summaryrefslogtreecommitdiff
path: root/drivers/soundwire/qcom.c
AgeCommit message (Collapse)Author
2022-07-06soundwire: qcom: Enable software clock gating requirement flagSrinivasa Rao Mandadapu
Enable software clock gating flag in private data for SC7280 based platforms, which are soundwire 1.6.0 version based. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> [vkoul: fix patch subystem tag] Link: https://lore.kernel.org/r/1656659827-27450-3-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06soundwire: qcom: Check device status before reading devidSrinivas Kandagatla
As per hardware datasheet its recommended that we check the device status before reading devid assigned by auto-enumeration. Without this patch we see SoundWire devices with invalid enumeration addresses on the bus. Cc: stable@vger.kernel.org Fixes: a6e6581942ca ("soundwire: qcom: add auto enumeration support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220706095644.5852-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06soundwire: qcom: Add flag for software clock gating checkSrinivasa Rao Mandadapu
Validate software clock gating required or not and do software clock gating on hclk if soundwire is operational and keep it running by adding flag in private data structure. This is to avoid conflict between older architectures, where software clock gating is not required and on latest architectures, where software clock gating is mandatory. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1656659827-27450-2-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06soundwire: qcom: Add support for controlling audio CGCR from HLOSSrinivasa Rao Mandadapu
Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Link: https://lore.kernel.org/r/1652877755-25120-1-git-send-email-quic_srivasam@quicinc.com [vkoul: change patch subsystem tag] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-09soundwire: qcom: adjust autoenumeration timeoutSrinivas Kandagatla
Currently timeout for autoenumeration during probe and bus reset is set to 2 secs which is really a big value. This can have an adverse effect on boot time if the slave device is not ready/reset. This was the case with wcd938x which was not reset yet but we spent 2 secs waiting in the soundwire controller probe. Reduce this time to 1/10 of Hz which should be good enough time to finish autoenumeration if any slaves are available on the bus. Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220506084705.18525-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-09soundwire: qcom: use pm_runtime_resume_and_get()Pierre-Louis Bossart
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and pm_runtime_put_noidle() pattern. No functional changes. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220426235623.4253-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-09soundwire: qcom: return error when pm_runtime_get_sync failsPierre-Louis Bossart
For some reason there's a missing error return in two places. Fixes: 74e79da9fd46a ("soundwire: qcom: add runtime pm support") Fixes: 04d46a7b38375 ("soundwire: qcom: add in-band wake up interrupt support") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220426235623.4253-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-05soundwire: qcom: Add compatible name for v1.6.0Srinivasa Rao Mandadapu
Update compatible string and master data information in soundwire driver to support v1.6.0 in lpass sc7280 based platform. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1646316128-21082-2-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-05soundwire: qcom: fix an error message in swrm_wait_for_frame_gen_enabled()Dan Carpenter
The logical AND && is supposed to be bitwise AND & so it will sometimes print "connected" instead of "disconnected". Fixes: 74e79da9fd46 ("soundwire: qcom: add runtime pm support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220307125814.GD16710@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-03soundwire: qcom: use __maybe_unused for swrm_runtime_resume()Srinivas Kandagatla
swrm_runtime_resume() would not be defined when CONFIG_PM=n This causes below build failure drivers/soundwire/qcom.c:1460:12: error: 'swrm_runtime_resume' defined but not used [-Werror=unused-function] Mark the resume swrm_runtime_resume() with __maybe_unused attribute. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220303110321.23666-1-srinivas.kandagatla@linaro.org [redo commit title and log] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-02soundwire: qcom: constify static struct qcom_swrm_data global variablesSrinivasa Rao Mandadapu
The qcom_swrm_data structures is only required for setting soundwire params, so make the qcom_swrm_data structure const to allow the compiler to put it in read-only memory and avoid unintentional modifications. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Link: https://lore.kernel.org/r/1646224982-3361-3-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-02soundwire: qcom: add in-band wake up interrupt supportSrinivas Kandagatla
Some of the Qualcomm SoundWire Controller instances like the ones that are connected to RX path along with Headset connections support Waking up Controller from Low power clock stop state using SoundWire In-band interrupt. SoundWire Slave on the bus would initiate this by pulling the data line high, while the clock is stopped. Add support to this wake up interrupt. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220228172528.3489-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-02soundwire: qcom: add runtime pm supportSrinivas Kandagatla
Add support to runtime PM using SoundWire clock stop Mode0 on supported controller instances and soft reset on instances that do not support clock stop. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220228172528.3489-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-14Merge tag 'char-misc-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ...
2021-12-24ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWirePierre-Louis Bossart
The HDAudio ASoC support relies on the set_tdm_slots() helper to store the HDaudio stream tag in the tx_mask. This only works because of the pre-existing order in soc-pcm.c, where the hw_params() is handled for codec_dais *before* cpu_dais. When the order is reversed, the stream_tag is used as a mask in the codec fixup functions: /* fixup params based on TDM slot masks */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && codec_dai->tx_mask) soc_pcm_codec_params_fixup(&codec_params, codec_dai->tx_mask); As a result of this confusion, the codec_params_fixup() ends-up generating bad channel masks, depending on what stream_tag was allocated. We could add a flag to state that the tx_mask is really not a mask, but it would be quite ugly to persist in overloading concepts. Instead, this patch suggests a more generic get/set 'stream' API based on the existing model for SoundWire. We can expand the concept to store 'stream' opaque information that is specific to different DAI types. In the case of HDAudio DAIs, we only need to store a stream tag as an unsigned char pointer. The TDM rx_ and tx_masks should really only be used to store masks. Rename get_sdw_stream/set_sdw_stream callbacks and helpers as get_stream/set_stream. No functionality change beyond the rename. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-23soundwire: qcom: remove redundant version number readSrinivas Kandagatla
Controller version is already available in struct qcom_swrm_ctrl, Just make use of it instead of reading this again. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116105017.12010-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-20soundwire: qcom: add debugfs entry for soundwire register dumpSrinivas Kandagatla
For debug purposes add an entry in debugfs to dump Qualcomm SoundWire Controller registers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210907105636.3171-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-13soundwire: qcom: fix handling of qcom,ports-block-pack-modeSrinivas Kandagatla
Support to "qcom,ports-block-pack-mode" was added at later stages to support a variant of Qualcomm SoundWire controllers available on Apps processor. However the older versions of the SoundWire controller which are embedded in WCD Codecs do not need this property. So returning on error for those cases will break boards like DragonBoard DB845c and Lenovo Yoga C630. This patch fixes error handling on this property considering older usecases. Fixes: a5943e4fb14e ("soundwire: qcom: check of_property_read status") Reported-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Link: https://lore.kernel.org/r/20210504125909.16108-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: handle return correctly in qcom_swrm_transport_paramsSrinivas Kandagatla
Looks like return from reg_write is set but not checked. Fix this by adding error return path. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503591 ("UNUSED_VALUE") Fixes: 128eaf937adb ("soundwire: qcom: add support to missing transport params") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210401091502.15825-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: cleanup internal port config indexingSrinivas Kandagatla
Internally used portconfig array for storing port bandwidth params starts from offset zero. However port zero is not really used and we also copy the bus parameters to offset zero. So basically we endup with a code which has to subtract 1 from port number to get to port parameters. This is bit confusing to the reader so, make this bit more obvious by only copying the parameters to offset 1 instead of zero. This will avoid doing -1 every time when we try to get port params. Similar thing has been recently done with din/dout_port_mask. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210401092454.21299-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: wait for fifo space to be available before read/writeSrinivas Kandagatla
If we write registers very fast we can endup in a situation where some of the writes will be dropped without any notice. So wait for the fifo space to be available before reading/writing the soundwire registers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210401090058.24041-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: add static port map supportSrinivas Kandagatla
SoundWire device ports are statically mapped to Controller ports during design. Add support to read these from SoundWire devices. This controller uses static port map info to setup bandwidth parameters for those ports. A generic port allocation is not possible in this cases! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210315165650.13392-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: update port map allocation bit maskSrinivas Kandagatla
currently the internal bitmask used for allocating ports starts with offset 0. This is bit confusing as data port numbers on Qualcomm controller are valid from 1 to 14. So adjust this bit mask accordingly, this will also help while adding static port map support. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210315165650.13392-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-01soundwire: qcom: use signed variable for error returnVinod Koul
We get warning of using a unsigned variable being compared to less than zero. The comparison is correct as it checks for errors from previous call to qcom_swrm_get_alert_slave_dev_num(), so we should use a signed variable here. While at it, drop the superfluous initialization as well drivers/soundwire/qcom.c: qcom_swrm_irq_handler() warn: impossible condition '(devnum < 0) => (0-255 < 0)' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331155520.2987823-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: wait for enumeration to be complete in probeSrinivas Kandagatla
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-10-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: add auto enumeration supportSrinivas Kandagatla
Qualcomm SoundWire controller supports Auto Enumeration of the devices within the IP. This patch enables support for this feature. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-9-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: add support to new interruptsSrinivas Kandagatla
Add support to new interrupts which includes reporting some of the error interrupts and adding support to SLAVE pending interrupt! This patch also changes the interrupt handler behaviour on handling any pending interrupts by checking it before returning out of irq handler. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-7-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: update register read/write routineSrinivas Kandagatla
In the existing code every soundwire register read and register write are kinda blocked. Each of these are using a special command id that generates interrupt after it successfully finishes. This is really overhead, limiting and not really necessary unless we are doing something special. We can simply read/write the fifo that should also give exactly what we need! This will also allow to read/write registers in interrupt context, which was not possible with the special command approach. With previous approach number of interrupts generated after enumeration are around 130: $ cat /proc/interrupts | grep soundwire 21: 130 0 0 0 0 0 0 0 GICv3 234 Edge soundwire after this patch they are just 3 interrupts $ cat /proc/interrupts | grep soundwire 21: 3 0 0 0 0 0 0 0 GICv3 234 Edge soundwire This has significantly not only reduced interrupting CPU during enumeration but also during streaming! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-6-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: start the clock during initializationSrinivas Kandagatla
Start the clock during initialization, doing this explicitly will add more clarity when we are adding clock stop feature. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-5-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: set continue execution flag for ignored commandsSrinivas Kandagatla
version 1.5.1 and higher IPs of this controller required to set continue execution on ignored command flag. This patch sets this flag. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: add support to missing transport paramsSrinivas Kandagatla
Some of the transport parameters derived from device tree are not fully parsed by the driver. This patch adds support to parse those missing parameters. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: check of_property_read statusPierre-Louis Bossart
Cppcheck complains: drivers/soundwire/qcom.c:773:6: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", ^ The return value is checked for all other cases, not sure why it was missed here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23soundwire: qcom: add missing \n in dev_err()Pierre-Louis Bossart
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323005855.20890-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-26soundwire: qcom: Fix build failure when slimbus is moduleVinod Koul
Commit 5bd773242f75 ("soundwire: qcom: avoid dependency on CONFIG_SLIMBUS") removed hard dependency on Slimbus for qcom driver but it results in build failure when: CONFIG_SOUNDWIRE_QCOM=y CONFIG_SLIMBUS=m drivers/soundwire/qcom.o: In function `qcom_swrm_probe': qcom.c:(.text+0xf44): undefined reference to `slimbus_bus' Fix this by using IS_REACHABLE() in driver which is recommended to be used with imply. Fixes: 5bd773242f75 ("soundwire: qcom: avoid dependency on CONFIG_SLIMBUS") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20201125055155.GD8403@vkoul-mobl Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18soundwire: qcom: get max rows and cols info from compatibleSrinivas Kandagatla
currently the max rows and cols values are hardcoded. In reality these values depend on the IP version. So get these based on device tree compatible strings. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200917120138.11313-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18soundwire: qcom: add support to block packing modeSrinivas Kandagatla
This patch adds support to block pack mode, which is required on Qcom soundwire controllers v1.5.x on few ports! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200917120138.11313-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18soundwire: qcom: clear BIT FIELDs before value set.Srinivas Kandagatla
According to usage (bitfields.h) of REG_FIELDS, Modify is: reg &= ~REG_FIELD_C; reg |= FIELD_PREP(REG_FIELD_C, c); Patch ("soundwire: qcom : use FIELD_{GET|PREP}") seems to have accidentally removed clearing bit field while modifying the register. Fix this by using u32p_replace_bits() to clear and set the values. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200917120138.11313-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-09soundwire: qcom: fix SLIBMUS/SLIMBUS typoJonathan Marek
Fix slimbus case being broken thanks to a typo. Fixes: 5bd773242f75 ("soundwire: qcom: avoid dependency on CONFIG_SLIMBUS") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200908140818.28373-1-jonathan@marek.ca Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07soundwire: qcom: add v1.5.1 compatibleJonathan Marek
Add a compatible string for HW version v1.5.1 on sm8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200905173905.16541-5-jonathan@marek.ca Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07soundwire: qcom: add support for mmio soundwire master devicesJonathan Marek
Adds support for qcom soundwire devices with memory mapped IO registers. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200905173905.16541-4-jonathan@marek.ca Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07soundwire: qcom: avoid dependency on CONFIG_SLIMBUSJonathan Marek
The driver may be used without slimbus, so don't depend on slimbus. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200905173905.16541-3-jonathan@marek.ca Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-07soundwire: qcom: fix abh/ahb typoJonathan Marek
The function name qcom_swrm_abh_reg_read should say ahb, fix that. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200905173905.16541-2-jonathan@marek.ca Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04soundwire: qcom : use FIELD_{GET|PREP}Vinod Koul
use FIELD_{GET|PREP} in qcom driver to get/set field values instead of open coding masks and shift operations. Also, remove now unused register shift defines Signed-off-by: Vinod Koul <vkoul@kernel.org> Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200903114504.1202143-6-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-22soundwire: qcom: Constify static structsRikard Falkeborn
qcom_swrm_port_ops and qcom_swrm_ops are not modified and can be made const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 18266 3056 256 21578 544a drivers/soundwire/qcom.o After: text data bss dec hex filename 18426 2896 256 21578 544a drivers/soundwire/qcom.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200609230029.69802-1-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: bus_type: add sdw_master_device supportPierre-Louis Bossart
In the existing SoundWire code, Master Devices are not explicitly represented - only SoundWire Slave Devices are exposed (the use of capital letters follows the SoundWire specification conventions). With the existing code, the bus is handled without using a proper device, and bus->dev typically points to a platform device. The right thing to do as discussed in multiple reviews is use a device for each bus. The sdw_master_device addition is done with minimal internal plumbing and not exposed externally. The existing API based on sdw_bus_master_add() and sdw_bus_master_delete() will deal with the sdw_master_device life cycle, which minimizes changes to existing drivers. Note that the Intel code will be modified in follow-up patches (no impact on any platform since the connection with ASoC is not supported upstream so far). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: bus: rename sdw_bus_master_add/delete, add argumentsPierre-Louis Bossart
In preparation for future extensions, rename functions to use sdw_bus_master prefix and add a parent and fwnode argument to sdw_bus_master_add to help with device registration in follow-up patches. No functionality change, just renames and additional arguments. The Intel code is currently unused, the two additional arguments are only needed for compilation. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11soundwire: qcom: Use IRQF_ONESHOTSamuel Zou
Fixes coccicheck error: drivers/soundwire/qcom.c:815:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1588735553-34219-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05soundwire: qcom: fix error handling in probePierre-Louis Bossart
Make sure all error cases are properly handled and all resources freed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200429185057.12810-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-03-20soundwire: qcom: add support for get_sdw_stream()Srinivas Kandagatla
Adding support to new get_sdw_stream() that can help machine driver to deal with soundwire stream. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200317092645.5705-1-srinivas.kandagatla@linaro.org [fix checkpatch error for "void * qcom_swrm_get_sdw_stream"] Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-03-23 12:59:25 +0000