summaryrefslogtreecommitdiff
path: root/drivers/scsi/qedi/qedi_main.c
AgeCommit message (Collapse)Author
2023-08-07scsi: qedi: Fix firmware halt over suspend and resumeNilesh Javali
While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However the hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230807093725.46829-2-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-07scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lockChengfeng Ye
As &qedi_percpu->p_work_lock is acquired by hard IRQ qedi_msix_handler(), other acquisitions of the same lock under process context should disable IRQ, otherwise deadlock could happen if the IRQ preempts the execution while the lock is held in process context on the same CPU. qedi_cpu_offline() is one such function which acquires the lock in process context. [Deadlock Scenario] qedi_cpu_offline() ->spin_lock(&p->p_work_lock) <irq> ->qedi_msix_handler() ->edi_process_completions() ->spin_lock_irqsave(&p->p_work_lock, flags); (deadlock here) This flaw was found by an experimental static analysis tool I am developing for IRQ-related deadlocks. The tentative patch fix the potential deadlock by spin_lock_irqsave() under process context. Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Link: https://lore.kernel.org/r/20230726125655.4197-1-dg573847474@gmail.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-26scsi: qedi: Replace all non-returning strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230517143509.1520387-1-azeemshaikh38@gmail.com
2023-04-24scsi: qedi: Fix use after free bug in qedi_remove()Zheng Wang
In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-21scsi: iscsi: Fix session removal on shutdownMike Christie
When the system is shutting down, iscsid is not running so we will not get a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown will then hang waiting on userspace to remove the session. This has libiscsi force the destruction of the session from the kernel when iscsi_host_remove() is called from a driver's shutdown callout. This fixes a regression added in qedi boot with commit d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") which made qedi use the common session removal function that waits on userspace instead of rolling its own kernel based removal. Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com Fixes: d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") Tested-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21scsi: qedi: Use QEDI_MODE_NORMAL for error handlingMike Christie
When handling errors that lead to host removal use QEDI_MODE_NORMAL. There is currently no difference in behavior between NORMAL and SHUTDOWN, but in a subsequent commit we will want to know when we are called from the pci_driver shutdown callout vs remove/err_handler so we know when userspace is up. Link: https://lore.kernel.org/r/20220616222738.5722-6-michael.christie@oracle.com Tested-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: qedi: Remove redundant flush_workqueue() callsMinghao Chi (CGEL ZTE)
destroy_workqueue() already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant flush_workqueue() calls. Link: https://lore.kernel.org/r/20220127013934.1184923-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: qedi: Fix SYSFS_FLAG_FW_SEL_BOOT formattingFlorian Fainelli
The format used for formatting SYSFS_FLAG_FW_SEL_BOOT creates the following warning: drivers/scsi/qedi/qedi_main.c:2259:35: warning: format specifies type 'char' but the argument has type 'int' [-Wformat] rc = snprintf(buf, 3, "%hhd\n", SYSFS_FLAG_FW_SEL_BOOT); Fix this to cast the constant as a char since the intention is to print it via sysfs as a byte. Link: https://lore.kernel.org/r/20211130203813.12138-2-f.fainelli@gmail.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-29scsi: qedi: Remove set but unused 'page' variableFlorian Fainelli
The variable 'page' is set but never used throughout qedi_alloc_bdq(). Therefore remove it. Link: https://lore.kernel.org/r/20211126201708.27140-2-f.fainelli@gmail.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04qed: Update the TCP active termination 2 MSL timer ("TIME_WAIT")Prabhakar Kushwaha
Initialize 2 MSL timeout value used for the TCP TIME_WAIT state to non-zero default. This patch also removes magic number from qedi/qedi_main.c. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update TCP silly-window-syndrome timeout for iwarp, scsiNikolay Assa
Update TCP silly-window-syndrome timeout, for the cases where initiator's small TCP window size prevents FW from transmitting packets on the connection. Timeout causes FW to retransmit window probes if needed, preventing I/O stall if initiator ignores first window probe. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Remove e4_ and _e4 from FW HSIShai Malin
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16scsi: qedi: Fix error codes in qedi_alloc_global_queues()Dan Carpenter
This function had some left over code that returned 1 on error instead negative error codes. Convert everything to use negative error codes. The caller treats all non-zero returns the same so this does not affect run time. A couple places set "rc" instead of "status" so those error paths ended up returning success by mistake. Get rid of the "rc" variable and use "status" everywhere. Remove the bogus "status = 0" initialization, as a future proofing measure so the compiler will warn about uninitialized error codes. Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-09scsi: qedi: Fix host removal with running sessionsMike Christie
qedi_clear_session_ctx() could race with the in-kernel or userspace driven recovery/removal and we could access a NULL conn or do a double free. We should be using iscsi_host_remove() to start the removal process from the driver. It will start the in-kernel recovery and notify userspace that the driver's scsi_hosts are being removed. iscsid will then drive the session removal like is done when the logout command is run. When the sessions are removed, iscsi_host_remove() will return so qedi can finish knowing there are no running sessions and no new sessions will be allowed. This also fixes an issue where we check for a NULL conn after already accessing it introduced in commit 27e986289e73 ("scsi: iscsi: Drop suspend calls from ep_disconnect") by just removing the function completely. Link: https://lore.kernel.org/r/20210609192709.5094-1-michael.christie@oracle.com Fixes: 27e986289e73 ("scsi: iscsi: Drop suspend calls from ep_disconnect") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Fix shost->max_id useMike Christie
The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for. Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for some UFS changes that would otherwise cause conflicts during the merge. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qedi: Remove redundant assignment to variable errColin Ian King
Variable err is assigned -ENOMEM followed by an error return path via label err_udev that does not access the variable and returns with the -ENOMEM error return code. The assignment to err is redundant and can be removed. Link: https://lore.kernel.org/r/20210327230650.25803-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: qedi: Fix error return code of qedi_alloc_global_queues()Jia-Ju Bai
When kzalloc() returns NULL to qedi->global_queues[i], no error return code of qedi_alloc_global_queues() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-05scsi: qedi: Correct max length of CHAP secretNilesh Javali
The CHAP secret displayed garbage characters causing iSCSI login authentication failure. Correct the CHAP password max length. Link: https://lore.kernel.org/r/20201217105144.8055-1-njavali@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-07scsi: qedi: Fix missing destroy_workqueue() on error in __qedi_probeQinglang Miao
Add the missing destroy_workqueue() before return from __qedi_probe in the error handling case when fails to create workqueue qedi->offload_thread. Link: https://lore.kernel.org/r/20201109091518.55941-1-miaoqinglang@huawei.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-02scsi: qedi: Add schedule_hw_err_handler callback for fan failureManish Rangankar
On fan failure event from MFW, bring down active connections and unload the firmware context. Link: https://lore.kernel.org/r/20200924070338.8270-1-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedi: Add support for handling PCIe errorsManish Rangankar
The error recovery is handled by management firmware (MFW) with the help of qed/qedi drivers. Upon detecting errors, driver informs MFW about this event which in turn starts a recovery process. MFW sends ERROR_RECOVERY notification to the driver which performs the required cleanup/recovery from the driver side. Link: https://lore.kernel.org/r/20200908095657.26821-9-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedi: Add firmware error recovery invocation supportManish Rangankar
Add support to initiate MFW process recovery for all the devices if storage function receives the event first. Also added fix for kernel test robot warning, >> drivers/scsi/qedi/qedi_main.c:1119:6: warning: no previous prototype >> for 'qedi_schedule_hw_err_handler' [-Wmissing-prototypes] Link: https://lore.kernel.org/r/20200908095657.26821-8-mrangankar@marvell.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedi: Mark all connections for recovery on link down eventNilesh Javali
For short time cable pulls, the in-flight I/O to the firmware is never cleaned up, resulting in the behaviour of stale I/O completion causing list_del corruption and soft lockup of the system. On link down event, mark all the connections for recovery, causing cleanup of all the in-flight I/O immediately. Link: https://lore.kernel.org/r/20200908095657.26821-7-mrangankar@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedi: Use snprintf instead of sprintfManish Rangankar
Use snprintf to limit max number of bytes to the buffer. Link: https://lore.kernel.org/r/20200908095657.26821-6-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedi: Use qed count from set_fp_int in msix allocationManish Rangankar
To avoid unnecessary vector allocation when the number of fast-path queues is less then available msix vectors, use return count from module qed->set_fp_int. Link: https://lore.kernel.org/r/20200908095657.26821-2-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: qedi: Remove redundant NULL checkXu Wang
kfree_skb() handles a NULL skb argument so the additional check is unnecessary. Remove it. Link: https://lore.kernel.org/r/20200827092606.32148-1-vulab@iscas.ac.cn Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qedi: Demote seemingly unintentional kerneldoc headerLee Jones
This is the only use of kerneldoc in the source file and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedi/qedi_main.c:1969: warning: Function parameter or member 'qedi' not described in 'qedi_get_nvram_block' Link: https://lore.kernel.org/r/20200723122446.1329773-37-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qedi: Remove 2 set but unused variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qedi/qedi_main.c: In function ‘qedi_queue_cqe’: drivers/scsi/qedi/qedi_main.c:1158:21: warning: variable ‘conn’ set but not used [-Wunused-but-set-variable] 1158 | struct iscsi_conn *conn; | ^~~~ drivers/scsi/qedi/qedi_main.c: In function ‘__qedi_probe’: drivers/scsi/qedi/qedi_main.c:2432:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] 2432 | u16 tmp; | ^~~ Link: https://lore.kernel.org/r/20200723122446.1329773-12-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: qedi: Remove unused variable udev & uctrlXie XiuQi
uctrl and udev are unused after commit 9632a6b4b747 ("scsi: qedi: Move LL2 producer index processing in BH.") Remove them. Link: https://lore.kernel.org/r/20200505121904.25702-1-xiexiuqi@huawei.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: qedi: Remove comparison of 0/1 to bool variableJason Yan
Fix the following coccicheck warning: drivers/scsi/qedi/qedi_main.c:1309:5-25: WARNING: Comparison of 0/1 to bool variable drivers/scsi/qedi/qedi_main.c:1315:5-25: WARNING: Comparison of 0/1 to bool variable Link: https://lore.kernel.org/r/20200430121706.14879-1-yanaijie@huawei.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedi: make qedi_ll2_buf_size staticJason Yan
Fix the following sparse warning: drivers/scsi/qedi/qedi_main.c:44:6: warning: symbol 'qedi_ll2_buf_size' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085029.7170-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Add modules param to enable qed iSCSI debugManish Rangankar
Add module parameter to enable debug messages specific to iSCSI functions. Link: https://lore.kernel.org/r/20200408064332.19377-6-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Use correct msix count for fastpath vectorsManish Rangankar
Use MSI-X count provided by qed. Link: https://lore.kernel.org/r/20200408064332.19377-4-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Remove additional char from boot target iqnnameManish Rangankar
While parsing the iSCSI TLV data to MFW request, a newline was added to the firmware boot target iqnname string. Because of this, we were getting the following error even after the boot target was successfully logged in: "[qedi_get_protocol_tlv_data:1197]:1: Boot target not set" Remove the trailing newline. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-2-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: qedi: Add PCI shutdown handler supportManish Rangankar
Add PCI shutdown handler support for supporting wake-on-lan feature. Link: https://lore.kernel.org/r/20200319083811.19499-3-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: qedi: Add MFW error recovery processManish Rangankar
This patch adds the mfw error recovery process in the qedi driver. The process includes a partial/customized driver unload and load to reset context by preserving active iSCSI session kernel state. Link: https://lore.kernel.org/r/20200319083811.19499-2-mrangankar@marvell.com Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three driver fixes (and one version number update): a suspend hang in ufs, a qla hard lock on module removal and a qedi panic during discovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix hardlockup in abort command during driver remove scsi: ufs: Avoid runtime suspend possibly being blocked forever scsi: qedi: update driver version to 8.37.0.20 scsi: qedi: Check targetname while finding boot target information
2019-06-18scsi: qedi: Check targetname while finding boot target informationNilesh Javali
The kernel panic was observed during iSCSI discovery via offload with below call trace, [ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.646927] PGD 0 [ 2115.646932] Oops: 0000 [#1] SMP [ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 [ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed] [ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000 [ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>] [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.647141] RSP: 0018:ffff8d66afb83c68 EFLAGS: 00010206 [ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a [ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040 [ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff [ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0 [ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8 [ 2115.647149] FS: 0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000 [ 2115.647151] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0 [ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2115.647155] PKRU: 00000000 [ 2115.647157] Call Trace: [ 2115.647165] [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi] [ 2115.647184] [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed] [ 2115.647195] [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed] [ 2115.647206] [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed] [ 2115.647215] [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660 [ 2115.647221] [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580 [ 2115.647230] [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed] [ 2115.647278] RIP [<ffffffffacf7f0cc>] strncmp+0xc/0x60 Fix kernel panic by validating the session targetname before providing TLV data and confirming the presence of boot targets. Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440Thomas Gleixner
Based on 1 normalized pattern(s): this software is available under the terms of the gnu general public license gpl version 2 available from the file copying in the main directory of this source tree extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.411886531@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-26qedi: Use hwfns and affin_hwfn_idx to get MSI-X vector indexManish Rangankar
MSI-X vector index is determined using qed device information and affinity to use. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-26Revert "scsi: qedi: Allocate IRQs based on msix_cnt"Manish Rangankar
Always request for number of irqs equals to number of queues. This reverts commit 1a291bce5eaf5374627d337157544aa6499ce34a. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29scsi: qedi: remove declaration of nvm_image from stackColin Ian King
The nvm_image is a large struct qedi_nvm_iscsi_image object of over 24K so don't declare it on the stack just for a sizeof requirement; use sizeof on struct qedi_nvm_iscsi_image instead. Fixes: c77a2fa3ff8f ("scsi: qedi: Add the CRC size within iSCSI NVM image") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-11-28scsi: qedi: Move LL2 producer index processing in BH.Manish Rangankar
1. Removed logic to update HW producer index in interrupt context. 2. Update HW producer index after UIO ring and buffer gets initialized. Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2024-05-12 12:39:48 +0000