summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2022-04-25soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definitionJason-JH.Lin
Using mt8183 MDO0 and SOF0 definition instead of creating new one for mt8195. Fixes: 8fdb61f1933a ("soc: mediatek: add mtk-mutex support for mt8195 vdosys0") Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Link: https://lore.kernel.org/r/20220425034537.28989-1-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-04-25soc: renesas: rcar-rst: Add support for R-Car V4HYoshihiro Shimoda
Add support for R-Car V4H (R8A779G0) to the R-Car RST driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220420084255.375700-12-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-25soc: renesas: Identify R-Car V4HYoshihiro Shimoda
Add support for identifying the R-Car V4H (R8A779G0) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220420084255.375700-11-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-25soc: renesas: r8a779g0-sysc: Add r8a779g0 supportYoshihiro Shimoda
Add support for R-Car V4H (R8A779G0) SoC power areas and register access. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220420084255.375700-10-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-22soc: ti: wkup_m3_ipc: Add support for toggling VTT regulatorDave Gerlach
Some boards like the AM335x EVM-SK and AM437x GP EVM provide software control via a GPIO pin to toggle the DDR VTT regulator to reduce power consumption in low power states. The VTT regulator should be disabled after enabling self-refresh on suspend, and should be enabled before disabling self-refresh on resume. This is to allow proper self-refresh entry/exit commands to be transmitted to the memory. The "ti,vtt-gpio-pin" device tree property in the wkup_m3_ipc node specifies which GPIO pin to use. This property is communicated to the Wakeup Cortex M3 co-processor where the actual toggling of the GPIO pin happens in CM3 firmware [1]. Please note that the GPIO pin must be on the GPIO0 module as that module is in the wakeup power domain. [1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/tree/src/pm_services/ddr.c?h=08.02.00.006#n190 Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> [dfustini: remove the unnecessary "ti,needs-vtt-toggle" property] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220409211215.2529387-3-dfustini@baylibre.com
2022-04-22soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of ↵Minghao Chi
pm_runtime_get_sync Using pm_runtime_resume_and_get is more appropriate for simplifying code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220418062955.2557949-1-chi.minghao@zte.com.cn
2022-04-22Merge tag 'v5.18-next-vdso0-stable-tag' into v5.18-next/socMatthias Brugger
2022-04-22soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0jason-jh.lin
The mmsys routing table of mt8195 vdosys0 has 2 DITHER components, so mmsys need to add DDP_COMPONENT_DITHER1 and change all usages of DITHER enum form DDP_COMPONENT_DITHER to DDP_COMPONENT_DITHER0. But its header need to keep DDP_COMPONENT_DITHER enum until drm/mediatek also changed it. Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Link: https://lore.kernel.org/r/20220419094143.9561-7-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-04-22soc: mediatek: add mtk-mutex support for mt8195 vdosys0jason-jh.lin
Add mtk-mutex support for mt8195 vdosys0. Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Fei Shao <fshao@chromium.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Link: https://lore.kernel.org/r/20220419094143.9561-3-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-04-22soc: mediatek: add mtk-mmsys support for mt8195 vdosys0jason-jh.lin
1. Add mt8195 mmsys compatible for 2 vdosys. 2. Add io_start into each driver data of mt8195 vdosys. 3. Add get match data function to identify mmsys by io_start. 4. Add mt8195 routing table settings of vdosys0. Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://lore.kernel.org/r/20220419094143.9561-2-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-04-20soc: mediatek: cmdq: Use mailbox rx_callback instead of cmdq_task_cbChun-Kuang Hu
rx_callback is a standard mailbox callback mechanism and could cover the function of proprietary cmdq_task_cb, so use the standard one instead of the proprietary one. Client has changed to use the standard callback machanism and sync dma buffer in client driver, so remove the proprietary callback in cmdq helper. Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: jason-jh.lin <jason-jh.lin@mediatek.com> Tested-by: jason-jh.lin <jason-jh.lin@mediatek.com> Link: https://lore.kernel.org/r/1650102868-26219-1-git-send-email-chunkuang.hu@kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-04-19soc: qcom: socinfo: Sort out 8974PRO namesLuca Weiss
MSM8974PRO is commonly used for referring to Snapdragon 801, compared to MSM8974 which is Snapdragon 800. The Snapdragon 801 has three variants with different clock speeds, with the -AA, -AB and -AC suffix. Adjust the names in socinfo to reflect this. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220415195449.617040-1-luca@z3ntu.xyz
2022-04-15soc: ti: knav_dma: Use pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi
Using pm_runtime_resume_and_get is more appropriate for simplifying code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20220412082923.2532649-1-chi.minghao@zte.com.cn
2022-04-15soc: ti: ti_sci_pm_domains: Check for null return of devm_kcallocQintaoShen
The allocation funciton devm_kcalloc may fail and return a null pointer, which would cause a null-pointer dereference later. It might be better to check it and directly return -ENOMEM just like the usage of devm_kcalloc in previous code. Signed-off-by: QintaoShen <unSimple1993@163.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/1648107843-29077-1-git-send-email-unSimple1993@163.com
2022-04-15soc: ti: omap_prm: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)
Since omap_prm_id_table all have (and expected to have) data entries, use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220307033736.2075221-1-chi.minghao@zte.com.cn
2022-04-12soc: qcom: smem: validate fields of shared structuresDeepak Kumar Singh
Structures in shared memory that can be modified by remote processors may have untrusted values, they should be validated before use. Adding proper validation before using fields of shared structures. Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1646147913-15791-2-git-send-email-quic_deesin@quicinc.com
2022-04-12soc: qcom: smem: map only partitions used by local HOSTDeepak Kumar Singh
SMEM driver is IO mapping complete region and CPU is doing a speculative read into a partition where local HOST does not have permission resulting in a NOC error. Map only those partitions which are accessibly to local HOST. Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1646147913-15791-1-git-send-email-quic_deesin@quicinc.com
2022-04-11soc: qcom: llcc: Add MODULE_DEVICE_TABLE()Bjorn Andersson
The llcc-qcom driver can be compiled as a module, but lacks MODULE_DEVICE_TABLE() and will therefore not be loaded automatically. Fix this. Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220408213336.581661-3-bjorn.andersson@linaro.org
2022-04-11soc: ti: pruss: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Dave Gerlach <d-gerlach@ti.com> Link: https://lore.kernel.org/r/20220408080853.2494292-1-chi.minghao@zte.com.cn
2022-04-11soc: ti: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Link: https://lore.kernel.org/r/20220324072503.63244-1-jakobkoschel@gmail.com
2022-04-11soc: ti: wkup_m3_ipc: fix platform_get_irq.cocci warningYihao Han
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220303124444.3373-1-hanyihao@vivo.com
2022-04-10soc: rockchip: set dwc3 clock for rk3566Peter Geis
The rk3566 dwc3 otg port clock is unavailable at boot, as it defaults to the combophy as the clock source. As combophy0 doesn't exist on rk3566, we need to set the clock source to the usb2 phy instead. Add handling to the grf driver to handle this on boot. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220408151237.3165046-3-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-04-10soc: rockchip: pm_domains: Fix typo in commentSebastian Fricke
s/eject devices form power domain/eject devices from the power domain/ Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Link: https://lore.kernel.org/r/20220326183451.66115-1-sebastian.fricke@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-04-10soc: imx: imx8m-blk-ctrl: Fix IMX8MN_DISPBLK_PD_ISI hangAdam Ford
The imx8mn clock list for the ISI lists four clocks, but DOMAIN_MAX_CLKS was set to 3. Because of this, attempts to enable the fourth clock failed, threw some splat, and ultimately hung. Fixes: 7f511d514e8c ("soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-08soc: imx: gpcv2: add support for i.MX8MP power domainsLucas Stach
This adds driver support for all the GPC power domains found on the i.MX8MP SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-08soc: imx: gpcv2: add PGC control register indirectionLucas Stach
The PGC control registers in the shared (not per-PGC) region of the GPC address space have different offsets on i.MX8MP to make space for additional interrupt control registers. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-07soc: qcom: pdr: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220324072435.63070-1-jakobkoschel@gmail.com
2022-04-07soc: qcom: rpmhpd: Add SDX65 power domainsRohit Agarwal
Add power domains found in Qualcomm SDX65 SoC. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1647410837-22537-5-git-send-email-quic_rohiagar@quicinc.com
2022-04-07soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipcMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com
2022-04-07soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipcMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 50e99641413e ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com
2022-04-07soc: qcom: socinfo: Add another ID for SM8450Dmitry Baryshkov
Add another id for SM8450. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220228190013.1790617-1-dmitry.baryshkov@linaro.org
2022-04-07soc: qcom: socinfo: add SC7280 entry to soc_id arrayDouglas Anderson
Add an entry for SC7280 SoC. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220321161546.1.Ifc4270fbe9bad536f08a47696e00cca5a0714abd@changeid
2022-04-06soc/tegra: pmc: Update Tegra234 reset sourcesSandipan Patra
Update the tegra234_reset_sources array to contain all reset sources for Tegra234 and NULL out the entries that do not actually exist. Signed-off-by: Sandipan Patra <spatra@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-04-06soc/tegra: fuse: Add nvmem cell lookup entries for Tegra194Sagar Kamble
Add nvmem cell lookup entries for below FUSE cells: - gcplex-config-fuse - pdi0 - pdi1 Also include the device name prefix "gpu-" in the names of the GPU FUSE cells in nvmem_cell_info. Signed-off-by: Sagar Kamble <skamble@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-04-04soc: mediatek: mmsys: Add sw0_rst_offset for MT8192AngeloGioacchino Del Regno
MT8192 has the same sw0 reset offset as MT8186: add the parameter to be able to use mmsys as a reset controller for managing at least the DSI reset line. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Link: https://lore.kernel.org/r/20220323091932.10648-1-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-04-04soc: renesas: Identify RZ/G2UL SoCBiju Das
Add support for identifying the RZ/G2UL SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220315142644.17660-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-23Merge tag 'arm-drivers-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "There are a few separately maintained driver subsystems that we merge through the SoC tree, notable changes are: - Memory controller updates, mainly for Tegra and Mediatek SoCs, and clarifications for the memory controller DT bindings - SCMI firmware interface updates, in particular a new transport based on OPTEE and support for atomic operations. - Cleanups to the TEE subsystem, refactoring its memory management For SoC specific drivers without a separate subsystem, changes include - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP Layerscape SoCs. - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L, and Qualcomm SM8450. - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older NVIDIA Tegra chips" * tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits) ARM: spear: fix typos in comments soc/microchip: fix invalid free in mpfs_sys_controller_delete soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings ARM: at91: add support in soc driver for new SAMA5D29 soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC memory: emif: check the pointer temp in get_device_details() memory: emif: Add check for setup_interrupts dt-bindings: arm: mediatek: mmsys: add support for MT8186 dt-bindings: mediatek: add compatible for MT8186 pwrap soc: mediatek: pwrap: add pwrap driver for MT8186 SoC soc: mediatek: mmsys: add mmsys reset control for MT8186 soc: mediatek: mtk-infracfg: Disable ACP on MT8192 soc: ti: k3-socinfo: Add AM62x JTAG ID soc: mediatek: add MTK mutex support for MT8186 soc: mediatek: mmsys: add mt8186 mmsys routing table soc: mediatek: pm-domains: Add support for mt8186 dt-bindings: power: Add MT8186 power domains soc: mediatek: pm-domains: Add support for mt8195 ...
2022-03-23Merge tag 'arm-soc-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "SoC specific code is generally used for older platforms that don't (yet) use device tree to do the same things. - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller from NXP. At the moment this is still incomplete as other portions are merged through different trees. - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms gets removed, now the Arm NOMMU platforms are limited to the Cortex-M family of microcontrollers - Two old PXA boards get removed, along with corresponding driver bits. - Continued cleanup of the Intel IXP4xx platforms, removing some remnants of the old board files. - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung - CPU idle support for AT91 - A system controller driver for Polarfire" * tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: remove support for NOMMU ARMv4/v5 ARM: PXA: fix up decompressor code soc: microchip: make mpfs_sys_controller_put static ARM: pxa: remove Intel Imote2 and Stargate 2 boards ARM: mmp: Fix failure to remove sram device ARM: mstar: Select ARM_ERRATA_814220 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency ARM: ixp4xx: Convert to SPARSE_IRQ and P2V ARM: ixp4xx: Drop all common code ARM: ixp4xx: Drop custom DMA coherency and bouncing ARM: ixp4xx: Remove feature bit accessors net: ixp4xx_hss: Check features using syscon net: ixp4xx_eth: Drop platform data support soc: ixp4xx-npe: Access syscon regs using regmap soc: ixp4xx: Add features from regmap helper ...
2022-03-21Merge tag 'pm-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly fixes and cleanups all over the code and a new piece of documentation for Intel uncore frequency scaling. Functionality-wise, the intel_idle driver will support Sapphire Rapids Xeons natively now (with some extra facilities for controlling C-states more precisely on those systems), virtual guests will take the ACPI S4 hardware signature into account by default, the intel_pstate driver will take the defualt EPP value from the firmware, cpupower utility will support the AMD P-state driver added in the previous cycle, and there is a new tracer utility for that driver. Specifics: - Allow device_pm_check_callbacks() to be called from interrupt context without issues (Dmitry Baryshkov). - Modify devm_pm_runtime_enable() to automatically handle pm_runtime_dont_use_autosuspend() at driver exit time (Douglas Anderson). - Make the schedutil cpufreq governor use to_gov_attr_set() instead of open coding it (Kevin Hao). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the cpufreq longhaul driver (Rafael Wysocki). - Unify show() and store() naming in cpufreq and make it use __ATTR_XX (Lianjie Zhang). - Make the intel_pstate driver use the EPP value set by the firmware by default (Srinivas Pandruvada). - Re-order the init checks in the powernow-k8 cpufreq driver (Mario Limonciello). - Make the ACPI processor idle driver check for architectural support for LPI to avoid using it on x86 by mistake (Mario Limonciello). - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add 'preferred_cstates' module argument to the intel_idle driver to work around C1 and C1E handling issue on Sapphire Rapids (Artem Bityutskiy). - Add core C6 optimization on Sapphire Rapids to the intel_idle driver (Artem Bityutskiy). - Optimize the haltpoll cpuidle driver a bit (Li RongQing). - Remove leftover text from intel_idle() kerneldoc comment and fix up white space in intel_idle (Rafael Wysocki). - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). - Add DTPM hierarchy description (Daniel Lezcano). - Change the locking scheme in DTPM (Daniel Lezcano). - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer release (Daniel Lezcano). - Make dtpm_node_callback[] static (kernel test robot). - Fix spelling mistake "initialze" -> "initialize" in dtpm_create_hierarchy() (Colin Ian King). - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui)" * tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits) cpufreq: powernow-k8: Re-order the init checks cpuidle: intel_idle: Drop redundant backslash at line end cpuidle: intel_idle: Update intel_idle() kerneldoc comment PM: hibernate: Honour ACPI hardware signature by default for virtual guests cpufreq: intel_pstate: Use firmware default EPP cpufreq: unify show() and store() naming and use __ATTR_XX PM: core: keep irq flags in device_pm_check_callbacks() cpuidle: haltpoll: Call cpuidle_poll_state_init() later Documentation: amd-pstate: add tracer tool introduction tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state tools/power/x86/intel_pstate_tracer: make tracer as a module cpufreq: amd-pstate: Add more tracepoint for AMD P-State module PM: sleep: Add device name to suspend_report_result() turbostat: fix PC6 displaying on some systems intel_idle: add core C6 optimization for SPR intel_idle: add 'preferred_cstates' module argument intel_idle: add SPR support PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend() ACPI: processor idle: Check for architectural support for LPI cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function ...
2022-03-18soc/microchip: fix invalid free in mpfs_sys_controller_deleteConor Dooley
Fix an invalid kfree in mpfs_sys_controller_delete, by replacing the devm_kzalloc with a regular kzalloc. Change the error handling in the probe function to free the sys_controller struct if the probe fails. > cocci warnings: (new ones prefixed by >>) > >> drivers/soc/microchip/mpfs-sys-controller.c:73:1-6: WARNING: invalid free of devm_ allocated data Link: https://lore.kernel.org/linux-mm/202203180259.lgIylRZV-lkp@intel.com/ Fixes: d0054a470c33 ("soc: add microchip polarfire soc system controller") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <mail@conchuod.ie> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'soc-fixes-5.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here is a third set of fixes for the soc tree, well within the expected set of changes. Maintainer list changes: - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses - Broadcom iProc has a new git tree Regressions: - Robert Foss sends a revert for a Mediatek DPI bridge patch that caused an inadvertent break in the DT binding - mstar timers need to be included in Kconfig Devicetree fixes for: - Aspeed ast2600 spi pinmux - Tegra eDP panels on Nyan FHD - Tegra display IOMMU - Qualcomm sm8350 UFS clocks - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm sm8450, and Broadcom BCM2711" * tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 MAINTAINERS: Update Jisheng's email address Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint" dt-bindings: drm/bridge: anx7625: Revert DPI support ARM: dts: aspeed: Fix AST2600 quad spi group MAINTAINERS: update Krzysztof Kozlowski's email MAINTAINERS: Update git tree for Broadcom iProc SoCs ARM: tegra: Move Nyan FHD panels to AUX bus arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias ARM: mstar: Select HAVE_ARM_ARCH_TIMER soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint ARM: boot: dts: bcm2711: Fix HVS register range arm64: dts: qcom: c630: disable crypto due to serror arm64: dts: qcom: sm8450: fix apps_smmu interrupts arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb arm64: dts: qcom: sm8350: Correct UFS symbol clocks arm64: tegra: Disable ISO SMMU for Tegra194 Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
2022-03-08Merge tag 'amlogic-drivers-for-v5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers Amlogic Drivers updates for v5.18: - Add support for Amlogic S4 in meson-secure-pwrc power domain driver * tag 'amlogic-drivers-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings Link: https://lore.kernel.org/r/c7471989-d929-c744-c0c3-c8e86eaaa225@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-08Merge tag 'at91-soc-5.18-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers AT91 SoC #2 for 5.18: - SAMA5D29 variant to the SAMA5D2 family in SoC driver. * tag 'at91-soc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: add support in soc driver for new SAMA5D29 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency Link: https://lore.kernel.org/r/20220304144216.23340-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-07Merge tag 'v5.17-next-soc.2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers mmsys: fix compilation by adding SW reset infrastructure * tag 'v5.17-next-soc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data Link: https://lore.kernel.org/r/e1b90372-a041-db6e-f35a-d17b26069e40@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-07MAINTAINERS: update Krzysztof Kozlowski's emailKrzysztof Kozlowski
Use Krzysztof Kozlowski's @kernel.org account in maintainer entries. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220307172805.156760-1-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-07soc: s4: Add support for power domains controllerShunzhou Jiang
Add support s4 Power controller. In s4, power control registers are in secure domain, and should be accessed by smc. Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220307025357.1368673-3-shunzhou.jiang@amlogic.com
2022-03-04ARM: at91: add support in soc driver for new SAMA5D29Mihai Sain
Add detection of new SAMA5D29 by the SoC driver. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220302155329.27668-1-nicolas.ferre@microchip.com
2022-03-04soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver dataRex-BC Chen
There are different software reset registers for difference MTK SoCs. Therefore, we add a new variable "sw0_rst_offset" to control it. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220217082626.15728-2-rex-bc.chen@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
generated by cgit (git 2.34.1) at 2025-04-26 23:18:40 +0000