summaryrefslogtreecommitdiff
path: root/drivers/soundwire/intel_bus_common.c
AgeCommit message (Collapse)Author
2024-10-10soundwire: cadence: add soft-reset on startupPierre-Louis Bossart
Follow the recommended programming flows. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20241003094830.119673-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-18soundwire: intel_bus_common: enable interrupts before exiting resetPierre-Louis Bossart
The existing code enables the Cadence IP interrupts after the bus reset sequence. The problem with this sequence is that it might be pre-empted, giving SoundWire devices time to sync and report as ATTACHED before the interrupts are enabled. In that case, the Cadence IP will not detect a state change and will not throw an interrupt to proceed with the enumeration of a Device0. In our overnight stress tests, we observed that a slight sub-millisecond delay in enabling interrupts after the reset was correlated with detection failures. This problem is more prevalent on the LunarLake silicon, likely due to SOC integration changes, but it was observed on earlier generations as well. This patch reverts the sequence, with the interrupts enabled before performing the bus reset. This removes the race condition and makes sure the Cadence IP is able to detect the presence of a Device0 in all cases. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-18soundwire: cadence: re-check Peripheral status with delayed_workPierre-Louis Bossart
The SoundWire peripheral enumeration is entirely based on interrupts, more specifically sticky bits tracking state changes. This patch adds a defensive programming check on the actual status reported in PING frames. If for some reason an interrupt was lost or delayed, the delayed work would detect a peripheral change of status after the bus starts. The 100ms defined for the delay is not completely arbitrary, if a Peripheral didn't join the bus within that delay then probably the hardware link is broken, and conversely if the detection didn't happen because of software issues the 100ms is still acceptable in terms of user experience. The overhead of the one-shot workqueue is minimal, and the mutual exclusion ensures that the interrupt and delayed work cannot update the status concurrently. Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-06-21soundwire: Intel: clarify Copyright informationPierre-Louis Bossart
For some reason a number of files included the "All rights reserved" statement. Good old copy-paste made sure this mistake proliferated. Remove the "All rights reserved" in all Intel-copyright to align with internal guidance. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20240617121318.14037-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-29soundwire: intel/cadence: update hardware reset sequencePierre-Louis Bossart
Combining hardware reset with the multi-link mode leads to a shortened hardware reset pattern observed on the bus. The updated hardware programming sequence is to first enable the clock with the sync_arm/sync_go pattern, and only in a second step to issue the hardware reset sequence. Since there is no longer a dependency between sync_arm/sync_go and hw_reset, the behavior of sdw_cdns_exit_reset() is changed to wait for the self-clearing CONFIG_UPDATE to go back to zero, Link: https://github.com/thesofproject/linux/issues/4170 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230518024119.164160-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-29soundwire: intel_bus_common: enable interrupts lastPierre-Louis Bossart
It's not clear why we enabled interrupts in the Cadence IP first. The logical programming sequence should be to first start the bus, and only second to enable the interrupts. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230518024119.164160-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-29soundwire: intel_bus_common: update error logPierre-Louis Bossart
We use __func__ in all calls of sdw_cdns_check_self_clearing_bits(), except in one case. Likely an editing miss when the code was refactored. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230518024215.164281-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-15soundwire: intel: move bank switch routine to common intel_bus_common.cPierre-Louis Bossart
No functionality change, just moving the routines to a common file so that they can be used for new hardware. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230314015410.487311-11-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-15soundwire: intel: move bus common sequences to different filePierre-Louis Bossart
Now that the bus start/stop/clock_stop sequences use the ops, we can move them to a different file to reuse them. Note that we could in theory remove the abstraction for all those sequences and directly call the functions in intel_auxdevice.c. To allow for more flexibility and have means to special-case new platforms, we decided to keep the abstraction. If in time it becomes clear there is no benefit the abstraction will be simplified. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230314015410.487311-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>