summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-atmel.c
AgeCommit message (Collapse)Author
2021-10-01spi: atmel: Fix PDC transfer setup bugVille Baillie
atmel_spi_dma_map_xfer to never be called in PDC mode. This causes the driver to silently fail. This patch changes the conditional to match the behaviour of the previous commit before the refactor. Fixes: 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method") Signed-off-by: Ville Baillie <villeb@bytesnap.co.uk> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210921072132.21831-1-villeb@bytesnap.co.uk Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-11spi: atmel: Fix CS and initialization bugDan Sneddon
Commit 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method") switched to using transfer_one and set_cs. The core doesn't call set_cs when the chip select lines are gpios. Add the SPI_MASTER_GPIO_SS flag to the driver to ensure the calls to set_cs happen since the driver programs configuration registers there. Fixes: 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method") Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com> Link: https://lore.kernel.org/r/20210629192218.32125-1-dan.sneddon@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-03spi: atmel: Reduce spin lock usageDan Sneddon
The current implementation of the driver holds a spin lock for the duration of the transfer, releasing it only to enable interrupts for short periods of time. As this would prevent any interrupt from happening, this could cause system performance issues every time a SPI message is sent. Since the spi core now handles message syncronization we can reduce the amount of time the spin-lock is held to the regions where both the calling thread and the interrupt might interract. Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com> Link: https://lore.kernel.org/r/20210602160816.4890-2-dan.sneddon@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-03spi: atmel: Switch to transfer_one transfer methodDan Sneddon
Switch from using our own transfer_one_message routine to using the one provided by the SPI core. Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com> Link: https://lore.kernel.org/r/20210602160816.4890-1-dan.sneddon@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: atmel: Drop unused variableTudor Ambarus
The DMA cap mask is no longer used since: commit 7758e390699f ("spi: atmel: remove compat for non DT board when requesting dma chan") Drop it now. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210218132840.131898-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21spi: atmel: Put allocated master before returnPan Bian
The allocated master is not released. Goto error handling label rather than directly return. Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring") Signed-off-by: Pan Bian <bianpan2016@163.com> Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring") Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210120050025.25426-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-30spi: atmel: Downgrade to dev_dbg when dma_request_chan() failsTudor Ambarus
The IP's DMA capabilities are described in the SoC dtsi, to spare users duplicating the DMA bindings in their board device tree. Users that don't want to use DMA, have to overwrite the DMA bindings in their board device tree. An example is: commit ddcdaeb88242 ("ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions") When the DMA bindings are overwritten, one could see on the console: atmel_spi fc018400.spi: error -ENODEV: No TX DMA channel, DMA is disabled atmel_spi fc018400.spi: Atmel SPI Controller using PIO only Choosing to not use DMA is not a reason to print an error message. More, the user is already informed when PIO is used: "Atmel SPI Controller using PIO only". Downgrade to dev_dbg when dma_request_chan() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201030121116.869105-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-15Merge tag 'sound-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The amount of changes is smaller at this round (what a surprise), but lots of activity is seen. Most of changes are about ASoC driver development, especially Intel platforms. Here are some highlights: General: - Replace all tasklet usages with other alternatives - Cleanup of the ASoC error unwinding code - Fixes for trivial issues caught by static checker - Spell fixes allover the places ALSA Core: - Lockdep fix for control devices - Fix for potential OSS sequencer mutex stalls HD-audio and USB-audio: - SoundBlaster AE-7 support - Changes in quirk table for the rename handling - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2. ASoC: - Lots of updates for Intel SOF and SoundWire enablement - Replacement of the DSP driver for some older x86 systems; the new code was written from scratch, better maintenance expected - Helpers for parsing auxiluary devices from the device tree - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764" * tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits) ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close ALSA: hda: fix jack detection with Realtek codecs when in D3 ALSA: fireworks: use semicolons rather than commas to separate statements ALSA: hda: use semicolons rather than commas to separate statements ALSA: hda/i915 - fix list corruption with concurrent probes ASoC: dmaengine: Document support for TX only or RX only streams ASoC: mchp-spdiftx: remove 'TX' from playback stream name ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn ASoC: tas2764: Add the driver for the TAS2764 dt-bindings: tas2764: Add the TAS2764 binding doc ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled ASoC: stm32: dfsdm: add actual resolution trace ASoC: stm32: dfsdm: change rate limits ASoC: qcom: sc7180: Add support for audio over DP Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass:Update lpaif_dmactl members order Asoc:qcom:lpass-cpu:Update dts property read API ASoC: dt-bindings: Add dt binding for lpass hdmi ...
2020-10-01spi: atmel: Exposing effective spi speedThomas Kopp
This patch implements the reporting of the effectively used speed_hz for the transfer by setting xfer->effective_speed_hz. See the following patch, which adds this feature to the SPI core for more information: commit 5d7e2b5ed585 ("spi: core: allow reporting the effectivly used speed_hz for a transfer") Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200921071036.2091-1-thomas.kopp@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-30spi: atmel: remove unnecessary includeAlexandre Belloni
Since commit d5fab59cab18 ("spi: atmel: trivial: remove unused fields in DMA structure"), the driver is not using any definitions from linux/platform_data/dma-atmel.h, stop including it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200930145353.3043699-1-alexandre.belloni@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-08spi: atmel: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200901152713.18629-3-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09spi: atmel: remove redundant label out_freeColin Ian King
The error exit label out_free is no longer being used, it is redundant and can be removed. Cleans up warning: drivers/spi/spi-atmel.c:1680:1: warning: label ‘out_free’ defined but not used [-Wunused-label] Fixes: 2d9a744685bc ("spi: atmel: No need to call spi_master_put() if spi_alloc_master() failed") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200709101203.1374117-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-07spi: atmel: No need to call spi_master_put() if spi_alloc_master() failedPeng Fan
There is no need to call spi_master_put() if spi_alloc_master() failed, it should return -ENOMEM directly. Signed-off-by: Peng Fan <fanpeng@loongson.cn> Link: https://lore.kernel.org/r/1594111842-9468-1-git-send-email-fanpeng@loongson.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-30spi: atmel: Add missing annotation for atmel_spi_next_xfer_dma_submit()Jules Irenge
Sparse reports a warning at atmel_spi_next_xfer_dma_submit() warning: context imbalance in atmel_spi_next_xfer_dma_submit() - unexpected unlock The root cause is the missing annotation at atmel_spi_next_xfer_dma_submit() Add the missing __must_hold(&as->lock) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/20200429225723.31258-3-jbi.octave@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-16spi: atmel: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191212135550.4634-2-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-22Merge branch 'spi-5.5' into spi-nextMark Brown
2019-11-15spi: atmel: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20191113094256.1108-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: fix handling of cs_change set on non-last xferMans Rullgard
The driver does the wrong thing when cs_change is set on a non-last xfer in a message. When cs_change is set, the driver deactivates the CS and leaves it off until a later xfer again has cs_change set whereas it should be briefly toggling CS off and on again. This patch brings the behaviour of the driver back in line with the documentation and common sense. The delay of 10 us is the same as is used by the default spi_transfer_one_message() function in spi.c. [gregory: rebased on for-5.5 from spi tree] Fixes: 8090d6d1a415 ("spi: atmel: Refactor spi-atmel to use SPI framework queue") Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191018153504.4249-1-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Improve CS0 case support on AT91RM9200Gregory CLEMENT
Thanks to the recent change in this driver, it is now possible to prevent using the CS0 with GPIO during setup. It then allows to remove the special handling of this case in the cs_activate() and cs_deactivate() functions. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-8-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Improve and fix GPIO CS usageGregory CLEMENT
In the previous implementation of this driver, the index of the GPIO used as CS was linked to the offset of the CS register used to configure the transfer. With this new implementation the first CS register not used by internal CS is associated to all the GPIO CS. It allows to not be anymore limited to have only 4 CS managed, now it is possible to have in the same time until 3 internal CS and no more limit for the CS GPIO. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-7-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Remove platform data supportGregory CLEMENT
This driver is now only used through the device tree. Simplify code by explicitly depend on device tree. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-6-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Remove useless private fieldGregory CLEMENT
Since the conversion to GPIO descriptor, the GPIO used as chip select, can be directly access from the spi_device struct. So there is no need to keep the field npcs_pin. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-5-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Configure GPIO per CS instead of by controllerGregory CLEMENT
Instead of setting up the GPIO configuration for the whole controller, do it at CS level. It will allow to mix internal CS and GPIO CS, which is not possible with the current implementation. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-4-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Fix CS high supportGregory CLEMENT
Until a few years ago, this driver was only used with CS GPIO. The only exception is CS0 on AT91RM9200 which has to use internal CS. A limitation of the internal CS is that they don't support CS High. So by using the CS GPIO the CS high configuration was available except for the particular case CS0 on RM9200. When the support for the internal chip-select was added, the check of the CS high support was not updated. Due to this the driver accepts this configuration for all the SPI controller v2 (used by all SoCs excepting the AT91RM9200) whereas the hardware doesn't support it for infernal CS. This patch fixes the test to match the hardware capabilities. Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller") Cc: <stable@vger.kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-3-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Remove and fix erroneous commentsGregory CLEMENT
Since CSAAT functionality support has been added. Some comments become wrong. Fix them to match the current driver behavior. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-2-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-15spi: use new `spi_transfer_delay_exec` helper where straightforwardAlexandru Ardelean
For many places in the spi drivers, using the new `spi_transfer_delay` helper is straightforward. It's just replacing: ``` if (t->delay_usecs) udelay(t->delay_usecs); ``` with `spi_transfer_delay(t)` which handles both `delay_usecs` and the new `delay` field. This change replaces in all places (in the spi drivers) where this change is simple. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-10-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-15spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_deviceAlexandru Ardelean
This change does a conversion from the `word_delay_usecs` -> `word_delay` for the `spi_device` struct. This allows users to specify inter-word delays in other unit types (nano-seconds or clock cycles), depending on how users want. The Atmel SPI driver is the only current user of the `word_delay_usecs` field (from the `spi_device` struct). So, it needed a slight conversion to use the `word_delay` as an `spi_delay` struct. In SPI core, the only required mechanism is to update the `word_delay` information per `spi_transfer`. This requires a bit more logic than before, because it needs that both delays be converted to a common unit (nano-seconds) for comparison. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-8-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01spi: atmel: Remove AVR32 leftoverGregory CLEMENT
AV32 support has been from the kernel a few release ago, but there was still some specific macro for this architecture in this driver. Lets remove it. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190919154034.7489-1-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02spi: atmel: add tracing to custom .transfer_one_message callbackUwe Kleine-König
Driver specific implementations for .transfer_one_message need to call the tracing stuff themself. This is necessary to make spi tracing actually useful. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190801204710.27309-1-uwe@kleine-koenig.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30spi-atmel: support inter-word delayJonas Bonn
If the SPI slave requires an inter-word delay, configure the DLYBCT register accordingly. Tested on a SAMA5D2 board (derived from SAMA5D2-Xplained reference board). Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Mark Brown <broonie@kernel.org> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Ludovic Desroches <ludovic.desroches@microchip.com> CC: linux-spi@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09spi: atmel: Convert to use CS GPIO descriptorsLinus Walleij
This converts the Atmel SPI master driver to use GPIO descriptors for chip select handling. The Atmel driver has duplicate code to look up and initialize CS GPIOs from the device tree, so this is removed. It further has code to retrieve a CS GPIO from .controller_data but this seems to be completely unused in the kernel (legacy codepath?) so I deleted this support. It keeps track of polarity when switching the CS, but this is not needed anymore since we moved this over to the gpiolib. The local handling of the "npcs_pin" (I guess this might mean "negative polarity chip select pin") is preserved, but I strongly suspect this can be switched over to handling by the core and using the SPI_MASTER_GPIO_SS flag on the master to assure that the additional CS handling in the driver is also done. Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Radu Pirea <radu.pirea@microchip.com> Cc: Linuxarm <linuxarm@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-05spi: Do not print a message if spi_controller_{suspend,resume}() failsGeert Uytterhoeven
spi_controller_{suspend,resume}() already prints an error message on failure, so there is no need to repeat this in individual drivers. Note: spi_master_{suspend,resume}() is an alias for spi_controller_{suspend,resume}(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28spi: spi-atmel: Use correct enum for DMA transfer directionStefan Agner
Use enum dma_transfer_direction as required by the functions dmaengine_prep_slave_(sg|single)() instead of enum dma_data_direction. This won't change behavior in practice as the enum values are equivalent. This fixes two warnings when building with clang: drivers/spi/spi-atmel.c:771:12: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] DMA_FROM_DEVICE, ^~~~~~~~~~~~~~~ ... Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-27spi: atmel: init FIFOs before spi enableEugen Hristev
The datasheet recommends initializing FIFOs before SPI enable. If we do not do it like this, there may be a strange behavior. We noticed that DMA does not work properly with FIFOs if we do not clear them beforehand or enable them before SPIEN. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-01-05spi: atmel: Implements transfers with bounce bufferRadu Pirea
This patch enables SPI DMA transfers for Atmel SAM9 SoCs and implements a bounce buffer for transfers which have vmalloc allocated buffers. Those buffers are not cache coherent even if they have been transformed into sg lists. UBIFS is affected by this cache coherency issue. In this patch I also reverted "spi: atmel: fix corrupted data issue on SAM9 family SoCs"(7094576ccdc3acfe1e06a1e2ab547add375baf7f). Signed-off-by: Radu Pirea <radu.pirea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-19spi: atmel: fixed spin_lock usage inside atmel_spi_removeRadu Pirea
The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Radu Pirea <radu.pirea@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-03Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm63xx', ↵Mark Brown
'spi/topic/davinci' and 'spi/topic/imx' into spi-next
2017-06-23spi: atmel: fix corrupted data issue on SAM9 family SoCsCyrille Pitchen
This patch disables the use of the DMA for data transfer and forces the use of PIO transfers instead as a quick fixup to solve the cache aliasing issue on ARM9 based cores, which embeds a VIVT data cache. Indeed in the case of VIVT data caches, it is not safe to call dma_map_*() functions to map buffers for DMA transfers when those buffers have been allocated by vmalloc() or from any DMA-unsafe area. Further patches may propose a better solution based on the use of a bounce buffer at the SPI sub-system level but such solution needs more time to be discussed. Then the use of DMA transfers could be enabled again to improve the performances but before that, this patch already solves the issue. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-06-06spi: atmel: print version only after successful registrationBaruch Siach
Don't print the version at the beginning of atmel_spi_probe(). This avoids spamming the log whenever a deferred probe runs. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18spi: atmel: add deepest PM support to SAMA5D2Quentin Schulz
This adds deepest (Backup+Self-Refresh) PM support to the ATMEL SAMA5D2 SoC's SPI controller. When resuming from deepest state, it is required to restore MR register as the registers are lost since VDD core has been shut down when entering deepest state on the SAMA5D2. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12spi: atmel: factorize reusable code for SPI controller initQuentin Schulz
The SPI controller configuration during the init can be reused, for the resume function for example. Let's move this configuration to a separate function. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-12Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/ath79', ↵Mark Brown
'spi/topic/atmel' and 'spi/topic/axi' into spi-next
2016-11-25spi: atmel: remove the use of private channel fieldsNicolas Ferre
For DMA transfers, we now use the core DMA framework which provides channel fields in the spi_master structure. Remove the private channels from atmel_spi stucture which were located in a sub-structure. This last one (atmel_spi_dma) which is now empty is also removed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: trivial: remove unused fields in DMA structureNicolas Ferre
The atmel_spi_dma structure was cluttered with unused fields relative to older DMA channel selection API. Remove them. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: Use SPI core DMA mapping frameworkCyrille Pitchen
Use the SPI core DMA mapping framework instead of our own in case of DMA support. PDC support is not converted to this framework. The driver is now able to transfer a complete sg list through DMA. This eventually fix an issue with vmalloc'ed DMA memory that is provided for example by UBI/UBIFS layers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [nicolas.ferre@atmel.com: restrict the use to non-PDC DMA] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: Use core SPI_MASTER_MUST_[RT]X handlingNicolas Ferre
We need both RX and TX data for each transfer in any case (PIO, PDC, DMA). So convert the driver to the core dummy buffer handling with the SPI_MASTER_MUST_RX/SPI_MASTER_MUST_TX infrastructure. This move changes the maximum PDC/DMA buffer handling to 65535 bytes instead of a single page and sets master->max_dma_len to this value. All dummy buffer management is removed from the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: trivial: move info banner to latest probe actionNicolas Ferre
The info banner is here to tell that everything went well, so place it at the very end of the probe function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-15spi: atmel: Fix scheduling while atomicBen Whitten
A call to clk_get_rate appears to be called in the context of an interrupt, cache the bus clock for the frequency calculations in transmission. This fixes a 'BUG: scheduling while atomic' and 'WARNING: CPU: 0 PID: 777 at kernel/sched/core.c:2960 atmel_spi_unlock' Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-14spi: atmel: fix indenting in atmel_spi_gpio_cs()Dan Carpenter
These lines were indented one extra tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-27 17:20:29 +0000