summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2022-04-06scsi: megaraid_sas: Target with invalid LUN ID is deleted during scanChandrakanth patil
The megaraid_sas driver supports single LUN for RAID devices. That is LUN 0. All other LUNs are unsupported. When a device scan on a logical target with invalid LUN number is invoked through sysfs, that target ends up getting removed. Add LUN ID validation in the slave destroy function to avoid the target deletion. Link: https://lore.kernel.org/r/20220324094711.48833-1-chandrakanth.patil@broadcom.com Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: ufs: ufshpb: Fix a NULL check on list iteratorXiaomeng Tong
The list iterator is always non-NULL so the check 'if (!rgn)' is always false and the dev_err() is never called. Move the check outside the loop and determine if 'victim_rgn' is NULL, to fix this bug. Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: sd: Clean up gendisk if device_add_disk() failedWenchao Hao
We forgot to call blk_cleanup_disk() when device_add_disk() failed. This would cause a memory leak of gendisk and sched_tags allocated in elevator_init_mq() Reference:https://syzkaller.appspot.com/x/log.txt?x=13b41dcb700000 Reported-and-tested-by: syzbot+f08c77040fa163a75a46@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220401011018.1026553-1-haowenchao@huawei.com Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: mvsas: Add PCI ID of RocketRaid 2640Alexey Galakhov
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell chip. The chip in question was already supported by the kernel, just the PCI ID of this particular board was missing. Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: sd: sd_read_cpr() requires VPD pagesMartin K. Petersen
As such it should be called inside the scsi_device_supports_vpd() conditional. Link: https://lore.kernel.org/r/20220302053559.32147-13-martin.petersen@oracle.com Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support") Cc: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: mpt3sas: Fail reset operation if config request timed outSreekanth Reddy
As part of controller reset operation the driver issues a config request command. If this command gets times out, then fail the controller reset operation instead of retrying it. Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: sym53c500_cs: Stop using struct scsi_pointerFinn Thain
This driver doesn't use SCp.ptr to save a SCSI command data pointer which means "scsi pointer" is a complete misnomer here. Only a few members of struct scsi_pointer are needed so move those to private command data. Link: https://lore.kernel.org/r/accf71e293ba3aed6d18c8baeb405de8dfe7c935.1649235939.git.fthain@linux-m68k.org Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: ufs: ufs-pci: Add support for Intel MTLAdrian Hunter
Add PCI ID and callbacks to support Intel Meteor Lake (MTL). Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com Cc: stable@vger.kernel.org # v5.15+ Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc commentDamien Le Moal
The start_addres argument of mpt3sas_check_same_4gb_region() was misnamed in the function kdoc comment, resulting in the following warning when compiling with W=1. drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Function parameter or member 'start_address' not described in 'mpt3sas_check_same_4gb_region' drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Excess function parameter 'reply_pool_start_address' description in 'mpt3sas_check_same_4gb_region' Fix the argument name in the function kdoc comment to avoid it. While at it, remove a useless blank line between the kdoc and function code. Link: https://lore.kernel.org/r/20220404050041.594774-1-damien.lemoal@opensource.wdc.com Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap useDamien Le Moal
The in_use_bm bitmap of struct sdebug_queue should be accessed under protection of the qc_lock spinlock. Make sure that this lock is taken before calling find_first_bit() at the beginning of the function sdebug_blk_mq_poll(). Link: https://lore.kernel.org/r/20220404045547.579887-1-damien.lemoal@opensource.wdc.com Fixes: 3fd07aecb750 ("scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06Merge branch '5.18/scsi-queue' into 5.18/scsi-fixesMartin K. Petersen
Pull the remaining commits from 5.18/scsi-queue into fixes. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-30scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch"Colin Ian King
There are a few spelling mistakes in some error messages. Fix them. Link: https://lore.kernel.org/r/20220319231445.21696-1-colin.i.king@gmail.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-30scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"Colin Ian King
There are a few spelling mistakes in some error messages. Fix them. Link: https://lore.kernel.org/r/20220319231122.21476-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-30scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()Christophe JAILLET
The error handling path of the probe releases a resource that is not freed in the remove function. In some cases, a ioremap() must be undone. Add the missing iounmap() call in the remove function. Link: https://lore.kernel.org/r/247066a3104d25f9a05de8b3270fc3c848763bcc.1647673264.git.christophe.jaillet@wanadoo.fr Fixes: 45804fbb00ee ("[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI") Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-30scsi: aic7xxx: Use standard PCI subsystem, subdevice definesTom Rix
Common defines should be used over custom defines. Change and remove these defines: - PCIR_SUBVEND_0 to PCI_SUBSYSTEM_VENDOR_ID - PCIR_SUBDEV_0 to PCI_SUBSYSTEM_ID Link: https://lore.kernel.org/r/20220322144648.2467777-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: ufs: qcom: Drop custom Android boot parametersKrzysztof Kozlowski
The QCOM UFS driver requires an androidboot.bootdevice command line argument matching the UFS device name. If the name is different, it refuses to probe. This androidboot.bootdevice is provided by stock/vendor (from an Android-based device) bootloader. This does not make sense from Linux point of view. Driver should be able to boot regardless of bootloader. Driver should not depend on some Android custom environment data. Link: https://lore.kernel.org/r/20220321151853.24138-1-krzk@kernel.org Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: core: sysfs: Remove comments that conflict with the actual logicJackie Liu
Christoph Hellwig Says: ======================= I think we should just handle the error properly and remove the comment. There's no good reason to ignore bsg registration errors. In fact, after commit 92c4b58b15c5 ("scsi: core: Register sysfs attributes earlier"), we are already forced to return errno. We discuss this issue in [1]. [1] https://lore.kernel.org/all/20211022010201.426746-1-liu.yun@linux.dev/ Link: https://lore.kernel.org/r/20220329021251.123805-1-liu.yun@linux.dev Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: hisi_sas: Remove stray fallthrough annotationDan Carpenter
This case statement doesn't fall through any more so remove the fallthrough annotation. Link: https://lore.kernel.org/r/20220317075214.GC25237@kili Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: virtio-scsi: Eliminate anonymous module_init & module_exitRandy Dunlap
Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Link: https://lore.kernel.org/r/20220316192010.19001-6-rdunlap@infradead.org Fixes: 4fe74b1cb051 ("[SCSI] virtio-scsi: SCSI driver for QEMU based virtual machines") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: isci: Fix spelling mistake "doesnt" -> "doesn't"Colin Ian King
There are a few spelling mistakes in dev_warn and dev_err messages. Fix these. Link: https://lore.kernel.org/r/20220316235615.56683-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: core: Fix sbitmap depth in scsi_realloc_sdev_budget_map()John Garry
In commit edb854a3680b ("scsi: core: Reallocate device's budget map on queue depth change"), the sbitmap for the device budget map may be reallocated after the slave device depth is configured. When the sbitmap is reallocated we use the result from scsi_device_max_queue_depth() for the sbitmap size, but don't resize to match the actual device queue depth. Fix by resizing the sbitmap after reallocating the budget sbitmap. We do this instead of init'ing the sbitmap to the device queue depth as the user may want to change the queue depth later via sysfs or other. Link: https://lore.kernel.org/r/1647423870-143867-1-git-send-email-john.garry@huawei.com Fixes: edb854a3680b ("scsi: core: Reallocate device's budget map on queue depth change") Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: aha152x: Stop using struct scsi_pointerFinn Thain
Remove aha152x_cmd_priv.scsi_pointer by moving the necessary members into aha152x_cmd_priv proper. Tested with an Adaptec SlimSCSI APA-1460A card. Link: https://lore.kernel.org/r/bdc1264b6dd331150bffb737958cab8c9c068fa1.1648070977.git.fthain@linux-m68k.org Cc: Christoph Hellwig <hch@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024Tyrel Datwyler
The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is currently an arbitrary value of 800. Increase this value to 1024 which better matches the characteristics of the typical IBMi Initiator that supports 32 LUNs and a queue depth of 32. This change also has the secondary benefit of being a power of two as required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each target has been rounded down to 512 when attempting to kfifo_init() those pools with the current request_limit size of 800. Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: sr: Fix typo in CDROM(CLOSETRAY|EJECT) handlingKevin Groeneveld
Commit 2e27f576abc6 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()") seems to have a typo as it is checking ret instead of cmd in the if statement checking for CDROMCLOSETRAY and CDROMEJECT. This changes the behaviour of these ioctls as the cdrom_ioctl handling of these is more restrictive than the scsi_ioctl version. Link: https://lore.kernel.org/r/20220323002242.21157-1-kgroeneveld@lenbrook.com Fixes: 2e27f576abc6 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: pmcraid: Remove the PMCRAID_PASSTHROUGH_IOCTL ioctl implementationChristophe JAILLET
The whole passthrough ioctl path looks completely broken. For example it DMA maps the scatterlist and after that copies data to it, which is prohibited by the DMA API contract. Moreover, in pmcraid_alloc_sglist(), the pointer returned by a sgl_alloc_order() call is not recorded anywhere which is pointless. So remove the PMCRAID_PASSTHROUGH_IOCTL ioctl implementation entirely. Should it be needed, we should reimplement it using the proper block layer request mapping helpers. Link: https://lore.kernel.org/r/7f27a70bec3f3dcaf46a29b1c630edd4792e71c0.1648298857.git.christophe.jaillet@wanadoo.fr Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: core: scsi_logging: Fix a BUGTomas Henzl
The request_queue may be NULL in a request, for example when it comes from scsi_ioctl_reset(). Check it before use. Fixes: f3fa33acca9f ("block: remove the ->rq_disk field in struct request") Link: https://lore.kernel.org/r/20220324134603.28463-1-thenzl@redhat.com Reported-by: Changhui Zhong <czhong@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: ufs: core: Remove unused field in struct ufs_hbaKeoseong Park
Remove unused fields 'rpm_lvl_attr' and 'spm_lvl_attr' in struct ufs_hba. Commit cbb6813ee771 ("scsi: ufs: sysfs: attribute group for existing sysfs entries.") removed all code using that field. Link: https://lore.kernel.org/r/413601558.101648105683746.JavaMail.epsvc@epcpadp4 Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Keoseong Park <keosung.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()James Smart
The rules changed for lpfc_sli_iocbq_lookup() vs locking. Prior, the routine properly took out the lock. In newly refactored code, the locks must be held when calling the routine. Fix lpfc_sli_process_sol_iocb() to take the locks before calling the routine. Fix lpfc_sli_handle_fast_ring_event() to not release the locks to call the routine. Link: https://lore.kernel.org/r/20220323205545.81814-3-jsmart2021@gmail.com Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Fix broken SLI4 abort pathJames Smart
There was a merge error in ther 14.2.0.0 patches that resulted in the SLI4 path using the SLI3 issue_abort_iotag() routine. This resulted in txcmplq corruption. Fix to use the SLI4 routine when SLI4. Link: https://lore.kernel.org/r/20220323205545.81814-2-jsmart2021@gmail.com Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: <stable@vger.kernel.org> # v5.2+ Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Update lpfc version to 14.2.0.1James Smart
Update lpfc version to 14.2.0.1 Link: https://lore.kernel.org/r/20220317032737.45308-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Fix queue failures when recovering from PCI parity errorJames Smart
When recovering from a pci-parity error the driver is failing to re-create queues, causing recovery to fail. Looking deeper, it was found that the interrupt vector count allocated on the recovery was fewer than the vectors originally allocated. This disparity resulted in CPU map entries with stale information. When the driver tries to re-create the queues, it attempts to use the stale information which indicates an eq/interrupt vector that was no longer created. Fix by clearng the cpup map array before enabling and requesting the IRQs in the lpfc_sli_reset_slot_s4 routine(). Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Fix unload hang after back to back PCI EEH faultsJames Smart
When injecting EEH errors the port is getting hung up waiting on the node list to empty, message number 0233. The driver is stuck at this point and also can't unload. The driver makes transport remoteport delete calls which try to abort I/O's, but the EEH daemon has already called the driver to detach and the detachment has set the global FC_UNLOADING flag. There are several code paths that will avoid I/O cleanup if the FC_UNLOADING flag is set, resulting in transports waiting for I/O while the driver is waiting on transports to clean up. Additionally, during study of the list, a locking issue was found in lpfc_sli_abort_iocb_ring that could corrupt the list. A special case was added to the lpfc_cleanup() routine to call lpfc_sli_flush_rings() if the driver is FC_UNLOADING and if the pci-slot is offline (e.g. EEH). The SLI4 part of lpfc_sli_abort_iocb_ring() is changed to use the ring_lock. Also added code to cancel the I/Os if the pci-slot is offline and added checks and returns for the FC_UNLOADING and HBA_IOQ_FLUSH flags to prevent trying to send an I/O that we cannot handle. Link: https://lore.kernel.org/r/20220317032737.45308-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: lpfc: Improve PCI EEH Error and Recovery HandlingJames Smart
Following EEH errors, the driver can crash or hang when deleting the localport or when attempting to unload. The EEH handlers in the driver did not notify the NVMe-FC transport before tearing the driver down. This was delayed until the resume steps. This worked for SCSI because lpfc_block_scsi() would notify the scsi_fc_transport that the target was not available but it would not clean up all the references to the ndlp. The SLI3 prep for dev reset handler did the lpfc_offline_prep() and lpfc_offline() calls to get the port stopped before restarting. The SLI4 version of the prep for dev reset just destroyed the queues and did not stop NVMe from continuing. Also because the port was not really stopped the localport destroy would hang because the transport was still waiting for I/O. Additionally, a devloss tmo can fire and post events to a stopped worker thread creating another hang condition. lpfc_sli4_prep_dev_for_reset() is modified to call lpfc_offline_prep() and lpfc_offline() rather than just lpfc_scsi_dev_block() to ensure both SCSI and NVMe transports are notified to block I/O to the driver. Logic is added to devloss handler and worker thread to clean up ndlp references and quiesce appropriately. Link: https://lore.kernel.org/r/20220317032737.45308-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: libiscsi: Remove unnecessary memset() in iscsi_conn_setup()Wenchao Hao
iscsi_cls_conn is alloced by kzalloc(), the whole iscsi_cls_conn is zero filled already including the dd_data. So it is unnecessary to call memset again. Link: https://lore.kernel.org/r/20220317150116.194140-1-haowenchao@huawei.com Reviewed-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove()Damien Le Moal
The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure. Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-28Merge tag 'for-linus-5.18-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - A bunch of minor cleanups - A fix for kexec in Xen dom0 when executed on a high cpu number - A fix for resuming after suspend of a Xen guest with assigned PCI devices - A fix for a crash due to not disabled preemption when resuming as Xen dom0 * tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix is_xen_pmu() xen: don't hang when resuming PCI device arch:x86:xen: Remove unnecessary assignment in xen_apic_read() xen/grant-table: remove readonly parameter from functions xen/grant-table: remove gnttab_*transfer*() functions drivers/xen: use helper macro __ATTR_RW x86/xen: Fix kerneldoc warning xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32 xen: use time_is_before_eq_jiffies() instead of open coding it
2022-03-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ...
2022-03-24Merge tag 'flexible-array-transformations-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members
2022-03-23Merge tag 'asm-generic-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...
2022-03-21Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...
2022-03-19Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small(ish) fixes, both in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Finish scsi_cmnd before dropping the spinlock scsi: mpt3sas: Page fault in reply q processing
2022-03-15xen/grant-table: remove readonly parameter from functionsJuergen Gross
The gnttab_end_foreign_access() family of functions is taking a "readonly" parameter, which isn't used. Remove it from the function parameters. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-03-15sr: simplify the local variable initialization in sr_block_open()Lukas Bulwahn
Commit 01d0c698536f ("sr: implement ->free_disk to simplify refcounting") refactored sr_block_open(), initialized one variable with a duplicate assignment (probably an unintended copy & paste duplication) and turned one error case into an early return, which makes the initialization of the return variable needless. So, simplify the local variable initialization in sr_block_open() to make the code a bit more clear. No functional change. No change in resulting object code. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220314150321.17720-1-lukas.bulwahn@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-15scsi: scsi_ioctl: Drop needless assignment in sg_io()Lukas Bulwahn
Commit ce70fd9a551a ("scsi: core: Remove the cmd field from struct scsi_request") refactored sg_io(), so that it does not allocate directly and hence does not return -ENOMEM in its error case. That makes a remaining assignment of -ENOMEM to the return variable needless. Drop this needless assignment in sg_io(). No functional change. No change in resulting object code. Link: https://lore.kernel.org/r/20220315061520.30745-1-lukas.bulwahn@gmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()Lukas Bulwahn
Commit ce70fd9a551a ("scsi: core: Remove the cmd field from struct scsi_request") refactored scsi_bsg_sg_io_fn() so that it does not allocate directly and hence does not return -ENOMEM in its error case. That makes a remaining assignment of -ENOMEM to the return variable needless. Drop this needless assignment in scsi_bsg_sg_io_fn(). No functional change. No change in resulting object code. Link: https://lore.kernel.org/r/20220315055325.14974-1-lukas.bulwahn@gmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: fnic: Finish scsi_cmnd before dropping the spinlockDavid Jeffery
When aborting a SCSI command through fnic, there is a race with the fnic interrupt handler which can result in the SCSI command and its request being completed twice. If the interrupt handler claims the command by setting CMD_SP to NULL first, the abort handler assumes the interrupt handler has completed the command and returns SUCCESS, causing the request for the scsi_cmnd to be re-queued. But the interrupt handler may not have finished the command yet. After it drops the spinlock protecting CMD_SP, it does memory cleanup before finally calling scsi_done() to complete the scsi_cmnd. If the call to scsi_done occurs after the abort handler finishes and re-queues the request, the completion of the scsi_cmnd will advance and try to double complete a request already queued for retry. This patch fixes the issue by moving scsi_done() and any other use of scsi_cmnd to before the spinlock is released by the interrupt handler. Link: https://lore.kernel.org/r/20220311184359.2345319-1-djeffery@redhat.com Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: lpfc: Copyright updates for 14.2.0.0 patchesJames Smart
Update copyrights to 2022 for files modified in the 14.2.0.0 patch set. Link: https://lore.kernel.org/r/20220225022308.16486-18-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: lpfc: Update lpfc version to 14.2.0.0James Smart
Update lpfc version to 14.2.0.0 Link: https://lore.kernel.org/r/20220225022308.16486-17-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: lpfc: SLI path split: Refactor BSG pathsJames Smart
This patch refactors the BSG paths to use SLI-4 as the primary interface. - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-16-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: lpfc: SLI path split: Refactor Abort pathsJames Smart
This patch refactors the Abort paths to use SLI-4 as the primary interface. - Introduce generic lpfc_sli_prep_abort_xri jump table routine - Consolidate lpfc_sli4_issue_abort_iotag and lpfc_sli_issue_abort_iotag into a single generic lpfc_sli_issue_abort_iotag routine - Consolidate lpfc_sli4_abort_fcp_cmpl and lpfc_sli_abort_fcp_cmpl into a single generic lpfc_sli_abort_fcp_cmpl routine - Remove unused routine lpfc_get_iocb_from_iocbq - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-15-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-04-18 21:28:35 +0000