summaryrefslogtreecommitdiff
path: root/drivers/scsi/qedf
AgeCommit message (Collapse)Author
2017-09-07Merge branch 'fixes' into miscJames Bottomley
2017-08-25scsi: qedf: drop bus reset handlerHannes Reinecke
qedf has a host reset handler, but as the bus reset handler is a stub always returning SUCCESS the host reset is never invoked. So drop the bus reset handler. Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qedf: Update driver version to 8.20.5.0.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qedf: Fix up modinfo parameter name for 'debug' in modinfo output.Chad Dupuis
Because we were passing 'qedf_debug' instead of 'debug' to the MODULE_PARM_DESC() macro, modinfo listed the parameter name as 'qedf_debug' instead of it's proper name 'debug'. Correct the parameter name. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qedf: Covert single-threaded workqueues to regular workqueues.Chad Dupuis
There is no ordering required for the various workqueues the driver uses so they can be converted to regular workqueues. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qedf: Corrent VLAN tag insertion in fallback VLAN case.Chad Dupuis
Currently in the driver the qedf_ctx attribute vlan_hw_insert is used to which whether to insert a VLAN tag in FIP frames (except for FIP VLAN request which is explicitly sent out untagged at least from the driver's point of view). When we receive a FIP VLAN response, we set qedf->vlan_hw_insert to 0 which makes the qedf_fip_send function insert the VLAN. However when we exhaust our FIP VLAN retries, we do not set qedf->vlan_hw_insert to 0 which means that the driver will not tag the FIP frame with the correct VLAN ID. The result that was observed on the wire is that some entity either in the LL2 or L2 firmware is adding a NULL VLAN tag which can cause FIP solicitation to fail. The offload FCoE frame function, qedf_xmit, does not use the vlan_hw_insert attribute to decide whether to tag frames with the FIP/FCoE VLAN. Instead it unilaterially tags the offload frames with the VLAN ID stored in qedf->vlan_id. This is the correct behavior so the driver can guarantee that non-offload FIP frames go out with the correct VLAN ID. Also use the Linux network layer helpers instead of doing the VLAN insert manually. Also fix setting the fallback VLAN so that it used the module parameter and is not hardcoded to 1002 (though 1002 is the default). [mkp: fixed typo] Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qedf: Use granted MAC from the FCF for the FCoE source address if it ↵Chad Dupuis
is available. Currently in the driver we've been using the fc_fcoe_set_mac() function to set the source MAC for FCoE traffic. This works well in most cases as it uses the spec. default FCF-MAC. However, if the administrator changes the FCF-MAC switch, then any FCoE traffic we send will be dropped by the switch. Instead we should check the granted MAC from the FLOGI payload and use that address if it is present. Otherwise, fall back to using the the default FCF-MAC and the fabric ID of the port as the FCoE MAC address. Once this address is known we need to set it when doing non-offload traffic, offload traffic and setting the data_src_address libfcoe uses for FIP keep alive messages. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qedf: Set WWNN and WWPN based on values from qed.Chad Dupuis
If dev_info.wwpn and dev_info.wwnn are set by qed use these values to set the WWNs of the port. Otherwise fall back to the old method using fcoe_wwn_from_mac(). Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-23scsi: qedf: Fix a potential NULL pointer dereferenceChristophe JAILLET
At the beginning of 'qedf_srr_compl()' and of 'qedf_rec_compl()', we check if 'orig_io_req' is NULL. If this happens, a NULL pointer dereference will occur in the error handling path. Fix it by adding an additional label in the error handling path in order to avoid this NULL pointer dereference. [mkp: typo] Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-26scsi: qedf: Limit number of CQsThomas Bogendoerfer
FCOE offloading failed with: [qed_sp_fcoe_func_start:150(sp-0-3b:00.02)]Cannot satisfy CQ amount. CQs requested 8, CQs available 6. Aborting function start [qed_fcoe_start:821()]Failed to start fcoe [__qedf_probe:3041]:6: Cannot start FCoE function. The reason is a newly introduced check in the qed main part. This change also provides the information about how many CQs are available, so we simply limit the number of requested CQs.. Fixes: 3c5da9427802 ("qed: Share additional information with qedf") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-12scsi: qedf: fix spelling mistake: "offlading" -> "offloading"Colin Ian King
Trivial fix to spelling mistake in QEDF_INFO message and remove duplicated "since" (thanks to Tyrel Datwyler for spotting the latter issue). Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc, qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with a host of minor and miscellaneous changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits) qla2xxx: Fix NVMe entry_type for iocb packet on BE system scsi: qla2xxx: avoid unused-function warning scsi: snic: fix a couple of spelling mistakes/typos scsi: qla2xxx: fix a bunch of typos and spelling mistakes scsi: lpfc: don't double count abort errors scsi: lpfc: spin_lock_irq() is not nestable scsi: hisi_sas: optimise DMA slot memory scsi: ibmvfc: constify dev_pm_ops structures. scsi: ibmvscsi: constify dev_pm_ops structures. scsi: cxlflash: Update debug prints in reset handlers scsi: cxlflash: Update send_tmf() parameters scsi: cxlflash: Avoid double free of character device scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. scsi: ufs: flush eh_work when eh_work scheduled. scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock scsi: sun_esp: fix device reference leaks scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init scsi: fnic: correct speed display and add support for 25,40 and 100G scsi: fnic: added timestamp reporting in fnic debug stats ...
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_pull & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12scsi: qedf: Merge a few quoted strings split across linesChristophe JAILLET
Merge some quoted strings to improve readability and to save some lines of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Use 'dma_zalloc_coherent' to reduce code verbosity.Christophe JAILLET
Replace some 'dma_alloc_coherent+memset' by some quivalent 'dma_zalloc_coherent' in order to reduce code verbosity Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Fix a return value in case of error in 'qedf_alloc_global_queues'Christophe JAILLET
We should return -ENOMEM in case of memory allocation error, as done elsewhere in this function. [mkp: fixed typo] Fixes: 61d8658b4a435 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Check if sense buffer has been allocated during completionDupuis, Chad
sc_cmd->sense_buffer is not guaranteed to be allocated so we need to sc_cmd->check if the pointer is NULL before trying to copy anything into it. Fixes the crash: [ 143.793176] [0000:00:00.0]:[qedf_eh_device_reset:626]: LUN RESET Issued... [ 143.802996] BUG: unable to handle kernel NULL pointer dereference at (null) [ 143.803063] IP: qedf_parse_fcp_rsp+0xe2/0x290 [qedf] [ 143.803077] PGD 0 [ 143.803078] P4D 0 [ 143.803103] Oops: 0002 [#1] SMP [ 143.803115] Modules linked in: msr(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) raw(E) scsi_transport_iscsi(E) br_netfilter(E) bridge(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl(E) sb_edac(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) xfs(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) ipmi_ssif(E) glue_helper(E) iTCO_wdt(E) iTCO_vendor_support(E) lpc_ich(E) ipmi_si(E) pcspkr(E) hpilo(E) ioatdma(E) cryptd(E) ipmi_devintf(E) hpwdt(E) mfd_core(E) shpchp(E) dca(E) thermal(E) pcc_cpufreq(E) ipmi_msghandler(E) acpi_cpufreq(E) af_packet(E) btrfs(E) xor(E) raid6_pq(E) sr_mod(E) cdrom(E) ata_generic(E) sd_mod(E) 8021q(E) garp(E) [ 143.803302] stp(E) llc(E) mrp(E) bnx2fc(E) cnic(E) uio(E) mgag200(E) ata_piix(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) ahci(E) fb_sys_fops(E) bnx2x(E) qedf(E) serio_raw(E) libahci(E) ttm(E) uhci_hcd(E) ehci_pci(E) qed(E) mdio(E) libcrc32c(E) ehci_hcd(E) crc32c_intel(E) drm(E) libata(E) usbcore(E) tg3(E) ptp(E) hpsa(E) pps_core(E) scsi_transport_sas(E) libphy(E) wmi(E) button(E) fcoe(E) libfcoe(E) libfc(E) scsi_transport_fc(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E) [ 143.803438] CPU: 31 PID: 494 Comm: kworker/31:2 Tainted: G E 4.12.0-rc1-69-default+ #1 [ 143.803461] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [ 143.803480] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [ 143.803496] task: ffff8804181a0000 task.stack: ffffc90003b64000 [ 143.803514] RIP: 0010:qedf_parse_fcp_rsp+0xe2/0x290 [qedf] [ 143.803529] RSP: 0018:ffffc90003b67dc8 EFLAGS: 00010246 [ 143.803544] RAX: 0000000000000000 RBX: ffff880401abdd48 RCX: 000000000000000c [ 143.803563] RDX: 0000000000000060 RSI: ffffffffa039c740 RDI: 0000000000000000 [ 143.803581] RBP: ffffc90003b67df0 R08: ffffffffa039dba8 R09: 0000000000000000 [ 143.803600] R10: 0000000000000000 R11: 0000000000000018 R12: 0000000000000000 [ 143.803619] R13: ffff88040ac80bc8 R14: 0000000000000008 R15: ffff880407c14008 [ 143.803638] FS: 0000000000000000(0000) GS:ffff88043f7c0000(0000) knlGS:0000000000000000 [ 143.804360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 143.805065] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 143.805753] Call Trace: [ 143.806436] qedf_process_tmf_compl+0x19/0x30 [qedf] [ 143.807124] qedf_process_cqe+0x265/0x280 [qedf] [ 143.807800] qedf_fp_io_handler+0x26/0x60 [qedf] [ 143.808469] process_one_work+0x138/0x370 [ 143.809133] worker_thread+0x4d/0x3b0 [ 143.809797] kthread+0x109/0x140 [ 143.810451] ? rescuer_thread+0x320/0x320 [ 143.811100] ? kthread_park+0x60/0x60 [ 143.811743] ret_from_fork+0x2c/0x40 Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Update version number to 8.18.22.0.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Add change_queue_depth member to scsi_host_template().Chad Dupuis
Add the change_queue_depth member to our SCSI host template so the queue depth of devices attached to qedf can be changed dynamically. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Change cmd_per_lun in scsi_host_template to 32 to increase ↵Chad Dupuis
performance. Increase the default number of commands that the driver tells the SCSI mid-layer it can do to increase the default performance of the driver. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Move some prints to a debug level so they do not print when no ↵Chad Dupuis
debugging is enabled. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Fixup unnecessary parantheses around test_bit operations.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Add non-offload receive filters.Chad Dupuis
Drop invalid or unexpected FCoE frames that come into the non-offload path since the FCoE firmware would not do the filtering for us. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Add bus_reset No-op.Chad Dupuis
We need to add a bus reset no-op as without it some of the LUNs attached to a vport may go offline when the error handler escalates to host reset due to not having a bus reset handler in the driver. What happens is we escalate to host reset which does a soft link down/link up to reset the adapter. However with multiple vports attached it's been observed that if the vports do log back into the target within 5 seconds, the SCSI layer offlines the devices most likely due to a TUR timing out to verify that the device is online. Adding a bus reset handler will cause the TUR to be sent after the bus reset handler where the devices will still be online if the bus reset is initiated by sg_reset (which is the case in the test that was failing). The bus reset will succeed and not needlessly bring the device offline/online. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Use same logic for SCSI host reset and FC lip_reset.Chad Dupuis
We should be using the same logic to do a soft reset of the FCoE function whether it is initiated via sg_reset or the fc_host issue_lip attribute. Refactor the host reset and fcoe reset handlers to use the preferred logic which is currently contained in qedf_eh_host_reset(). Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Set qed logging level to QED_LEVEL_NOTICE.Chad Dupuis
Reduce the logging level we set for qed messages pertaining to this PCI function so that unnecessary messages are not printed in the kernel message log. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Add fka_period SCSI host attribute to show fip keep alive period.Chad Dupuis
Expose this information for interested applications. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Check that fcport is offloaded before dereferencing pointers in ↵Chad Dupuis
initiate_abts|cleanup. If an fcport is not offloaded then the members of the qedf_rport struct are undefined which may cause a system crash. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Look at all descriptors when processing a clear virtual link.Chad Dupuis
If there are multiple descriptors for a particular type in a clear virtual link we receive, we will not process it correctly but rather take the last value. This can cause us not to not flap the virtual link as the value from the descriptors that we compare against the our stored FCF or fc_lport values may not match. Change this to do a comparison when processing the each descriptor instead of at the end and then set a bool if we need to do the reset. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Honor qed_ops->common->set_fp_int() return code.Chad Dupuis
We need to check the return code the set_fp_int() callback in case we were not allocated any fastpath interrupts or there was an error setting up the fastpath interrupts from the qed perspective. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Update copyright to 2017.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qedf: Enable basic FDMI information.Chad Dupuis
For libfc to register FDMI attributes we need to do two things: - Set the appropriate fc_host attributes that libfc will use to form the FDMI registration commands - Set lport->fdmi_enabled to 1 Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-24qed: Replace set_id() api with set_name()Mintz, Yuval
Current API between qed and protocol modules allows passing an additional private string - but it doesn't get utilized by qed anywhere. Clarify the API by removing it and renaming it 'set_name'. CC: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08scsi: qedf: Avoid reading past end of bufferKees Cook
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: qedf: Cleanup the type of io_log->opDan Carpenter
We store sc_cmd->cmnd[0] which is an unsigned char in io_log->op so this should also be unsigned char. The other thing is that this is displayed in the debugfs: seq_printf(s, "0x%02x:", io_log->op); Smatch complains that the formatting won't work for negative values so changing it to unsigned silences that warning as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: qedf: properly update arguments position in function callGustavo A. R. Silva
Properly update the position of the arguments in function call. Addresses-Coverity-ID: 1402010 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the usual amount of cosmetic and spelling stuff" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits) scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template" scsi: stex: make S6flag static scsi: mac_esp: fix to pass correct device identity to free_irq() scsi: aacraid: pci_alloc_consistent() failures on ARM64 scsi: ufs: make ufshcd_get_lists_status() register operation obvious scsi: ufs: use MASK_EE_STATUS scsi: mac_esp: Replace bogus memory barrier with spinlock scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static scsi: sd_zbc: Do not write lock zones for reset scsi: sd_zbc: Remove superfluous assignments scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd scsi: Improve scsi_get_sense_info_fld scsi: sd: Cleanup sd_done sense data handling scsi: sd: Improve sd_completed_bytes scsi: sd: Fix function descriptions scsi: mpt3sas: remove redundant wmb scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host() scsi: sg: reset 'res_in_use' after unlinking reserved array scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency" ...
2017-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
A function in kernel/bpf/syscall.c which got a bug fix in 'net' was moved to kernel/bpf/verifier.c in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19scsi: qedi: qedf: Use designated initializersKees Cook
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. For these cases, terminate the list with { }, which will be zero-filled, instead of undesignated NULLs. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-07scsi: qedf: Fix crash due to unsolicited FIP VLAN response.Chad Dupuis
We need to initialize qedf->fipvlan_compl in __qedf_probe so that if we receive an unsolicited FIP VLAN response, the system doesn't crash due to trying to complete an uninitialized completion. Also add a check to see if there are any waiters on the completion so we don't inadvertantly kick start the discovery process due to the unsolicited frame. Fixed the crash: <1>BUG: unable to handle kernel NULL pointer dereference at (null) <1>IP: [<ffffffff8105ed71>] __wake_up_common+0x31/0x90 <4>PGD 0 <4>Oops: 0000 [#1] SMP <4>last sysfs file: /sys/devices/system/cpu/online <4>CPU 7 <4>Modules linked in: autofs4 nfs lockd fscache auth_rpcgss nfs_acl sunrpc target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic fcoe 8021q garp stp llc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 vfat fat uinput ipmi_devintf microcode power_meter acpi_ipmi ipmi_si ipmi_msghandler iTCO_wdt iTCO_vendor_support dcdbas sg joydev sb_edac edac_core lpc_ich mfd_core shpchp tg3 ptp pps_core ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif qedi(U) iscsi_boot_sysfs libiscsi scsi_transport_iscsi uio qedf(U) libfcoe libfc scsi_transport_fc scsi_tgt qede(U) qed(U) ahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: speedstep_lib] <4> <4>Pid: 1485, comm: qedf_11_ll2 Not tainted 2.6.32-642.el6.x86_64 #1 Dell Inc. PowerEdge R730/0599V5 <4>RIP: 0010:[<ffffffff8105ed71>] [<ffffffff8105ed71>] __wake_up_common+0x31/0x90 <4>RSP: 0018:ffff881068a83d50 EFLAGS: 00010086 <4>RAX: ffffffffffffffe8 RBX: ffff88106bf42de0 RCX: 0000000000000000 <4>RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88106bf42de0 <4>RBP: ffff881068a83d90 R08: 0000000000000000 R09: 00000000fffffffe <4>R10: 0000000000000000 R11: 000000000000000b R12: 0000000000000286 <4>R13: ffff88106bf42de8 R14: 0000000000000000 R15: 0000000000000000 <4>FS: 0000000000000000(0000) GS:ffff88089c460000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 0000000000000000 CR3: 0000000001a8d000 CR4: 00000000001407e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process qedf_11_ll2 (pid: 1485, threadinfo ffff881068a80000, task ffff881068a70040) <4>Stack: <4> ffff88106ef00090 0000000300000001 ffff881068a83d90 ffff88106bf42de0 <4><d> 0000000000000286 ffff88106bf42dd8 ffff88106bf40a50 0000000000000002 <4><d> ffff881068a83dc0 ffffffff810634c7 ffff881000000003 000000000000000b <4>Call Trace: <4> [<ffffffff810634c7>] complete+0x47/0x60 <4> [<ffffffffa01d37e7>] qedf_fip_recv+0x1c7/0x450 [qedf] <4> [<ffffffffa01cb3cb>] qedf_ll2_recv_thread+0x33b/0x510 [qedf] <4> [<ffffffffa01cb090>] ? qedf_ll2_recv_thread+0x0/0x510 [qedf] <4> [<ffffffff810a662e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6590>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: 41 56 41 55 41 54 53 48 83 ec 18 0f 1f 44 00 00 89 75 cc 89 55 c8 4c 8d 6f 08 48 8b 57 08 41 89 cf 4d 89 c6 48 8d 42 e8 49 39 d5 <48> 8b 58 18 74 3f 48 83 eb 18 eb 0a 0f 1f 00 48 89 d8 48 8d 5a <1>RIP [<ffffffff8105ed71>] __wake_up_common+0x31/0x90 <4> RSP <ffff881068a83d50> <4>CR2: 0000000000000000 Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-23qedf: fix wrong le16 conversionArnd Bergmann
gcc points out that we are converting a 16-bit integer into a 32-bit little-endian type and assigning that to 16-bit little-endian will end up with a zero: drivers/scsi/qedf/drv_fcoe_fw_funcs.c: In function 'init_initiator_rw_fcoe_task': include/uapi/linux/byteorder/big_endian.h:32:26: error: large integer implicitly truncated to unsigned type [-Werror=overflow] t_st_ctx->read_write.rx_id = cpu_to_le32(FCOE_RX_ID); The correct solution appears to be to just use a 16-bit byte swap instead. Fixes: be086e7c53f1 ("qed*: Utilize Firmware 8.15.3.0") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/genet/bcmgenet.c net/core/sock.c Conflicts were overlapping changes in bcmgenet and the lockdep handling of sockets. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13qed*: Utilize Firmware 8.15.3.0Mintz, Yuval
This patch advances the qed* drivers into using the newer firmware - This solves several firmware bugs, mostly related [but not limited to] various init/deinit issues in various offloaded protocols. It also introduces a major 4-Cached SGE change in firmware, which can be seen in the storage drivers' changes. In addition, this firmware is required for supporting the new QL41xxx series of adapters; While this patch doesn't add the actual support, the firmware contains the necessary initialization & firmware logic to operate such adapters [actual support would be added later on]. Changes from Previous versions: ------------------------------- - V2 - fix kbuild-test robot warnings Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06scsi: qedf: Use vsprintf extension %padJoe Perches
Using %llx for a dma_addr_t can lead to format/argument mismatches. Use %pad and the address of the dma_addr_t instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: qedf: Fix defective logging format and argument mismatchesJoe Perches
Add __printf compiler verification of format and arguments. Fix fallout. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-23scsi: qedf: fixup compilation warning about atomic_t usageDupuis, Chad
Based on an original patch by Hannes Reinecke. The driver didn't follow the atomic_t vs refcount_t change, and anyway one should be using kref_read() instead of accessing the counter inside an kref. Fixes: 61d8658b4a435e ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.) Cc: Hannes Reinecke <hare@suse.de> Cc: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Dupuis, Chad <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.Dupuis, Chad
The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedf - PCI driver registration - libfc/fcoe host level initialization - SCSI host template initialization and callbacks - Debugfs and log level infrastructure - Link handling - Firmware interface structures - QED core module initialization - Light L2 interface callbacks - I/O request initialization - Firmware I/O completion handling - Firmware ELS request/response handling - FIP request/response handled by the driver itself Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>