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.Krishna Gudipati
- Added support to post vendor unique events on fc_host. - Supports adapter, port, ioc, flash and remote port based AEN events. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added support to query PHY.Krishna Gudipati
- Added PHY sub-module. - Implemented interface to obtain stats and to read/update the fw from the PHY module. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added HBA diagnostics support.Krishna Gudipati
- Added diagnostics sub-module to BFA. - Implemented interface to perform memtest/loopback test and some other diagnostics tests. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added support for flash configurationKrishna Gudipati
- Added flash sub-module. - Implemented the interface to read/erase/update flash partition. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added support to obtain SFP info.Krishna Gudipati
- Added SFP sub-module to BFA. - Added interface to collect sfp media info and sfp speed. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added support for CEE info and stats query.Krishna Gudipati
- Added CEE sub-module. - Added support to collect stats/cee module info using BSG interface. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: DMA memory allocation enhancement.Krishna Gudipati
- Modified the design such that each BFA sub-module will provide the amount of DMA and KVA memory needed by it and queues the same request to the global dma and kva info queues. - During the memory allocation we iterate over this queue to allocate the dma and kva memory requested by sub-modules. - The change is needed to avoid requesting the aggregate amount of memory needed by all the BFA sub-modules as one contiguous chunk. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.Krishna Gudipati
- Introduced partitioning of the BFA resources. - Added h/w queue ID in CPE messages, firmware uses h/w queue ID from messages to pick a matching RME queue. - Added message header to bfa_reqq_produce(). h/w queue ID is set in the message header and firmware modules use h/w queue ID from message header instead of from cpqe event. - Made changes to allow using all 256 queues of Brocade-1860 asic. Previously only a single queue per queue group was used. - Added function tag to BFI message header. Only used by FC BFI messages. Used to translate host tag to firmware tag. bfa_lpuid() is changed to bfa_fn_lpu() that encodes both PCI function and port ID in BFI message header. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.Krishna Gudipati
- If flash controller is halted unconditionally, this results in illegal write access to flash controller register domain. Since flash controller registers are only accessible once s_clk is started - added logic to check for WGN status and halt flash controller only if it is already running. - Added check to wait for flash controller halt to be completed before proceeding with s_clk/l_clk initializations. - Removed unnecessary reset logic for PMM 1T memory and moved memory initialization after flash access enable. - Disable Brocade-1860 asic MBOX interrupt before PLL initialization. - Remove reset enable for S_CLK/L_CLK after both PLL initializations are complete. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added Fabric Assigned Address(FAA) supportKrishna Gudipati
- Updated/added data structures and definitions to support FAA protocol. - Modified the IOC state machine to support FAA. - Introduced FAA feature configuration - enable/disable/query. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: IOC bug fixes.Krishna Gudipati
- Add logic to handle the case where PCI mapping goes away when IOCPF state machine is waiting for semaphore. - Added logic to unlock hw semaphore if the previos FW boot was from flash based and the current FW initialization attempt is from OS. - Added fix to update hbfails and hb_count stats during hwerror event. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Enable ASIC block configuration and query.Krishna Gudipati
- Added ASIC block configuration APIs: - to create/delete/update the physical functions - to do adapter/port mode configuration - to query the current ASIC block configuration. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Brocade-1860 Fabric Adapter 16Gbs support and flash controller ↵Krishna Gudipati
fixes. - Added support for 16Gbps. - Added logic to flush pending mailbox command queue when IOC is disabled. - Fix to Halt the flash controller during fw initialization - since when asic blck is programmed flash controller's continuous access blocks f/w access to flash. - Added new asic based card types and modified IOC get card model routine. - Added PLL init fix to do LPU reset every time we do a memory initialization, since not doing so will cause LPU to be uninitialized during driver load. - Added fix to Halt flash controller before PLL initialization. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: IOC and PLL init changes for Brocade-1860 Fabric Adapter.Krishna Gudipati
- Introduced IOC poll mechanism which replaces current interrupt based FW READY method. - The timer based poll routine in IOC will query the ioc_fwstate register to see if there is a state change in FW, and sends the READY event. - Bug fixes in the new asic PLL initialization. - Added logic to handle CPE/RME queue interrupts before iocfc config done. 1. Use the queue_process flag to see if iocfc configuration is done in INTX mode. 2. Split the MSIX handler installation in two - one for IOC intr handler and the other for cpe/rme queue handler - and delay assigning queue handlers until iocfc config is done in MSIX mode. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Changes to support vport disable and enable operations.Krishna Gudipati
Made changes to FCS lport, vport state machines to support vport enable / disable operations. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Brocade-1860 Fabric Adapter Hardware EnablementKrishna Gudipati
- Added support for Brocade-1860 Fabric Adapter. - Made changes to support single firmware image per asic type. - Combined bfi_cbreg.h and bfi_ctreg.h defines into bfi_reg.h with only minimal defines used by host. - Added changes to setup CPE/RME Queue register offsets based on firmware response. - Removed queue register offset initializations and added register offsets to BFI config response message. - Added Brocade-1860 asic specific interrupt status definitions and mailbox interfaces. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Add pbc port disable check and fix LPS message nameKrishna Gudipati
- Add PBC port Disabled condition check. - Rename incorrectly named LPS I2H messages. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Introduce IOC event notification mechanism.Krishna Gudipati
Introduced a generic event notification callback function that receives IOC_ENABLED, IOC_DISABLED, IOC_FAILED events and notifies the modules registered for these events. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Introduced generic address len pair to represent DMA memory chunk.Krishna Gudipati
- Avoid the use of hardware defined structure bfi_sge_s for DMA requests in host. - Defined a generic address len pair to represent a DMA memory chunk (bfi_alen_s). Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2010-12-21[SCSI] bfa: remove all OS wrappersMaggie Zhang
Remove OS wrapper functions/macros, and as a result remove bfa_os_inc.h. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: remove all SCSI IO callbacksMaggie Zhang
Remove SCSI IO callbacks, and as a result remove bfa_cb_ioim.h. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: fix endianess sparse check warningsMaggie
First round of fix for the endianess check warnings from make C=2 CF="-D__CHECK_ENDIAN__". Signed-off-by: Maggie <xmzhang@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] bfa: fix comments for header filesJing Huang
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com) regarding comment blocks that begining with "/**". bfa driver comments currently do not follow kernel-doc convention, we hence replace all /** with /* and **/ with */. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16[SCSI] bfa: cleanup driverKrishna Gudipati
We have flattened the BFA hierarchy and also reduced the number of source and header files we used to have earlier. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>