| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
pmic warpper:
- reduce size by constifying data structures
- use devm_clk_bulk_det_all_enable
mutex:
- reduce size by changing variable bit size
* tag 'v6.11-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-mutex: Reduce type size for mtk_mutex_data members
soc: mediatek: pwrap: Use devm_clk_bulk_get_all_enable()
soc: mediatek: pwrap: Constify some struct int[]
soc: mediatek: pwrap: Constify struct pmic_wrapper_type
Link: https://lore.kernel.org/r/bfa9ab87-9de8-41fc-bfd1-de5ec324cfe0@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.12:
- Support new Amlogic SoCs in meson-gx-ao-secure & meson-gx-socinfo
* tag 'amlogic-drivers-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
Link: https://lore.kernel.org/r/577ad7fe-19b1-468a-b994-573855493fd7@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip AT91 SoC updates for v6.12
It contains:
- support for the Microchip SAM9X7 SoC:
-- power management
-- SoC identification
-- sysreg documentation updates
-- necessary Kconfig updates
* tag 'at91-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: at91: add support in SoC driver for new sam9x7
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: pm: add support for sam9x7 SoC family
dt-bindings: atmel-sysreg: add sam9x7
Link: https://lore.kernel.org/r/20240901133110.2038675-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When TSA is compiled as module the following error is reported:
"ucc_mux_set_grant_tsa_bkpt" [drivers/soc/fsl/qe/tsa.ko] undefined!
Indeed, the ucc_mux_set_grant_tsa_bkpt symbol is not exported.
Simply export ucc_mux_set_grant_tsa_bkpt.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409051409.fszn8rEo-lkp@intel.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.12
- pm33xx/knav_qmss_queue/pruss: Cleanups around device_node scope based cleanups
- knav: Additional fixes around of property
- k3-ringacc: Optimizations for data structure
* tag 'ti-driver-soc-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: pm33xx: do device_node auto cleanup
soc: ti: knav_qmss_queue: do device_node auto cleanup
soc: ti: pruss: do device_node auto cleanup
soc: ti: pruss: factor out memories setup
soc: ti: knav: Use of_property_read_variable_u32_array()
soc: ti: knav: Drop unnecessary check for property presence
soc: ti: k3-ringacc: Constify struct k3_ring_ops
Link: https://lore.kernel.org/r/20240903155632.525twuumykwnfkiz@subtitle
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
QMC driver requires fsl_soc.h to use function get_immrbase().
This header is provided by powerpc architecture and the functions
it declares are defined only when FSL_SOC is selected.
Today the dependency is the following:
depends on CPM1 || QUICC_ENGINE || \
(FSL_SOC && (CPM || QUICC_ENGINE) && COMPILE_TEST)
This dependency tentatively ensure that FSL_SOC is there when doing a
COMPILE_TEST.
CPM1 is only selected by PPC_8xx and cannot be selected manually.
CPM1 selects FSL_SOC
QUICC_ENGINE on the other hand can be selected by ARM or ARM64 which
doesn't select FSL_SOC. QUICC_ENGINE can also be selected with just
COMPILE_TEST.
It is therefore possible to end up with CPM_QMC selected
without FSL_SOC.
So fix it by making it depend on FSL_SOC at all time.
The rest of the above dependency is the same as the one for CPM_TSA on
which CPM_QMC also depends, so it can go away, leaving only a simple
dependency on FSL_SOC.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240904104859.020fe3a9@canb.auug.org.au/
Fixes: 8655b76b7004 ("soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- A series from Hervé Codina that bring support for the newer version
of QMC (QUICC Multi-channel Controller) and TSA (Time Slots Assigner)
found on MPC 83xx micro-controllers.
- Misc changes for qbman freescale drivers for removing a redundant
warning and using iommu_paging_domain_alloc()
* tag 'soc_fsl-6.12-2' of https://github.com/chleroy/linux: (38 commits)
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
soc: fsl: cpm1: qmc: Introduce qmc_data structure
dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller
soc: fsl: cpm1: qmc: Add missing spinlock comment
soc: fsl: cpm1: qmc: Fix 'transmiter' typo
soc: fsl: cpm1: qmc: Remove unneeded parenthesis
soc: fsl: cpm1: qmc: Fix blank line and spaces
...
Link: https://lore.kernel.org/r/326d9a7d-7674-4c28-aa40-dd2c190244dd@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Herve Codina says:
================
This series add support for the QUICC Engine (QE) version of TSA and QMC
components.
CPM1 version is already supported and, as the QE version of those
component are pretty similar to the CPM1 version, the series extend
the already existing drivers to support for the QE version.
The TSA and QMC components are tightly coupled and so the series
provides modifications on both components.
Of course, this series can be split if it is needed. Let me know.
The series is composed of:
- Patches 1 and 2: Fixes related to TRNSYNC in the QMC driver
- Patches 3..6: Fixes of checkpatch detected issues in the TSA driver
- Patch 7: The QE TSA device-tree binding
- Patches 8..13: TSA driver preparations for adding support for QE
- Patches 14 and 15: The support for QE in TSA + MAINTAINERS update
- Patch 16: A TSA API improvement needed for the QE QMC driver
- Patch 17: A clarification in the QE QMC driver
- Patches 18..22: Fixes of checkpatch detected issues in the QMC driver
- Patch 23: The QE QMC device-tree binding
- Patches 24..31: QMC driver preparations for adding support for QE
- Patches 32 and 33: Missing features additions in QE code
- Patches 34..36: The QMC support for QE in QMC + MAINTAINERS update
Compared to the previous iteration, this v2 series updates device-tree
bindings and fixes issues detected by kernel test robots.
Related to the QE QMC device-tree binding, I kept the unit address in
decimal and the 3 compatible strings.
================
Link: https://lore.kernel.org/r/20240808071132.149251-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
This warning was added by commit 07f86917a450 ("soc/fsl/qbman: Use
shared-dma-pool for QMan private memory allocations") but
RESERVEDMEM_OF_DECLARE usage was removed by
commit 3e62273ac63a ("soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE
usage") . For non-popwerpc platforms, such as ls1043, this warning
is redundant. ls1043 itself uses shared-dma-mem.
Fixes: 3e62273ac63a ("soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20240802021651.3854295-1-xiaolei.wang@windriver.com
[chleroy: Added more details in commit message]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
An iommu domain is allocated in portal_set_cpu() and is attached to
pcfg->dev in the same function.
Use iommu_paging_domain_alloc() to make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-14-baolu.lu@linux.intel.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The QUICC Engine (QE) QMC can use a firmware to have the QMC working in
'soft-qmc' mode.
Handle this optional 'soft-qmc' firmware.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-36-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Add support for the QMC (QUICC Multichannel Controller) available in
some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM QMC, this QE QMC does not
use a fixed area for the UCC/SCC parameters area but it uses a dynamic
area allocated and provided to the hardware at runtime.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-35-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Introduce devm_cpm_muram_alloc() and devm_cpm_muram_alloc_fixed(), the
resource-managed version of cpm_muram_alloc and cpm_muram_alloc_fixed().
These resource-managed versions simplify the user avoiding the need to
call cpm_muram_free(). Indeed, the allocated area returned by these
functions will be automatically freed on driver detach.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-33-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of QMC.
In order to prepare the support for the QUICC Engine (QE) version of
QMC, introduce qmc_version to identify versions. This will enable the
code to make the distinction between several QMC implementations.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-32-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles CPM1 version of QMC. Even if GSMRL is specific to
the CPM1 version, the exact same purpose and format register (GUMRL) is
present in the QUICC Engine (QE) version of QMC. Compared to the QE
version, the values defined for the mode bitfield are different and the
0x0A value defined for the QMC mode is CPM1 specific.
In order to prepare the support for the QE version, rename this bitfield
value to clearly identify it as CPM1 specific.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-31-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of QMC, RPACK does not need to
be initialized. This is not the case in the QUICC Engine (QE) version.
In preparation of the support for QE, initialize the RPACK register
when the receiver is initialized and each time it is restarted.
This additional RPACK initialization has no impact in the CPM1 version
of QMC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-30-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles CPM1 version of QMC and qmc_chan_command() is
clearly CPM1 specific.
In order to prepare the support for the QUICC Engine (QE) version,
rename qmc_chan_command() to reflect that point.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-29-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of QMC and initialize the QMC used
SCC. The QUICC Engine (QE) version uses an UCC (Unified Communication
Controllers) instead of the SCC (Serial Communication Controllers) used
in the CPM1 version. These controllers serve the same purpose and are
used in the same way but their inializations are slightly different.
In order to prepare the support for QE version of QMC, introduce
qmc_init_xcc() to initialize theses controllers (UCC in QE and SCC in
CPM1) and isolate the CPM1 specific SCC initialization in a specific
function.
Also introduce qmc_exit_xcc() for consistency to revert operations done
in qmc_init_xcc().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-28-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of QMC. Resources initialisations
(i.e. retrieving base addresses and offsets of different parts) will
be slightly different in the QUICC Engine (QE) version. Indeed, in QE
version, some resources need to be allocated and are no more "staticaly"
defined.
In order to prepare the support for QE version, introduce
qmc_init_resource() to initialize those resources and isolate the CPM1
specific operations in a specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-27-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles CPM1 version of QMC. In the QUICC Engine (QE)
version, some operations done at probe() need to be done in a different
order.
In order to prepare the support for the QE version, changed the sequence
of operation done at probe():
- Retrieve the tsa_serial earlier, before initializing resources.
- Group SCC initialisation and do this initialization when it is really
needed in the probe() sequence.
Having the QE compatible sequence in the CPM1 version does not lead to
any issue and works correctly without any regressions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-26-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles CPM1 version of QMC. Some hardcoded values are used
several times to initialize the QMC state machine. In the QUICC Engine
(QE) version of QMC, these values are different.
In order to prepare the support for the QE version of QMC and avoid the
copy of the hardcoded values, introduce the qmc_data structure to define
these version specific values.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-25-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl raises the following issue
CHECK: spinlock_t definition without comment
Add the missing comments.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-23-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl raises the following issue
CHECK: 'transmiter' may be misspelled - perhaps 'transmitter'?
Indeed, fix it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-22-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl raises the following issue in several places
CHECK: Unnecessary parenthesis around ...
Remove them.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-21-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl raises the following issues
CHECK: Please don't use multiple blank lines
CHECK: Alignment should match open parenthesis
Fix them.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-20-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl signals the following improvement for qmc.c
CHECK: Prefer using the BIT macro
Follow its suggestion and convert the code to BIT() and related macros.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-19-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
QMC_TSA_MASK is a bitfield. The value defined is a specific value of
this bitfield and correspond to the use of 8bit resolution for the
routing entry.
Be accurate and rename the defined constant to reflect this point.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-18-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
TSA consumers in CPM1 implementation don't need to know about the serial
device number used by the TSA component. In QUICC Engine implementation,
this information is needed.
Improve the TSA API with tsa_serial_get_num() in order to provide this
information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-17-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
The QE TSA is similar to the CPM1 TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers).
Also, compared against the CPM1 TSA, this QE TSA can handle up to 4 TDMs
instead of 2 and allows to configure the logic level of sync signals.
At a lower level, compared against CPM TSA implementation, some
registers are slightly different even if same features are present.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-15-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles CPM1 version of TSA.
In order to prepare the support for the QUICC Engine (QE) version of
TSA, introduce tsa_version to identify versions. This will enable the
code to make the distinction between several TSA implementations.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-14-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of TSA. Connecting and
disconnecting the SCC to/from the TSA consists in handling SICR register
which is CPM1 specific. The connection and disconnection operation in
the QUICC Engine (QE) version are slightly different.
In order to prepare the support for the QE version, clearly identify
SICR register as specific to CPM1 and isolate its handling done in
connect and disconnect functions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-13-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of TSA. Setting up TSA consists in
handling SIMODE and SIGMR registers. These registers are CPM1 specific.
Setting up the QUICC Engine (QE) version of TSA is slightly different.
In order to prepare the support for QE version, clearly identify these
registers as CPM1 compatible and isolate their handling in a CPM1
specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-12-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Current code handles the CPM1 version of TSA. Compared against QUICC
Engine (QE) version of TSA, CPM1 SIRAM entries are slightly different.
In order to prepare the support for the QE version, clearly identify
these entries and functions handling them as CPM1 compatible.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-11-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Loops handling the tdm array use hardcoded size and the initialization
part uses hardcoded indexes to initialize the array.
Use ARRAY_SIZE() to avoid the hardcoded size and initialize the array
using a loop.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-10-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
SISTR, SICMR and SIRP registers offset definitions are not used.
In order to avoid unneeded code, remove them.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-9-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl raises the following issue
CHECK: spinlock_t definition without comment
Add the missing comment.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-7-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl raises the following issues
CHECK: Please don't use multiple blank lines
CHECK: spaces preferred around that '/' (ctx:VxV)
CHECK: spaces preferred around that '+' (ctx:VxV)
CHECK: spaces preferred around that '-' (ctx:VxV)
Fix them.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-6-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
checkpatch.pl signals the following improvement for tsa.c
CHECK: Prefer using the BIT macro
Follow its suggestion and convert the code to BIT() and related macros.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-5-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The tsa_write8() parameter is an u32 value. This is not consistent with
the function itself. Indeed, tsa_write8() writes an 8bits value.
Be consistent and use an u8 parameter value.
Fixes: 1d4ba0b81c1c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-4-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The TRNSYNC feature is enabled whatever the number of time-slots used.
The feature is needed only when more than one time-slot is used.
Improve the driver enabling TRNSYNC only when it is needed.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-3-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The TRNSYNC feature is available (and enabled) only in transparent mode.
Since commit 7cc9bda9c163 ("soc: fsl: cpm1: qmc: Handle timeslot entries
at channel start() and stop()") TRNSYNC register is updated in
transparent and hdlc mode. In hdlc mode, the address of the TRNSYNC
register is used by the QMC for other internal purpose. Even if no weird
results were observed in hdlc mode, touching this register in this mode
is wrong.
Update TRNSYNC only in transparent mode.
Fixes: 7cc9bda9c163 ("soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-2-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.12-rc1
This is a single patch that simplifies code a little by employing the
new scoped OF helpers.
* tag 'tegra-for-6.12-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Simplify with scoped for each OF child loop
Link: https://lore.kernel.org/r/20240830141004.3195210-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/drivers
Some long due cleanups and modernizations of the Versatile
SoC drivers from Krzysztof:
- Put OF handle
- Use devres to avoid memory leaks
- Enable compile testing
* tag 'versatile-soc-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
soc: versatile: enable compile testing
soc: versatile: realview: fix soc_dev leak during device remove
soc: versatile: realview: fix memory leak during device remove
soc: versatile: integrator: fix OF node leak in probe() error path
Link: https://lore.kernel.org/r/CACRpkda244rFHnnXPDPOhmKiJsRP08tNCcfFzpH5zR2cx1DFpw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
rk3308 io-domains, and some default settings for bits in the general
register files for rk3128 and the new rk3576 soc.
* tag 'v6.12-rockchip-drivers-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Add rk3576 default GRF values
dt-bindings: soc: rockchip: Add rk3576 syscon compatibles
soc: rockchip: grf: Set RK3128's vpu main clock
soc: rockchip: io-domain: Add RK3308 IO voltage domains
dt-bindings: power: rockchip: Document RK3308 IO voltage domains
Link: https://lore.kernel.org/r/23316481.ssLaC8jLEa@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable compile testing for broader build coverage. None of the drivers
use anything from "asm", so code should build everywhere.
CONFIG_PLAT_VERSATILE is being selected by driver dependencies
(CONFIG_ARCH_INTEGRATOR and CONFIG_ARCH_REALVIEW), so directory can be
always added to Makefile targets without impacting other configurations.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-4-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If device is unbound, the soc_dev should be unregistered to prevent
memory leak.
Fixes: a2974c9c1f83 ("soc: add driver for the ARM RealView")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-3-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If device is unbound, the memory allocated for soc_dev_attr should be
freed to prevent leaks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-2-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Driver is leaking OF node reference obtained from
of_find_matching_node().
Fixes: f956a785a282 ("soc: move SoC driver for the ARM Integrator")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-1-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
