summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2019-04-29scsi: qla2xxx: Make qla24xx_async_abort_cmd() staticBart Van Assche
Since qla24xx_async_abort_cmd() is only called from inside qla_init.c, declare that function static. Reorder a few functions to avoid that any forward declarations are needed. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Remove unnecessary locking from the target codeBart Van Assche
All callbacks from the target core into the qla2xxx driver and also all I/O completion functions are serialized per command. Since .cmd_sent_to_fw and .trc_flags are only modified from inside these functions it is not necessary to protect it with locking. Remove the superfluous locking. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Remove qla_tgt_cmd.releasedBart Van Assche
Since the previous patch removed the only statement that sets qla_tgt_cmd.released, remove the code that depends on that member variable being set and the member variable itself. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Complain if a command is released that is owned by the firmwareBart Van Assche
The previous patch guarantees that a command is only released after the firmware has finished processing it. Hence complain if a command is released that is owned by the firmware. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: target: Fix offline port handling and host reset handlingBart Van Assche
Remove the function qlt_abort_cmd_on_host_reset() because it can do the following, all of which can cause a kernel crash: - DMA unmapping while DMA is in progress. - Call target_execute_cmd() while DMA is in progress. - Call transport_generic_free_cmd() while the LIO core owns a command. Instead of trying to abort a command asynchronously, set the 'aborted' flag and handle the abort after the hardware has passed control back to the tcm_qla2xxx driver. Cc: Arun Easi <arun.easi@qlogic.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: c0cb44967b4a ("qla2xxx: Add Host reset handling in target mode.") # v3.18. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()Bart Van Assche
Implementations of the .write_pending() callback functions must guarantee that an appropriate LIO core callback function will be called immediately or at a later time. Make sure that this guarantee is met for aborted SCSI commands. [mkp: typo] Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 694833ee00c4 ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e00ac4 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()Bart Van Assche
The test "if (!cmd)" is not useful because it is guaranteed that cmd != NULL. Instead of testing the cmd pointer, rely on the tag to decide whether or not command allocation failed. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 33e799775593 ("qla2xxx: Add support for QFull throttling and Term Exchange retry") # v3.18. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Simplify qlt_send_term_imm_notif()Bart Van Assche
All qlt_send_term_imm_notif() callers pass '1' as second argument to this function. Hence remove the (broken) code that depends on that second argument having another value. Add a pr_debug() statement that prints rc to avoid that the compiler would complain that rc has been set but is not used. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma()Bart Van Assche
The current order for freeing memory is as follows: - struct crc_context itself. - struct crc_context member pointers. Change the freeing order into the following: - struct crc_context member pointers. - struct crc_context itself. Detected by Coverity. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 50b812755e97 ("scsi: qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary") # v5.1-rc1. Fixes: d74595278f4a ("scsi: qla2xxx: Add multiple queue pair functionality.") # v4.10. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix a qla24xx_enable_msix() error pathBart Van Assche
Make sure that the allocated interrupts are freed if allocating memory for the msix_entries array fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Avoid that qla2x00_mem_free() crashes if called twiceBart Van Assche
Clear each pointer after having freed memory such that it becomes safe to call qla2x00_mem_free() twice. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Make qla2x00_mem_free() easier to verifyBart Van Assche
Instead of clearing all freed pointers at the end of qla2x00_mem_free(), clear freed pointers immediately after having freed the memory these pointers point at. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Increase the size of the mailbox arrays from 4 to 8Bart Van Assche
This patch avoids that Coverity complains that qla2x00_async_event() writes outside the bounds of the mb[] arrays (MBA_IDC_AEN case). Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Log the status code if a firmware command failsBart Van Assche
It is important to know why a firmware command failed. Hence log 'rval' together with the values of the mailbox registers if a firwmare command fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Avoid that Coverity complains about dereferencing a NULL ↵Bart Van Assche
rport pointer Since Coverity cannot know that rport != NULL in qla2xxx_queuecommand() and since there is code in that function that dereferences the rport pointer, modify qla2xxx_queuecommand() such that it fails SCSI commands if rport == NULL. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Remove the fcport test from qla_nvme_abort_work()Bart Van Assche
Testing whether a pointer is not NULL after it has been dereferenced is not useful. Hence remove the if (fcport) test. This was detected by Coverity. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Uninline qla2x00_init_timer()Bart Van Assche
Since qla2x00_init_timer() is not used for I/O commands there is no need to inline this function. Hence uninline this function. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_is_reserved_id() from qla_inline.h into qla_init.cBart Van Assche
The previous patch moved all qla2x00_is_reserved_id() callers into qla_init.c. Hence also move the qla2x00_is_reserved_id() definition into qla_init.c. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_clear_loop_id() from qla_inline.h into qla_init.cBart Van Assche
Since qla2x00_clear_loop_id() is not in the hot path, uninline it. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Remove a set-but-not-used variableBart Van Assche
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Declare qla2x00_find_new_loop_id() staticBart Van Assche
Since all qla2x00_find_new_loop_id() calls occur in the same source file as the definition of this function, move that function to just before its first caller and declare it static. Convert the header above this function into kernel-doc format. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_set_reserved_loop_ids() definitionBart Van Assche
Since qla2x00_set_reserved_loop_ids() only has a single caller, move it into the source file from where it is called. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix a format specifierBart Van Assche
Since mcmd->sess->port_name is eight bytes long, use %8phC to format that port name instead of %phC. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") # v4.11. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Update two source code commentsBart Van Assche
Change one occurrence of "*(" into "()" and change one occurrence of "lcoate" into "locate". Fix the reference to qla_tgt_handle_cmd_for_atio(): there has never been a function with that name. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 75f8c1f693ee ("[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core") # v3.5. Fixes: 2d70c103fd2a ("[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series") # v3.5. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Silence Successful ELS IOCB messageHimanshu Madhani
ELS IOCB done message should be moved to verbose logging to prevent confusion about the error case v/s successful submission case. [mkp: typos] Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix device staying in blocked stateQuinn Tran
This patch fixes issue reported by some of the customers, who discovered that after cable pull scenario the devices disappear and path seems to remain in blocked state. Once the device reappears, driver does not seem to update path to online. This issue appears because of the defer flag creating race condition where the same session reappears. This patch fixes this issue by indicating SCSI-ML of device lost when qlt_free_session_done() is called from qlt_unreg_sess(). Fixes: 41dc529a4602a ("qla2xxx: Improve RSCN handling in driver") Signed-off-by: Quinn Tran <qtran@marvell.com> Cc: stable@vger.kernel.org #4.19 Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Fix read offset in qla24xx_load_risc_flash()Himanshu Madhani
This patch fixes regression introduced by commit f8f97b0c5b7f ("scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path") where flash read/write routine cleanup left out code which resulted into checksum failure leading to use-after-free stack during driver load. Following stack trace is seen in the log file qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.01.00.16-k. qla2xxx [0000:00:0b.0]-001d: : Found an ISP2532 irq 11 iobase 0x0000000000f47f03. qla2xxx [0000:00:0b.0]-00cd:8: ISP Firmware failed checksum. qla2xxx [0000:00:0b.0]-00cf:8: Setup chip ****FAILED****. qla2xxx [0000:00:0b.0]-00d6:8: Failed to initialize adapter - Adapter flags 2. ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xd0 Read of size 8 at addr ffff8880ca05a490 by task modprobe/857 CPU: 0 PID: 857 Comm: modprobe Not tainted 5.1.0-rc1-dbg+ #4 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x86/0xca print_address_description+0x6c/0x234 ? __list_del_entry_valid+0x15/0xd0 kasan_report.cold.3+0x1b/0x34 ? __list_del_entry_valid+0x15/0xd0 ? __kmem_cache_shutdown.cold.95+0xf5/0x176 ? __list_del_entry_valid+0x15/0xd0 __asan_load8+0x54/0x90 __list_del_entry_valid+0x15/0xd0 dma_pool_destroy+0x4f/0x260 ? dma_free_attrs+0xb4/0xd0 qla2x00_mem_free+0x529/0xcc0 [qla2xxx] ? kobject_put+0xdb/0x230 qla2x00_probe_one+0x2b5e/0x45f0 [qla2xxx] ? qla2xxx_pci_error_detected+0x210/0x210 [qla2xxx] ? match_held_lock+0x20/0x240 ? find_held_lock+0xca/0xf0 ? mark_held_locks+0x86/0xb0 ? _raw_spin_unlock_irqrestore+0x52/0x60 ? __pm_runtime_resume+0x5b/0xb0 ? lockdep_hardirqs_on+0x185/0x260 ? _raw_spin_unlock_irqrestore+0x52/0x60 ? trace_hardirqs_on+0x24/0x130 ? preempt_count_sub+0x13/0xc0 ? _raw_spin_unlock_irqrestore+0x3d/0x60 pci_device_probe+0x154/0x1e0 really_probe+0x17d/0x540 ? device_driver_attach+0x90/0x90 driver_probe_device+0x113/0x170 ? device_driver_attach+0x90/0x90 device_driver_attach+0x88/0x90 __driver_attach+0xb5/0x190 bus_for_each_dev+0xf8/0x160 ? subsys_dev_iter_exit+0x10/0x10 ? kasan_check_read+0x11/0x20 ? preempt_count_sub+0x13/0xc0 ? _raw_spin_unlock+0x2c/0x50 driver_attach+0x26/0x30 bus_add_driver+0x238/0x2f0 driver_register+0xd7/0x150 __pci_register_driver+0xd5/0xe0 ? 0xffffffffa06c8000 qla2x00_module_init+0x208/0x254 [qla2xxx] do_one_initcall+0xc0/0x3c9 ? trace_event_raw_event_initcall_finish+0x150/0x150 ? __kasan_kmalloc.constprop.5+0xc7/0xd0 ? kasan_unpoison_shadow+0x35/0x50 ? kasan_poison_shadow+0x2f/0x40 ? __asan_register_globals+0x5a/0x70 do_init_module+0x103/0x330 load_module+0x36df/0x3b70 ? fsnotify+0x611/0x640 ? module_frob_arch_sections+0x20/0x20 ? kernel_read+0x74/0xa0 ? kasan_check_write+0x14/0x20 ? kernel_read_file+0x25e/0x320 ? do_mmap+0x42c/0x6c0 __do_sys_finit_module+0x133/0x1c0 ? __do_sys_finit_module+0x133/0x1c0 ? __do_sys_init_module+0x210/0x210 ? fput_many+0x1b/0xc0 ? fput+0xe/0x10 ? do_syscall_64+0x14/0x210 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe __x64_sys_finit_module+0x3e/0x50 do_syscall_64+0x72/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f8bd5c03219 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 fc 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9d11de98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055ef21596b50 RCX: 00007f8bd5c03219 RDX: 0000000000000000 RSI: 000055ef21596570 RDI: 0000000000000004 RBP: 000055ef21596570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000 R13: 000055ef21596c80 R14: 0000000000040000 R15: 000055ef21596b50 Allocated by task 857: save_stack+0x43/0xd0 __kasan_kmalloc.constprop.5+0xc7/0xd0 kasan_kmalloc+0x9/0x10 kmem_cache_alloc_trace+0x144/0x300 dma_pool_create+0xb5/0x3b0 qla2x00_mem_alloc+0xb98/0x1ad0 [qla2xxx] qla2x00_probe_one+0xe28/0x45f0 [qla2xxx] pci_device_probe+0x154/0x1e0 really_probe+0x17d/0x540 driver_probe_device+0x113/0x170 device_driver_attach+0x88/0x90 __driver_attach+0xb5/0x190 bus_for_each_dev+0xf8/0x160 driver_attach+0x26/0x30 bus_add_driver+0x238/0x2f0 driver_register+0xd7/0x150 __pci_register_driver+0xd5/0xe0 qla2x00_module_init+0x208/0x254 [qla2xxx] do_one_initcall+0xc0/0x3c9 do_init_module+0x103/0x330 load_module+0x36df/0x3b70 __do_sys_finit_module+0x133/0x1c0 __x64_sys_finit_module+0x3e/0x50 do_syscall_64+0x72/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 857: save_stack+0x43/0xd0 __kasan_slab_free+0x139/0x190 kasan_slab_free+0xe/0x10 kfree+0xf0/0x2c0 dma_pool_destroy+0x24c/0x260 qla2x00_mem_free+0x529/0xcc0 [qla2xxx] qla2x00_free_device+0x167/0x1b0 [qla2xxx] qla2x00_probe_one+0x2b28/0x45f0 [qla2xxx] pci_device_probe+0x154/0x1e0 really_probe+0x17d/0x540 driver_probe_device+0x113/0x170 device_driver_attach+0x88/0x90 __driver_attach+0xb5/0x190 bus_for_each_dev+0xf8/0x160 driver_attach+0x26/0x30 bus_add_driver+0x238/0x2f0 driver_register+0xd7/0x150 __pci_register_driver+0xd5/0xe0 qla2x00_module_init+0x208/0x254 [qla2xxx] do_one_initcall+0xc0/0x3c9 do_init_module+0x103/0x330 load_module+0x36df/0x3b70 __do_sys_finit_module+0x133/0x1c0 __x64_sys_finit_module+0x3e/0x50 do_syscall_64+0x72/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880ca05a400 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 144 bytes inside of 192-byte region [ffff8880ca05a400, ffff8880ca05a4c0) The buggy address belongs to the page: page:ffffea0003281680 count:1 mapcount:0 mapping:ffff88811bf03380 index:0x0 compound_mapcount: 0 flags: 0x4000000000010200(slab|head) raw: 4000000000010200 0000000000000000 0000000c00000001 ffff88811bf03380 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880ca05a380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880ca05a400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880ca05a480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff8880ca05a500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880ca05a580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ================================================================== Fixes: f8f97b0c5b7f ("scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path") Reported-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Move qla2x00_set_fcport_state() from a .h into a .c fileBart Van Assche
The qla2x00_set_fcport_state() function is not in the hot path so move its definition from a .h into a .c file. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Remove two superfluous castsBart Van Assche
Casting a void pointer into another pointer before assigning the pointer to a variable is not useful. Hence remove such casts. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Remove qla_tgt_cmd.data_work and qla_tgt_cmd.data_work_freeBart Van Assche
The 'data_work' and 'data_work_free' member variables are set but never used. Hence remove both member variables. See also commit 6bcbb3174caa ("qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)"). Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Move the <linux/io-64-nonatomic-lo-hi.h> include directiveBart Van Assche
The <linux/io-64-nonatomic-lo-hi.h> header file is included because of the readq() macro. Since that macro is only used in qla_nx.c, move that include statement into qla_nx.c. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Declare qla24xx_build_scsi_crc_2_iocbs() staticBart Van Assche
Since qla24xx_build_scsi_crc_2_iocbs() is only used inside a single source file, declare this function static. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Move the port_state_str[] definition from a .h to a .c fileBart Van Assche
Reduce the size of the qla2xxx kernel module by moving an array definition from a .h into a .c file. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Insert spaces where requiredBart Van Assche
Improve source code readability by inserting spaces where these are required according to the coding standard. This patch only inserts whitespace and does not make any other changes. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Fix formatting of pointer typesBart Van Assche
Improve source code readability by following the Linux kernel coding style for pointer types. This patch only changes whitespace. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Leave a blank line after declarationsBart Van Assche
This patch improves readability of the qla2xxx source code. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Use tabs to indent codeBart Van Assche
Most but not all code in the qla2xxx driver uses tabs for indentation. Make the qla2xxx code easier to read by using tabs consistently for indentation. This patch improves conformance with the Linux kernel coding style. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12Merge branch '5.1/scsi-fixes' into 5.2/mergeMartin K. Petersen
We have a few submissions for 5.2 that depend on fixes merged post 5.1-rc1. Merge the fixes branch into queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12scsi: scsi_transport_fc: nvme: display FC-NVMe port rolesHannes Reinecke
Currently the FC-NVMe driver is leverating the SCSI FC transport class to access the remote ports. Which means that all FC-NVMe remote ports will be visible to the fc transport layer, but due to missing definitions the port roles will always be 'unknown'. This patch adds the missing definitions to the fc transport class to that the port roles are correctly displayed. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-09scsi: tcm_qla2xxx: Minimize #include directivesBart Van Assche
Only include those header files that are needed by the code in this source file. [mkp: include build fix from Bart for SPARC] Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Unregister resources in the opposite order of the ↵Bart Van Assche
registration order Make sure that resources are only unregistered after the users of these resources have been unregistered. Only unregister the character device if registration of it succeeded. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Unregister chrdev if module initialization failsBart Van Assche
If module initialization fails after the character device has been registered, unregister the character device. Additionally, avoid duplicating error path code. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Fixes: 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Use get/put_unaligned where appropriateBart Van Assche
This patch makes the code easier to read but does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Make qla2x00_process_response_queue() easier to readBart Van Assche
Make qla2x00_process_response_queue() easier to read by splitting this function. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Reduce the number of forward declarationsBart Van Assche
Move the SCSI host template definition after the definition of the functions that it references. Remove the forward declarations that became unnecessary by that change. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Declare local symbols staticBart Van Assche
This patch avoids that sparse complains that a declaration is missing. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Use ARRAY_SIZE() in the definition of QLA_LAST_SPEEDBart Van Assche
Make the code easier to read by avoiding to use a hard-coded constant. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Remove a comment that refers to the SCSI host lockBart Van Assche
Since qla2xxx_queuecommand() no longer takes the SCSI host lock, remove a comment that refers to the host lock. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: Change a stack variable into a static const variableBart Van Assche
Make qla2x00_get_host_fabric_name() slightly faster by changing a stack array into a static array. Declare that array const now that the wwn_to_u64() argument pointer has been declared const. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08scsi: qla2xxx: fix spelling mistake "alredy" -> "already"Colin Ian King
There is a spelling mistake in a ql_log message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-04-17 01:59:04 +0000