summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_dbg.c
AgeCommit message (Collapse)Author
2019-08-12scsi: qla2xxx: Declare the fourth ql_dump_buffer() argument constBart Van Assche
This patch makes it clear to humans and also to the compiler that ql_dump_buffer() does not modify the memory the @buf argument points at. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Insert spaces where requiredBart Van Assche
Improve source code readability by inserting spaces where these are required according to the coding standard. This patch only inserts whitespace and does not make any other changes. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Cleanups for NVRAM/Flash read/write pathJoe Carnuccio
This patch does following: - Clean up NVRAM code. - Optimizes reading of primary/secondary flash image validation. - Remove 0xff mask and make correct width in FLT structure. - Use endian macros to assign static fields in fwdump header. - Correct fdwt checksum calculation. - Simplify ql_dump_buffer() interface usage. - Add endianizers to 27xx firmware image validator. - fixes compiler warnings for big endian architecture. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Add Device ID for ISP28XXJoe Carnuccio
This patch adds PCI device ID ISP28XX for Gen7 support. Also signature determination for primary/secondary flash image for ISP27XX/28XX is aded as part of Gen7 support. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Fix routine qla27xx_dump_{mpi|ram}()Joe Carnuccio
This patch fixes qla27xx_dump_{mpi|ram} api for ISP27XX. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Add longer window for chip resetQuinn Tran
qla2x00_reset_active only covers the window of turning the chip off. Add check to cover turning chip on. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-03Merge branch 'fixes' into miscJames Bottomley
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc scsi: qla2xxx: Fix FC-NVMe LUN discovery" Merge is non-trivial and has been verified by Qlogic (Cavium) Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
2018-03-21scsi: qla2xxx: fix error message on <qla2400Meelis Roos
This patch fixes IO traps caught by hardware when mailbox command fails on qla2200. The error handler assumes newer firmware that is available on 2400 and newer HBA-s. This causes ugly crashes on sparc64. Fix it with separate debug prints on different firmware generations like most other places do. [mkp: updated based on feedback from Himanshu] Signed-off-by: Meelis Roos <mroos@linux.ee> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSYDarren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-12scsi: qla2xxx: Fix function argument descriptionsBart Van Assche
Bring the kernel-doc headers in sync with the function argument lists. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qla2xxx: Remove potential macro parameter side-effect in ql_dump_regs()Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qla2xxx: Move logging default mask to execute once only.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24scsi: qla2xxx: Fix NPIV host enable after chip resetQuinn Tran
For NPIV ports, call configure_hba() so that NPIV ports can proceed to loop initialization. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07scsi: qla2xxx: Added change to enable ZIO for FC-NVMe devicesDuane Grigsby
Add support to the driver to set the exchange threshold value for the number of outstanding AENs. Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registrationDuane Grigsby
This code provides the interfaces to register remote and local ports of FC4 type 0x28 with the FC-NVMe transport and transports the requests (FC-NVMe FC link services and FC-NVMe commands IUs) to the fabric. It also provides the support for allocating h/w queues and aborting FC-NVMe FC requests. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27scsi: qla2xxx: Add FC-NVMe port discovery and PRLI handlingDuane Grigsby
Added logic to change the login process into an optional PRIL step for FC-NVMe ports as a separate operation, such that we can change type to 0x28 (NVMe). Currently, the driver performs the PLOGI/PRLI together as one operation, but if the discovered port is an NVMe port then we first issue the PLOGI and then we issue the PRLI. Also, the fabric discovery logic was changed to mark each discovered FC NVMe port, so that we can register them with the FC-NVMe transport later. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27scsi: qla2xxx: Include Exchange offload/Extended Login into FW dumpQuinn Tran
Add missing memory dump of Exchange Offload and Extended login into FW dump. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27scsi: qla2xxx: Add debug logging routine for qpairQuinn Tran
For target main path io routines that uses qpair, create new logging & debugging routines to use qpair instead of reaching for scsi_qla_host to reduce cache thrash. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: qla2xxx: Cleanup debug message IDsQuinn Tran
Assign unique id to all traces and logs for debug purpose. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-24scsi: qla2xxx: Fix mailbox pointer error in fwdump captureJoe Carnuccio
Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: qla2xxx: Fix ql_dump_bufferJoe Perches
Recent printk changes for KERN_CONT cause this logging to be defectively emitted on multiple lines. Fix it. Also reduces object size a trivial amount. $ size drivers/scsi/qla2xxx/qla_dbg.o* text data bss dec hex filename 39125 0 0 39125 98d5 drivers/scsi/qla2xxx/qla_dbg.o.new 39164 0 0 39164 98fc drivers/scsi/qla2xxx/qla_dbg.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Add multiple queue pair functionality.Michael Hernandez
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Fix duplicate message id.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Disable the adapter and skip error recovery in case of register ↵Sawan Chandak
disconnect. If there is error recovery going on due to command timeout and there is register disconnect, then disable the adapter. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Correction to function qla26xx_dport_diagnostics().Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add support to handle Loop Init error Asynchronus event.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Let DPORT be enabled purely by nvram.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add bsg interface to support D_Port Diagnostics.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Check for device state before unloading the driver.Sawan Chandak
During hot swap of PCI device, there can be PCI error on device, during normal driver unload. The race between normal driver unload and driver unload due to PCI error, can lead to system crash.Fix is to check if there is unload going on and allow that function to unload the driver. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Properly reset firmware statistics.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Make debug buffer log easier to view.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.Giridhar Malavali
When VP decoupling enabled, there could be a window where, FLOGI from initiators can be dropped before VP0 is enabled, causing link level recovery. Retry FLOGI to avoid link level recovery. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Shutdown board on thermal shutdown aen.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Remove sysfs node fw_dump_template.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23qla2xxx: Avoid side effects when using endianizer macros.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23qla2xxx: Add support for Private link statistics counters.Harish Zunjarrao
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23qla2xxx: Add support for online flash update for ISP27XX.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23qla2xxx: Remove unneeded link offline message.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-07qla2xxx: Wait for all conflicts before ack'ing PLOGIAlexei Potashnik
Until now ack'ing of a new PLOGI has only been delayed if there was an existing session for the same WWN. Ack was released when the session deletion completed. If there was another WWN session with the same fc_id/loop_id pair (aka "conflicting session"), PLOGI was still ack'ed immediately. This potentially caused a problem when old session deletion logged fc_id/loop_id out of FW after new session has been established. Two work-arounds were attempted before: 1. Dropping PLOGIs until conflicting session goes away. 2. Detecting initiator being logged out of FW and issuing LOGO to force re-login. This patch introduces proper solution to the problem where PLOGI is held until either existing session with same WWN or any conflicting session goes away. Mechanism supports one session holding two PLOGI acks as well as one PLOGI ack being held by many sessions. Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Added interface to send explicit LOGO.Himanshu Madhani
This patch adds interface to send explicit LOGO explicit LOGO using using ELS commands from driver. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Enable Target counters in DebugFS.Himanshu Madhani
Following counters are added in target mode to help debugging efforts. Target Counters qla_core_sbt_cmd = 0 qla_core_ret_sta_ctio = 0 qla_core_ret_ctio = 0 core_qla_que_buf = 0 core_qla_snd_status = 0 core_qla_free_cmd = 0 num alloc iocb failed = 0 num term exchange sent = 0 num Q full sent = 0 Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Enable Exchange offload support.Himanshu Madhani
This patch enables Exchange offload support in Qlogic ISP. To enable exchange offload with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexchoffld to any non-zero number. This will alow ISP firmware to store exchange data structures used by firmware to host memory provided by driver. ISP firmware can supports upto 32k total active exchanges. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Enable Extended Logins supportHimanshu Madhani
This patch enables Extended Logins support in Qlogic ISP. To enable extended login with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexlogins to any non-zero number. This will alow ISP firmware to store port database structure information of remote login sessions to host memory provided by driver. ISP firmware supports upto 16k total logins. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This includes one new driver: cxlflash plus the usual grab bag of updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop, plus a few assorted fixes. There's another tranch coming, but I want to incubate it another few days in the checkers, plus it includes a mpt2sas separated lifetime fix, which Avago won't get done testing until Friday" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits) aic94xx: set an error code on failure storvsc: Set the error code correctly in failure conditions storvsc: Allow write_same when host is windows 10 storvsc: use storage protocol version to determine storage capabilities storvsc: use correct defaults for values determined by protocol negotiation storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation. storvsc: Use a single value to track protocol versions storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges. cxlflash: Remove unused variable from queuecommand cxlflash: shift wrapping bug in afu_link_reset() cxlflash: off by one bug in cxlflash_show_port_status() cxlflash: Virtual LUN support cxlflash: Superpipe support cxlflash: Base error recovery support qla2xxx: Update driver version to 8.07.00.26-k qla2xxx: Add pci device id 0x2261. qla2xxx: Fix missing device login retries. qla2xxx: do not clear slot in outstanding cmd array qla2xxx: Remove decrement of sp reference count in abort handler. qla2xxx: Add support to show MPI and PEP FW version for ISP27xx. ...
2015-08-26qla2xxx: Do not reset adapter if SRB handle is in range.Chad Dupuis
If an SRB is NULL but the handle is in range just drop the command instead of also resetting the adapter. If the handle is in range then the command was valid at some point and may have been aborted. Resetting the adapter can lead to extended recovery times in this case. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Handle AEN8014 incoming port logout.Joe Carnuccio
When we get logged out, mark the port lost and set dpc flag for relogin. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Avoid that sparse complains about context imbalancesBart Van Assche
Surround conditional locking statements with "#ifndef __CHECKER__" / "#endif" to hide these for the sparse static source code analysis tool. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Avoid that sparse complains about duplicate [noderef] attributesBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove __constant_ prefixBart Van Assche
Whether htonl() or __constant_htonl() is used, if the argument is a constant the conversion happens at compile time. Hence leave out the __constant_ prefix for this and other endianness conversion functions. This improves source code readability. [jejb: checkpatch fixes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove set-but-not-used variablesBart Van Assche
Detected these variables by building with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
generated by cgit (git 2.34.1) at 2024-06-25 13:11:09 +0000