summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2017-05-19Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "We had a small batch of fixes before -rc1, but here is a larger one. It contains a backmerge of 4.12-rc1 since some of the downstream branches we merge had that as base; at the same time we already had merged contents before -rc1 and rebase wasn't the right solution. A mix of random smaller fixes and a few things worth pointing out: - We've started telling people to avoid cross-tree shared branches if all they're doing is picking up one or two DT-used constants from a shared include file, and instead to use the numeric values on first submission. Follow-up moving over to symbolic names are sent in right after -rc1, i.e. here. It's only a few minor patches of this type. - Linus Walleij and others are resurrecting the 'Gemini' platform, and wanted a cut-down platform-specific defconfig for it. So I picked that up for them. - Rob Herring ran 'savedefconfig' on arm64, it's a bit churny but it helps people to prepare patches since it's a pain when defconfig and current savedefconfig contents differs too much. - Devicetree additions for some pinctrl drivers for Armada that were merged this window. I'd have preferred to see those earlier but it's not a huge deail. The biggest change worth pointing out though since it's touching other parts of the tree: We added prefixes to be used when cross-including DT contents between arm64 and arm, allowing someone to #include <arm/foo.dtsi> from arm64, and likewise. As part of that, we needed arm/foo.dtsi to work on arm as well. The way I suggested this to Heiko resulted in a recursive symlink. Instead, I've now moved it out of arch/*/boot/dts/include, into a shared location under scripts/dtc. While I was at it, I consolidated so all architectures now behave the same way in this manner. Rob Herring (DT maintainer) has acked it. I cc:d most other arch maintainers but nobody seems to care much; it doesn't really affect them since functionality is unchanged for them by default" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) arm64: dts: rockchip: fix include reference firmware: ti_sci: fix strncat length check ARM: remove duplicate 'const' annotations' arm64: defconfig: enable options needed for QCom DB410c board arm64: defconfig: sync with savedefconfig ARM: configs: add a gemini defconfig devicetree: Move include prefixes from arch to separate directory ARM: dts: dra7: Reduce cpu thermal shutdown temperature memory: omap-gpmc: Fix debug output for access width ARM: dts: LogicPD Torpedo: Fix camera pin mux ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES ARM: dts: gta04: fix polarity of clocks for mcbsp4 ARM: dts: dra7: Add power hold and power controller properties to palmas soc: imx: add PM dependency for IMX7_PM_DOMAINS ARM: dts: imx6sx-sdb: Remove OPP override ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin soc: bcm: brcmstb: Correctly match 7435 SoC tee: add ARM_SMCCC dependency ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable ARM64: dts: mediatek: configure some fixed mmc parameters ...
2017-05-19Merge tag 'imx-fixes-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.12: - A fix on GPCv2 power domain driver Kconfig which causes a build failure when CONFIG_PM is not set. - Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious PMIC interrupts from happening. - Remove board level OPP override for imx6sx-sdb to fix a boot crash seen on Rev.C boards. * tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: add PM dependency for IMX7_PM_DOMAINS ARM: dts: imx6sx-sdb: Remove OPP override ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ...
2017-05-15soc: imx: add PM dependency for IMX7_PM_DOMAINSArnd Bergmann
The new pm domain driver causes a build failure when CONFIG_PM is not set: warning: (IMX7_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM) drivers/base/power/domain_governor.c: In function 'default_suspend_ok': drivers/base/power/domain_governor.c:75:17: error: 'struct dev_pm_info' has no member named 'ignore_children' This adds a dependency to ensure that we don't attempt to build the driver without CONFIG_PM. Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-13soc: bcm: brcmstb: Correctly match 7435 SoCFlorian Fainelli
Remove the duplicate brcm,bcm7425-sun-top-ctrl compatible string and replace it with brcm,bcm7435-sun-top-ctrl which was intended. Fixes: bd0faf08dc7f ("soc: bcm: brcmstb: Match additional compatible strings") Reported-by: Andreas Oberritter <obi@saftware.de> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-05-11net: ethernet: ti: netcp_core: return error while dma channel open issueIvan Khoronzhuk
Fix error path while dma open channel issue. Also, no need to check output on NULL if it's never returned. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09Merge tag 'iommu-updates-v4.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...
2017-05-09Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs: Reset subsystem, merged through arm-soc by tradition: - Make bool drivers explicitly non-modular - New support for i.MX7 and Arria10 reset controllers PATA driver for Palmchip BK371 (acked by Tejun) Power domain drivers for i.MX (GPC, GPCv2) - Moved out of mach-imx for GPC - Bunch of tweaks, fixes, etc PMC support for Tegra186 SoC detection support for Renesas RZ/G1H and RZ/G1N Move Tegra flow controller driver from mach directory to drivers/soc - (Power management / CPU power driver) Misc smaller tweaks for other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) soc: pm-domain: Fix the mangled urls soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0 soc: renesas: rcar-sysc: Add support for fixing up power area tables soc: renesas: Register SoC device early soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible soc: imx: gpc: add defines for domain index soc: imx: Add GPCv2 power gating driver dt-bindings: Add GPCv2 power gating driver ARM/clk: move the ICST library to drivers/clk ARM: plat-versatile: remove stale clock header ARM: keystone: Drop PM domain support for k2g soc: ti: Add ti_sci_pm_domains driver dt-bindings: Add TI SCI PM Domains PM / Domains: Do not check if simple providers have phandle cells PM / Domains: Add generic data pointer to genpd data struct soc/tegra: Add initial flowctrl support for Tegra132/210 soc/tegra: flowctrl: Add basic platform driver soc/tegra: Move Tegra flowctrl driver ARM: tegra: Remove unnecessary inclusion of flowctrl header ...
2017-05-09Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: Gemini: - Legacy platform that Linus Walleij has converted to multiplatform and DT, so a handful of various tweaks there, removal of some old stale support, etc. Atmel AT91: - Fixup of various power management related pieces - Move of SoC detection to a drivers/soc driver instead ST Micro STM32: - New SoC support: STM32H743 TI platforms: - More driver support for Davinci (SATA in particular) - Removal of some old stale hwmod files (linkspace platform) Misc: - A couple of smaller patches for i.MX, sunxi, hisi" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) ARM: davinci: Add clock for CPPI 4.1 DMA engine ARM: mxs: add support for I2SE Duckbill 2 boards MAINTAINERS: Update the Allwinner sunXi entry ARM: i.MX25: globally disable supervisor protect ARM: at91: move SoC detection to its own driver ARM: at91: pm: correct typo ARM: at91: pm: Remove at91_pm_set_standby ARM: at91: pm: Merge all at91sam9*_pm_init ARM: at91: pm: Tie the USB clock mask to the pmc ARM: at91: pm: Tie the memory controller type to the ramc id ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories. ARM: at91: pm: Simplify at91rm9200_standby ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S ARM: at91: pm: Move global variables into at91_pm_data ARM: at91: pm: Move at91_ramc_read/write to pm.c ARM: at91: pm: Cleanup headers MAINTAINERS: Add memory drivers to AT91 entry MAINTAINERS: Update AT91 entry ARM: davinci: add pata_bk3710 libata driver support ARM: OMAP2+: mark omap_init_rng as __init ...
2017-05-04soc/qbman: Move dma-mapping.h include to qman_priv.hPaul Gortmaker
With the include there it fixes all build failures in this directory caused by commit 461a6946b1f9. Fixes: 461a6946b1f9 ("iommu: Remove pci.h include from trace/events/iommu.h") Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-03soc/qbman: Fix implicit header dependency now causing build failsPaul Gortmaker
In commit 461a6946b1f9 ("iommu: Remove pci.h include from trace/events/iommu.h") that header shuffle uncovered an implicit include in this driver, manifesting as: CC drivers/soc/fsl/qbman/qman_portal.o drivers/soc/fsl/qbman/qman_portal.c: In function 'qman_portal_probe': drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'dma_set_mask' drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'DMA_BIT_MASK' if (dma_set_mask(dev, DMA_BIT_MASK(40))) { ^ on the corenet32_smp_defconfig (and 64 bit respectively.) The above commit was singled out via git bisect. The header it was implictly relying on getting was dma-mapping.h - so we explicitly add it here. Fixes: 461a6946b1f9 ("iommu: Remove pci.h include from trace/events/iommu.h") Cc: Joerg Roedel <jroedel@suse.de> Cc: Scott Wood <oss@buserror.net> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ...
2017-04-30soc/fsl/qbman: Disable IRQs for deferred QBMan workRoy Pledge
Work for Congestion State Notifications (CSCN) and Message Ring (MR) handling is handled via the workqueue mechanism. This requires the driver to disable those IRQs before scheduling the work and re-enabling it once the work is completed so that the interrupt doesn't continually fire. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functionsValentin Longchamp
This allows to build the fsl_ucc_hdlc driver as a module. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: only apply QE_General4 workaround on affected SoCsValentin Longchamp
The QE_General4 workaround is only valid for the MPC832x and MPC836x SoCs. The other SoCs that embed a QUICC engine are not affected by this hardware bug and thus can use the computed divisors (this was successfully tested on the T1040). Similalry to what was done in commit 8ce795cb0c6b ("i2c: mpc: assign the correct prescaler from SVR") in order to avoid changes in the device tree nodes of the QE (with maybe a variant of the compatible property), the PVR reg is read out to find out if the workaround must be applied or not. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: round brg_freq to 1kHz granularityValentin Longchamp
Because of integer computation rounding in u-boot (that sets the QE brg-frequency DTS prop), the clk value is 99999999 Hz even though it is 100 MHz. When setting brg clks that are exact divisors of 100 MHz, this small differnce plays a role and can result in lower clks to be output (for instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6). This patch fixes that by "forcing" the brg_clk to the nearest kHz when the difference is below 2 integer rounding errors (i.e. 4). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: get rid of immrbar_virt_to_phys()Christophe Leroy
immrbar_virt_to_phys() is not used anymore Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-27Merge branch 'for_4.12/soc-pmdomain-p2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers Pull "Keystone mangled URLs fixed" from Santosh Shilimkar * 'for_4.12/soc-pmdomain-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: pm-domain: Fix the mangled urls
2017-04-24soc: pm-domain: Fix the mangled urlsSantosh Shilimkar
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-04-19Merge tag 'samsung-drivers-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Samsung SoC drivers update for v4.12 - split building of the PMU driver between ARMv7 and ARMv8. * tag 'samsung-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: Do not build ARMv7 PMU drivers on ARMv8 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'renesas-sysc-for-v4.12' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Renesas ARM Based SoC Sysc Updates for v4.12 * Add support for R-Car H3 ES2.0 * tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0 soc: renesas: rcar-sysc: Add support for fixing up power area tables soc: renesas: Register SoC device early base: soc: Allow early registration of a single SoC device base: soc: Let soc_device_match() return no match when called too early Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'zte-drivers-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers ZTE driver updates for 4.12: It includes a couple of small cleanups on zx296718 power domain drivers. * tag 'zte-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: zte: pm_domains: Remove .owner field for driver soc: zte: pm_domains: Remove redundant dev_err call in zx2967_pd_probe() Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'imx-drivers-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers i.MX drivers updates for 4.12: - A series from Lucas Stach which partly rewrites the imx gpc driver to support multiple power domains, and moves the related code from imx platform into drivers folder. - A series from Dong Aisheng which fixes the issues with Lucas' code changes and improves things. - Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE clocks may be stalled during the power up sequencing of the PU power domain. - Add imx-gpcv2 driver to support power domains managed by GPCv2 IP block found on i.MX7 series of SoCs. * tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible soc: imx: gpc: add defines for domain index soc: imx: Add GPCv2 power gating driver dt-bindings: Add GPCv2 power gating driver soc: imx: gpc: remove unnecessary readable_reg callback dt-bindings: imx-gpc: correct the DOMAIN_INDEX using soc: imx: gpc: keep PGC_X_CTRL name align with reference manual soc: imx: gpc: fix comment when power up domain soc: imx: gpc: fix imx6sl gpc power domain regression soc: imx: gpc: fix domain_index sanity check issue soc: imx: gpc: fix the wrong using of regmap cache soc: imx: gpc: fix gpc clk get error handling soc: imx: move PGC handling to a new GPC driver dt-bindings: add multidomain support to i.MX GPC DT binding Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'tegra-for-4.12-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers soc/tegra: Core SoC changes for v4.12-rc1 This contains PMC support for Tegra186 as well as a proper driver for the flow controller found on SoCs up to Tegra210. This also turns the fuse driver into an explicitly non-modular driver. * tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: Add initial flowctrl support for Tegra132/210 soc/tegra: flowctrl: Add basic platform driver soc/tegra: Move Tegra flowctrl driver ARM: tegra: Remove unnecessary inclusion of flowctrl header soc: tegra: make fuse-tegra explicitly non-modular soc/tegra: Fix link errors with PMC disabled soc/tegra: Implement Tegra186 PMC support Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'arm-soc-pmdomain' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers ARM SOC PM domain support for 4.12 Dave Gerlach (5): PM / Domains: Add generic data pointer to genpd data struct PM / Domains: Do not check if simple providers have phandle cells dt-bindings: Add TI SCI PM Domains soc: ti: Add ti_sci_pm_domains driver ARM: keystone: Drop PM domain support for k2g * tag 'arm-soc-pmdomain' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: keystone: Drop PM domain support for k2g soc: ti: Add ti_sci_pm_domains driver dt-bindings: Add TI SCI PM Domains PM / Domains: Do not check if simple providers have phandle cells PM / Domains: Add generic data pointer to genpd data struct Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-07soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0Geert Uytterhoeven
Power area A2VC0 was removed in revision ES2.0, cfr. R-Car Gen3 Hardware User's Manual rev. 0.53E. Hence remove it from the power area table when not running on ES1.x. This is in line with the goal to: 1. Support both the ES1.x and ES2.0 SoC revisions in a single binary for now, 2. Make it clear which code supports ES1.x, so it can easily be identified and removed later, when production SoCs are deemed ubiquitous. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-07soc: renesas: rcar-sysc: Add support for fixing up power area tablesGeert Uytterhoeven
The same SoC may have different power areas, depending on SoC revision. One option is to use different sets of power area tables for each SoC revision. However, if the differences are small, it is much more space-efficient to have a single set of tables, and fix those up at runtime instead. Hence provide a helper to NULLify power areas that do not exist on some revisions (NULLified power areas are skipped during the registration phase), and support for an optional initialization callback to e.g. fix up power area tables. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-07soc: renesas: Register SoC device earlyGeert Uytterhoeven
The r8a7795 SYSC driver manages PM Domains, and thus is initialized from an early_initcall(). However, this means the driver cannot check the SoC revision, as the SoC device hasn't been registered yet. Change renesas_soc_init() from a core_initcall() to an early_initcall() to fix this (renesas-soc.o is listed before rcar-sysc.o in the Makefile). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-07soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driverLucas Stach
On i.MX6QP, due to hardware erratum ERR009619, the PRE clocks may be stalled during the power up sequencing of the PU power domain. As this may lead to a complete loss of display output, the recommended workaround is to keep the PU domain enabled during normal system operation. Implement this by rejecting the domain power down request on the affected SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-07soc: imx: gpc: add defines for domain indexLucas Stach
Makes referencing a specfic domain in the driver code less error prone. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-07soc: imx: Add GPCv2 power gating driverAndrey Smirnov
Add code allowing for control of various power domains managed by GPCv2 IP block found in i.MX7 series of SoCs. Power domains covered by this patch are: - PCIE PHY - MIPI PHY - USB HSIC PHY - USB OTG1/2 PHY Support for any other power domain controlled by GPC is not present, and can be added at some later point. Testing of this code was done against a PCIe driver. Cc: yurovsky@gmail.com Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dong Aisheng <dongas86@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-04soc: ti: Add ti_sci_pm_domains driverDave Gerlach
Introduce a ti_sci_pm_domains driver to act as a generic pm domain provider to allow each device to attach and associate it's ti-sci-id so that it can be controlled through the TI SCI protocol. This driver implements a simple genpd where each device node has a phandle to the power domain node and also must provide an index which represents the ID to be passed with TI SCI representing the device using a single phandle cell. The driver manually parses the phandle to get the cell value. Through this interface the genpd dev_ops start and stop hooks will use TI SCI to turn on and off each device as determined by pm_runtime usage. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-04-04soc/tegra: Add initial flowctrl support for Tegra132/210Jon Hunter
Tegra132 and Tegra210 support the flowctrl module and so add initial support for these devices. Please note that Tegra186 does not support the flowctrl module, so update the initialisation function such that we do not fall back and attempt to map the 'hardcoded' address range for Tegra186. Furthermore 64-bit Tegra devices have always had the flowctrl node defined in their device-tree and so only use the 'hardcoded' addresses for 32-bit Tegra devices. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc/tegra: flowctrl: Add basic platform driverJon Hunter
Add a simple platform driver for the flowctrl module so that it gets registered as a proper device. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc/tegra: Move Tegra flowctrl driverJon Hunter
The flowctrl driver is required for both ARM and ARM64 Tegra devices and in order to enable support for it for ARM64, move the Tegra flowctrl driver into drivers/soc/tegra. By moving the flowctrl driver, tegra_flowctrl_init() is now called by via an early initcall and to prevent this function from attempting to mapping IO space for a non-Tegra device, a test for 'soc_is_tegra()' is also added. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc: tegra: make fuse-tegra explicitly non-modularPaul Gortmaker
The Makefiles currently controlling compilation of this code is: drivers/soc/tegra/Makefile:obj-y += fuse/ drivers/soc/tegra/fuse/Makefile:obj-y += fuse-tegra.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc/tegra: Implement Tegra186 PMC supportThierry Reding
The power management controller on Tegra186 has changed in backwards- incompatible ways with respect to earlier generations. This implements a new driver that supports inversion of the PMU interrupt as well as the "recovery", "bootloader" and "forced-recovery" reboot commands. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-03-31ARM: at91: move SoC detection to its own driverAlexandre Belloni
To simplify machine init and as the soc_device struct is not used as the parent for on-chip devices anymore, move SoC detection to its own driver. Change in dmesg: - before: DMA: preallocated 256 KiB pool for atomic coherent allocations AT91: Detected SoC family: sama5d2 AT91: Detected SoC: sama5d27, revision 0 No ATAGs? clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe085b000 SCSI subsystem initialized - after: DMA: preallocated 256 KiB pool for atomic coherent allocations No ATAGs? clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe0859000 AT91: Detected SoC family: sama5d2 AT91: Detected SoC: sama5d27, revision 0 SCSI subsystem initialized Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31Merge tag 'arm-soc/for-4.12/drivers' of http://github.com/Broadcom/stblinux ↵Arnd Bergmann
into next/drivers Pull "Broadcom drivers changes for 4.12" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC drivers updates for 4.12, please pull the following changes: - Florian updates the Broadcom STB GISB arbiter driver with a bunch of compatible strings for MIPS-based STBs found under arch/mips/boot/dts/brcm/ in order for the SoC identification driver to recognize these chips * tag 'arm-soc/for-4.12/drivers' of http://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Match additional compatible strings
2017-03-28soc: qcom: smd-rpm: Add msm8996 compatibilityBjorn Andersson
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM driver ontop of GLINK for 8996, without any modifications. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28soc: qcom: smd: Remove standalone driverBjorn Andersson
Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28soc: qcom: smd: Transition client drivers from smd to rpmsgBjorn Andersson
By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24soc/qman: export non-programmable FQD fields queryHoria Geantă
Export qman_query_fq_np() function and related structures. This will be needed in the caam/qi driver, where "queue empty" condition will be decided based on the frm_cnt. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: add dedicated channel ID for CAAMHoria Geantă
Add and export the ID of the channel serviced by the CAAM (Cryptographic Acceleration and Assurance Module) DCP. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: export volatile dequeue related structsHoria Geantă
Since qman_volatile_dequeue() is already exported, move the related structures into the public header too. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc: imx: gpc: remove unnecessary readable_reg callbackDong Aisheng
It is not really necessary to provide the current .readable_reg implementation as we know what we're doing in our driver and the regmap core has already done the partial check for available maximum regs. Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: keep PGC_X_CTRL name align with reference manualDong Aisheng
Instead of GPC_PGC_PDN_OFFS, naming it as GPC_PGC_CTRL_OFFS which is defined in reference manual for better reading. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix comment when power up domainDong Aisheng
The correct comment should be power up domain. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix imx6sl gpc power domain regressionDong Aisheng
Commit 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") broke the MX6SL GPC power domain support. It always got the following error: [ 1.248364] imx-gpc 20dc000.gpc: could not find pgc DT node This patch adds back the legecy support. Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>