summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-bcm63xx.c
AgeCommit message (Collapse)Author
2021-03-12spi: bcm63xx-spi: don't check 'delay_usecs' fieldAlexandru Ardelean
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-3-aardelean@deviqon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10spi: bcm63xx-spi: fix pm_runtimeÁlvaro Fernández Rojas
The driver sets auto_runtime_pm to true, but it doesn't call pm_runtime_enable(), which results in "Failed to power device" when PM support is enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210223151851.4110-2-noltari@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17spi: bcm63xx-spi: add reset supportÁlvaro Fernández Rojas
bcm63xx arch resets the SPI controller at early boot. However, bmips arch needs to perform a reset when probing the driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200616173235.3473149-2-noltari@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-15spi: bcm63xx: extend error condition to `delay` as wellAlexandru Ardelean
The driver errors out if `delay_usecs` is non-zero. This error condition should be extended to the new `delay` field, to account for when it will be used. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-19-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02spi: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-42-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-08spi/bcm63xx: fix error return code in bcm63xx_spi_probe()Gustavo A. R. Silva
platform_get_irq() returns an error code, but the spi-bcm63xx driver ignores it and always returns -ENXIO. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-21spi/bcm63xx: Fix checkpatch warningsAravind Thokala
This patch fixes the checkpatch.pl warnings on the driver file. Signed-off-by: Aravind Thokala <aravind.thk@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21spi/bcm63xx: fix typo in bcm63xx_spi_max_length breaking compilationJonas Gorski
Fix compilation by renaming argument dev to spi as expected by the code. Fixes the following error: drivers/spi/spi-bcm63xx.c: In function ‘bcm63xx_spi_max_length’: drivers/spi/spi-bcm63xx.c:434:50: error: ‘spi’ undeclared (first use in this function) struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); ^~~ Fixes: 0135c03df914 ("spi/bcm63xx: make spi subsystem aware of message size limits") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21spi/bcm63xx: allow for probing through devicetreeJonas Gorski
Add required binding support to probe through device tree. Use the compatible instead of the resource size for identifiying the block type, and allow reducing the number of cs lines through OF. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-21spi/bcm63xx: make spi subsystem aware of message size limitsJonas Gorski
The bcm63xx SPI controller does not allow manual control of the CS lines and will toggle it automatically before and after sending data, so we are limited to messages that fit in the FIFO buffer. Since the CS lines aren't available as GPIOs either, we will need to make slave drivers aware of this limitation so they can handle them accordingly. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-11Merge remote-tracking branches 'spi/topic/bcm63xx', 'spi/topic/butterfly', ↵Mark Brown
'spi/topic/cadence' and 'spi/topic/davinci' into spi-next
2015-11-16spi: bcm63xx: use correct format string for printing a resourceArnd Bergmann
With a 64-bit resource_size_t, we get a build warning on bcm63xx_spi_probe: drivers/spi/spi-bcm63xx.c:565:16: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=] As we are printing a resource, we can just use the %pr format specifier that pretty-prints the address and avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16spi/bcm63xx: Move default clock configuration to kill compiler warningGeert Uytterhoeven
drivers/spi/spi-bcm63xx.c: In function ‘bcm63xx_spi_setup_transfer’: drivers/spi/spi-bcm63xx.c:207: warning: ‘clk_cfg’ may be used uninitialized in this function While this is a false positive, it can easily be avoided by selecting the default clock configuration first. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23spi/bcm63xx: move register definitions into the driverJonas Gorski
Move all register definitions and structs into the driver. This allows us dropping the platform_data struct and drop any arch specific includes. Make use of different device names to identify the version of the block we have. Since we now have full control over the message width, we can drop the size check, which was broken anyway, since it never set ret to any error code. Also since we now have no arch depedendent resources, we can now allow compiling it for any arch, hidden behind COMPILE_TEST. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-12spi/bcm63xx: move message control word description to register offsetsJonas Gorski
Make the message control word parameters part of the register offsets array so we have them all in one struct. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-12spi/bcm63xx: fix standard accessors and compile guardJonas Gorski
Use the correct guard CONFIG_CPU_BIG_ENDIAN and the *be accessors to follow native endianness on big endian systems. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi/bcm63xx: replace custom io accessors with standard onesJonas Gorski
Replace all bcm_read* with (io)read. Due to this block following system endianness, make sure we match that. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi/bcm63xx: hardcode busnum to 0Jonas Gorski
We always pass 0 as the spi bus number, so we might as well hard code it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi/bcm63xx: always use a fixed number of CSJonas Gorski
We always pass 8 for the number of chip selects, so we can as well hardcode it to this number. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14spi/bcm63xx: remove unused rx_tail variableJonas Gorski
Fixes the following warning: drivers/spi/spi-bcm63xx.c:125:5: warning: unused variable 'rx_tail' [-Wunused-variable] u8 rx_tail; ^ Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-04-14spi: Remove unneeded include of linux/workqueue.hAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/init', ↵Mark Brown
'spi/topic/mpc512x-psc', 'spi/topic/mpc52xx', 'spi/topic/mxs', 'spi/topic/nuc900', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/bus-num', 'spi/topic/cleanup', ↵Mark Brown
'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/completion' and 'spi/topic/davinci' into spi-next
2014-03-25spi: bcm63xx: Remove unused define for PFXAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10spi: Use reinit_completion at appropriate placesAxel Lin
Calling init_completion() once is enough. For the rest of the iterations, call reinit_completion() instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23Merge remote-tracking branches 'spi/topic/bcm2835', 'spi/topic/bcm63xx', ↵Mark Brown
'spi/topic/bcm63xx-hsspi', 'spi/topic/bitbang', 'spi/topic/bpw', 'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/davinci', 'spi/topic/dw' and 'spi/topic/falcon' into spi-linus
2013-12-17spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove()Wei Yongjun
Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm63xx: use devm_spi_register_master()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: fix pm sleep supportJonas Gorski
Use the correct symbol to guard the callbacks and use appropriate defines for setting up the ops struct. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: check return value of clk_prepare_enableJonas Gorski
Ensure we notice if the clock cannot be enabled for any reason and pass the error down. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: don't reject reads >= 256 bytesJonas Gorski
The rx_tail register is only 8 bit wide, so it will wrap around after 256 read bytes. This makes it rather meaningless, so drop any usage of it to not treat reads over 256 as failed. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi: bcm63xx: Use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17spi/bcm63xx: don't substract prepend length from total lengthJonas Gorski
The spi command must include the full message length including any prepended writes, else transfers larger than 256 bytes will be incomplete. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-11-15spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove()Wei Yongjun
Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm63xx: use devm_spi_register_master()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26spi: bcm63xx: use devm_spi_register_master()Jingoo Han
Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01Merge remote-tracking branch 'spi/topic/qspi' into spi-nextMark Brown
2013-09-01Merge remote-tracking branch 'spi/topic/pdata' into spi-nextMark Brown
2013-08-29spi: Use dev_get_drvdata at appropriate placesAxel Lin
Use dev_get_drvdata() instead of platform_get_drvdata(to_platform_device(dev)). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29spi: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14spi/spi-{bcm63xx.c,bfin-v3.c}: simplify use of devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29spi/bcm63xx: Convert to core runtime PMMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-26Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2013-05-29spi: convert drivers to use bits_per_word_maskStephen Warren
Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13spi: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi/bcm63xx: remove unused speed_hz variableJonas Gorski
speed_hz is a write only member, so we can safely remove it and its generation. Also fixes the missing clk_put after getting the periph clock. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: use devm_ioremap_resource()Jonas Gorski
Use devm_ioremap_resource() which provides its own error messages. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: inline hz usage in bcm63xx_spi_setup_transferJonas Gorski
bcm63xx_spi_setup_transfer is called from only one place, and that has t always set, to hz will always be t->speed_hz - just use it directly in the two places instead of moving it in a local variable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>