summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2019-10-06soc: imx: imx-scu: Getting UID from SCU should have responseAnson Huang
The SCU firmware API for getting UID should have response, otherwise, the message stored in function stack could be released and then the response data received from SCU will be stored into that released stack and cause kernel NULL pointer dump. Fixes: 73feb4d0f8f1 ("soc: imx-scu: Add SoC UID(unique identifier) support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-09-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-12Merge tag 'qcom-drivers-for-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm ARM Based Driver Updates for v5.4 * Add AOSS QMP support * Various fixups for Qualcomm SCM * Add socinfo driver * Add SoC serial number attribute and associated APIs * Add SM8150 and SC7180 support in Qualcomm SCM * Fixup max processor count in SMEM * tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: aoss: Add AOSS QMP support dt-bindings: soc: qcom: aoss: Add SM8150 and SC7180 support dt-bindings: firmware: scm: Add SM8150 and SC7180 support dt-bindings: firmware: scm: re-order compatible list soc: qcom: smem: Update max processor count soc: qcom: socinfo: Annotate switch cases with fall through soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC. soc: qcom: socinfo: Expose image information soc: qcom: socinfo: Expose custom attributes soc: qcom: Add socinfo driver base: soc: Export soc_device_register/unregister APIs base: soc: Add serial_number attribute to soc firmware: qcom_scm: Cleanup code in qcom_scm_assign_mem() firmware: qcom_scm: Fix some typos in docs and printks firmware: qcom_scm: Use proper types for dma mappings
2019-09-06soc: qcom: geni: Provide parameter error checkingLee Jones
When booting with ACPI, the Geni Serial Engine is not set as the I2C/SPI parent and thus, the wrapper (parent device) is unassigned. This causes the kernel to crash with a null dereference error. Link: https://lore.kernel.org/r/20190905082555.15020-1-lee.jones@linaro.org Fixes: 8bc529b25354 ("soc: qcom: geni: Add support for ACPI") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'samsung-drivers-5.4-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers Samsung soc drivers changes for v5.4, part 2 Fixes and cleanups for recently introduced Exynos chipid driver. * tag 'samsung-drivers-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: chipid: Select missing dependency for EXYNOS_CHIPID soc: samsung: chipid: Remove the regmap lookup error log soc: samsung: chipid: Fix memory leak in error path Link: https://lore.kernel.org/r/20190904175002.10487-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04soc: ti: ti_sci_pm_domains: Add support for exclusive and shared accessLokesh Vutla
TISCI protocol supports for enabling the device either with exclusive permissions for the requesting host or with sharing across the hosts. There are certain devices which are exclusive to Linux context and there are certain devices that are shared across different host contexts. So add support for getting this information from DT by increasing the power-domain cells to 2. For keeping the DT backward compatibility intact, defaulting the device permissions to set the exclusive flag set. In this case the power-domain-cells is 1. Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-drivers-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.4: - A series from Anson Huang to add UID support for i.MX8 SoC and SCU drivers. - A series from Daniel Baluta to add DSP IPC driver for communication between host AP (Linux) and the firmware running on DSP embedded in i.MX8 SoCs. - A small fix for GPCv2 error code printing. - Switch from module_platform_driver_probe() to module_platform_driver() for imx-weim driver, as we need the driver to probe again when device is present later. - Add optional burst clock mode support for imx-weim driver. * tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpcv2: Print the correct error code bus: imx-weim: use module_platform_driver() firmware: imx: Add DSP IPC protocol interface soc: imx-scu: Add SoC UID(unique identifier) support bus: imx-weim: optionally enable burst clock mode firmware: imx: scu-pd: Add IRQSTR_DSP PD range firmware: imx: scu-pd: Add mu13 b side PD range firmware: imx: scu-pd: Rename mu PD range to mu_a soc: imx8: Add i.MX8MM UID(unique identifier) support soc: imx8: Add i.MX8MQ UID(unique identifier) support Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'amlogic-drivers-2.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: updates for v5.4 (round 2) - add power domain controller * tag 'amlogic-drivers-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller Link: https://patchwork.kernel.org/patch/11122205/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'v5.3-next-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers cmdq helper: reoder function parameter and change size of the parameters * tag 'v5.3-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: cmdq: change the type of input parameter soc: mediatek: cmdq: reorder the parameter Link: https://lore.kernel.org/r/8c860e37-3816-d75f-fc37-ce496905ba73@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'amlogic-drivers' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: driver updates for v5.4 Highlights - clk-measure: support new S905X3 and A311D SoCs - socinfo: support new S905X3 and A311D SoCs * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: amlogic: meson-gx-socinfo: Add of_node_put() before return soc: amlogic: clk-measure: Add support for SM1 dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs soc: amlogic: meson-gx-socinfo: add A311D id soc: amlogic: meson-clk-measure: add G12B second cluster cpu clk soc: amlogic: meson-clk-measure: protect measure with a mutex Link: https://lore.kernel.org/r/7h7e77cwv5.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'soc-fsl-next-v5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.4 DPAA2 DPIO/MC driver - Remove explicit device_link_remove() and device_link_del() calls due to framework change DPAA QBman driver - Various changes to make it working with kexec - Remove dev_err() usage after platform_get_irq() GUTS driver - Add LS1028 SoC support * tag 'soc-fsl-next-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: bus: fsl-mc: remove explicit device_link_del soc: fsl: dpio: remove explicit device_link_remove soc: fsl: guts: Add definition for LS1028A soc/fsl/qbman: Update device tree with reserved memory soc/fsl/qbman: Fixup qman_shutdown_fq() soc/fsl/qbman: Disable interrupts during portal recovery soc/fsl/qbman: Fix drain_mr_fqni() soc/fsl/qbman: Cleanup QMan queues if device was already initialized soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup soc/fsl/qbman: Rework QBMan private memory setup soc: fsl: qbman: Remove dev_err() usage after platform_get_irq() Link: https://lore.kernel.org/r/20190816195301.26660-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'renesas-drivers-for-v5.4-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.4 (take two) - Improve "always-on" PM Domain handling on SH/R-Mobile SoCs, - Automatic errata selection for Cortex-A7/A9, - Small fixes and improvements. * tag 'renesas-drivers-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9 soc: renesas: Enable ARM_ERRATA_814220 for affected Cortex-A7 soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domain soc: renesas: rcar-sysc: Eliminate local variable gov soc: renesas: rcar-sysc: Add goto to of_node_put() before return Link: https://lore.kernel.org/r/20190823123643.18799-5-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'samsung-drivers-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers Samsung soc drivers changes for v5.4 Add Exynos Chipid driver for identification of product IDs and SoC revisions. The driver also exposes chipid regmap, later to be used by Exynos Adaptive Supply Voltage driver (adjusting voltages to different revisions of same SoC). * tag 'samsung-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: chipid: Convert exynos-chipid driver to use the regmap API soc: samsung: Add exynos chipid driver support Link: https://lore.kernel.org/r/20190816163042.6604-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TESTGeert Uytterhoeven
The move of the IXP4xx SoC drivers exposed their config options on all platforms. Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block. Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org Fixes: fcf2d8978cd538a5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-28soc: amlogic: Add support for Everything-Else power domains controllerNeil Armstrong
Add support for the General Purpose Amlogic Everything-Else Power controller, with the first support for G12A and SM1 SoCs dedicated to the VPU, PCIe, USB, NNA, GE2D and Ethernet Power Domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-24soc: imx: gpcv2: Print the correct error codeGuido Günther
The current code prints 'ret' (thus 0) while it should use 'err'. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-23soc: mediatek: cmdq: change the type of input parameterBibby Hsieh
According to the cmdq hardware design, the subsys is u8, the offset is u16 and the event id is u16. This patch changes the type of subsys, offset and event id to the correct type. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-23soc: mediatek: cmdq: reorder the parameterBibby Hsieh
The order of gce instructions is [subsys offset value] so reorder the parameter of cmdq_pkt_write_mask and cmdq_pkt_write function. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-23soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9Geert Uytterhoeven
ARM Erratum 754322 affects Cortex-A9 revisions r2p* and r3p*. Automatically enable support code to mitigate the erratum when compiling a kernel for any of the affected Renesas SoCs: - RZ/A1: r3p0, - R-Mobile A1: r2p4, - R-Car M1A: r2p2-00rel0, - R-Car H1: r3p0, - SH-Mobile AG5: r2p2. EMMA Mobile EV2 (r1p3) and RZ/A2 (r4p1) are not affected. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-08-23soc: renesas: Enable ARM_ERRATA_814220 for affected Cortex-A7Geert Uytterhoeven
ARM Erratum 814220 affects Cortex-A7 revisions r0p2-r0p5. Automatically enable support code to mitigate the erratum when compiling a kernel for any of the affected Renesas SoCs: - R-Mobile APE6: r0p2, - RZ/G1E: r0p5, - RZ/G1C: r0p5, - R-Car H2: r0p3, - R-Car E2: r0p5, - RZ/N1: r0p5. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-08-23soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domainGeert Uytterhoeven
Currently the R-Mobile "always-on" PM Domain is implemented by returning -EBUSY from the generic_pm_domain.power_off() callback, and doing nothing in the generic_pm_domain.power_on() callback. However, this means the PM Domain core code is not aware of the semantics of this special domain, leading to boot warnings like the following on SH/R-Mobile SoCs: sh_cmt e6130000.timer: PM domain c5 will not be powered off Fix this by making the always-on nature of the domain explicit instead, by setting the GENPD_FLAG_ALWAYS_ON flag. This removes the need for the domain to provide power control callbacks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-22soc: samsung: chipid: Select missing dependency for EXYNOS_CHIPIDSylwester Nawrocki
The chipid driver uses the MFD syscon API but it was not covered properly in Kconfig. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-22soc: samsung: chipid: Remove the regmap lookup error logSylwester Nawrocki
In commit 40d8aff614f7 ("soc: samsung: chipid: Convert exynos-chipid driver to use the regmap API") of_find_compatible_node() call was substituted with syscon_regmap_lookup_by_compatible() but also an error log was added for case where lookup fails. On multiplatform the lookup will always fail on any non-samsung device so the log is incorrect. Remove the error log and just return an error code from syscon_regmap_lookup_by_compatible() which internally calls of_find_compatible_node(). Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-21soc: qcom: aoss: Add AOSS QMP supportSibi Sankar
Add AOSS QMP support for SM8150 and SC7180 SoCs. Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21soc: qcom: smem: Update max processor countSibi Sankar
Update max processor count to reflect the number of co-processors on SC7180 SoCs. Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-20soc: amlogic: meson-gx-socinfo: Add of_node_put() before returnNishka Dasgupta
The variable np in function meson_gx_socinfo_init takes the return value of of_find_compatible_node, which gets a node but does not put it. If this node is not put it may cause a memory leak. Hence put np after its usefulness has been exhausted. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: a9daaba2965e ("soc: Add Amlogic SoC Information driver") Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20soc: amlogic: clk-measure: Add support for SM1Neil Armstrong
Add the clk-measurer clocks IDs for the Amlogic SM1 SoC family. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDsNeil Armstrong
Add the SoC IDs for the S905X3 Amlogic SM1 SoC. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-19soc: samsung: chipid: Fix memory leak in error pathColin Ian King
Currently when the call to product_id_to_soc_id fails there is a memory leak of soc_dev_attr->revision and soc_dev_attr on the error return path. Fix this by adding a common error return path that frees there obects and use this for two error return paths. Addresses-Coverity: ("Resource leak") Fixes: 3253b7b7cd44 ("soc: samsung: Add exynos chipid driver support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-19soc: renesas: rcar-sysc: Eliminate local variable govGeert Uytterhoeven
As of commit 980532a5dda319ee ("soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON"), the local variable "gov" is assigned just once, so it can be eliminated. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-08-19soc: renesas: rcar-sysc: Add goto to of_node_put() before returnNishka Dasgupta
The local variable np in function rcar_sysc_pd_init takes the return value of of_find_matching_node_and_match(), which gets a node but does not put it. If np is not put before the function returns, it may cause a memory leak. Hence, remove the return statement that does not immediately follow a putting of np. Replace it with a goto pointing to a pre-existing label that first puts np and then returns the required value. Issue found with Coccinelle. Fixes: afa6f53df6052968 ("soc: renesas: rcar-sysc: Add support for fixing up power area tables") Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-15soc: fsl: dpio: remove explicit device_link_removeIoana Ciornei
Starting with commit 72175d4ea4c4 ("driver core: Make driver core own stateful device links") stateful device links are owned by the driver core and should not be explicitly removed on device unbind. Delete all device_link_remove appearances from the dpio driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc: fsl: guts: Add definition for LS1028AYinbo Zhu
Adding compatible string "ls1028a-dcfg" to initialize guts driver for ls1028 and SoC die attribute definition for LS1028A Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Update device tree with reserved memoryRoy Pledge
When using the reserved memory node in the device tree there are two options - dynamic or static. If a dynamic allocation was selected (where the kernel selects the address for the allocation) convert it to a static allocation by inserting the reg property. This will ensure the same memory is reused after a kexec() Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Fixup qman_shutdown_fq()Roy Pledge
When shutting down a FQ on a dedicated channel only the SW portal associated with that channel can dequeue from it. Make sure the correct portal is use. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Disable interrupts during portal recoveryRoy Pledge
Disable the QBMan interrupts during recovery. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Fix drain_mr_fqni()Roy Pledge
The drain_mr_fqni() function may be called fron uninterruptable context so convert the msleep() to an mdelay(). Also ensure that the valid bit is updated while polling. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Cleanup QMan queues if device was already initializedRoy Pledge
If the QMan device was previously initialized make sure all the frame queues are out of service once all the portals are probed. This handles the case where the kernel is restarted without the SoC being reset (kexec for example) Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootupRoy Pledge
Clean the BMan buffer pools if the device had been initialized previously. This will ensure a consistent state if the kernel was soft restarted (kexec for example) Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc/fsl/qbman: Rework QBMan private memory setupRoy Pledge
Rework QBMan private memory setup so that the areas are not zeroed if the device was previously initialized If the QMan private memory was already initialized skip the PFDR initialization. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc: fsl: qbman: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Thierry Reding <treding@nvidia.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15soc: samsung: chipid: Convert exynos-chipid driver to use the regmap APISylwester Nawrocki
Convert the driver to use regmap API in order to allow other drivers, like ASV, to access the CHIPID registers. Add definition of selected CHIPID register offsets and register bit fields for Exynos5422 SoC. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-15soc: samsung: Add exynos chipid driver supportPankaj Dubey
Exynos SoCs have Chipid, for identification of product IDs and SoC revisions. This patch intends to provide initialization code for all these functionalities, at the same time it provides some sysfs entries for accessing these information to user-space. This driver uses existing binding for exynos-chipid. Changes by Bartlomiej: - fixed return values on errors - removed bogus kfree_const() - added missing Exynos4210 EVT0 id - converted code to use EXYNOS_MASK define - fixed np use after of_node_put() - fixed too early use of dev_info() - made driver fail for unknown SoC-s - added SPDX tag - updated Copyrights Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> [m.szyprowski: for suggestion and code snippet of product_id_to_soc_id] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [s.nawrocki: updated copyright date, removed uneeded headers inclusion] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-15Merge tag 'omap-for-v5.3/fixes-rc4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.3-rc cycle We have another fix to disable voltage switching for am57xx SDIO as the bootrom cannot handle all the voltages after a reset that thought I had already sent a pull request for earlier but forgot. And we also update dra74x iodelay configuration for mmc3 to use the recommended values. Then I noticed we had introduced few new boot warnings with the various recent ti-sysc changes and wanted to fix those. I also noticed we still have too many warnings to be able to spot the real ones easily and fixed up few of those. Sure some of the warnings have been around for a long time and few of the fixes could have waited for the merge window, but having more usable dmesg log level output is a valuable. Other fixes are IO size correction for am335x UARTs that cause issues for at least FreeBSD using the same device tree file that checks that the child IO range is not larger than the parent has. For omap1 ams-delta keyboard we need to fix a irq ack that broke with all the recent gpio changes. And there are also few static checker warning fixes for recent am335x PM changes and ti-sysc driver and one switch fall-though update. * tag 'omap-for-v5.3/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ARM: dts: Fix flags for gpio7 bus: ti-sysc: Fix using configured sysc mask value bus: ti-sysc: Fix handling of forced idle ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss ARM: dts: am57xx: Disable voltage switching for SD card Link: https://lore.kernel.org/r/pull-1565844391-332885@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14Merge tag 'ux500-v5.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/soc This is a slew of Ux500 updates for the v5.4 kernel cycle: - Stop populating the PRCMU devices from the core CPU file, it works just fine at device_initcall() level. - Add a missing of_node_put() in the core file. - Simplify the debug UART code. - Add myself to MAINTAINERS * tag 'ux500-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: MAINTAINERS: add soc/ux500 ARM: ux500: simplify and move debug UART ARM: ux500: add missing of_node_put() ARM: ux500: Stop populating the PRCMU devices early Link: https://lore.kernel.org/r/CACRpkdbH-h5fRwuidcpeOp8mtRoKUW65SAk8a4A==BCDzn3QMA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14Merge tag 'renesas-drivers-for-v5.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.4 - Fix a flexible array member definition in the R-Car SYSC driver. * tag 'renesas-drivers-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: rcar-sysc: Use [] to denote a flexible array member Link: https://lore.kernel.org/r/20190802120355.1430-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13soc: ti: pm33xx: Make two symbols staticYueHaibing
Fix sparse warnings: drivers/soc/ti/pm33xx.c:144:27: warning: symbol 'rtc_wake_src' was not declared. Should it be static? drivers/soc/ti/pm33xx.c:160:5: warning: symbol 'am33xx_rtc_only_idle' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13soc: ti: pm33xx: Fix static checker warningsKeerthy
The patch fixes a bunch of static checker warnings. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-12soc: imx-scu: Add SoC UID(unique identifier) supportAnson Huang
Add i.MX SCU SoC's UID(unique identifier) support, user can read it from sysfs: root@imx8qxpmek:~# cat /sys/devices/soc0/soc_uid 7B64280B57AC1898 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>