summaryrefslogtreecommitdiff
path: root/drivers/scsi/vmw_pvscsi.c
AgeCommit message (Collapse)Author
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during ↵Cathy Avery
unload Currently pvscsi_remove calls free_irq more than once as pvscsi_release_resources and __pvscsi_shutdown both call pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ' warning and stack trace. To solve the problem pvscsi_shutdown_intr has been moved out of pvscsi_release_resources. Signed-off-by: Cathy Avery <cavery@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: vmw_pscsi: switch to generic DMA APIChristoph Hellwig
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-03scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATEDJim Gill
Commands that are reset are returned with status SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK | SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte to DID_RESET to allow upper layers to retry. Tested by copying a large file between two pvscsi disks on same adapter while performing a bus reset at 1-second intervals. Before fix, commands sometimes fail with DID_OK. After fix, commands observed to fail with DID_RESET. Signed-off-by: Jim Gill <jgill@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-01scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated abortsJim Gill
The vmw_pvscsi driver returns DID_ABORT for commands aborted internally by the adapter, leading to the filesystem going read-only. Change the result to DID_BUS_BUSY, causing the kernel to retry the command. Signed-off-by: Jim Gill <jgill@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: vmw_pvscsi: handle the return value from pci_alloc_irq_vectors correctlyChristoph Hellwig
It returns the number of vectors allocated when successful, so check for a negative error only. Fixes: 2e48e349 ("scsi: vmw_pvscsi: switch to pci_alloc_irq_vectors") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Loïc Yhuel <loic.yhuel@gmail.com> Tested-by: Loïc Yhuel <loic.yhuel@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11scsi: vmw_pvscsi: switch to pci_alloc_irq_vectorsChristoph Hellwig
And simplify the interrupt handler by splitting the INTx case that needs to deal with shared interrupts into a separate helper. [mkp: typo fixage] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jim Gill <jgill@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-01scsi: vmw_pvscsi: return SUCCESS for successful command abortsDavid Jeffery
The vmw_pvscsi driver reports most successful aborts as FAILED to the scsi error handler. This is do to a misunderstanding of how completion_done() works and its interaction with a successful wait using wait_for_completion_timeout(). The vmw_pvscsi driver is expecting completion_done() to always return true if complete() has been called on the completion structure. But completion_done() returns true after complete() has been called only if no function like wait_for_completion_timeout() has seen the completion and cleared it as part of successfully waiting for the completion. Instead of using completion_done(), vmw_pvscsi should just use the return value from wait_for_completion_timeout() to know if the wait timed out or not. [mkp: bumped driver version per request] Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Jim Gill <jgill@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12vmw_pvscsi: Change to update maintainer details (name, email)Jim Gill
[mkp: Updated MAINTAINERS] Signed-off-by: Jim Gill <jgill@vmware.com> Acked-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-10VMW_PVSCSI: Fix the issue of DMA-API related warnings.Josh Boyer
The driver is missing calls to pci_dma_mapping_error() after performing the DMA mapping, which caused DMA-API warning to show up in dmesg's output. Though that happens only when DMA_API_DEBUG option is enabled. This change fixes the issue and makes pvscsi_map_buffers() function more robust. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-24vmw_pscsi: simplify ->change_queue_depthChristoph Hellwig
Remove overly verbose debugging output that pokes into mid-layer internal structures that looks like copy & paste from the mpt2/3 drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: don't allow setting of queue_depth bigger than can_queueChristoph Hellwig
We won't ever queue more commands than the host allows. Instead of letting drivers either reject or ignore this case handle it in common code. Note that various driver use internal constant or variables that are assigned to both shost->can_queue and checked in ->change_queue_depth - I did remove those checks as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12vmw_pvscsi: fixup taggingHannes Reinecke
The request (and SCSI command) tag is the tag number assigned by the generic block-tagging code, not the SCSI-II tag messages. Those are represented by the device flags 'tagged_supported', 'simple_tags', and 'ordered_tags'. (The SCSI midlayer doesn't use HEAD_OF_QUEUE tags). So fixup vmw_pvscsi to assign the correct tag type. [hch: fixed up to never set MSG_ORDERED_TAG] Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: remove ordered_tags scsi_device fieldChristoph Hellwig
Remove the ordered_tags field, we haven't been issuing ordered tags based on it since the big barrier rework in 2010. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-07-29vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-19[SCSI] vmw_pvscsi: Some improvements in pvscsi driver.Arvind Kumar
This change is about the following: (1) If the number of targets is 16+ then default ring_pages to 32. (2) Change default queue depth (per device) to 254. (3) Implement change_queue_depth function so that queue_depth per device can be changed at run time. Honors the request only if coming from sysfs. (4) Clean up the info returned by modinfo. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] vmw_pvscsi: Add support for I/O requests coalescing.Rishi Mehta
This change allows pvscsi driver to coalesce I/O requests before issuing them. The number of I/O's coalesced can be dynamically configured based on the workload. Signed-off-by: Rishi Mehta <rmehta@vmware.com> Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] vmw_pvscsi: Fix pvscsi_abort() function.Arvind Kumar
This change ensures that pvscsi_abort() function returns SUCCESS only when the command in question was actually completed, otherwise returns FAILURE. The code before change, was causing a bug where driver tries to complete a command to the mid-layer while the mid-layer has already requested the driver to abort that command, in response to which the driver has responded with SUCCESS causing mid-layer to free the command struct. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Tested-by: Ewan Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-14SCSI: remove unnecessary pci_set_drvdata()Jingoo Han
Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound), the driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03Drivers: scsi: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-01scsi: fix various printk and comment typosMasanari Iida
Correct spelling typo within drivers/scsi Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-27[SCSI] vmw_pvscsi: Try setting host->max_id as suggested by the device.Arvind Kumar
Fetch the config page from the device to learn max target id to set host->max_id. Also, fix some indentation issues and update the 'Maintained by' field. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-02treewide: Fix typos in various parts of the kernel, and fix some comments.Justin P. Mattock
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16SCSI host lock push-downJeff Garzik
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-08[SCSI] vmw_pvscsi: fix signedness warning with newer compilersDmitry Torokhov
pvscsi_setup_msix() expects 'irq' argument to be an int but is being passed unsigned int. Unsigned int is more proper type for IRQ number so let's use it. This shuts off a compile warning with recent compilers. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Acked-by: Alok Kataria <akataria@vmware.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] vmw_pvscsi: SCSI driver for VMware's virtual HBA.Alok Kataria
This is a driver for VMware's paravirtualized SCSI device, which should improve disk performance for guests running under control of VMware hypervisors that support such devices. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>