| Age | Commit message (Collapse) | Author |
|---|
|
Just use the disk attached to the request_queue instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
|
|
git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
|
|
Pull SCSI multi-actuator support from Jens Axboe:
"This adds SCSI support for the recently merged block multi-actuator
support. Since this was sitting on top of the block tree, the SCSI
side asked me to queue it up."
* tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block:
doc: Fix typo in request queue sysfs documentation
doc: document sysfs queue/independent_access_ranges attributes
libata: support concurrent positioning ranges log
scsi: sd: add concurrent positioning ranges support
|
|
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
|
|
Add the sd_read_cpr() function to the sd scsi disk driver to discover
if a device has multiple concurrent positioning ranges (i.e. multiple
actuators on an HDD). The existence of VPD page B9h indicates if a
device has multiple concurrent positioning ranges. The page content
describes each range supported by the device.
sd_read_cpr() is called from sd_revalidate_disk() and uses the block
layer functions disk_alloc_independent_access_ranges() and
disk_set_independent_access_ranges() to represent the set of actuators
of the device as independent access ranges.
The format of the Concurrent Positioning Ranges VPD page B9h is defined
in section 6.6.6 of SBC-5.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the method to query for a uniqueue ID of a given type by looking
it up in the cached device identification VPD page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.
As with the error handling for device_add() we follow the same logic and
just put the device so that cleanup is done via the scsi_disk_release().
Link: https://lore.kernel.org/r/20211015233028.2167651-2-mcgrof@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For SD cardreaders it is extremely common not to have a cache.
Consequently, the following messages do not point to a real error one could
try to fix but rather describe how the disk works:
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
Print these messages as warnings instead of errors.
Link: https://lore.kernel.org/r/20211013075050.3870354-1-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for
BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), the following crash
was observed.
static int sd_resume_runtime(struct device *dev)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash
if (sdp->ignore_media_change) {
...
}
It is possible for sdkp to be NULL in sd_resume_runtime(). To fix this
crash, follow sd_resume() to test if sdkp is NULL before dereferencing it.
Crash:
[ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 4.696591][ T151] Mem abort info:
[ 4.697919][ T151] ESR = 0x96000005
[ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.701990][ T151] SET = 0, FnV = 0
[ 4.702513][ T151] EA = 0, S1PTW = 0
[ 4.704431][ T151] FSC = 0x05: level 1 translation fault
[ 4.705254][ T151] Data abort info:
[ 4.705806][ T151] ISV = 0, ISS = 0x00000005
[ 4.706484][ T151] CM = 0, WnR = 0
[ 4.707048][ T151] [0000000000000008] user address but active_mm is swapper
[ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 4.832361][ T151] Kernel Offset: 0x12acc80000 from 0xffffffc010000000
[ 4.833254][ T151] PHYS_OFFSET: 0x40000000
[ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO)
[ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c
[ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4
[ 4.835916][ T151] sp : ffffffc0110db8d0
[ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001
[ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0
[ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000
[ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c
[ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000
[ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078
[ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac
[ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d
[ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0
[ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001
[ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c
[ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000
[ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001
[ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003
[ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260
[ 4.856708][ T151] die+0x16c/0x59c
[ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210
[ 4.857833][ T151] do_page_fault+0xa4/0x654
[ 4.858418][ T151] do_translation_fault+0x6c/0x1b0
[ 4.859083][ T151] do_mem_abort+0x68/0x10c
[ 4.859655][ T151] el1_abort+0x40/0x64
[ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88
[ 4.860834][ T151] el1h_64_sync+0x7c/0x80
[ 4.861395][ T151] sd_resume_runtime+0x20/0x14c
[ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4
[ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc
[ 4.863275][ T151] rpm_resume+0x7e8/0xaa4
[ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110
[ 4.864489][ T151] sd_probe+0x30/0x428
[ 4.865016][ T151] really_probe+0x14c/0x500
[ 4.865602][ T151] __driver_probe_device+0xb4/0x18c
[ 4.866278][ T151] driver_probe_device+0x60/0x2c4
[ 4.866931][ T151] __device_attach_driver+0x228/0x2bc
[ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c
[ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4
[ 4.869038][ T151] process_one_work+0x3ac/0x590
[ 4.869670][ T151] worker_thread+0x320/0x758
[ 4.870265][ T151] kthread+0x2e8/0x35c
[ 4.870792][ T151] ret_from_fork+0x10/0x20
Link: https://lore.kernel.org/r/20211015074654.19615-1-miles.chen@mediatek.com
Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()")
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The following query shows which drivers define callbacks that are called by
the power management support code in the SCSI core (scsi_pm.c):
$ git grep -nHEwA16 "$(echo $(git grep -h 'scsi_register_driver(&' |
sed 's/.*&//;s/\..*//') | sed 's/ /|/g')" |
grep '\.pm[[:blank:]]*=[[:blank:]]'
drivers/scsi/sd.c-620- .pm = &sd_pm_ops,
drivers/scsi/sr.c-100- .pm = &sr_pm_ops,
drivers/scsi/ufs/ufshcd.c-9765- .pm = &ufshcd_wl_pm_ops,
Since unconditionally runtime resuming a device during system resume is not
necessary, remove that code. Modify the SCSI disk (sd) driver such that it
follows the same approach as the UFS driver, namely to skip system suspend
and resume for devices that are runtime suspended. The CD-ROM code does not
need to be updated since its PM callbacks do not affect the device power
state.
This patch has been tested as follows:
[ shell 1 ]
cd /sys/kernel/debug/tracing
grep -E 'blk_(pre|post)_runtime|runtime_(suspend|resume)|autosuspend_delay|pm_runtime_(get|put)' available_filter_functions |
while read a b; do echo "$a"; done |
grep -v __pm_runtime_resume >set_ftrace_filter
echo function > current_tracer
echo 1 > tracing_on
cat trace_pipe
[ shell 2 ]
cd /sys/block/sr0
# Increase the event poll interval to make it easier to derive from the
# tracing output whether runtime power actions are the result of sg_inq.
echo 30000 > events_poll_msecs
cd device/power
# Enable runtime power management.
echo auto > control
echo 1000 > autosuspend_delay_ms
sleep 1
# Verify in shell 1 that sr0 has been runtime suspended
sg_inq /dev/sr0
eject /dev/sr0
sg_inq /dev/sr0
# Disable runtime power management.
echo on > control
cd /sys/block/sda/device/power
echo auto > control
echo 1000 > autosuspend_delay_ms
sleep 1
# Verify in shell 1 that sr0 has been runtime suspended
sg_inq /dev/sda
Link: https://lore.kernel.org/r/20211006215453.3318929-4-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch does not change any functionality but makes the next patch in
this series easier to read.
Link: https://lore.kernel.org/r/20211006215453.3318929-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of implementing asynchronous resume support in the SCSI core, rely
on the device driver core for resuming SCSI devices asynchronously.
Instead of only supporting asynchronous resumes, also support asynchronous
suspends.
Link: https://lore.kernel.org/r/20211006215453.3318929-2-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For devices that explicitly asked for MODE SENSE(10) use, make sure that
scsi_mode_sense() is called with a buffer of at least 8 bytes so that the
sense header fits.
Link: https://lore.kernel.org/r/20210820070255.682775-4-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sd_spinup_disk() is a little bit noisy after commit 848ade90ba9c ("scsi:
sd: Do not exit sd_spinup_disk() quietly"):
scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Media removed, stopped polling
sd 0:0:0:0: [sda] Media removed, stopped polling
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: [sda] Media removed, stopped polling
There's not really a benefit in printing the same message multiple
times. Therefore print it only if media_present was previously set.
Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
Pass in a request_queue and assign disk->queue in __blk_alloc_disk to
ensure struct gendisk always has a valid ->queue pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This was a leftover from the legacy alloc_disk interface. Switch
the scsi ULPs and dasd to set ->minors directly like all other
drivers and remove the argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd]
Link: https://lore.kernel.org/r/20210816131910.615153-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most drivers should use and have been converted to use blk_alloc_disk
and blk_mq_alloc_disk. Only the scsi ULPs and dasd still allocate
a disk separately from the request_queue, so don't bother with
convenience macros for something that should not see significant
new users and remove these wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sd_spinup_disk() function logs what is happening. Unfortunately this
output stops if the media was marked as removed in the meantime. Add a
print for this case too.
Link: https://lore.kernel.org/r/CWXP265MB26803209FD08A64222EEEA02C4FD9@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use bvec_virt instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210804095634.460779-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ensure SCSI ULD only has to call a single ioctl helper. This also adds a
bunch of missing ioctls to the ch driver, and removes the need for a
duplicate implementation of SCSI_IOCTL_SEND_COMMAND command.
Link: https://lore.kernel.org/r/20210724072033.1284840-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Manually verify that the device is not a partition and the caller has admin
privіleges at the beginning of the sr ioctl method and open code the
trivial check for sd as well.
Link: https://lore.kernel.org/r/20210724072033.1284840-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Open code scsi_cmd_blk_ioctl() in its two callers.
Link: https://lore.kernel.org/r/20210724072033.1284840-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Just handle the compat case in scsi_ioctl() using in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Merge the native and compat ioctl handlers into a single one using
in_compat_syscall(), and also simplify the calling conventions by merging
sd_ioctl_common() into sd_ioctl().
Link: https://lore.kernel.org/r/20210724072033.1284840-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For SD card reader devices that have the BLIST_IGN_MEDIA_CHANGE flag
set, a MEDIUM MAY HAVE CHANGED unit attention is established after
resuming from runtime suspend. Send a REQUEST SENSE to consume the UA.
The "downside" is that for these devices we now rely on users to not
change the medium (SD card) *during* a runtime suspend/resume cycle,
i.e. when not unmounting.
To enable runtime PM for an SD cardreader (device number 0:0:0:0), do:
echo 0 > /sys/module/block/parameters/events_dfl_poll_msecs
echo 1000 > /sys/bus/scsi/devices/0:0:0:0/power/autosuspend_delay_ms
echo auto > /sys/bus/scsi/devices/0:0:0:0/power/control
[mkp: use scsi_device flag instead of poking at BLIST]
Link: https://lore.kernel.org/r/20210704075403.147114-3-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
No need to give up the original sd minor even with this option,
and if we did we'd also need to fix the number of minors for
this configuration to actually work.
Fixes: 7c3f828b522b0 ("block: refactor device number setup in __device_add_disk")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
|
|
Pull core block updates from Jens Axboe:
- disk events cleanup (Christoph)
- gendisk and request queue allocation simplifications (Christoph)
- bdev_disk_changed cleanups (Christoph)
- IO priority improvements (Bart)
- Chained bio completion trace fix (Edward)
- blk-wbt fixes (Jan)
- blk-wbt enable/disable fix (Zhang)
- Scheduler dispatch improvements (Jan, Ming)
- Shared tagset scheduler improvements (John)
- BFQ updates (Paolo, Luca, Pietro)
- BFQ lock inversion fix (Jan)
- Documentation improvements (Kir)
- CLONE_IO block cgroup fix (Tejun)
- Remove of ancient and deprecated block dump feature (zhangyi)
- Discard merge fix (Ming)
- Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
Yang)
* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
block: fix discard request merge
block/mq-deadline: Remove a WARN_ON_ONCE() call
blk-mq: update hctx->dispatch_busy in case of real scheduler
blk: Fix lock inversion between ioc lock and bfqd lock
bfq: Remove merged request already in bfq_requests_merged()
block: pass a gendisk to bdev_disk_changed
block: move bdev_disk_changed
block: add the events* attributes to disk_attrs
block: move the disk events code to a separate file
block: fix trace completion for chained bio
block/partitions/msdos: Fix typo inidicator -> indicator
block, bfq: reset waker pointer with shared queues
block, bfq: check waker only for queues with no in-flight I/O
block, bfq: avoid delayed merge of async queues
block, bfq: boost throughput by extending queue-merging times
block, bfq: consider also creation time in delayed stable merge
block, bfq: fix delayed stable merge check
block, bfq: let also stably merged queues enjoy weight raising
blk-wbt: make sure throttle is enabled properly
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
...
|
|
While the disk state has nothing to do with partitions, BLKRRPART is used
to force a full revalidate after things like a disk format for historical
reasons. Restore that behavior.
Link: https://lore.kernel.org/r/20210617115504.1732350-1-hch@lst.de
Fixes: 471bd0af544b ("sd: use bdev_check_media_change")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace the per-block device bd_mutex with a per-gendisk open_mutex,
thus simplifying locking wherever we deal with partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210525061301.2242282-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The driver_byte field in the result is now unused, so we can drop the
definitions.
Link: https://lore.kernel.org/r/20210427083046.31620-15-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().
Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.
[mkp: fix zeroday srp warning]
Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix
|
|
Return the actual error code in __scsi_execute() (which, according to the
documentation, should have happened anyway). And audit all callers to cope
with negative return values from __scsi_execute() and friends.
[mkp: resolve conflict and return bool]
Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The description for scsi_mode_sense() claims to return the number of valid
bytes on success, which is not what the code does. Additionally there is
no gain in returning the SCSI status, as everything the callers do is to
check against scsi_result_is_good(), which is what scsi_mode_sense() does
already. So change the calling convention to return a standard error code
on failure, and 0 on success, and adapt the description and all callers.
Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of using 'retval' to represent first a SCSI status and later
whether or not a disk change event occurred, introduce a new variable for
the latter purpose.
Link: https://lore.kernel.org/r/20210415220826.29438-17-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sd.c:1537: warning: expecting prototype for sd_ioctl(). Prototype was for sd_ioctl_common() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-7-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Drew Eckhardt <drew@colorado.edu>
Cc: Eric Youngdale <eric@andante.org>
Cc: Jirka Hanika <geo@ff.cuni.cz>
Cc: Richard Gooch <rgooch@atnf.csiro.au>
Cc: Torben Mathiasen <tmm@image.dk>
Cc: Alex Davis <letmein@erols.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: willy@debian.org
Cc: Kurt Garloff <garloff@suse.de>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SCSI core has been modified recently such that it only processes PM
requests if rpm_status != RPM_ACTIVE. Since some Opal requests are
submitted while rpm_status != RPM_ACTIVE, set flag RQF_PM for Opal
requests.
See also https://bugzilla.kernel.org/show_bug.cgi?id=211227.
[mkp: updated sha for PM patch]
Link: https://lore.kernel.org/r/20210222021042.3534-1-bvanassche@acm.org
Fixes: d80210f25ff0 ("sd: add support for TCG OPAL self encrypting disks")
Fixes: e6044f714b25 ("scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE")
Cc: chriscjsus@yahoo.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Reported-by: chriscjsus@yahoo.com
Tested-by: chriscjsus@yahoo.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In sd_probe(), print a warning if CONFIG_BLK_DEV_ZONED is disabled and a
TYPE_ZBC device is found. While at it, use IS_ENABLED() to test if
CONFIG_BLK_DEV_ZONED is enabled instead using of a #ifdef.
Link: https://lore.kernel.org/r/20210128055658.530133-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 996e509bbc95 ("sd: use __register_blkdev to avoid a modprobe for an
unregistered dev_t") removed blk_register_region(devt, ...) in sd_remove()
and since then, devt is unused in sd_remove().
Hence, make W=1 warns:
drivers/scsi/sd.c:3516:8:
warning: variable 'devt' set but not used [-Wunused-but-set-variable]
Simply remove this obsolete variable.
[mkp: fixed commit sha]
Link: https://lore.kernel.org/r/20201214095424.12479-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The block layer code will split a large zeroout request into multiple bios
and if WRITE SAME is disabled because the storage device reports that it
does not support it (or support the length used), we can get an error
message from the block layer despite the setting of RQF_QUIET on the first
request. This is because more than one request may have already been
submitted.
Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the
request early, we don't need to log a message because we did not actually
submit the command to the device, and the block layer code will handle the
error by submitting individual write bios.
Link: https://lore.kernel.org/r/20201207221021.28243-1-emilne@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This avoids the extra call to revalidate_disk_size in sd_rescan and
is otherwise a no-op because the size did not change, or we are in
the probe path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch from using blk_register_region to the probe callback passed to
__register_blkdev to disable the request_module call for an unclaimed
dev_t in the SD majors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
