summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-dw-pci.c
AgeCommit message (Collapse)Author
2016-05-11spi: dw-pci: Spelling s/paltforms/platforms/gGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw-pci: remove unused pdev member from struct dw_spi_pciAndy Shevchenko
The pdev member is not used anywhere, thus remove it. Moreover struct dw_spi_pci becomes an equivalent of struct dw_spi and therefore remove entire struct dw_spi_pci. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24spi: dw-pci: correct number of chip selectsAndy Shevchenko
The commit d58cf5ff6500 brought a second controller to the list of supported devices and changed a number of the chip selects. Besides the previous number was wrong anyway the mentioned patch makes it wrong again meanwhile has a proper numbers in the commit message. Indeed, SPI1 has 5 bits and SPI2 has 2 bits, but it does not mean to have power of two of this bits as a possible number of the chip selects. So, this patch fixes it eventually. Fixes: d58cf5ff6500 (spi: dw-pci: describe Intel MID controllers better) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-27spi: dw-mid: get a proper clock frequency for SPI2Andy Shevchenko
The clock information is being kept in the custom register on Intel MID platforms. Each controller has its own dedicated custom register for that. Thus, to get a proper frequency we have to read value from the specific offset to the register block. This patch makes this happen. Fixes: d58cf5ff6500 (spi: dw-pci: describe Intel MID controllers better) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07spi: dw-pci: describe Intel MID controllers betterAndy Shevchenko
There are more that one SPI controller on the Intel MID boards. This patch describes the status and IDs of them. From now on we also have to care about bus number that must be unique per host. According to the specification the SPI1 has 5 bits for chip selects and SPI2 only 2 bits. The patch makes it depend to PCI ID. The first controller (SPI1) is DMA capable, meanwhile SPI2 can share same channels (via software switch) such functionality is not in the scope of this patch. Thus, attempt to init DMA for SPI2 will always fail for now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-03Merge remote-tracking branches 'spi/topic/davinci', 'spi/topic/doc', ↵Mark Brown
'spi/topic/dw' and 'spi/topic/fsl' into spi-next
2014-09-01spi: dw-pci: remove FSF address and update copyrightAndy Shevchenko
The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: provide platform specific data via driver_dataAndy Shevchenko
Instead of checking for device and vendor IDs inside probe function let's provide a helper function via driver_data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: convert to use dev_pm_opsAndy Shevchenko
Convert system PM callbacks to use dev_pm_ops. In addition remove the PCI calls related to a power state since the bus code cares about this already. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: apply pci_bar and re-use pci_nameAndy Shevchenko
Nevertheless pci_bar is 0 let's explicitly use it when map IO regions. While here, use pci_name instead of dev_name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: move info message at the end of probeAndy Shevchenko
Let's print info message when controller is found and properly initialized. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-27spi: dw-pci: fix bug when regs left uninitializedAndy Shevchenko
The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-23Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/gpio', ↵Mark Brown
'spi/topic/hspi', 'spi/topic/mpc512x', 'spi/topic/msiof', 'spi/topic/nuc900', 'spi/topic/oc-tiny', 'spi/topic/omap', 'spi/topic/orion' and 'spi/topic/pci' into spi-linus
2014-01-07spi: dw-pci: remove free for resources allocated with devm_*Wei Yongjun
It's not necessary to free resources allocated with devm_* and free them may lead to double free. Fixes: 04f421e7b0b1 ('spi: dw: use managed resources') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06spi: dw-pci: fix typoBaruch Siach
Commit 04f421e7b0b10 (spi: dw: use managed resources) introduced a typo in struct field reference. Fix it. Fixes build failure: drivers/spi/spi-dw-pci.c: In function 'spi_pci_probe': drivers/spi/spi-dw-pci.c:50:29: error: 'dev' undeclared (first use in this function) dwpci = devm_kzalloc(&pdev-dev, sizeof(struct dw_spi_pci), GFP_KERNEL); ^ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw: use managed resourcesBaruch Siach
Migrate mmio code and core driver to managed resources to reduce boilerplate error handling code. Also, handle clk_enable() failure while at it, and drop unused dw_spi iolen field. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03spi: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-14spi: dw-pci: Use dev_info() instead of printk()Jingoo Han
Change raw printk() call to dev_info() to provide a better message to userspace so it can properly identify the device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: dw-pci: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-10spi: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/spi/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31spi: Add module.h to implicit users in drivers/spiPaul Gortmaker
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-06spi: reorganize driversGrant Likely
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>