summaryrefslogtreecommitdiff
path: root/drivers/scsi/sd.c
AgeCommit message (Collapse)Author
2020-01-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series is slightly unusual because it includes Arnd's compat ioctl tree here: 1c46a2cf2dbd Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue Excluding Arnd's changes, this is mostly an update of the usual drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There are a couple of core and base updates around error propagation and atomicity in the attribute container base we use for the SCSI transport classes. The rest is minor changes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits) scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts scsi: ufs: Use UFS device indicated maximum LU number scsi: ufs: Add max_lu_supported in struct ufs_dev_info scsi: ufs: Delete is_init_prefetch from struct ufs_hba scsi: ufs: Inline two functions into their callers scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init() scsi: ufs: Split ufshcd_probe_hba() based on its called flow scsi: ufs: Delete struct ufs_dev_desc scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails scsi: ufs-mediatek: enable low-power mode for hibern8 state scsi: ufs: export some functions for vendor usage scsi: ufs-mediatek: add dbg_register_dump implementation scsi: qla2xxx: Fix a NULL pointer dereference in an error path scsi: qla1280: Make checking for 64bit support consistent scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1 ...
2020-01-26Merge tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Unfortunately this weekend we had a few last minute reports, one was for block. The partition disable for zoned devices was overly restrictive, it can work (and be supported) just fine for host-aware variants. Here's a fix ensuring that's the case so we don't break existing users of that" * tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block: block: allow partitions on host aware zone devices
2020-01-26block: allow partitions on host aware zone devicesChristoph Hellwig
Host-aware SMR drives can be used with the commands to explicitly manage zone state, but they can also be used as normal disks. In the former case it makes perfect sense to allow partitions on them, in the latter it does not, just like for host managed devices. Add a check to add_partition to allow partitions on host aware devices, but give up any zone management capabilities in that case, which also catches the previously missed case of adding a partition vs just scanning it. Because sd can rescan the attribute at runtime it needs to check if a disk has partitions, for which a new helper is added to genhd.h. Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices") Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-10scsi: sd: Clear sdkp->protection_type if disk is reformatted without PIXiang Chen
If an attached disk with protection information enabled is reformatted to Type 0 the revalidation code does not clear the original protection type and subsequent accesses will keep setting RDPROTECT/WRPROTECT. Set the protection type to 0 if the disk reports PROT_EN=0 in READ CAPACITY(16). [mkp: commit desc] Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type") Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-03compat_ioctl: scsi: move ioctl handling into driversArnd Bergmann
Each driver calling scsi_ioctl() gets an equivalent compat_ioctl() handler that implements the same commands by calling scsi_compat_ioctl(). The scsi_cmd_ioctl() and scsi_cmd_blk_ioctl() functions are compatible at this point, so any driver that calls those can do so for both native and compat mode, with the argument passed through compat_ptr(). With this, we can remove the entries from fs/compat_ioctl.c. The new code is larger, but should be easier to maintain and keep updated with newly added commands. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-12-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
2019-12-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits) scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: target: core: Fix a pr_debug() argument scsi: iscsi: Don't send data to unbound connection scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: bnx2i: fix potential use after free Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: scsi_debug: num_tgts must be >= 0 scsi: lpfc: use hdwq assigned cpu for allocation scsi: arcmsr: fix indentation issues scsi: qla4xxx: fix double free bug scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Controller fatal error through sysfs scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out ...
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-26scsi: sd_zbc: Improve report zones error printoutDamien Le Moal
In the case of a report zones command failure, instead of simply printing the host_byte and driver_byte values returned, print a message that is more human readable and useful, adding sense codes too. To do so, use the already defined sd_print_sense_hdr() and sd_print_result() functions by moving the declaration of these functions into sd.h. Link: https://lore.kernel.org/r/20191125070518.951717-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-07scsi: sd_zbc: add zone open, close, and finish supportAjay Joshi
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH support to allow explicit control of zone states. Contains contributions from Matias Bjorling, Hans Holmberg, Keith Busch and Damien Le Moal. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07Merge tag 'scsi-fixes' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into for-5.5/drivers-post SCSI fixes on 20191101 Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4] and one core change in sd that fixes an I/O failure on DIF type 3 devices. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: qla2xxx: stop timer in shutdown path scsi: sd: define variable dif as unsigned int instead of bool scsi: target: cxgbit: Fix cxgbit_fw4_ack() scsi: qla2xxx: Fix partial flash write of MBI scsi: qla2xxx: Initialized mailbox to prevent driver load failure scsi: lpfc: Honor module parameter lpfc_use_adisc scsi: ufs-bsg: Wake the device before sending raw upiu commands scsi: lpfc: Check queue pointer before use scsi: qla2xxx: fixup incorrect usage of host_byte scsi: lpfc: remove left-over BUILD_NVME defines scsi: core: try to get module before removing device scsi: hpsa: add missing hunks in reset-patch scsi: target: core: Do not overwrite CDB byte 1 scsi: ch: Make it possible to open a ch device multiple times again scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE scsi: sni_53c710: fix compilation error scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions scsi: qla2xxx: fix a potential NULL pointer dereference scsi: MAINTAINERS: Update qla2xxx driver scsi: zfcp: fix reaction on bit error threshold notification ...
2019-10-24scsi: sd: define variable dif as unsigned int instead of boolXiang Chen
Variable dif in function sd_setup_read_write_cmnd() is the return value of function scsi_host_dif_capable() which returns dif capability of disks. If define it as bool, even for the disks which support DIF3, the function still return dif=1, which causes IO error. So define variable dif as unsigned int instead of bool. Fixes: e249e42d277e ("scsi: sd: Clean up sd_setup_read_write_cmnd()") Link: https://lore.kernel.org/r/1571725628-132736-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-23scsi: sd: enable compat ioctls for sed-opalArnd Bergmann
The sed_ioctl() function is written to be compatible between 32-bit and 64-bit processes, however compat mode is only wired up for nvme, not for sd. Add the missing call to sed_ioctl() in sd_compat_ioctl(). Fixes: d80210f25ff0 ("sd: add support for TCG OPAL self encrypting disks") Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-09Merge branch '5.4/scsi-fixes' into 5.5/scsi-queueMartin K. Petersen
The qla2xxx driver updates for 5.5 depend on the fixes queued for 5.4. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: sd: Ignore a failure to sync cache due to lack of authorizationOliver Neukum
I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: core: allow auto suspend override by low-level driverStanley Chu
Rework from previous work by: Sujit Reddy Thumma <sthumma@codeaurora.org> Until now the scsi mid-layer forbids runtime suspend till userspace enables it. This is mainly to quarantine some disks with broken runtime power management or have high latencies executing suspend resume callbacks. If the userspace doesn't enable the runtime suspend the underlying hardware will be always on even when it is not doing any useful work and thus wasting power. Some low-level drivers for the controllers can efficiently use runtime power management to reduce power consumption and improve battery life. Allow runtime suspend parameters override within the LLD itself instead of waiting for userspace to control the power management. Link: https://lore.kernel.org/r/1568649411-5127-2-git-send-email-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-24Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block updates from Jens Axboe: "Some later additions that weren't quite done for the first pull request, and also a few fixes that have arrived since. This contains: - Kill silly pktcdvd warning on attempting to register a non-scsi passthrough device (me) - Use symbolic constants for the block t10 protection types, and switch to handling it in core rather than in the drivers (Max) - libahci platform missing node put fix (Nishka) - Small series of fixes for BFQ (Paolo) - Fix possible nbd crash (Xiubo)" * tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block: block: drop device references in bsg_queue_rq() block: t10-pi: fix -Wswitch warning pktcdvd: remove warning on attempting to register non-passthrough dev ata: libahci_platform: Add of_node_put() before loop exit nbd: fix possible page fault for nbd disk nbd: rename the runtime flags as NBD_RT_ prefixed block, bfq: push up injection only after setting service time block, bfq: increase update frequency of inject limit block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1 block, bfq: update inject limit only after injection occurred block: centralize PI remapping logic to the block layer block: use symbolic constants for t10_pi type
2019-09-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi, lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The only core change this time around is the addition of request batching for virtio. Since batching requires an additional flag to use, it should be invisible to the rest of the drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits) scsi: hisi_sas: Fix the conflict between device gone and host reset scsi: hisi_sas: Add BIST support for phy loopback scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation scsi: hisi_sas: Remove some unused function arguments scsi: hisi_sas: Remove redundant work declaration scsi: hisi_sas: Remove hisi_sas_hw.slot_complete scsi: hisi_sas: Assign NCQ tag for all NCQ commands scsi: hisi_sas: Update all the registers after suspend and resume scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset() scsi: hisi_sas: add debugfs auto-trigger for internal abort time out scsi: virtio_scsi: unplug LUNs when events missed scsi: scsi_dh_rdac: zero cdb in send_mode_select() scsi: fcoe: fix null-ptr-deref Read in fc_release_transport scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code scsi: ufs: Use kmemdup in ufshcd_read_string_desc() ...
2019-09-17block: centralize PI remapping logic to the block layerMax Gurtovoy
Currently t10_pi_prepare/t10_pi_complete functions are called during the NVMe and SCSi layers command preparetion/completion, but their actual place should be the block layer since T10-PI is a general data integrity feature that is used by block storage protocols. Introduce .prepare_fn and .complete_fn callbacks within the integrity profile that each type can implement according to its needs. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY isn't defined in the config. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-07scsi: sd: Improve unaligned completion resid messageDamien Le Moal
For commands completing with a resid not aligned on the device logical sector size, also print the command CDB in addition to the current message to help debug hardware generating such incorrect command completion information. Link: https://lore.kernel.org/r/20190828053511.14818-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-04scsi: implement REQ_OP_ZONE_RESET_ALLChaitanya Kulkarni
This patch implements the zone reset all operation for sd_zbc.c. We add a new boolean parameter for the sd_zbc_setup_reset_cmd() to indicate REQ_OP_ZONE_RESET_ALL command setup. Along with that we add support in the completion path for the zone reset all. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-06-18scsi: sd: Inline sd_probe_part2()Bart Van Assche
Make sd_probe() easier to read by inlining sd_probe_part2(). This patch does not change any functionality. [mkp: applied by hand] Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: sd: Rely on the driver core for asynchronous probingBart Van Assche
As explained during the 2018 LSF/MM session about increasing SCSI disk probing concurrency, the problems with the current probing approach are as follows: - The driver core is unaware of asynchronous SCSI LUN probing. wait_for_device_probe() waits for all asynchronous probes except asynchronous SCSI disk probes. - There is unnecessary serialization between sd_probe() and sd_remove(). This can lead to a deadlock. Hence this patch that modifies the sd driver such that it uses the driver core framework for asynchronous probing. The async domain and get_device()/put_device() pairs that became superfluous due to this change are removed. This patch does not affect the time needed for loading the scsi_debug kernel module with parameters delay=0 and max_luns=256. This patch depends on commit ef0ff68351be ("driver core: Probe devices asynchronously instead of the driver") that went upstream in kernel version v5.1-rc1. Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the same set of patches sent in the merge window as the final pull except that Martin's read only rework is replaced with a simple revert of the original change that caused the regression. Everything else is an obvious fix or small cleanup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Revert "scsi: sd: Keep disk read-only when re-reading partition" scsi: bnx2fc: fix incorrect cast to u64 on shift operation scsi: smartpqi: Reporting unhandled SCSI errors scsi: myrs: Fix uninitialized variable scsi: lpfc: Update lpfc version to 12.2.0.2 scsi: lpfc: add check for loss of ndlp when sending RRQ scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show scsi: lpfc: resolve lockdep warnings scsi: qedi: remove set but not used variables 'cdev' and 'udev' scsi: qedi: remove memset/memcpy to nfunc and use func instead scsi: qla2xxx: Add cleanup for PCI EEH recovery
2019-05-21scsi: sd: add a SPDX tag to sd.cChristoph Hellwig
sd.c is the only sd file missing licensing information. Add a GPLv2 tag for the default kernel license. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20Revert "scsi: sd: Keep disk read-only when re-reading partition"Martin K. Petersen
This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: sd: Revert "Rely on the driver core for asynchronous probing"Bart Van Assche
Hibernation hangs as follows due to commit 21e6ba3f0e02 when using SATA: Call Trace: __schedule+0x464/0xe70 schedule+0x4e/0xd0 blk_queue_enter+0x5fe/0x7e0 generic_make_request+0x313/0x950 submit_bio+0x9b/0x250 submit_bio_wait+0xc9/0x110 hib_submit_io+0x17d/0x1c0 write_page+0x61/0xa0 swap_write_page+0x4b/0x1f0 swsusp_write+0x2f9/0x3d0 hibernate.cold.10+0x108/0x231 state_store+0xf7/0x100 kobj_attr_store+0x37/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x186/0x240 __vfs_write+0x4d/0x90 vfs_write+0xfa/0x260 ksys_write+0xb9/0x1a0 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Hence revert commit 21e6ba3f0e02. Cc: Pavel Machek <pavel@ucw.cz> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: sd: Revert "Inline sd_probe_part2()"Bart Van Assche
Reverts commit d16ece577bf2 to make a clean revert of its predecessor possible. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12Merge branch '5.1/scsi-fixes' into 5.2/mergeMartin K. Petersen
We have a few submissions for 5.2 that depend on fixes merged post 5.1-rc1. Merge the fixes branch into queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12block: disk_events: introduce event flagsMartin Wilck
Currently, an empty disk->events field tells the block layer not to forward media change events to user space. This was done in commit 7c88a168da80 ("block: don't propagate unlisted DISK_EVENTs to userland") in order to avoid events from "fringe" drivers to be forwarded to user space. By doing so, the block layer lost the information which events were supported by a particular block device, and most importantly, whether or not a given device supports media change events at all. Prepare for not interpreting the "events" field this way in the future any more. This is done by adding an additional field "event_flags" to struct gendisk, and two flag bits that can be set to have the device treated like one that had the "events" field set to a non-zero value before. This applies only to the sd and sr drivers, which are changed to set the new flags. The new flags are DISK_EVENT_FLAG_POLL to enforce polling of the device for synchronous events, and DISK_EVENT_FLAG_UEVENT to tell the blocklayer to generate udev events from kernel events. In order to add the event_flags field to struct gendisk, the events field is converted to an "unsigned short"; it doesn't need to hold values bigger than 2 anyway. This patch doesn't change behavior. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: remove CONFIG_LBDAFChristoph Hellwig
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit architectures. These types are required to support block device and/or file sizes larger than 2 TiB, and have generally defaulted to on for a long time. Enabling the option only increases the i386 tinyconfig size by 145 bytes, and many data structures already always use 64-bit values for their in-core and on-disk data structures anyway, so there should not be a large change in dynamic memory usage either. Dropping this option removes a somewhat weird non-default config that has cause various bugs or compiler warnings when actually used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-27scsi: sd: Quiesce warning if device does not report optimal I/O sizeMartin K. Petersen
Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") split one conditional into several separate statements in an effort to provide more accurate warning messages when a device reports a nonsensical value. However, this reorganization accidentally dropped the precondition of the reported value being larger than zero. This lead to a warning getting emitted on devices that do not report an optimal I/O size at all. Remain silent if a device does not report an optimal I/O size. Fixes: a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Reported-by: Hussam Al-Tayeb <ht990332@gmx.com> Tested-by: Hussam Al-Tayeb <ht990332@gmx.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Fix a race between closing an sd device and sd I/OBart Van Assche
The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Inline sd_probe_part2()Bart Van Assche
Make sd_probe() easier to read by inlining sd_probe_part2(). This patch does not change any functionality. Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Rely on the driver core for asynchronous probingBart Van Assche
As explained during the 2018 LSF/MM session about increasing SCSI disk probing concurrency, the problems with the current probing approach are as follows: - The driver core is unaware of asynchronous SCSI LUN probing. wait_for_device_probe() waits for all asynchronous probes except asynchronous SCSI disk probes. - There is unnecessary serialization between sd_probe() and sd_remove(). This can lead to a deadlock. Hence this patch that modifies the sd driver such that it uses the driver core framework for asynchronous probing. The async domains and get_device()/put_device() pairs that became superfluous due to this change are removed. This patch does not affect the time needed for loading the scsi_debug kernel module with parameters delay=0 and max_luns=256. This patch depends on commit ef0ff68351be ("driver core: Probe devices asynchronously instead of the driver") that went upstream in kernel version v5.1-rc1. Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-02-26scsi: sd: Optimal I/O size should be a multiple of physical block sizeMartin K. Petersen
It was reported that some devices report an OPTIMAL TRANSFER LENGTH of 0xFFFF blocks. That looks bogus, especially for a device with a 4096-byte physical block size. Ignore OPTIMAL TRANSFER LENGTH if it is not a multiple of the device's reported physical block size. To make the sanity checking conditionals more readable--and to facilitate printing warnings--relocate the checking to a helper function. No functional change aside from the printks. Cc: <stable@vger.kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199759 Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-12scsi: sd: fix entropy gathering for most rotational disksJames Bottomley
The problem is that the default for MQ is not to gather entropy, whereas the default for the legacy queue was always to gather it. The original attempt to fix entropy gathering for rotational disks under MQ added an else branch in sd_read_block_characteristics(). Unfortunately, the entire check isn't reached if the device has no characteristics VPD page. Since this page was only introduced in SBC-3 and its optional anyway, most less expensive rotational disks don't have one, meaning they all stopped gathering entropy when we made MQ the default. In a wholly unrelated change, openssl and openssh won't function until the random number generator is initialised, meaning lots of people have been seeing large delays before they could log into systems with default MQ kernels due to this lack of entropy, because it now can take tens of minutes to initialise the kernel random number generator. The fix is to set the non-rotational and add-randomness flags unconditionally early on in the disk initialization path, so they can be reset only if the device actually reports being non-rotational via the VPD page. Reported-by: Mikael Pettersson <mikpelinux@gmail.com> Fixes: 83e32a591077 ("scsi: sd: Contribute to randomness when running rotational device") Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Xuewei Zhang <xueweiz@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-12scsi: sd: Remove superfluous residual assignmentsBart Van Assche
Since commit 26e85fcd15f6 ("[SCSI] sd: Permit merged discard requests"; kernel v3.10) sd_done() sets the residual not only for failed special requests but also for special requests that succeeded. Hence remove the code from functions called by sd_init_command() that sets the residual. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: block: remove req->specialChristoph Hellwig
No users left. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-04scsi: sd: Improve sd_print_capacity()Damien Le Moal
There is no need to call twice string_get_size() when the capacity messages are not going to be printed. Reverse the message output condition to return early and avoid executing string_get_size() when it is not necessary. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: sd: Protect against READ(6) or WRITE(6) with zero block transfer lengthBart Van Assche
Since the READ(6) and WRITE(6) commands interpret a zero in the transfer length field in the CDB as 256 logical blocks, avoid submitting such commands. Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: sd: Rename 'SCpnt' into 'cmd'Bart Van Assche
This patch makes the source code more uniform and does not change any functionality. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ bvanassche: extracted this patch from a larger patch ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: sd: Clean up sd_setup_read_write_cmnd()Martin K. Petersen
Rework sd_setup_read_write_cmnd() so it becomes more readable. Put all the sanity checking at the head of the function and sanitize the logged error messages. Move the legacy SCSI logging calls to the end of the functions and reduce conditional nesting. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: sd: Create helper functions for read/write commandsMartin K. Petersen
Create a helper function for each of the 6, 10, 16 and 32-byte READ/WRITE variants and use those when setting up reads and writes. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 and made function names shorter. ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: sd: Simplify misaligned I/O checkMartin K. Petersen
Avoid open coding the checks for the supported logical block sizes and use a mask to check for misaligned I/O. Use our helper functions to scale lba and block count. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: sd: Be consistent about blocks vs. sectorsMartin K. Petersen
We have had several bugs due mixing sector and logical block size terminology. In the block layer, a sector is a 512-byte unit regardless of the logical block size of the underlying device. But the term "sector" is still widely used in sd.c when referring to logical block sized units. We previously introduced helper functions such as sectors_to_logical() and logical_to_sectors() to make the distinction clear. Use these to make the code in sd.c consistent wrt. logical blocks and block layer sectors. Use "lba" to describe a logical block address and "nr_blocks" when counting logical blocks. SBC uses "TRANSFER LENGTH" to describe the latter but this term was avoided to prevent confusion with the very similar DMA transfer size (->transfersize) which is counted in bytes. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: sd: Remove a local variableBart Van Assche
This patch does not change any functionality. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [ bvanassche: extracted this patch from a larger patch ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>