summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpi3mr/mpi3mr_os.c
AgeCommit message (Collapse)Author
2022-08-22scsi: mpi3mr: Get target object based on rphySreekanth Reddy
When device is registered with the STL then get the corresponding device's target object using the rphy in below callback functions: - mpi3mr_target_alloc() - mpi3mr_slave_alloc() - mpi3mr_slave_configure() - mpi3mr_slave_destroy() Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add expander devices to STLSreekanth Reddy
Register/unregister the expander devices to SCSI Transport Layer(STL) whenever the corresponding expander is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Enable STL on HBAs where multipath is disabledSreekanth Reddy
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if multipath capability is disabled in the controller's firmware. Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to manage device's portSreekanth Reddy
Add the following helper functions: - Update the host phys with STL - Remove the device's SAS port with STL Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to retrieve device objectsSreekanth Reddy
Add the following helper functions: - Get the device's sas address by reading corresponding device's Device page0 - Get the expander object from expander list based on expander's handle - Get the target device object from target device list based on device's sas address - Get the expander device object from expander list based on expanders's sas address - Get hba port object from hba port table list based on port's port id Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Enable Enclosure device add eventSreekanth Reddy
Enable and process the Enclosure device add event. Link: https://lore.kernel.org/r/20220804131226.16653-5-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to issue config requestsSreekanth Reddy
Add framework to issue config requests commands to controller firmware. Link: https://lore.kernel.org/r/20220804131226.16653-3-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
2022-07-18scsi: mpi3mr: Delete a stray tabDan Carpenter
This code is indented one more tab than it should be. Link: https://lore.kernel.org/r/YtVCFshEJNC7ELid@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Reduce VD queue depth on detecting throttlingSreekanth Reddy
Reduce the VD queue depth on detecting the throttling condition. [mkp: incorporate fix for pointer cast issue reported by the test robot and Guenter Roeck] Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Resource Based MeteringSreekanth Reddy
Update driver to track cumulative pending large data size at the controller level and at the throttle group level. When one of the values meet or exceed the controller's firmware-determined high threshold value, then the driver will divert future selective I/O to the firmware. Once both controller level and at the throttle group level cumulative pending large data size reach controller's firmware determined low threshold value, then the driver will stop diverting I/Os to the firmware. Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: mpi3mr: Enable shared host tagsetSreekanth Reddy
Enable shared host tagset to make sure that total outstanding I/O count can not exceed controller's can_queue setting. Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-06blk-mq: Drop 'reserved' arg of busy_tag_iter_fnJohn Garry
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter function so it may be dropped. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-19scsi: mpi3mr: Add target device related sysfs attributesSreekanth Reddy
Add sysfs attributes for exposing target device details such as SAS address, firmware device handle, and persistent ID for the controller-attached devices and RAID volumes. Link: https://lore.kernel.org/r/20220517115310.13062-3-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: mpi3mr: Return I/Os to an unrecoverable HBA with DID_ERRORSreekanth Reddy
Complete all new I/O requests issued to an unrecoverable controller with DID_ERROR status instead of returning the I/O requests with SCSI_MLQUEUE_HOST_BUSY. This will prevent the infinite retries of the new I/Os when a controller is in an unrecoverable state. Link: https://lore.kernel.org/r/20220505184808.24049-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: mpi3mr: Hidden drives not removed during soft resetSreekanth Reddy
If any drive is missing during reset, the driver checks whether the device is exposed to the OS. If it is, then it removes the device from the OS and its own internal list. For hidden devices, even if they are found as missing during reset, the driver is not removing them from its internal list. Modify driver to remove hidden devices from the driver's target device list if they are missing during soft reset. Link: https://lore.kernel.org/r/20220505184808.24049-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: mpi3mr: Increase I/O timeout value to 60sSreekanth Reddy
Set each SCSI device's default I/O timeout and default error handling I/O timeout to 60s. Link: https://lore.kernel.org/r/20220505184808.24049-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Expose adapter state to sysfsSumit Saxena
Link: https://lore.kernel.org/r/20220429211641.642010-7-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for PEL commandsSumit Saxena
Implement driver support for management applications to enable persistent event log (PEL) notifications. Upon receipt of events, the driver will increment a sysfs variable named event_counter. The management application will poll for event_counter value changes and signal the application about events. Link: https://lore.kernel.org/r/20220429211641.642010-6-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for MPT commandsSumit Saxena
There are certain management commands which require firmware intervention. These commands are termed MPT commands. Add support for them. Link: https://lore.kernel.org/r/20220429211641.642010-5-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for driver commandsSumit Saxena
There are certain bsg commands which need to be completed by the driver without involving firmware. These requests are termed driver commands. Add support for these. Link: https://lore.kernel.org/r/20220429211641.642010-3-sumit.saxena@broadcom.com Reported by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add bsg device supportSumit Saxena
Create bsg device per controller for controller management purposes. bsg device nodes will be named /dev/bsg/mpi3mrctl0, /dev/bsg/mpi3mrctl1, etc. Link: https://lore.kernel.org/r/20220429211641.642010-2-sumit.saxena@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: mpi3mr: Fix flushing !WQ_MEM_RECLAIM events warningSreekanth Reddy
Fix the following warning by not allocating driver's event handling worker queue with WQ_MEM_RECLAIM flag enabled: workqueue: WQ_MEM_RECLAIM mpi3mr_fwevt_worker [mpi3mr] is flushing !WQ_MEM_RECLAIM events Link: https://lore.kernel.org/r/20220218180515.27455-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Update the copyright yearSreekanth Reddy
Update the copyright year to 2017-2022. Link: https://lore.kernel.org/r/20220210095817.22828-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Fix reporting of actual data transfer sizeSreekanth Reddy
The driver is missing to set the residual size while completing an I/O. Ensure proper data transfer size is reported to the kernel on I/O completion based on the transfer length reported by the firmware. Link: https://lore.kernel.org/r/20220210095817.22828-7-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Fix cmnd getting marked as in use foreverSreekanth Reddy
When a driver command which requires the driver to issue a follow up command using the same command frame is outstanding and a soft reset operation occurs, then that driver command frame is getting marked as in use permanently and won't be reused again. Clear the driver command frames while flushing out the outstanding commands and avoid issuing any new requests using these command frames while soft reset is going on. Link: https://lore.kernel.org/r/20220210095817.22828-6-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Fix hibernation issueSreekanth Reddy
Hibernation operation fails when it is issued for second time. This is because the driver is trying to release the IOC's PCI resources after setting power state to D3. Set the IOC's power state to D3 only after releasing the IOC's PCI resources. Link: https://lore.kernel.org/r/20220210095817.22828-5-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Update MPI3 headersSreekanth Reddy
Update MPI3 headers. Link: https://lore.kernel.org/r/20220210095817.22828-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Fix printing of pending I/O countSreekanth Reddy
Print proper pending I/O count after issuing target reset TM operation. Link: https://lore.kernel.org/r/20220210095817.22828-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: mpi3mr: Fix deadlock while canceling the fw eventSreekanth Reddy
During controller reset, the driver tries to flush all the pending firmware event works from worker queue that are queued prior to the reset. However, if any work is waiting for device addition/removal operation to be completed at the SML, then a deadlock is observed. This is due to the controller reset waiting for the device addition/removal to be completed and the device/addition removal is waiting for the controller reset to be completed. To limit this deadlock, continue with the controller reset handling without canceling the work which is waiting for device addition/removal operation to complete at SML. Link: https://lore.kernel.org/r/20220210095817.22828-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Enhanced Task Management Support Reply handlingSreekanth Reddy
Enhance driver to consider MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a success for TMs issued by it and check the pending I/Os to decide the success or failure of the task management requests instead of just considering the MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a failure of the task management request. Link: https://lore.kernel.org/r/20211220141159.16117-24-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Use TM response codes from MPI3 headersSreekanth Reddy
Remove locally defined TM response codes and use codes from MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-23-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add io_uring interface support in I/O-polled modeSreekanth Reddy
Add support for the io_uring interface in I/O-polled mode. This feature is disabled in the driver by default. To enable the feature, a module parameter "poll_queues" has to be set with the desired number of polling queues. When the feature is enabled, the driver reserves a certain number of operational queue pairs for the poll_queues either from the available queue pairs or creates additional queue pairs based on the operational queue availability. The Polling queues will have corresponding IRQ and ISR functions as similar to default queues. However, the IRQ line is disabled by the driver for poll_queues. Link: https://lore.kernel.org/r/20211220141159.16117-22-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Print cable mngnt and temp threshold eventsSreekanth Reddy
Print cable management & temperature threshold event data. Use vendor id & device id macro definitions from MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-21-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Support Prepare for Reset eventSreekanth Reddy
The IOC sends a Prepare for Reset Event to the host to prepare for a Soft Reset. This event data has two reason codes: 1. Start - The host is expected to gracefully quiesce all I/O within approximately 1 second. 2. Abort - The IOC is requesting to abort a previous Prepare for Reset Event request. Normal I/O may be resumed. Link: https://lore.kernel.org/r/20211220141159.16117-20-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add Event acknowledgment logicSreekanth Reddy
Add Event acknowledgment logic. Link: https://lore.kernel.org/r/20211220141159.16117-19-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Detect async reset that occurred in firmwareSreekanth Reddy
Detect asynchronous reset that occurred in the firmware by polling for reset history bit of IOC status register is set and if that bit is set, then the driver waits for the controller to become ready and then re-initializes the controller. Also reduce the time driver is waiting for the controller to acknowledge the reset action after issuing a specific reset action to the controller. The wait time is reduced from 510 seconds to 30 seconds. If the controller didn't acknowledge a specific reset action within the time interval then the driver marks the controller as unrecoverable instead of retrying two more times prior to giving up. Link: https://lore.kernel.org/r/20211220141159.16117-17-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Handle offline FW activation in graceful mannerSreekanth Reddy
Currently the driver marks the controller as unrecoverable if there is an asynchronous reset or fault during the initialization, reinitialization post reset, and OS resume. Enhance driver to retry the initialization, re-initialization, and resume sequences for a maximum of 3 times if the controller became faulty or asynchronously reset due to a firmware activation during the initialization sequence. Link: https://lore.kernel.org/r/20211220141159.16117-15-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Handle unaligned PLL in unmap cmndsSreekanth Reddy
The following special handling is needed for UNMAP commands issued to NVMe drives: - On B0 boards, if the parameter list length is greater than 24 and not a 16-byte multiple, then truncate the parameter list length to a 16-byte multiple. - On A0 boards, if the parameter list length is greater than block descriptor data length + 8, then truncate the parameter list length to block descriptor data length + 8 value. Link: https://lore.kernel.org/r/20211220141159.16117-10-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Increase internal cmnds timeout to 60sSreekanth Reddy
- Increase internal command timeout to 60 seconds. - Enable 16 device removal handshake processing in parallel in the device removal handshake infrastructure. Link: https://lore.kernel.org/r/20211220141159.16117-9-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Do access status validation before adding devicesSreekanth Reddy
Add validation for various access statuses prior to exposing attached target device to the operating system. Link: https://lore.kernel.org/r/20211220141159.16117-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add support for PCIe Managed Switch SES deviceSreekanth Reddy
The SAS4 Controller firmware exposes the SES devices in Managed PCIe Switch as a PCIe Device Type SCSI Device (MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE). Driver is enhanced to handle this device type by: - Exposing the device to the upper layers and - Not updating any hardware sectors & virtual boundary settings as these settings are needed only for NVMe devices. Link: https://lore.kernel.org/r/20211220141159.16117-7-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Update MPI3 headers - part1Sreekanth Reddy
Update MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-5-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Don't reset IOC if cmnds flush with reset statusSreekanth Reddy
Don't issue the soft reset if internal commands are flushed out with reset status. Soft reset needs to be issued only if commands are really timed out. Link: https://lore.kernel.org/r/20211220141159.16117-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-16scsi: mpi3mr: Fix duplicate device entries when scanning through sysfsSreekanth Reddy
When scanning devices through the 'scan' attribute in sysfs, the user will observe duplicate device entries in lsscsi command output. Set the shost's max_channel to zero to avoid this. Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: mpi3mr: Call scsi_done() directlyBart Van Assche
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-52-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24scsi: mpi3mr: Set up IRQs in resume pathKashyap Desai
Driver is not setting up IRQs in the resume path. As a result, hibernation path is broken and controller will not be operational after system is resumed. Set up IRQs to handle the hibernation case. Link: https://lore.kernel.org/r/20210818081755.1274470-1-kashyap.desai@broadcom.com Cc: sathya.prakash@broadcom.com Cc: thenzl@redhat.com Reported-by: Marco Patalano <mpatalan@redhat.com> Tested-by: Marco Patalano <mpatalan@redhat.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-12scsi: mpi3mr: Use the proper SCSI midlayer interfaces for PIMartin K. Petersen
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags Link: https://lore.kernel.org/r/20210806040023.5355-4-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Acked-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-08-01 04:03:24 +0000